Used Return Device for sale (13,041)

Condition: used, Measuring device for speed or frequency -Type: 0516 4750 -Dimensions: 420/320/H90 mm -Weight: 3 kg Bledpfeb Itfdjx Afmjp

Year of construction: 1986, condition: good (used), Rotary device for edge processing, turning station, turning table, rotary station, rotary table, transport system, roller conveyor Bledpfxob Rynyj Afmjp -for edgebanding machine, edge banding machine, edge bander -Turning station: for rotating workpieces -Roller track: Narrow -Roller width: 1300 mm -Roller conveyor length: 2900 mm -with: adjustable impact wall -Roller conveyor: Wide -Roll width: 3400 mm -Roller conveyor length: 1400 mm -Swivel head roller: rubberized -Transport dimensions: 3000/1500/H960 mm 3500/1550/H1850 mm -Weight: 1000 kg

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm Bljdecp Nvyjpfx Afmjp -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg

Condition: good (used), portable oxygen breathing apparatus for tunnel boring -for: Herrenkecht tunnel boring machine Bjdob A Ibzspfx Afmolp -System-No: 009-07-06 -in: 2x aluminum cases -various hoses -Transport weight: 100 kg

Condition: good (used), Pipe heating device, pipe burner, pipeline construction burner Bjdpjb A Ix Sofx Afmelp -Max. diameter: 250 mm -Burner for steel pipeline construction -Propane -Transport crate -Dimensions: 600/1400/H330 mm -Weight: 90 kg

Year of construction: 2008, condition: used, Panel return system for use with a single edgebander The panel is transported towards the operator via a motorized belt and a roller\belt table. Moeller mini control Maximum panel dimensions 2500 x 1450 mm Maximum panel height 60 mm Working speed 8 - 25 m\min Working height from the ground 835 - 960 mm Bljdpfxsrxzb Rj Afmep

Condition: used, 2 units single-stage screw clamping devices with exchangeable tension element thread inserts for M 85 and M100 with hydraulic aggregat Bljdpfothtnwex Afmjp

Condition: good (used), Year of construction: 1997, Residual oxygen measuring device for checking the gas volume in insulating glass. Dimensions: Depth: 270 mm Width: 204 mm Height: 180 mm Bjdpfx Afei Azc Asmjlp Weight: 5.7 kg

Condition: used, Plasma cutting machine CLOOS, type CPS 40/80 Year of manufacture: 1990 Output at 60% duty cycle: 80 Amps Output at 100% duty cycle: 40 Amps Adjustable range: 40 and 80 Amps (2 stages) Blsdpfx Aodzqccofmep Cutting capacity in steel: max. 25 mm Torch cable length: 5.5 meters Power supply: 400 Volts with 32 Amp plug - CLOOS hand torch Dimensions (L x W x H): 700 x 600 x 750 mm Weight: 160 kg Good condition

Condition: good (used), handheld terminal, handheld control device, operating unit, control panel, operating panel, operating unit, operating device, programming device -Manufacturer: Siemens, Simatic S5 operator panel -Type: OP 393 III 6ES5393-OUA 15 Blodpfxedngwks Afmep -Protection class: IP 50 -Number: 2x control unit available -Price: per piece -Dimensions: 148/320/H55 mm -Weight: 0.7 kg/piece

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Bledpfjzinzlsx Afmep Good condition

Condition: used, “functionally tested; item originates from the dismantling of equipment at an automotive supplier” Bjdpjzh A D Ejfx Afmelp Quantity: 5 available Manufacturer: Stahl Prüftechnik Type: FR-110.01A Function: Testing device for functional and process monitoring in industrial applications Power supply: 230 V AC Display: LED / Digital display Housing: Metal Application: Quality assurance, leak testing, process control

Condition: good (used), functionality: fully functional, The hot runner system DPK 15 from Günther is for sale. The system has been checked for functionality by the manufacturer. The following inspections were carried out: Blsdpfx Aozl R R Uofmjp Visual inspection, inside and outside Update from V1.56 to V1.6.7 Temperature calibration Testing according to DIN VDE 0701 Both cables, STL/0/15 and TVK/3/15, are in good technical condition and correctly wired.

