Used Renner Screw Compressor for sale (69)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. Hedpfezu Aibox Ac Tjt The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, machine/vehicle number: RS18_5_ReAN19440656, pressure (max.): 15 bar, Showcase screw compressor RENNER RS 18.5 - 15 bar Year of manufacture: 2018 Operating hours: 2 operating hours Technical specifications Type: RS 18.5 Operating pressure: 15 bar(ue) Delivery volume at 15 bar, according to ISO 1217 Appendix C: 1.89 m³/min Protection class/insulation class of drive motor: IP 55/ISO F Rated power of drive motor: 18.5 kW Operating voltage/frequency: 400/50 V/Hz Sound pressure level: 71 dB(A) Length: 1287 mm Width: 799 mm Height: 1296 mm Weight: 532 kg Compressed air connection: G 1 1/4" Visit our Retail store. We always have a large selection of new and used compressors in stock! Hjdpfxsv Rbvce Ac Tst

Condition: used, Year of construction: 2016, operating hours: 14,279 h, machine/vehicle number: 644063, delivery quantity 4.61 m³/min at 10 bar delivery quantity 5.23 m³/min at 8 bar operating pressure 10 bar nominal power 30.0 KW operating hours 14,279 load hours 11,148 compressed air connection G1 1/4" sound level 69 dB(A) space requirements length - 1,400 x width - 830 x height - 1,640 mm weight approx. 850 kg Hsdpfxsn Stanj Ac Tet

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Hedpfx Aozmub Toc Tot

Condition: good (used), Year of construction: 2023, machine/vehicle number: 231293, Offer 25452 Technical data: - Operating hours: 754 h - Working pressure: up to 13 bar - Delivery rate: 860 l/min - Drive: 400 V / 7.5 kW - Galvanised air receiver: 500 l - Integrated dryer RENNER Type RKT + 0065 - Automatic condensate drain - Required space: approx. W 650 x H 1650 x D 1400 mm Hedpfxsx I Izro Ac Tot - Weight: approx. 350 kg

Condition: like new (used), Year of construction: 2018, operating hours: 145 h, machine/vehicle number: MA0003_SN807103, Demonstration Machine available immediately: RENNER RS-18,5 oil-injected screw compressor. Made in Germany Hsdpfxedulwnj Ac Tst The compressor is in very good condition with 45 operating hour. Pressure: 10 bar Rated power: 18,5 kW Delivery quantity: 2620 liters / min Sound level: 71 dB (A) Compressed air output: 1 1/4 " Dimensions Length x Width x Height: 1287 x 799 x 1296 mm Weight: 532 kg Operating hour: 145 Bh

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0169, Exhibit in stock immediately available (Plug and Play): RENNER RS-PRO 7.5 - 10 bar oil-injected screw compressor The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 7.5 kW Delivery quantity: 1.09 m³ / min Sound level: 63 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 540 x 553 x 1014 mm Hsdpfx Aeity Ecsc Tjt Weight: 198 kg Operating hours: 0,5 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Year of construction: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 7.50 kW Hsdpfx Aov Al Nqsc Tot Delivery quantity: 890 l/min Sound level: 69 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 835 x 595 x 935 mm Weight: 195 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, type plate available, Oil-Free Screw Compressor RENNER RSF 250 D – 250 kW – 45,000 l/min – Year 2015 Technical Specifications • Manufacturer: RENNER Kompressoren • Model: RSF 250 D • Year of manufacture: 2015 • Serial number: 545073 • Motor power: 250 kW • Air flow rate: 45,000 l/min (45 m³/min) • Working pressure: 7.5 bar • Maximum permissible pressure: 13 bar • Soundproofed enclosure Hedszm Nhnepfx Ac Tet • Electronic control with digital display • Fully automatic operation • Industrial design for continuous service

Condition: used, Year of construction: 1997, feed pressure 10 bar Hsdpfxoid S Trs Ac Tet liter capacity 1500 l Number of working hours 5111 h total power requirement 11 kW weight of the machine ca. 250 kg

Condition: used, Year of construction: 2024, operating hours: 3,900 h, functionality: fully functional, power: 11 kW (14.96 HP), ISC Recycle offers you a high-quality compressor in excellent condition, ready for use. Model: RENNER RSF-PRO-2-11 Condition: Used (Very recent) Year of manufacture: 2024 Power: 11 kW Maximum operating pressure: 10 bar Capacity/Flow rate: 2,040 ltr/min at 6.0 bar Hjdpfszgr Nzex Ac Tot Power supply: 400V / 50Hz / 3-phase Do not hesitate to contact us for more information!

