Used Profile Projector Pj 300 for sale (30,480)

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 8000 [rpm] - Max. turning diameter : 60 x 60 [mm] UPPER RIGHT TURRET Podpewdad Defx Ag Dord - X/Z stroke : 300 x 285 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 10 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2422 x 1957 [mm] - Machine height : 2430 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : DMG MORI COMPACT LINE (Fanuc 0i-TF) - Electronic handwheel - Coolant tank - Parts catcher - Workpiece loading robot - Electric transformer

Condition: used, Year of construction: 2005, Technical details: screw size: 70 mm injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! * Prsdpfxowftr Do Ag Ded

Condition: refurbished (used), Year of construction: 2008, Vehicle description Cesab Blitz 300 Year of construction 2008 Battery 05 / 2022 ( NEW ) was not yet in use. Overall height 2550 mm Lifting height 5600 mm Triplex mast. Full free lift 1700 mm Load capacity 3000 kg Fork positioner and sideshift 1800 mm Operating hours 11129.h New tires / New paint / New battery With charger 80 Volt ( NEW ) UVV new on request. Device ready for immediate use. Predpfxsrubc Uo Ag Dsd

Condition: excellent (used), TECHNICAL DATA This furnace system is for recrystallization, normalization, soft annealing, stress relief, annealing and conditionally suitable for soldering. belt width: 1000 mm working height: 300 mm (over belt) heated length: 4250 mm electrical heating power: 300 kW heating zones: 4 heating temperature: 900 – 1120°C belt speed: 6 – 60 m/h (continuously adjustable) nominal connected load: 310 kW natural gas consumption: 50 Nm3/h natural gas pressure: 30 – 50 mbar nitrogen consumption: 70 Nm3/h – on purging nitrogen pressure: 100 mbar emergency cooling water pressure: 4-6 bar furnace length: 25298 mm furnace width: 2200 mm Pjdpfsgi Dv Dsx Ag Derd furnace height: 2800 mm exhaust gas quantity: 1200 m3 / h

Condition: used, Year of construction: 1979, Intake diameter: 300 mm Pjdewm Nrvspfx Ag Djrd Discharge diameter: 300 mm Flow rate: 5400 m³/h Motor power: 2.5 kW Weight: 100 kg

Year of construction: 1991, condition: ready for operation (used), Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible. Podpju D Aagjfx Ag Djrd

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 222866, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,120 cm³, overall weight: 7,100 kg, TECHNICAL DETAILS Clamping force: 3,000 kN Screw diameter: 70 mm Shot volume: 1,120 cm³ MACHINE DETAILS Weight: 7,100 kg Predpfx Asw N In Hjg Dod Operating hours: 17,000 hours EQUIPMENT Barrier screw with homogenizing unit and mixing head Cleanroom suitability

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 6200 kg Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Prodpfxjwttw No Ag Dod Tools Max weight 6 kg Max tool diameter 100 mm Additional Equipment Automatic central lubrication Volautomatic set-up table Safety tread mats IMAWOP 6.0 Suction traverse at delivery for automatic discharge transport Driven conveyor belt for discharge transport This IMA BIMA CUT 120/300 was manufactured in 2008. It features a 4-axis milling spindle with a power of 7.5 KW and speeds ranging from 8000 to 24000 rpm, complemented by an 18-fold automatic tool changer. The machine includes a vacuum pump of 100 m³/h and a driven conveyor belt for efficient discharge transport. Consider the opportunity to buy this IMA BIMA CUT 120/300 CNC processing center. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: used, Year of construction: 1979, functionality: fully functional, Grinding wheel diameter: 600 mm Center width: 300 mm Center height: 180 mm Headstock Predpfxsrvybtj Ag Dod Counter holder with pressure cylinder

Condition: good (used), Size: max 480 x 325 mm Size untrimmed with lap: max 480 x 325 mm, min 90 x 115 mm Size untrimmed without lap: max 440 x 300 mm, min 158 x 115 mm Size trimmed with lap: max 470 x 320 mm, min 148 x 105 mm Size trimmed without lap: max 430 x 295 mm, min 148 x 105 mm Speed max: 14.000 c/h Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder • 7 station gathering track & chain • 4 double base • 6 feeders 345 • 1 cover folder feeder 1529 stitching unit • stitching unit 300 • wire unwind device • thickness control/ plus-minus • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 251 knives • 2 sets of knives delivery • belt delivery standard accessories • 1 set of operator manuals • 1set of electrical diagrams • 1 spare part catalogue • 1 set of tools further information Podpfx Ask D Ah Usg Derd • location: D- Braunschweig • next airport: Germany-Hannover • condition: very good