Condition: used, power: 1.68 kW (2.28 HP), Industrial vacuum cleaner RINGLER RI 321-D 1.1, workshop vacuum cleaner for chips and oil 1.68 kW 2850 rpm 380 V Shipping costs upon request From stock (may have storage marks), condition as shown in the pictures Please refer to the pictures for further technical information. Scope of delivery as shown in the picture. The invoice will be enclosed with the shipment. Hsck U Niez Hxxmsg Aou Payment method Bjdez Hyn Njpfx Afmslp Bank transfer Self-collection You will receive information about bank details, payment terms, etc. by email. Provider

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Bljdpfxoxxmf Ie Afmsp Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Bljdpfx Afexqxt Iomjp Shipping is possible upon arrangement. #8312-1

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, The separating device from trio-technik is for sale. This unit is designed for the separation of objects with various geometries. Length: 950 mm Bjdpfjx Dm Rzsx Afmjlp Width: 700 mm Height adjustable: 700-1380 mm Possible gap width: 50 mm Tilt angle: max 20 degrees Drive/three-phase current: 400V 50Hz Power consumption: 0.09 kW/h Speed adjustable.

Condition: good (used), Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table -Welding turning device: turning length 3130 mm -Turntable: Ø 800 mm -Peak height: 870 mm -Speed: electrically continuously variable 0-3 rpm -Drive: Servo motor 1/1.6 kW with cooling, see photo of nameplate -Direction of rotation: Right/left rotation -Axles: 1 piece -tiltable: No -Height adjustment: No -Transport dimensions: 3890/900/H1420 mm -Weight: 880 kg Bedpfx Asxm Sqrjfmolp

Year of construction: 2025, condition: new, The universal assembly and adjustment device (HSK 63) for securely clamping all types of aggregates outside the machine—regardless of the design and machine interface. Bljdpfxjxmb Nwe Afmjp In addition to maintenance work on the aggregate, shank tools or complete tool sets can be reliably mounted and set up, whether in the aggregate itself, in tool holders, or on milling arbors—quickly, precisely, and safely. Thanks to compatibility with all standard machine interfaces, the device can be used flexibly, independent of the position and number of locking or support pins on the aggregate. Even tool holders with nesting turbines fit without issue. Whether it’s angle adjustments on the swivel unit, adjusting tool positions on the tracing aggregate, or tool changes on a multi-spindle drilling head—our assembly and adjustment device is THE essential tool for every workshop with a CNC machine. - Simple handling of aggregates of various designs - Suitable for all common machine interfaces - Safe clamping and alignment of tools - Universal use in assembly, service, and production - Robust construction for permanent use Availability: immediately from stock Warehouse location: Flörsheim

Condition: used, Year of construction: 1970, power capacity 0 kW Bedpfxou Sbfds Afmolp tool adaptor 0 total power requirement 0 kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), container turning device, boiler turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning device -Container turning device: welding turning device -Load capacity: 5000 kg -Drive motor: SEW Eurodrive 0.37 kW -Unrolling speed: 100 to 600 mm/min right/left rotation -Roller spacing: 270 - 960 mm, rollers Ø 230 x 159 mm Blodpfxsvt Rcde Afmsp -Transport dimensions: 1200/740/H745 mm / 870/430/H745 mm -Weight: 378 kg / 275 kg

Condition: used, Quantity: More than 10 available Used safety module / fieldbus module for industrial automation and PROFINET applications from Murr Elektronik. Manufacturer: Murr Elektronik Blsdpfezi Dx Hex Afmop Model: MVK-MPNIO F DI16/8 7/8" IRT Article number: 5556 Device type: Safety device / safety module Communication: PROFINET IO IRT-capable: Yes Digital inputs: 16 safe inputs / 8 channels Connection type: 7/8" connector Application area: Industrial automation technology Mounting type: Field mounting

Condition: new, centre height // mm Bedpfszcgfqex Afmelp total power requirement / kW weight of the machine ca. / t required space / m Parts machine for lids FP1 / FP2 Condition: NEW

Condition: reconditioned (used), Gostol Gopan SMH 100 spiral mixer with DP-6 ZA SMH bowl lift. Two mixing speeds: pre-mixing with counter-clockwise rotating bowl and kneading. Programmable mixing times. Simple operation via an electronic control panel for entering the kneading and mixing time. Dimensions (L × W × H): 1720 × 895 × 1380 mm Gross weight of the machine: 1110 kg Blsdjz Ia Niopfx Afmep Gross weight of the bowl with carriage: 250 kg Used and refurbished. Manufactured in Slovenia. Price upon request.

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Bjdpfoyrg H Hjx Afmelp