Used Roberine 1503 for sale (52)

Condition: ready for operation (used), Indramat KDA 3.3-150-3-A00-W1 AC main spindle drive MNR: R911257443 SN:256355-02941, used, normal signs of wear, 100% functional, scope of delivery as per photos. Cgsdpfx Ajx Dw Haogzep

Condition: ready for operation (used), Indramat KDA 3.3-150-3-A00-W1 AC main spindle drive SN:256355-01253, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per the photos. Csdpsx Dw Hgofx Agzogp

Condition: new, machine/vehicle number: 068983c41e44eb5660fa9100c, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 435/50 r19,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins X-tra Long, with 15030 mm internal length Outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm Extension ladder at the rear Door retainer at the side Cgsdpfx Aji Riwusgzjp 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle Impact protection at the rear Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system AAC Basic, automatic relief axle acting on last axle, as maneuvering aid, up to 20 km/h, can be switched off manually Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 435/50 R19.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Side amber LED lighting coupled with the blinker Flashing side lights Side lights 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions 3 pairs of sliding stanchions can be moved along the entire length, with 4-fold pockets and with long pocket at the bottom. 3 pairs of stanchion positions Insertion slats 5 rows of wooden slats Rear wall / rear corner stanchions Rear corner stanchions steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Stainless steel tension locks Roof Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof rail when loading and unloading EcoLift - lifting roof can be raised by approx. 380 mm, on both sides, with gas pressure damper support, 3 driving positions at the front: Front interior height approx. 2900 mm / 2950 mm / 3000 mm, adjusted to approx. 3000 mm Optimum rain strip at the rear, at the top of the end bows,

Condition: like new (used), Technical data: Drive motors/ motor Quantity: 6 pieces available Manufacturer: SEW Movimot Type: MM150-503-00 18215033 condition: used, unused Output: KW 1,5 Cjdpfx Asf N Hf Segzegp Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods we are your competent partner! We would be pleased to make you an individual offer or advise you on the conception or installation questions. Just let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of experts. For companies in a wide range of industries, such as: logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully implemented projects. Together we will develop ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used 3-meter CNC press brake from Bystronic Model: PR 150 3100 Capacity: 3100 x 150 tons CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2 Cybelec ModEva 12 CNC control Hydraulic upper clamping RFA Csdpexp Rftofx Agzsgp Hydraulic lower clamping WILA 13 mm Year of manufacture: 2006

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Used Reifenhäuser extruder Type: RH-241-1-50-30 WE Grooved feeding zone With manual screen changer Fully functional Cjdpfx Agew Np Tkezjgp

Year of construction: 1993, condition: good (used), functionality: fully functional, used REIFENHÄUSER single-screw extruder Cgjdpfxepy Eygj Agzsp with screw size : diameter 50 mm x 33v grooved feed zone and degassing zone type RH 241-1-50-30v with DC-drive 30,2 kW year 1993 with installed switch cabinet Fully functional

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06-00376, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 150 mm, Manufacturer: Werth Messtechnik GmbH Type / Model: Scope-Check 400 × 400 × 150 3D CNC Machine Type: Multi-sensor Coordinate Measuring Machine (optical / tactile) • Year of Manufacture: 2006 • Serial Number: 06-00376 Condition • Used, well-maintained overall condition • Machine was fully operational in measurement use until recently • Regular calibrations documented • No visible damage to granite, guides, or measurement system Accessories / Delivery Scope • Granite-based machine with measurement glass and protective cover • CNC control with Scope controller • Renishaw probe (multiple stylus inserts included) • PC workstation comprising: • Computer • Monitor(s) • Keyboard, mouse • Control panel / joystick • Documentation: Cjdpfx Agjx Sw R Dozogp • User manuals (WinWerth) • Calibration and inspection reports • Folder with machine and measurement room documentation • Software and calibration data carriers (CD/DVD) • Integrated control cabinet with main switch Application Area • Form and position tolerance inspection • Dimensional inspection of: • Sheet metal forming parts • Turned and milled components • Tools • Prismatic and rotationally symmetric parts The unit is currently still installed and powered. An inspection while operational is possible by appointment. Dismantling, loading, and transport are to be carried out and borne by the buyer. • Measuring range (X/Y/Z): 400 × 400 × 150 mm • Control: CNC • Software: WinWerth, version 8.40 or higher (data carrier included) • Tool holder / probe: Renishaw, MK 2 • Probe system: Renishaw Probe Interface PI 200 • Measurement accuracy: • Length measurement deviation approximately 1.5 µm (according to Werth documentation / calibration records) • Voltage: 230 V AC • Frequency: 50 Hz • Power consumption: max. 10 A

Condition: new, SIMOTICS SD MOTOR TYPE: 1CV3282C Low voltage IEC squirrel cage motor, intrinsically cooled, IP55 Thermal class 155(F) to 130(B) Cast iron housing Basic line Premium Efficiency IE3, 60Hz, P60: IE2 6-pole * Frame size. 280M * 55kW (50Hz) 66kW (60Hz) 3 AC 50Hz 400VD/690VY * 3 AC 60Hz 460VD IM B3 3 PTC thermistors for disconnection (2 terminals) Terminal box top Codogpgymspfx Agzegp

