Used Push Lawn Mower for sale (1,356)

Condition: used, Year of construction: 2015, operating hours: 2,766 h, power: 16 kW (21.75 HP), Ride-on Lawn Mower KUBOTA G23-2 HD with High Dump 16.1 kW / 22 HP Includes mid-mount mower deck RCK 48 with 1.22 m cutting width, 640-liter grass collection box with hydraulic high dump ---- * Engine: 898 cm³ 3-cylinder KUBOTA diesel engine, emission stage V, engine output (SAE J1995) 16.1 kW (21.9 HP) * Transmission: HST transmission, load-sensing control, max. speed 19 km/h * Mechanical differential lock * Cruise control * Single pedal operation * PTO shaft drive * Oil-cooled disc brakes * Turf tires front 16 x 7.5-8, rear 24 x 12.00-12 Comfort features: Djdpfxswcagcs Aqvskn * Fully hydraulic power steering, tilt-adjustable steering wheel * Coolant temperature gauge * Hour meter * Tachometer * Easy Checker * Safety system for mower and drive operation * "Kross-Control" single-lever hydraulic control system for all hydraulic functions * Integrated front tie-down points Mid-mount mower deck: * Rotary mower with 2 blades, shaft drive, electrically actuated magnetic clutch, blade drive via spur gear, hydraulic mower lift, central cutting height adjustment 25-102 mm (13-position rotary knob), blade length 673 mm (1.22 m), ground clearance 150 mm Grass collection box: * Hydraulic emptying, discharge height (HD) 1.97 m, integrated fill level warning indicator, includes front weight bracket and additional front weights * Working width: 1.22 m ----Well-maintained used machine from first owner, good condition - ready for immediate use! Errors and changes excepted!

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 589-0263, Make Illig Model VHW 60/2 Year 2001 Dkedpfxouzi I Ee Aqven Condition Good Number of Heating Rolls Two Max material width 610 mm Max material thickness 1.8 mm Max temperature of heating rolls 140 °C Material wrap around 563 Grad Total connected load 36.0 kW Dimensions 2300 x 1400 x 2400mm L x W x H (300kg) All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Dodpfovbcbuex Aqvokn Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Dksdpfx Asvtcvieqvon Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: good (used), Loma IQ Twin head metal detector Dkedpfxsulzy Ho Aqvsn Stainless metal detector, twin head, ferrous in foil, belt dimensions 2000mm x 280mm, aperture 340mm x 120mm, push arm reject, 3Ph

Condition: good (used), Sartorius SYNUS10 Metal detector checkweigher Dkjdpfx Aqoxukulsven Stainless, overall belt dimensions 1700mm x 150mm, with Sartorius MDP Plus metal detector aperture 200mm W x 330mm H, checkweigher platform 260mm x 150mm, weight rang 100g to 2000g, two push arm rejects, previously used for jars of olives, 1Ph Password 1827

Year of construction: 2025, condition: new, functionality: fully functional, JayCraft Potato Sample Washer Precision Cleaning for Reliable Sample Analysis Overview The JayCraft Potato Sample Washer has been specifically engineered to deliver thorough cleaning of small potato batches, making it an essential tool for agricultural laboratories, seed producers, and crop quality inspectors. Designed with efficiency and durability in mind, this washer provides a consistent, high-quality clean essential for accurate grading, disease inspection, and presentation analysis. Key Benefits Optimised Sample Preparation Ensure your potato samples are cleaned to a consistent standard for grading, visual inspection, or laboratory testing. Time-Saving Operation Process multiple sample loads quickly, with a wash cycle that takes just minutes—ideal for high-throughput environments. Rugged, Low-Maintenance Design Constructed from food-grade stainless steel, the washer is built to withstand the demands of daily agricultural use with minimal upkeep. Simple, Intuitive Controls Designed for ease of use, operators require minimal training. Push-button or timer-based operation allows for repeatable, consistent washing results. Dsdpfx Aewq A Sweqvjkn Features High-Efficiency Washing Drum Gently agitates the sample to remove soil, debris, and loose skins without damaging the crop. Robust Stainless Steel Frame Built to last in demanding environments, with corrosion-resistant materials for long-term use. Compact Footprint Fits easily into labs, grading stations, or packing sheds—ideal where space is at a premium. Easy Drainage System Fitted with a bottom drain valve or outlet for quick and hygienic water disposal. Optional Extras: Variable speed control Timer operation Custom drum sizes (upon request) Typical Applications Agricultural Laboratories – Sample preparation for disease testing, dry matter analysis, or internal defect inspection. Seed Potato Certification – Cleaning samples for visual and regulatory inspection. Crop Trials & Breeding Programs – Fast, repeatable washing for batch comparisons. Grading Lines & QC Stations – Consistent finish evaluation for visual and mechanical grading systems. Technical Specifications Feature Specification Power Supply 3 phase Construction Stainless steel (AISI 304) Capacity Approx. 25kg per batch Control Options Manual or timer-based operation Drain Outlet 3” stainless valve or hose tail Why Choose JayCraft? With over 30 years of experience in post-harvest processing equipment, JayCraft is a trusted name in the food processing industry. We combine innovation with practicality to deliver machines that improve productivity, reliability, and results. Each JayCraft Sample Washer is manufactured in the UK with precision engineering and quality materials. Whether you're in research, production, or quality control, our equipment is designed to meet your needs. MADE TO ORDER

