Used Robodrill for sale (41)

Condition: excellent (used), Year of construction: 2018, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: P128YH003, travel distance X-axis: 710 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller model: Fanuc 31i-B5, rotational speed (max.): 10,000 rpm, overall weight: 2,100 kg, number of spindles: 1, number of slots in tool magazine: 21, mount diameter: 40 mm, input voltage: 250 V, type of input current: three-phase, Equipment: CE marking, USB port, documentation/manual, type plate available, 4-axis CNC milling machine, original DDR rotary table, 21 tools, reinforced spindle 10,000 rpm, Fanuc 31i-B5m controller, table travel 700 x 400 x 330 mm Iedpjw T S Niefx Ag Doa

Condition: good (used), Year of construction: 2007, Fanuc Robodrill T 21 iF, year of manufacture 2007, Fanuc 31 i A5 control, travel X/Y/Z 500/400/300 mm, spindle speed up to 24,000 rpm, 16-position tool changer, BT - AD 30 interface, accessories, 12,500 spindle hours, spindle replaced in 2016, Renishaw contact tool probe. Isdexwt Rzopfx Ag Doa

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: P082WG406, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel distances X-axis: 500 mm Y-axis: 400 mm Z-axis: 330 mm Spindle speed: max. 10,000 rpm Rapid traverse (axes): max. 54 m/min Table & Loads Permissible table load: 300 kg Maximum tool weight: max. 2 kg Maximum total tool weight: max. 23 kg Isdpsxxvi Ajfx Ag Dsa Tool dimensions Overall length: 200 mm Shank length: 120 mm Tool diameter: 80 mm Maximum height: 440 mm MACHINE DETAILS Weight: 2,100 kg Mains supply: 3-phase Power rating: 11 kVA

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs Iodpfx Agjtnh Alo Dea POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: used, Year of construction: 2003, A one owner and well maintained 2003 built Fanuc RoboDrill T21iD with Fanuc 16iMB control, BT30 10,000RPM Spindle, 21 Tool ATC, Nikken 4th Axis Head, Zero Point sub plate, machine vice & coolant equipment. Very clean machine! Specification: X Axis Travel 500 mm Y Axis Travel 400mm Z Axis Travel 350mm Table Size 650 x 400mm Table Load 250 Kgs Spindle Taper BT-30 Max. Speed 10,000RPM Motor Power 7.5 KW ATC Tool Capacity 21 stations CNC Control Fanuc 16i-MB Isdpfx Agexqdvuj Dsa Rapid Traverse 54 m/min Machine Weight Approximately 2,000 kg Control: Fanuc 16i MB Spec: Travels 500mm x 400mm x 330mm 10,000 RPM Accessories: Nikken 4th Axis Head, Zero Point sub plate, machine vice

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A04B-0105-B133#BBH, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 10,000 rpm, rapid traverse X-axis: 54 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 54 m/min, table width: 850 mm, table length: 410 mm, type of input current: three-phase, table load: 300 kg, overall weight: 2,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, We have 2x Fanuc Robodrill a-D21MiB5 plus units that we no longer use. They are too lightweight for our intended applications. We prefer to make someone else happy with the machines. Some specs below: • Year of manufacture: 2022-03 and 2022-06 • Large chip tray (non-standard) • High-pressure pump for through-spindle coolant (non-standard) • Extraction unit • Low operating hours Iodpoxwiglsfx Ag Dsa • Always serviced by Humacs Krabbendam • Dataserver in both machines (FTP accessible) (non-standard) • All toolholders as shown in the photo • Fanuc program transfer tool (software) • Manuals Note: We have moved the Renishaw probes to our other machines. The listed price is per unit.

Condition: ready for operation (used), Year of construction: 1994, Control Unit Brand FANUC Iodpjxqtaiofx Ag Dea Model Series 16-M Movement X-Axis Movement 400 Y-Axis Movement 300 Z-Axis Movement 300 This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: like new (used), FANUC ROBODRILL α-D21SiB5, 4th axis Iedpfx Agexxkzas Doa

Condition: used, Year of construction: 2015, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm Iedpfx Ageugpk Us Doa control: FANUC 31i B5 tool change unit: 21 fach rapid traverse in x-y-z axis: 54 m/min taper ISO: BT 30 turning speed range:: 10.000 1 / min spindle drive: 11 / 3,7 kW max. table load: 300 kg surface area: 600x 400 mm Dimensions (L/W/H): 1,6 x 2,1 x 2,25 m rapid traverse: 48 m/min total power requirement: 11 kVA weight of the machine ca.: 2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run" *

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 24.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2325 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : LEHMANN * model : Serie 500 - Coolant tank * with high-pressure pump : 70 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : HEXAGON - Workpiece probe : HEXAGON - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer Isdpfexx Dacjx Ag Dsa - Chuck 3 jaws : SCHUNK