Year of construction: 2025, condition: new, Size reduction of large-volume blow molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling and energy efficiency. Podop Sr Anjpfx Ag Dsrd These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths from 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, the rotor and stator knives are adjustable outside the machine, reducing downtime for maintenance. The highly tangential, curved rear wall of the cutting chamber, combined with the aggressive open rotor design, ensures reliable material pickup and minimizes the risk of jams. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling e.g. voluminous parts such as bottles, canisters, crates. Due to the low feeding height, the machines can be easily fed with material by hand or by a small conveyor belt. The low noise emission and the small footprint make the granulator a perfect solution for inline size reduction Optional rear panel with higher stator knife M version: The feed method with a higher positioned stator knife is better suited for thicker walled and more compact parts, such as injection molded parts, profiles, plates, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high quality regrind is obtained regardless of the material type or shape, such as injection molded parts, profiles, plates, etc. Control system and control panel: The integrated control system and control panel not only comply with all applicable safety regulations, but can also be customized to meet specific requirements. In addition, peripheral equipment such as infeed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available that reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 er cyclone Rotor diameter (mm) 250 Rotor width (mm) 300 Drive (kW) 7.5 Number of rotor blades 3 x 1 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 950 Feed opening (mm) 380 x 300 Feed opening option of M version (mm) 295 x 300

Condition: used, empty load weight: 650 kg, maximum load weight: 2,350 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 08/1991, loading space length: 2,970 mm, loading space width: 1,500 mm, loading space height: 400 mm, suspension: steel, tire size: 185R14C, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, tandem, leaf suspension, flap, front support Body: Tandem low loader trailer with aluminum drop sides and aluminum access ramp Loading height approx. 600mm! Ramp length approx. 1500mm! AL-KO axles! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Podpfxoi Rlb Es Ag Dord

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: SB11/300/40, For sale is a Weiss climate test chamber. Designation: SB11/300/40 Prjdpjw Dygfefx Ag Dod Cooling-heating operation: -40...+180 °C Climate operation: +10...+95 °C Humidity range: 10...98 % RH Temperature stability The temporal temperature stability in climate mode is ±0.1...±0.5 K The temporal temperature stability in cooling-heating mode (without climate) is ±0.2...±0.5 K Humidity stability The temporal humidity stability across the entire operating range is ±2...±3 %RH Condenser: air-cooled Rate of temperature change: Cooling: approx. 3.1 K/min Heating: approx. 3 K/min Test chamber volume: approx. 301 L Internal dimensions: Height 680 mm, Width 540 mm, Depth 820 mm External dimensions: Height 1700 mm, Width 800 mm, Depth 1780 mm Weight: approx. 420 kg / Power supply: 4.8 kVA Electrical connection: CEE plug 16 A Connection voltage: 400V/3Ph+N+PE/50 Hz (+6%/-10%) Refrigerant: R404A! Version: mobile Type: SB11/300/40

Year of construction: 1999, condition: ready for operation (used), General Data Machine weight 5000 kg Prjdpfx Agsv Nb Dqe Djd Control Unit Brand SIEMENS Main Drive Spindle speed range 6000 - 9000 rpm Spindle motor power 12 kW Number of axis 3 Movement X-Axis Movement 3000 mm X-Axis Rapid Traverse 50 m/min Y-Axis Movement 1000 mm Y-Axis Rapid Traverse 50 m/min Z-Axis Rapid Traverse 25 m/min Tools Max weight 6 kg Max tool diameter 150 mm Type of tool holder HSK F63 Additional Equipment 1 vertical drilling unit in Y Direction 1 vertical drilling unit in X Direction 1 main spindle with programmable direction of rotation 1 centrally integrated CNC axis rotating 360 degrees 1 adapter unit saw, fixed at 90 degrees Saw blade diameter: 200 mm 1 adapter unit horizontal drilling and milling head (cross head) 1 adapter unit horizontal milling cutter (face milling) 2x adapter units for hinge drilling Includes 1 new Siemens vacuum pump + numerous accessories This 3-axis IMA BIMA 310 120/300 CNC Wood Machining Centre was manufactured in 1999. If you are looking to get high-quality woodworking capabilities, consider the IMA BIMA 310 120/300 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Year of construction: 2005, condition: ready for operation (used), Zig-zag fine material separator Cross section: approx. 500 / 300 mm For the separation of fines from the regrind Equipment: 2x rotary valve type NU 250 Pedpsf Rlc Djfx Ag Dord With Vulkollan seal, each 0.37 kW, 1x material conveyor blower type MFT 75/500, 11 kW

Condition: ready for operation (used), Size: max 480 x 325 mm Size untrimmed with lap: max 480 x 325 mm min 90 x 115 mm Size untrimmed without lap: max 440 x 300 mm min 158 x 115 mm Size trimmed with lap: max 470 x 320 mm min 148 x 105 mm Size trimmed without lap: max 430 x 295 mm min 148 x 105 mm Pjdod N D Nwspfx Ag Dsrd Speed: max 14.000 c/h Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder: • 5 station gathering track & chain three knife trimmer: • three knife trimmer 251 • compensating stacker CS-20

