Used Power for sale (38,411)

Condition: excellent (used), CATALOG NUMBER 7895 TECHNICAL DATA - Motor: 7.5 kW - Voltage: 400 V - Number of waste containers: 2 pcs - Extraction capacity: approx. 8900 m3/h - Rotational speed: 3000 rpm - Negative pressure: 2800 Pa - Extraction speed: 28 m/s - Filter area: 20 m2 - Number of filters: 45 pcs - Filter category: G - Filter material: polyester - Extraction duct diameter: 300 mm - Overall dimensions (L/W/H): 2370x1170x2300 mm - Weight: 470 kg ADVANTAGES – Mobile sawdust containers – Unpainted – Used extraction system – Very good condition Hfsdpfxoykavrj Afnsc Net price: 13,900 PLN Net price: 3,300 EUR based on 4.2 EUR exchange rate (Prices may vary subject to significant fluctuations)

Condition: used, fuel type: diesel, first registration: 05/2018, Year of construction: 2017, operating hours: 12,770 h, Used Liebherr L576 X Power wheel loader – total weight 29,000 kg – operating hours 12,776 – engine 215 kW – speed 40 km/h – axle load distribution 15,500 kg – = More information = Unladen weight: 29,000 kg Reference number: 93 For more information, please contact Miguel Cubas. = Company information = Hfodpsya Iz Usfx Afnjc We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, Bosch CHP Complete System (1 Set) – CHP CE 140 N (Year 2016) including Cabero Heat Exchanger/Dry Cooler (Year 2017) For sale is 1 complete, homogenous CHP unit consisting of 1× Bosch CHP Module CE 140 N (gas-powered CHP) including the corresponding peripherals as well as 1× Cabero heat exchanger/dry cooler. The unit is operational and in very good condition. Sale only as a complete package. Hfsdeycl Abepfx Afnsc 1) CHP / CHP Module Manufacturer: Bosch KWK Systeme GmbH Model: CHP CE 140 N Year of manufacture: 2016 Engine: MAN 2867 E 218 (gas-powered Otto engine) Performance data (CE 140 NA / typical as per datasheet series): Electrical output (nominal, 90/70°C): 70 – 140 kWel Thermal output (nominal, 90/70°C): 106 – 212 kWth Gas input: 192 – 384 kW Modulation range: 50 – 100 % Net efficiency: electrical 36.5 %, thermal 55.2 %, total 91.7 % Power supply: 400 V / 50 Hz, 3-phase Own energy consumption (electrical): 2,500 W Max. operating pressure (heating circuit): 6 bar Acoustics / emissions (CE series): Module noise level: 71 dB(A) NOx (dry, 5% O₂): ≤ 0.250 g/Nm³ CO (dry, 5% O₂): ≤ 0.300 g/Nm³ Dimensions (CE 140 NA – indicative values): Width W ≈ 1,160 mm Length L ≈ 3,850 mm Required room height min. ≈ 2,900 mm Wall clearance A > 900 mm 2) Cabero Heat Exchanger / Dry Cooler (1 unit) Manufacturer: Cabero Designation / Item No.: GCDD099MB-2X7-64-S D (EB) EC AXI A Version / Standard: PED / DIN EN 14276-2:2011 Year of manufacture: 2017 Heating surface: 2,742.65 m² Medium: Ethylene glycol 34% / Water 66% Fluid Group: 2 Max. allowable pressure (PS): 12 bar Test pressure (PT): 17.16 bar Permitted temperature range (TS): −40 / +60 °C Volume: 439.5 L Pressure test date: 03./04.07.2017

Condition: used, This listing is for One Agilent Keysight E36103ADC Power Supply (More Available) These unit is are all in full working condition and is ready for immediate use Overview: Keysight E36103 Model: E36103 DC Power Supply Output: 20 V, 2 A, 40 W Successor to the older E36103A, which is now obsolete Key Features: High programming accuracy: Voltage: ±(0.05% + 7 mV) Current: ±(0.05% + 1 mA) Ripple & noise: Voltage: 0.8 mV rms, 15 mV peak-to-peak Current: ~1 mA rms Keysight Technologies Hfsdoxhfckopfx Afnsc Readback accuracy: Voltage: ±(0.05% + 5 mV) Current: ±(0.05% + 1 mA) Keysight Technologies Compact form factor: 2U ¼‑rack width, compact bench size with 3.7 kg weight Farnell UK Display & controls: High-contrast OLED screen visible from various angles Intuitive rotary knob and front-panel interface for quick digit‑by‑digit adjustments Connectivity: USB and LAN (LXI Core) Supports BenchVue for intuitive control, data logging, and automation Protection features: Overvoltage, overcurrent, and overtemperature safeguards included