Condition: excellent (used), Year of construction: 2014, operating hours: 52 h, functionality: fully functional, power: 85 kW (115.57 HP), fuel type: electric, operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, 5 × RENNER screw compressors – 2 × RSF 85 + 3 × RSF 45 – Frequency-controlled – Water cooling – Heat recovery – Modbus A total of 5 compressors: - RENNER RSF 85 (85 kW) – 52 operating hours - RENNER RSF 85 (85 kW) – 123 operating hours - RENNER RSF 45 (45 kW) – 22 operating hours - RENNER RSF 45 (45 kW) – 138 operating hours - RENNER RSF 45 (45 kW) – 53 operating hours For sale is a package of RENNER RSF screw compressors in an industrial design. All machines come from an industrial test bench system in our own facility and were procured for a development project. Due to a project change, the test benches never went into productive operation. The compressors were then dismantled and stored. This is a specially configured industrial design with special features and practically no productive runtime: - Frequency control - RENNERtronic Plus control system - Modbus interface – integration into building automation systems possible Hodpfszi Ukmex Ac Tot - allowing external setpoint input (pressure/speed) - Water cooling - Design for high cooling water temperatures (60/80 °C) – but does not necessarily have to be used - High outlet temperature for efficient heat recovery (ideal for heating support) Technical data RSF 85 85 kW Frequency-controlled Operating pressure 5–10 bar Flow rate up to approx. 14.5 m³/min Water cooling RENNERtronic Plus Modbus RSF 45 45 kW Frequency-controlled Operating pressure 5–10 bar Flow rate up to approx. 7.25 m³/min Water cooling RENNERtronic Plus Modbus The compressors were specifically designed for the utilization of waste heat. The water cooling allows high cooling water temperatures to be achieved, making the systems ideally suited for heat recovery and feeding into heating systems. The operating pressure can be increased to up to 15 bar by a modification of the pulleys and V-belts as provided by RENNER. A corresponding offer from RENNER is available, but the modification was never needed. Inspection: The machines are dismantled and stored. An inspection is possible at any time by appointment. We will gladly send further photos, nameplates and technical documents upon request. Price: Negotiable / Offers welcome.

Condition: defective spare-parts repository (used), Year of construction: 2017, operating hours: 26,000 h, functionality: not functional, overall weight: 609 kg, total length: 1,287 mm, total width: 799 mm, total height: 1,296 mm, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 262,800 m³/h, operating pressure: 10 bar, noise level: 72 dB, type of cooling: air, Equipment: documentation/manual, The frequency inverter is defective, but otherwise the unit was fully functional until the end. Hodpfszinwajx Ac Tot Regularly maintained. Available for sale; offers are welcome.

Condition: good (used), Year of construction: 1999, Screw compressor, Renner, screw compressor RS-PRO 7.5, soundproofed, incl. refrigerant dryer ECOTROC KTD-B100 – used: Price ex works: €2,950.00 (net)! Manufacturer: Renner Type: RS 7.5-10 Hedpozbydqsfx Ac Tjt Year of manufacture: 1999 Serial No.: 1992 Article number: 07500001 Rated power: Motor speed: Max. operating pressure: 10 bar Power consumption: 7.5 kW Delivery rate: 950 l/min Operating hours: approx. 4,342 h (as of 21.04.2026) Weight: 198 kg Incl.: Manufacturer: KSI FILTERTECHNIK Type: ECOTROC KTD-B100 Serial No: 31-11-MA11834 Max. pressure: 16 bar Nom. capacity: 97 m³/h Max. amperage: 2.1 amps Fuse amperage: 4.0 amps Refrigerant: R134a Refrigerant quantity: 0.75 kg Voltage: 230V / 1 / 50 Hz Power: 0.35 kW Condition: good Available: from approximately August 2026 Location: Leipzig

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Hedpfx Acszb Idre Tot Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: excellent (used), Year of construction: 2015, RENNER RSF2-45 screw compressor, equipped with a frequency converter and heat exchanger, recently serviced. Technical data: capacity: 6.83 m3/min (6830/min); engine power: 55 kW; pressure: 10 bar; Year: 2015 operating hours: 9691 h net price: 19200 Hjdpjzgdf Uefx Ac Tet gross price: 23616 Compressor in fully working condition. Service support provided.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, RENNER RS 37 screw compressor, refurbished and fully serviced. Technical specifications: Capacity: 5.24 m3/min (5240/min); Engine power: 37 kW; Pressure: 10 bar; Year: 2015 Operating hours: 60214 h Net price: 12200 Gross price: 15006 Hodpfozcna Nex Ac Tjt The compressor is in perfect working order. We provide service and support.

Condition: used, Year of construction: 2017, operating hours: 13,305 h, functionality: fully functional, machine/vehicle number: 739011, power: 7.5 kW (10.20 HP), operating pressure: 10 bar, Equipment: documentation/manual, type plate available, Screw compressor Renner RS-Pro 7.5 - 1090 l/min - Power: 7.5 kW - Year of manufacture: 2017 - Operating hours: 13,305 h Hedoyn I Rropfx Ac Tet

Condition: excellent (used), Year of construction: 2011, volume flow: 2.62 m³/h, operating pressure: 10 bar, pressure: 10 bar, RENNER RSKF 18.5 SCREW COMPRESSOR Variable speed (inverter-controlled) 18.5 kW motor Capacity: 2.62 m3/min Pressure: 10 BAR Year of manufacture: 2011 Operating hours: 11,230 hours MACHINE IS IN FULLY WORKING CONDITION. Hodjy Ur Agepfx Ac Tet

Condition: used, Year of construction: 2014, MANUFACTURER: RENNER Hsdpfx Aeyitbloc Tot MODEL: RSF37 SERIAL NUMBER: 440052 YEAR: 2014 POWER (kW): 37 CAPACITY (m3/min): 5.2 PRESSURE (bar): 10

Condition: excellent (used), Year of construction: 2009, RENNER 18,5Kw VALVE COMPRESSOR! Screw compressor RENNER RSF 18.5 machine with inverter and heat exchanger after service Technical data: capacity: 2.62 m3/min (2620/min); motor power; 18.5 KW; Hjdpfx Aotqc D Eec Tet pressure: 10 bar; mileage;1972h Year 2009 net price 12200 gross price 15006 Compressor fully operational, we provide service.

Condition: used, Year of construction: 2002, MANUFACTURER: RENNER MODEL: RS55 SERIAL NO.: 5333 YEAR: 2002 POWER (kW): 55 OUTPUT (m3/min): 7.96 PRESSURE (bar): 7.5 Hjdoyiy Ncopfx Ac Tet

Condition: excellent (used), Year of construction: 2013, volume flow: 1.96 m³/h, operating pressure: 10 bar, pressure: 10 bar, RENNER RS 15 SCREW COMPRESSOR Hjdpfx Acjt Hdi He Tot Variable speed ( Inverter) 15 kw motor Capacity 1,96 m3/min Pressure 10 BAR, Year of production 2013 Screw stage 2017r Mileage 77 Mtg Compressor fully operational.

Condition: excellent (used), Year of construction: 2009, volume flow: 1.45 m³/h, operating pressure: 10 bar, pressure: 10 bar, RENNER RSF 11 SCREW COMPRESSOR Variable speed (inverter) 11 kW motor Hsdpeyuiqyjfx Ac Tst Capacity 1.45 m³/min Pressure 10 bar Year of manufacture 2009

Condition: new, Year of construction: 2017, operating hours: 4 h, functionality: fully functional, machine/vehicle number: 706097, overall weight: 158 kg, total length: 400 mm, total width: 800 mm, total height: 800 mm, power: 3.7 kW (5.03 HP), fuel type: electric, volume flow: 24 m³/h, operating pressure: 8 bar, pressure (min.): 4 bar, pressure (max.): 8 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 60 °C, type of cooling: air, Equipment: documentation/manual, type plate available, NEW AND UNUSED OIL-FREE AIR COMPRESSOR, IN FULL WORKING ORDER. Hodpfx Asy Tv I Roc Tjt