Condition: new, Year of construction: 2025, Slow-running mill for storage Rotor diameter (mm) 180 Rotor width (mm) 300 Rotor speed (rpm) 150 Drive (kW) 4 Number of rotor blades 30 Number of stator blades 2 Screen perforation (mm) >5 Approx. weight (kg) 180 The slow-running mills of the GSL 180 series have a rotor diameter of 180 mm and working widths from 120 to 430 mm. Prsdjt Aam Hjpfx Ag Djd The rotor is driven directly by a gear motor. The low rotor speed ensures a pleasant noise level and a high-quality product. The special rotor blades can be resharpened several times, eliminating the need for complex adjustment work. The mills are fed via a noise-reducing sandwich-type hopper. Depending on the task, the machines can be equipped with various hopper variants. Low and high base frames are available as options. The ground material is either vacuumed or filled into bags or a plastic container. Good accessibility for simple and quick maintenance work is ensured by the Quick Snap locking system.

Condition: used, functionality: unexamined, Labeller / label printer from ongoing production Prsdpewip Suofx Ag Ded CAB Hermes A4L/300 see manual in the attachment several units available

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 201116012032794, clamping force: 1,200 kN, displacement volume: 147 cm³, overall weight: 6,100 kg, input current: 46 A, Machine is in very good overall condition, serviced, connected in production. Demag is placed in Žiar nad Hronom, Slovakia, K-system company. In case of your interest we will be supportive with loading on truck. Prjdpfx Aexg Ek Sog Dod

Condition: used, Year of construction: 1996, Oscillation ja ja / nein nein ja/nein ja ja/nein Motor output 2,8 kW Table dimensions 840x340 mm Weight ca. 350 kg Podpfsvwfc Tsx Ag Dord

Condition: as good as new (ex-display), Hammer mill Manufacturer: NEUE HERBOLD Prjdjbxadnjpfx Ag Dod Type HM 450 / 300 Drive: 18.5 kW - show room machine - crushing of brittle plastics such as electronic scrap, wood scrap, and organic insulation material.

Condition: good (used), Rebuilt: 2015 Size: 480 x 325 mm Speed: 14.000 c/h Equipment: gathering chain & feeder: • 7 station gathering track & chain • 6 feeders 345 • 1 cover folder feeder 1528 Prjdpsdympcefx Ag Djd stitching unit & trimmer: • stitching unit 300 • 2 stitching heads HK 75 • three knife trimmer 251 • 2 sets of knives delivery: • belt delivery

Condition: new, Year of construction: 2025, Bin capacity: 40 [kg]. Capacity: Up to 140 [bulbs/min]. Raw material size: 45 - 140 [mm]. Overall width of device: 1050 [mm]. Total height of the machine: 1880 [mm]. Total length of machine: 4830 [mm]. Number of operating paths: 2 loading height of onion: 1000 [mm] Height of onion pick-up: 700 [mm] Height of waste collection: 400 [mm]. Power supply: 3 x 400 [V] / 50 [Hz] Installed power: 1,2 [kW]. Compressed air connection: 8-10 [bar]. Air consumption: 1,9 [m3/min]. Noise level: Over 80 [dB]. Peded Nimaopfx Ag Djrd Construction materials: Stainless steel and plastics approved for contact with food CE certificate: yes Cutter: no

Condition: good (used), Year of construction: 2014, Machine Type: 3D CNC Coordinate Measuring Machine (CMM) Brand: Werth Model: ScopeCheck 400/400/300/FB/Z Year of Manufacture: 2014 Measuring Range X-axis: 400 mm Measuring Range Y-axis: 400 mm Measuring Range Z-axis: 300 mm Machine Design: Fixed Bridge (FB) with motorized Z-axis (Z) Sensors: Multi-sensor system – Optical and Touch Probe capable Optical System: High-resolution camera with telecentric or zoom optics Measurement Type: Non-contact and contact (hybrid capability) Control System: CNC-controlled in all 3 axes Software: Werth WinWerth® Prodpfx Asv R Uzleg Dod Accuracy: Micron-level precision (depends on configuration) Applications: Dimensional inspection, quality control, reverse engineering Industries: Aerospace, automotive, medical, precision engineering Power Supply: 230V / 50Hz (typical) Weight: Approx. 1000 kg (depending on configuration)

Year of construction: 1988, condition: used, 480 x 325mm; 14,000c/h; Prjdpfjbnczbex Ag Dod 7 stations 6 feeders 279 Card gluer 1 folder feeder 1529 Stapling station 300 Trimmer