Condition: used, This listing is for the Isotech IPS 303DD Power Supply The unit is in full working condition and is ready for immediate use Description For sale is a used Isotech IPS 303DD DC Bench Power Supply, a reliable and accurate unit ideal for electronics testing, lab work, or educational environments. This model features precise voltage and current control, dual digital displays, and fine/coarse adjustment knobs for both voltage and current, offering versatility and ease of use in any bench setup. Key Features Output Voltage: 0 – 30 V DC Output Current: 0 – 3 A Dual LED Display: Simultaneous voltage and current readout Adjustable coarse and fine controls Constant Voltage (CV) / Constant Current (CC) operation Overload and short circuit protection 4mm safety binding posts for secure connections Internal fan cooling for thermal management Ideal For Electronics hobbyists and repair professionals Engineering and science students Hfsdpfx Ajxhfqhjfnsc Workshops, makerspaces, and test labs

Condition: used, This listing is for 1 of 11 Invitrogen Powerease 500 Power Supply. The unit is in full working condition and is ready for immediate release. This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels Hedpfx Ajxx Afkjfnsfc 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: used, This listing is for the Lascar PSU 130 CMD23 Benchtop Power Supply The unit is in full working condition and is ready for immediate use The Lascar PSU 130 is a compact, single-output benchtop power supply module. Hfedpfxexhffxe Afnoc It provides an adjustable DC output ranging from 1.5 V to 30 V, with a maximum current of 1 A—ideal for electronics labs or testing environments Specifications include: Wide input voltage range: ~100–240 VAC, 47–63 Hz Built-in over‑voltage, over‑current, and short‑circuit protection, plus excellent regulation with low output ripple Front panel includes a back‑lit digital display for voltage and current, a rotary adjustment knob, and 4 mm output terminals

Condition: used, This listing is for the Invitrogen PowerEase 500 Power Supply The unit is in full working condition and is ready for immediate use The Invitrogen PowerEase 500 is a simple, sturdily constructed, leak-free, and user-friendly electrophoresis power supply designed for mini-gel electrophoresis of DNA, RNA, or proteins. Its compact benchtop design is ideal for laboratory settings focused on reliability and convenience. Summary Hfjdpfx Afexhfzmonec The PowerEase 500 combines robust construction with microprocessor control and flexible programming, making it a reliable workhorse for gel electrophoresis. Its dual-output design, programmable memory, and simple user interface help streamline repetitive lab work while maintaining precision and safety.

Condition: used, This listing is for the Thermo Fisher Invitrogen E-Gel TM Power Snap Electrophoresis Device The unit is in full working condition and is ready for immediate use The E-Gel™ Power Snap Electrophoresis Device is a compact, all-in-one benchtop system that streamlines both DNA separation and gel visualization. Designed for fast, safe, and convenient electrophoresis, this system integrates the power supply, blue-light transilluminator, and amber filter in one unit—making it ideal for a wide range of DNA analysis workflows Key Features Streamlined Electrophoresis & Imaging: All-in-one system integrates gel running and image capture. Fast Separation: Run DNA samples in as little as 10 minutes using dry, precast E-Gel™ agarose gels. Real-Time Visualization: View and capture DNA samples as they separate with integrated blue-light and amber filter technology. Instant Image Capture: The docked E-Gel™ Power Snap Camera allows high-resolution gel imaging without the need for external power or desktop connections. Benchtop Friendly: Small, fast, and powerful with a compact footprint for efficient and convenient use. Hfedpfxexv Az Te Afnec Pre-Programmed Protocols: Built-in methods for all compatible E-Gel™ agarose gel types for a plug-and-play experience. Safe and Simple: Blue-light imaging avoids the hazards of UV light.

Condition: used, This listing is for a Powervar UPM UPS Power Supply . The unit is in full working condition and is ready for immediate release. The Powervar UPM UPS is a power conditioned, sine-wave uninterruptible power supply designed to provide clean, conditioned power free from noise, voltage spikes, and common-mode disturbances. Key Features: Power Rating: The Powervar UPM UPS has a power rating of 1440VA/1296 Watts. Inverter Waveform: The UPS produces a low distortion sine wave output. Transfer Time: The transfer time is 4 ms. Frequency: The typical frequency is 60 Hz. Efficiency: The online efficiency (without charger) is 91%. BTU/Hr: The UPS has a BTU/Hr rating of 459. THD: The total harmonic distortion (THD) with 100% resistive load is not specified. Protection Features: Surge Diverter: The UPS is equipped with a surge diverter to protect against high-voltage surges. Noise Filter: The UPS has a built-in noise filter to reduce electromagnetic interference (EMI). Low-Impedance Isolation Transformer: The UPS features a low-impedance isolation transformer to provide fully conditioned isolated power. Hjdpfx Aoxxy Uiefnofc Ground Guard Technology: The UPS is designed with Ground Guard technology to prevent ground loops and eliminate the need for special dedicated-isolated electrical circuits.