Condition: excellent (used), Year of construction: 2021, TMUA VR30 Belt Grinder, variable speed. Year: 2021. The WR can be used for deburring, edge rounding, brushing, superfishing, or manual polishing of parts made of any material and of any shape. The motor and unit assembly can optionally be mounted on a reinforced sheet metal base. The working units are adjustable around the motor shaft, and the housings are equipped with a Ø 120mm suction nozzle. Motor specifications: WR30: 2.2 Kw – 3000 rpm – 220/380v three-phase power supply. Control box: Variable speed drive in an enclosure with a potentiometer, emergency stop, and push button. Dedpsy U N A Rsfx Aqvskn

Condition: used, Year of construction: 2000, Overview This Bohrer R40 crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built in stainless steel and is suitable for integration into industrial crate handling systems. The system includes a stainless steel washing housing, integrated fluid collection basin, conveyor sections for crate transport, access platforms and safety walkways. The machine was observed in a wet production environment with crate conveyor tracks and facility piping connected to the washing area. Operation is carried out via an integrated control panel with push-buttons and indicator lights. Technical Data Manufacturer: Bohrer Maschinenbau Model / Type: R40 Machine Type: Crate washing machine Year of Manufacture: 2000 Origin: Regenstauf, Germany Application: Washing / cleaning of beverage crates Construction: Stainless steel housing and machine frame Conveyor System: Integrated crate transport / conveyor sections Washing Area: Enclosed washing chamber with splash protection Fluid Handling: Stainless steel collection basin and drainage system Access: Stainless steel stairs and maintenance walkway with grating Control System: Integrated operator panel with push-buttons and indicator lights Electrical Supply: 400 V Frequency: 50 Hz Connected Load: 26 kVA Dkjdpfxozb A E Ds Aqven

Condition: used, Year of construction: 2003, Overview This Krones Blitzpac case packer, manufactured in 2003, is designed for the automatic packing of PET bottles into crates. The machine is configured for handling of 1.0 l PET bottles, packed into 12-bottle crates. The machine has a stated design capacity of approx. 2,700 crates per hour. Product handling is carried out by a mechanical / pneumatic matrix gripper system, which lifts multiple rows of bottles and places them into crates. The machine is fully enclosed with transparent safety guarding. Operation is controlled via an integrated MTS 10 HMI panel, with physical push-buttons and emergency stop. Technical Data Manufacturer: Krones AG Machine Type: Blitzpac case packer / bottle packer Machine Description: Blitzpac Einpacker 23/0673/006 Year of Manufacture: 2003 Application: Packing of PET bottles into crates Pack Format: 12-bottle crate Capacity: approx. 2,700 crates/hour Control / HMI: MTS 10 operator panel Bottle Handling: Mechanical / 7pcs. pneumatic matrix gripper for multi-row bottle handling Condition: Used, observed in industrial production environment Dkodpfx Aozb Aghoqvjn

Condition: used, Year of construction: 2000, Overview This Krones K6W-25-S-E crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built as a stainless steel industrial crate washer and is suitable for integration into automated crate transport and washing systems. The system includes a stainless steel machine housing, integrated conveyor sections, viewing / inspection windows, electrical control cabinet and operator panel with push-buttons, indicator lights and main switch. The machine is CE-marked and designed for 230 / 400 V AC, 50 Hz operation. Technical Data Manufacturer: Krones / Krones Zierk GmbH Model / Type: K6W-25-S-E Machine Type: Crate washing machine Year of Manufacture: 2000 Application: Washing / cleaning of beverage crates Construction: Stainless steel machine housing and frame Conveyor System: Integrated slat-chain conveyor and crate transport sections Drive System: Electric drive motor with gearbox Inspection Access: Viewing window with safety latch hooks Control System: Integrated electrical control cabinet Operator Panel: Push-buttons, indicator lights and red rotary main switch Electrical Supply: 230 / 400 V Current Type: AC Frequency: 50 Hz Nominal Current: 24 A Dedpezb Ad Tsfx Aqvjkn