Condition: good (used), Year of construction: 2009, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL SPECIFICATIONS Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2009 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 24,000 rpm Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter at 150–12,000 rpm: 80 mm Max. tool diameter at 12,000–15,000 rpm: 60 mm Max. tool diameter at 15,000–20,000 rpm: 45 mm Max. tool diameter at 20,000–24,000 rpm: 40 mm Permissible table load: 300 kg SCOPE OF DELIVERY Includes (not limited to): CNC machining center Fanuc Robodrill α-T21iFa Rotary unit for 4th and 5th axis Iodpfexflr Hjx Ag Doa Coolant pump and chip tray Exact scope of delivery according to photo series The Fanuc Robodrill α-T21iFa, built in 2009, is a versatile CNC machining center equipped with an additional 4th and 5th axis through the integrated rotary unit. This extension enables demanding multi-axis machining applications and significantly increases production flexibility. With a spindle speed of up to 24,000 rpm and travels of 500 x 400 x 330 mm, this machine provides ideal conditions for precise milling operations with high productivity. The 21-position tool magazine reduces setup times and allows for rapid tool changes. Thanks to its robust construction, a table load capacity of up to 300 kg, and the powerful Fanuc 31i control unit, this machine is perfectly suited for both series production and complex single parts. The integrated coolant system ensures process reliability and long tool life. No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: like new (used), Year of construction: 2017, operating hours: 3,800 h, functionality: fully functional, Controller FANUC 31i Model B5 Table size 850 x 410 mm Max. table load 300 kgs X travel 700 mm Y travel 400 mm Z travel 330 mm A axis C axis 0 - 360 degree Iedpfoxtwxhsx Ag Doa Distance between table surface and spindle end 250 - 580 mm Max. tool length 250 mm Max. tool diameter D80 mm Max spindle speed 24000 rpm Rapid speed X/Y/Z 54 m/min Feedrate 30 m/min ATC magazin 21-fold Tool holder type BBT30 Weight 2300 kgs Accessories, featureies - 4/5 axis with round table - RENISHAW TS27 tool presetter system - RENISHAW OMP60 zero point setting system - Chip conveyor - Coolant unit - Manuals The machine has been used little and the condition is like new. Ready to buy.

Condition: ready for operation (used), Year of construction: 2013, Control Unit Isdpfx Asxz H Izeg Dsa Brand FANUC Main Drive Number of axis 4 Spindle Speed 10000 RPM Movement X-Axis Movement 700 mm Z-Axis Movement 330 mm Y-Axis Movement 400 mm This 4-axis FANUC Robodrill Alfa-D21LiA5 was manufactured in 2013. It features a travel range of X: 700 mm, Y: 400 mm, Z: 330 mm, and a spindle speed of 10000 rpm. The tool magazine holds 21 tools with rapid feeds up to 54000 mm/min in X and Y, and 48000 mm/min in Z. Consider the opportunity to buy this FANUC Robodrill Alfa-D21LiA5 vertical machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Fanuc Robodrill T14iA Vertical Machining Centre for sale. 1998 model with 8,000 rpm spindle and 14 tool ATC. SPECIFICATION Traverses X Axis 500mm Y Axis 380mm Z Axis 300mm Spindle Nose to Worktable Minimum 250mm Maximum 550mm Work Table Table working surface 650 x 400mm Table loading capacity (uniform load) 200kg Table surface configuration Number of T slots 3 Width 14mm Pitch 125mm Ijdpfx Agenq Dguj Dea Machine Dimensions Width 1550mm Depth 1900mm Height (min/max) 2067 / 2367mm Weight (approximately) 2100kg Spindle Speed range 100 – 8,000rpm Taper BT30 Feedrates Rapid traverse rate 48m/min Feedrate 1 – 30,000mm/min Toolchanger ( MAS BT30 Tools) Tool storage capacity 14 tools Tool change time – cut to cut 0.9 secs (2kg) Tool Diameter 80mm Tool Length 200mm Tool Weight 2Kg Coolant tank capacity 100 litres CNC Control System Fanuc Series 16iM Electrical Supply 415V, 3 ph , 50Hz Compressed Air Supply 5kgf/cm2 (100 litres/min) MACHINE EQUIPPED WITH:- Coolant system Lighting Enclosed guarding

Condition: new, Year of construction: 2022, High-performance vertical machining center FANUC Robodrill α-D21LiB5 ADVANCED Control: FANUC 31i-B5 Travel X / Y / Z: 700 / 400 / 400 mm Distance spindle nose - table: 180 - 580 mm Clamping surface: 850 x 410 mm Max. Table load: 400 kg Max. Spindle speed: 24,000 1/min Spindle power 1 min / S1: 26 / 5.5 kW Torque 1 min / S1: 35 / 7.5 Nm Programmable feed rate: 30,000 mm/min Rapid traverse all axes: 54 m/min Acceleration X / Y / Z: 1.4 / 1.0 / 1.6 G (with table load 100 kg, tool 2 kg) Number of tool positions: 21 Tool holder: BBT 30 Max. Tool length: 250 mm Max. Tool diameter: 80 mm Max. Tool weight: 4 kg Tool change from chip to chip: 1.3 s (with tool weight 2 kg) Positioning accuracy (ISO 230-2): < 0.006 mm Repeat accuracy (ISO 230-2): < 0.004 mm Automatic side door right Machine door Transformer AI - Contour control II TWP - Indexing command for tilted working plane Iedog If Sgopfx Ag Dsa High Speed Smooth TCP Original FANUC warranty 12 months