Condition: used, This listing is for a GE Healthcare EPS 601 Power Supply. The unit is in full working condition and is ready for immediate release. The GE Healthcare EPS 601 Power Supply is a reliable and high-precision power source tailored for electrophoresis applications. With advanced safety features and programmability, it is ideal for laboratories performing a wide range of electrophoresis techniques. Key Features: Automatic Cross-Over at Preset Limits: Automatically adjusts the controlling parameter (voltage, current, or power) based on programmed limits and conductivity changes during the run. Supports Multiple Electrophoresis Units: Connects up to two electrophoresis units simultaneously, enabling efficient operation with the same programmed method. Programmable Memory: Saves up to three user-defined programs, facilitating repeatable and consistent workflows. High Precision and Safety: Delivers accurate power regulation with integrated safety features for optimal performance and protection of samples and equipment. Versatile Applications: Compatible with various electrophoresis techniques, including: Hfjdpfoxxz Ttsx Afnjc SDS-PAGE Native PAGE Agarose electrophoresis Electroblotting DNA pulsed field electrophoresis DNA fragment separation DNA submarine electrophoresis Troubleshooting and Maintenance: Error Codes: Displays specific error codes for easy troubleshooting of system issues. HALT Mode: Automatically switches the program to HALT mode and cuts off the output in response to errors, ensuring safety. FAIL Mode: Engages FAIL mode for critical errors, turning off the output to prevent damage or unsafe operation. Specifications: Maximum Voltage: 600 V Maximum Current: 400 mA

Condition: used, This listing is for a Bio-Rad PowerPac HC High-Current Power Supply. The unit is in full working condition and is ready for immediate release. Elevate your laboratory’s performance with the Bio-Rad PowerPac HC High-Current Power Supply, engineered specifically for high-current applications like western blotting and high-throughput electrophoresis. This robust power supply delivers exceptional reliability and precision, ensuring your experiments achieve optimal results every time. Key Features: Powerful Output: With an impressive output of 250 V, 3.0 A, and 300 W, the PowerPac HC is designed to handle demanding electrophoresis tasks effortlessly. Intuitive Controls: The fully adjustable voltage, current, and power settings allow for tailored configurations, while the two-line, 16-character LCD display provides clear visibility for easy programming and monitoring. Versatile Applications: Ideal for western blotting with Bio-Rad blotting cells and suitable for a variety of high-current applications, this power supply adapts to your laboratory needs. Benefits: Enhanced Experiment Efficiency: The intuitive programming enables multistep methods and timed runs, allowing you to choose between constant voltage, current, or power output for maximum flexibility. Hjdpfxoxx Ai Aj Afnsfc Safety Features: Built-in protection against short circuits and excessive voltage incidents ensures the longevity of your equipment, giving you peace of mind during critical experiments. Real-Time Monitoring: Stay informed with real-time voltage and current monitoring, ensuring that your processes run smoothly and effectively. Choose the Bio-Rad PowerPac HC High-Current Power Supply for unparalleled performance and reliability in your laboratory. Experience the difference in your high-current applications and achieve the results you desire with confidence.

Condition: good (used), Powered roller conveyor, L 2450 mm, W 620 mm, NORD gear motor, data according to the nameplate. To operate the roller conveyor, a control unit must be installed, preferably with a frequency inverter for speed regulation. The roller conveyors were set up on the floor. See the attached photo with the leveling plate. Price per unit. 24 units available. Hsdpfx Afex Tfrxjnofc

Condition: new, functionality: fully functional, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 4th – 6th February 2026. For more information go online. Hodpfx Afoydc Tgjnofc

Condition: new, pressure 220 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 160 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 160 mm oil volume 300 ltr. voltage 400 Volt total power requirement 18.5 kW weight 13800 kg range L-W-H 5150 x 2250 x 3000 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke Hjdoxaathspfx Afnefc * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - Universal die block - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 220 t chamfer lenght 3760 mm distance between columns 3250 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 160 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 160 mm oil volume 300 ltr. voltage 400 Volt total power requirement 18.5 kW weight 12906 kg range L-W-H 5100 x 2250 x 2900 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool Hfjdpfx Afsw U U Rrjnoc - Universal die block - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 100 t chamfer lenght 2600 mm distance between columns 2200 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 9.5 mm/sec return speed 155 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm oil volume 150 ltr. voltage 400 Volt total power requirement 7.5 kW weight 6850 kg range L-W-H 3750 x 1950 x 2800 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp Hjdpfxoxaaqye Afnefc - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15.0 kW weight 9450 kg range L-W-H 4250 x 2150 x 2800 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control Hjdexaax Rspfx Afnsfc - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, pressure 60.0 t chamfer lenght 2100 mm Hsdsxabckopfx Afnsfc distance between columns 1700 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm oil volume 150 ltr. voltage 400 Volt total power requirement 7.5 kW weight 5640 kg range L-W-H 3250 x 1960 x 2750 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 40.0 t chamfer lenght 1270 mm distance between columns 1050 mm column arm 350 mm dayligth 387 mm work stroke 170 mm table height 850 mm back stop - adjustable 800 mm adjustment speed 230 mm/min ajustment speed 140 mm/sec working feed 10.0 mm/sec return speed 170 mm/sec total power requirement 5.5 kW weight of the machine ca. 3220 kg dimensions of the machine ca. 2150 x 1650 x 2300 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left Hfsdpfx Aew U U Rlefnjc - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 175 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec return speed 135 mm/sec work speed 10,0 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90,0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15,0 kW weight 11.950 kg range L-W-H 5100 x 2150 x 2850 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC Hfjdpfxsxabapj Afnjc - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke Hsdpfsxabt Aox Afnjfc * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: good (used), functionality: fully functional, