Used Profile Grinding Discs for sale (13,757)

Condition: used, tank capacity: 450 l, GENERAL Design: vertical Remarks: 1 folding segment of the lid is loose Speed: 71 / 142 rpm Inner diameter: 950 mm Total height: 1,550 mm Power: 0.55 / 0.75 kW Top cover: bolted lid with folding segment Location: Bremen Volume: 450 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 600 mm Last application: beverage industry Bsdpfxjyclh Re Acveda TANK Bottom: flat bottom with slope Support type: feet Number of feet: 3 pcs EQUIPMENT Outlet: 50 mm Note: slight residues MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Voltage: 380 volts Agitator equipment: motor/gear unit with corrosion marks; 1 hole in the ventilator housing (see photos)

Year of construction: 2011, condition: used, Condition: used Location: external storage Type: MRPX 810CA-SK Year of manufacture: 2010 Max. bowl speed: 6,250 rpm Motor speed: 1,500 rpm Internal bowl diameter: 438 mm Min./Max. process temperature: 0 / 100°C The separator is offered without the "bowl"; this can be purchased separately from Alfa Laval for €60,000. The separator is in as-new condition and has zero operating hours. Full documentation is available. Product data Overall height: 2,005 mm Overall length: 2,450 mm Overall width: 1,305 mm Remarks Bodpjyr I Rasfx Acveda The fully hermetic separation system MRPX 810 is designed for the removal of suspended solids with particle sizes from approximately 0.5 to 500 μm from a liquid phase with lower density than the solids. The solids content is typically in the range of 0.1–20 vol.-%. The main applications are bacteria, rDNA products, enzymes, cell cultures, and vaccines. It is also suitable for industrial fermentation processes using microbial cells for the production of acids, chemicals, fuels, etc. Applications requiring low oxygen uptake can also benefit from the hermetic design features of the MRPX 810 separator.

Condition: used, axle configuration: 2 axles, first registration: 11/2006, color: other, Year of construction: 2006, Empty weight: 5.700 kg Axle 1: left 10 mm right 10 mm Axle 2: left 8 mm right 8 mm Bodpfxoxt Ezwo Acveda Axle 3: left mm right mm

Condition: used, axle configuration: 3 axles, first registration: 06/2007, color: other, Year of construction: 2007, Empty weight: 8.075 kg Axle 1: left 6 mm right 6 mm Axle 2: left 10 mm right 10 mm Bdsdpfjxqztkjx Acvea Axle 3: left 6 mm right 6 mm

Condition: used, axle configuration: 3 axles, first registration: 10/2007, color: other, Year of construction: 2007, Empty weight: 7.460 kg Axle 1: left 12 mm right 12 mm Axle 2: left 10 mm right 10 mm Bdodoxru I Rspfx Acvsa Axle 3: left 12 mm right 12 mm

Condition: used, axle configuration: 3 axles, first registration: 11/2007, color: other, Year of construction: 2007, Empty weight: 6.805 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Bdjdjxr Akaopfx Acvja Axle 3: left 10 mm right 10mm

Condition: used, axle configuration: 3 axles, first registration: 05/2009, color: other, Year of construction: 2009, Empty weight: 6.905 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Bodpfxoxt E E Aj Acvjda Axle 3: left 10 mm right 10 mm

Condition: excellent (used), Year of construction: 2010, Cylindrical grinding machine Fab. Robbi Group Typ. Omicron 600 RT5 Year 2010 Technical data Make Robbi Group, IT Type OMICRON 600 RT5 Year of manufacture 2010 table Center width 600 mm Sanding length max. 600 mm Swivel range + 9° / - 5° Center height above table 160 mm Workpiece weight between centers 120 kg Workpiece weight for fly grinding 40 kg Tailstock Quill stroke 25 mm Quill diam. 43 mm Internal mounting cone CM 4 Workpiece headstock Rotation speed 0 - 600 Internal mounting cone CM 4 Spindle passage 26 mm Grinding wheel Diameter 450 mm Width min 20 / max 50 mm Bore 127 mm Equipment Bjdpfx Aewhm Rfjcvsda - Manual or automatic cycle - Automatic dressing compensation - Simplified presetting of grinding wheel and workpiece All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Okamoto ACC 45 DXA Bdsdsyyzpmepfx Acvsa 150 x 450 mm

Condition: like new (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 956158, control type: manual, number of rollers: 3, shaft diameter: 75 mm, overall weight: 1,300 kg, total length: 1,000 mm, total width: 1,130 mm, total height: 1,100 mm, power: 4 kW (5.44 HP), input voltage: 380 V, SOLD ROUNDO (Sweden) electro-hydraulic section bending machine Model: R-3 Capacity: 14 cm3 Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-7-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1,300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine Bdedpfxexl Sq Ae Acvea - Can operate in horizontal or vertical position - 3 driven rolls Includes: Brake motor Push-button control Digital read-out 1 extra set of rolls for pipe Ø 48 and Ø 42 mm Dutch-language manual Price of the ROUNDO section bending machine, model R-3: on request via email The machine has its original paint and has seen very little use! Delivery conditions: Delivery time: ex stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe specializing in trading and stocking mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). See our website for our current stock list. We assemble and/or disassemble these systems in a safe manner with VCA-certified technicians, and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for Bdedpoyx Dwkefx Acvoa 325 hours since then.

Condition: used, Year of construction: 1970, surface area 600 x 200 mm Magnet size 500 x 200 mm dimensions of grinding wheel 225 x 25 x 51 mm Distance spindle/table max. 400 mm Table longitudinal feed 1 - 20 m/min Bjdpfxeyyqqme Acvsda creep feed 0 - 500 mm/min grinding wheel speeds 800 -4.200 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine was overhauled in 2002. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, axle configuration: 3 axles, first registration: 02/2016, color: other, Year of construction: 2016, Empty weight: 6.480 kg Axle 1: left 14 mm right 14 mm Axle 2: left 6 mm right 4 mm Axle 3: left 12 mm right 12 mm Bdsdpfxsyxrqre Acvoa

Condition: used, axle configuration: 3 axles, first registration: 01/2008, color: other, Year of construction: 2008, Empty weight: 6.600 kg Axle 1: left 4 mm right 6 mm Axle 2: left 5 mm right 8 mm Bjdeyxrmmopfx Acveda Axle 3: left 12 mm right12 mm

Condition: used, axle configuration: 3 axles, first registration: 01/2012, color: other, Year of construction: 2012, Empty weight: 6.690 kg Bjdpeyxrf Aefx Acvoda Axle 1: left 4 mm right 10 mm Axle 2: left 5 mm right 10mm Axle 3: left 10 mm right 12 mm

Condition: used, axle configuration: 3 axles, first registration: 02/2005, color: other, Year of construction: 2005, Empty weight: 6.720 kg Axle 1: left 10 mm right 10 mm Bodeyxrcuspfx Acvsda Axle 2: left 5 mm right 12 mm Axle 3: left 12 mm right 5 mm

Condition: new, Year of construction: 2025, 0600 mm Bedpfswp Tmvsx Acvjda 300 mm 342 mm 700x340 mm 355x38x127 mm

Condition: excellent (used), grinding length 600 mm grinding width 300 mm workpiece height 350 mm magnetic clamping plate, electical 500 x 200 mm grinding wheel diameter 225 x 25 x 51 mm total power requirement 4 kW weight of the machine ca. 2,1 t Bdedpfx Asyyqt Iecvea dimensions of the machine ca. 1,5x1,5x1,8 m

Condition: good (used), Grinding wheel puller, cup wheel puller, double bench grinder puller, surface grinder puller, cylindrical grinder puller, dressing head, dressing head for grinding machines Quantity: 1 piece available Bsdpod R Ikdsfx Acvsda -Dimensions: 325/130/H135 mm -Weight: 7.3 kg

Condition: good (used), Disc valve, flap valve, ball valve, butterfly valve, shut-off valve Bsdob A S Easpfx Acvjda -without: drive -Connection: DN50 -Material: Stainless steel -Weight 2 kg

Condition: used, Year of construction: 2008, Deburring machine belt grinder Manufacturer: Weber Bedpeyy Dcvsfx Acvjda Type: MK 900 Year of manufacture: 2008 Control: Weber "i-Touch" controller with multi panel Abrasive belt length: 2,620 mm Working width: 900 mm Working height: 900 mm (constant) Workpiece thickness: 3–120 mm (depending on model, up to 1–100 mm) Feed rate: 1–10 m/min (infinitely variable) Belt drive power: up to 37 kW (depending on station) Specially designed for processing oxy-fuel and plasma cut parts (heavy plate) 2426

Condition: used, Year of construction: 2012, grinding diameter max. 320 mm grinding length 1.500 mm centre height 160 mm Control Touch Jones & Shipman between centers max. 100 kg Traverse Z-Axis 1.645 mm traversing speed m/min swivable +5 / -5 ° Traverse X-Axis 260 mm traversing speed - 6 m/min grinding wheel motor 7,5 kW cutting speed 45 m/s Grinding wheel Ø x width x bore 450 x 50 x 203,2 mm Swivel range -15 / +90 ° turning speed range 0 - 660 U/min Torque 27 Nm tool adaptor MK 3 weight of the machine ca. 8,5 t Bdjdpfx Acjtqmrpjvea dimensions of the machine ca. 5,5 x 2,5 x 2,0 m Cylindrical Grinding Machine JONES & SHIPMAN - Suprema Easy 1500 E - Replacement grinding wheel flange - Multi-grain diamond (for circumferential and lateral dressing, 10mm, 1 carat) - Tailstock with micro adjustment (max. adjustment range +-0.05mm) - Pneumatic quill retraction - Two-jaw bezel (range 8-75 mm)

Condition: good (used), Year of construction: 2013, grinding diameter 140-355 mm grinding length 3000 mm centre height 260 mm weight of the machine ca. 8,3 t dimensions of the machine ca. 8500 x 3500 mm SA 6Ux3000 external cylindrical grinding machine Year of manufacture: 1981 Retrofit: 1 x 2013 SERWEMA Maximum grinding diameter with tailstock: 140 mm Maximum grinding diameter without tailstock: 355 mm Maximum grinding length: 3,000 mm Center height 260 mm Workpiece weight max. 500 kg Machine footprint 8500 x 3500 mm Bdedpfx Aoynmpyocvea Machine weight 8500 kg

Condition: good (used), grinding diameter 450 mm grinding length 600 mm Bjdpfjxcblqox Acvsda centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details Bsdpoyxpawsfx Acvjda - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279