Year of construction: 2024, condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor - 30 m/min Feed speed - 37 KW Mainmotor - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt Cgodpfxsful Uis Agzjp - 2.000 mm discharge conveyor belt

Condition: refurbished (used), This servo controller (servo module) from the Indramat brand is for sale. Model: KDS 1.1-150-300-W1-220 Number:234608 K42/92 The controller has been overhauled and tested. Fully functional! Please contact us if you have any further questions or are interested. Installation can also be organized on request. Cgjdpfxjrr Tbco Agzjp

Condition: used, This servo controller / module from the Indramat brand is for sale. Cgedpfx Aerr Tglsgzsp Model: KDS 1.3-150-300-W1 Number: 253924 K06/96 Good, used condition. Fully functional! Please contact us if you have any further questions or are interested. Installation can also be organized on request.

Year of construction: 1991, condition: excellent (used), functionality: fully functional, 250kg/h Capacity Gas Heated Kohnle Heat Treatment Line Csdpfx Agsxqy Itozsgp Fully functinal Still in operation Line Consisted With : Loading - Gas Heated Hardening Furnace (1991)- Oil Tank - Rare Washing Machine - Loading Unit For Tempering - Electrically Heated Tempering Furnace (Industrial Ofenbau 2007) - Blackning Tank Protection Gas : Nitrogen / Methanol

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Cjdjrq Hmzspfx Agzogp Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: like new (used), Year of construction: 1999, overall weight: 6,000 kg, volume flow: 300 m³/h, input frequency: 50 Hz, rotational speed (max.): 2,950 rpm, 11: Industrial pumps of the KSB brand 1 unused, 3 used KSB centrifugal pump + motor unit LUV h 150-340/2 Product information: Manufacturer: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture: 1968 Origin: Plant Frankenthal (Pfalz), Germany Condition: Used, but in good condition ⚙️ Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚡ Technical data – Motor: Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Cgsdpswq Shbofx Agzep Speed: 2950 rpm Cos φ: 0.87 Motor number: 2-151-134 874/1 📦 Description: This industrial high-performance pump from KSB is ideal for transporting large amounts of liquid. The pump is sold together with the matching motor unit. Manufactured to the solid German engineering standards of its time, known for durability and high performance. 2. Pump info: KSB centrifugal pump + motor unit Brand: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture of the pump: 1968 Origin: Plant Frankenthal (Pfalz), Germany 🔧 Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚙️ Technical data – Motor: Type: LUv 5/2 F9 30-605 Motor No: 2-151-134 874/2 Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 📌 Condition: Used, but in good condition. Stored after disassembly from an industrial plant. Technical data has been verified based on the nameplate.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3 kW (4.08 HP), Coil Cutter SF1503CH 3KW / Laser cutting system with automatic sheet metal feed Further details on request Csdpet Huugefx Agzsgp

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 40,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-75 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrated grizzly feeder, 1070x760 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 150-300 tph Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and the travel track units is highly economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-75 -Production Capacity: 150 – 300 tons per hour -Maximum Feeding: 700 mm -Crusher Type: Jaw Crusher -SIZE: 1070x760 mm -Generator: 300 kva -CSS Setting: 45 – 160 mm -Weight: 55000 tons -Dimensions: 2900x3500x14.500mm – Low investment and operation cost – Zero substructure preparation Cgedpjylt U Rjfx Agzep – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), functionality: fully functional, fuel type: diesel, color: yellow, Year of construction: 1997, operating hours: 7,028 h, Product Description Used Komatsu Wheel Loader Manufactured by KOMATSU Model WA150-3 Hours 7003 hr Operates on Diesel Engine Machine as its condition Please contact VIJAY Cgjdpfx Ajumq Hxjgzop JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Condition: excellent (used), Year of construction: 2000, operating hours: 9,080 h, MANUFACTURER: Ingersoll Rand MODEL: MH37 GD SERIAL NUMBER: 2272812 YEAR: 2000 POWER (kW): 43 PRESSURE (bar): 10 CAPACITY (m3/min): Cjdpfx Ajyipn Ijgzogp

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 7836, input voltage: 380 V, year of last overhaul: 2025, total length: 1,460 mm, total width: 842 mm, total height: 1,900 mm, tank capacity: 250 l, input frequency: 50 Hz, empty load weight: 667 kg, overall weight: 1,017 kg, type of input current: three-phase, power: 9.55 kW (12.98 HP), electrical fuse: 32 A, Used machine cleaned & function tested Advantages: + Robust construction, excellent condition, very quiet operation + Available for immediate delivery + Bowl and spiral made of stainless steel + Flour dust protection with bowl ring and automatic shut-off + Equipped with two timers for two speeds + Automatic changeover/shut-off at/after kneading times + Head lifts automatically + Machine has been final-inspected by our two master bakers + Supplied with operating manual Technical data: - Serial number: 7836 - Flour capacity: max. 100 kg - Dough capacity: max. 160 kg - Bowl volume: 250 liters - Bowl diameter: 842 mm - Motor power: 6.9 kW / 8.9 kW Cjderhg Dcjpfx Agzogp - Electrical rating: 380V - 3Ph - 50Hz - 32A CEE plug - Dimensions: 842 x 1460 x 1503 mm (W x D x H) - Max. height with open hood: 1900 mm - Net weight machine: 667 kg - Net weight bowl trolley: 175 kg