Year of construction: 1998, condition: used, Longitudinal cutting saw for cutting aluminum profiles with feed pusher in very good condition Dkedpfswx I Hvox Aqvon Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Push length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm Dsdpfx Aqjqlck Novskn 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm Dsdoqlckpjpfx Aqvekn - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Djdpfjdqzbrsx Aqvekn Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Dksdpfer Ig H Tox Aqven Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2024, Technical data: Djdpfx Ajb Eln Dsqvjkn Slat carcass press from our showroom; Working range: width from 150 - 2.550mm, height from 150 - 1.400mm; depth from 150 - 700mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 dN(kg) of the lateral pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 dN(kg) of the upper pressing bar Simple operation via 6 separate push buttons, Freely adjustable pressing time preselection with automatic opening, Charging height 300 mm Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Dodpfx Aqoy Egz Sevokn Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Dodpfx Aey Ehrxeqvjkn Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1991, Manufacturer: Ott Model: JU 2511/70 Year of manufacture: 1991 Technical condition: very good – inspection possible Type: Veneer press Drive: electrohydraulic Power: approx. 13.6 kW Heated plates: aluminium, dimensions 2550 x 1100 mm (L x W) Heating: electric Hydraulic cylinders: 4, each with a diameter of 80 mm Dodpfx Aqsyutxnsvjkn Total pressing force: 70 tons Specific pressing force: 2.5 – 3.5 kg/cm² Opening stroke: 400 mm Control: push-button control for open – close – stop Pressure monitoring: automatic adjustment Adjustable limit switch: for specific opening stroke Safety features: safety pull cord Transport dimensions: approx. 2900 x 1400 x 2000 mm (L x W x H) Weight: approx. 3000 kg Location: ex works customer - will be delivered to stock 54634 Bitburg -

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the Dkjdpjqlclbjfx Aqvon the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Dedpegf Sw Nefx Aqvekn Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: good (used), Technical data: Manufacturer: BITO Pro Version: left 24310 Included in delivery: 01x holder for push-through protection, used material color: sendzimir galvanized total width: approx. 93 mm total depth: approx. 93 mm opening dimension f. profiles: approx. 51 x 46 mm (HxW) material thickness: approx. 3,00 mm number of hooks: 2 hooks Grid spacing: approx. 50 mm Djdei El S Njpfx Aqvekn Weight/pc.: 0.189 kg

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 2,550 mm Number of bays per row of shelves: 01 pcs. 2,400 mm each Number of levels plus floor level: 02 pcs. The scope of delivery includes: 02x pallet rack uprights, new Material color: sendzimir galvanized Material color base plates: RAL 5010 gentian blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal struts, foot plates Dksdpsktbnmsfx Aqvon The uprights are unassembled ( bolted framework ) 2,350 mm high 800 mm deep Remark: The shelf stands are supplied unassembled. We are happy to pre-assemble the shelf uprights for a an additional charge of € 17.50 plus 19% VAT. 04x Pallet rack beams, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE Agraffe: 5 HK (hooks) Clear width: 2,400 mm Max. load per truss pair 1,600 kg, with evenly distributed load 08x locking pins, new Version: completely galvanized To secure the longitudinal beams against unintentional lifting out 08x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete Push-through installation: M 12-13/95 04x shims, new Version: completely galvanized for leveling the shelf uprights that are are set up on an uneven floor 01x Load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Included in delivery are: 01x Depth web frame, new with push-through protection material color: sendzimir galvanized for upright depth: 1.100 mm total depth: 1.200 mm total width: 850 mm support angle: 1.200 x 100 x 50 mm cross connector: 850 x 35 x 35 mm Dkodobh Ia Tspfx Aqven Material thickness: approx. 3 mm Weight/piece: approx. 12.00 kg These are goods to order with at least 10 working days delivery time! Remark: The depth web frame and the integrated integrated push-through protection prevent the transverse and lengthwise storage of containers, pallet cages and pallets. and pallets from slipping off the storage unit. They also serve to stabilize the pallet storage in the rack. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.