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 24.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie Ijdpfx Agexx A U Se Dja - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2325 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : LEHMANN * model : Serie 500 - Coolant tank * with high-pressure pump : 70 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : HEXAGON - Workpiece probe : HEXAGON - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer - Chuck 3 jaws : SCHUNK

Condition: good (used), Year of construction: 2010, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2010 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel X-axis: 300 mm Travel Y-axis: 300 + 100 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Permissible table load: 200 kg Machine weight: 2,050 kg Ijdpfx Aoxflvfsg Dja Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes, among others (list not exhaustive): - CNC machining center Fanuc Robodrill α-T21iFa - 4th axis rotary table - Coolant pump and chip tray Exact scope of delivery as per photo documentation No guarantee is given for the correctness, completeness or currency of the information provided.

Condition: excellent (used), Year of construction: 2014, operating hours: 21,800 h, functionality: fully functional, machine/vehicle number: P147YH288, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (min.): 24,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 21, Equipment: chip conveyor, documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Ijdexnhvyjpfx Ag Doa

Condition: ready for operation (used), Year of construction: 2014, Main Drive Spindle speed range 21000 Number of axis 4 Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Z-Axis Movement 330 mm This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Isdpfjxpyymex Ag Dsa Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, A CNC drilling and tapping center Fanuc is available. Travel X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 250mm-580mm, axes: 5, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle taper: BT30, speed: 24000rpm, power: 26kW, torque: 35Nm, rapid traverse: 54m/min, feed rate: 30m/min, tool positions: 21, max. tool diameter: 80mm, max. tool length: 250mm, positioning accuracy: +/-0.006mm, repeatability: +/-0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/2100mm/2300mm, weight: approx. 2100kg, control: Fanuc, operating hours: 25320h. Including coolant tank MCO with band filtration system and scraper conveyor, M&H 3D probe, Fanuc zero-point option, and spare spindle. Documentation available. An on-site inspection is possible. Expected to be available starting December 2026. Ijdpfjxlitzsx Ag Doa

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Travel paths Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Admissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Iodpfx Asxflxajg Dsa Includes (not exhaustive): CNC Machining Center Fanuc Robodrill α-T21iFa Coolant pump and chip tray Exact scope of delivery as per photo series The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness, or currency of the information provided.

Condition: excellent (used), Year of construction: 2017, operating hours: 15,200 h, functionality: fully functional, machine/vehicle number: P172ZH357, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (min.): 24,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 21, Equipment: chip conveyor, documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Ijdpfxexnhtlj Ag Dea

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,500 h, Control Unit Brand FANUC Model Series 16i-MB Main Drive Tool taper BT30 Number of axis 4 Turret Number of turrets 1 Tools Isdpfxexlu U Ds Ag Dja Number of index 14 This 4-axis FANUC Robodrill Alpha-T14 iD was manufactured in 2004. It features a BT30 spindle taper, a 14-tool turret, and a table size of 750 x 380 mm. Equipped with a Fanuc series 16i-MB control system and a 4th axis by Yukiwa. Running time stands at 23,500 hours. If you are looking to get high-quality milling capabilities consider the FANUC Robodrill Alpha-T14 iD machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Serial Number: A04B-0102-B114#BDH Year of Manufacture: 2013 CNC Control: Fanuc Series 31i-MODEL B5 Spindle Speed: up to 24,000 rpm Travel X-Axis: 300 mm Travel Y-Axis: 300 + 100 mm Travel Z-Axis: 330 mm Rapid Traverse Rate: 54 m/min Tool Magazine: 21 positions Max. Tool Weight: 2 kg Ijdsxflq Aspfx Ag Dsa Total Tool Weight: 23 kg Max. Tool Diameter at 150–12,000 rpm: 80 mm Max. Tool Diameter at 12,000–15,000 rpm: 60 mm Max. Tool Diameter at 15,000–20,000 rpm: 45 mm Max. Tool Diameter at 20,000–24,000 rpm: 40 mm Permissible Table Load: 200 kg Machine Weight: 2,050 kg Power Supply: 200/220 V SCOPE OF DELIVERY Includes (list not exhaustive): • Fanuc Robodrill α-D21SiA5 Machining Center • 4th Axis Rotary Table • Coolant Pump and Chip Tray • Exact scope as per photo series No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand FANUC Model 31i model B5 Main Drive Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 400 mm Z-Axis Movement 330 mm Workpiece Workpiece weight 300 kg Table Outer length 850 mm Outer width 410 mm Tools Slots in storage 21 Additional Equipment Chip conveyor: A carpet This 4-axis FANUC Robodrill Alpha-D21LiB5 was manufactured in 2016. A vertical machining center featuring a 4th axis continuous table, spindle speeds up to 10,000 rpm, and a high-pressure system through the spindle at 15 bar. With less than 2000 working hours, it includes a tool magazine with a capacity of 21 and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the FANUC Robodrill Alpha-D21LiB5 machine we have for sale. Contact us for more information. Iedpoxpyxvsfx Ag Dsa Application Types Milling