Condition: used, cloth lapper, polishing wheel, grinding wheel -Manufacturer: Flex, grinding-polishing sleeves grain 600 -Order No.: 318.175 -Diameter: Ø 90 x 100 mm -Use: for satin finishing machine Flex LP 1503 VR -Number: 11x polishing sleeves available Csdeuuu I Aopfx Agzjgp -Price: per piece, minimum order 3 pieces -Packaging dimensions: 160/150/H15 mm -Weight: 0.05 kg

Condition: used, Year of construction: 2007, empty load weight: 1,503 kg, Year: 2007. Weight: 1503 kilo. Cgedpfswvgavox Agzep Dimensions: 1,65 x 0.82 meter. Platform is 90cm extenable. Power: elektric. Capacity: 227kg. Choice: € 4.000,-. ex VAT More in stock!!

Condition: new, machine/vehicle number: 9140, Year of construction: 2024, operating hours: 1 h, load capacity: 5,000 kg, lifting height: 4,700 mm, free lift: 1,450 mm, fuel type: diesel, mast type: triplex, construction height: 2,310 mm, Equipment: sideshift, Stellar warranty of 12 months or 1000 operating hours. .: 9140 Device details: Year of manufacture: 2024 Load capacity: 5000 kg Lift height: 4700 mm Read operating hours: 1 h Free lift: 1450 mm Mast type: Triplex Mast height: 2310 mm Length/Width/Height: 3260 / 1503 / 2270 mm Operating weight: 6850 kg Csdotw Attopfx Agzogp ---- Equipment: * Protective roof * 3rd valve * 4th valve ----- Attachments: * Sideshift * Load backrest ---- Further device information: ---- The operating hours are generally read hours. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments and sweepers available for you immediately. Of course, also for rent! We are happy to buy your OLD one. Do you have questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to your call! We speak English Interim sale and errors for this offer are expressly reserved. In dealer business, the equipment is sold as is, not refurbished. All information without guarantee, subject to errors and changes.

Condition: new, sheet length: 2060sheet thickness: 3Standard Accessories:NC control Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs. squaring arm with scale 2 pcs. sheet support arms 1 pcs. sheet support arm (on models 1103, 1303, 1503) Finger protection Cutting line lighting Ballscrew Cut counter Cjdpfxjgick Ss Agzegp Portable foot control with emergency stop button Photocell on the back safety guards

Year of construction: 2024, condition: used, functionality: fully functional, Innovative machinery for on-site and prefabrication processing of cellulose insulation in timber element construction – tailor-made solutions for every requirement profile. ISOBLOW blowing machines simplify and enhance the efficiency of cellulose insulation installation. Only top-grade cellulose fibers, high-performance blowing machines, and user-friendly accessories ensure superior quality and rapid application. Components: ISOBlow Plate 6122101 Blowing Plate For dust-free and efficient insulation of single-sided sheathed elements • Includes 7” touch display with memory function, USB interface, time and weight display • User-friendly control panel • Includes 6 pneumatic injection nozzles with pressure sensors, without line laser and operating button • Optional machine control via wireless remote • Includes contact plate and pause function • Harting connectors and LAN ports as specified Cedpsx Rzn Rjfx Agzjgp • Includes crane lifting eyes • Weight: approx. 500 kg Product Data – ISOblow Titan Twin Turbo: The ISOblow TiTAN TwinTurbo features two turbines with distinct characteristics – a true powerhouse for professional installers! The airlock is 50% larger, enabling increased throughput. Precisely balanced 5.5 kW air power allows air flow rates exceeding 720 m³/h and 450 mbar with 16A fuse protection, unmatched on the market! The ultimate blowing machine for cellulose and wood-fibre insulation. Controlled via radio remote control. - Width: 1010 mm - Length: 1680 mm - Height: 1840 mm - Weight: 570 kg - Capacity: 1503 L - Electrical: 400 V / 50 Hz, 16 A - Turbine: 7.5 kW - Airlock drive: 1.1 kW - Agitator: 1.1 kW - Additional chopping unit: 0.55 kW - Total power: 10.25 kW - Max. air pressure: 450 mbar - Max. air flow: 720 m³/h - ISOCELL radio remote control: controls air and material feed - Hose connection: 3” (76 mm) - Open blow: 1900 kg/h - Dense pack: 1400 kg/h - Roof cavities: < 50 cm deep - Wall cavities: < 40 cm deep Cleaning Station Cleaning station for ISOblow Elements • Capacity: 210 L, 420 m³/h extraction capacity • 230 V / 50 Hz, 16 A • Total output: 3.8 kW; weight: approx. 70 kg • Dimensions (L x W x H): 116 x 77 x 112 cm • Includes 7.5 m, 3” suction hose • Vacuum pool cleaner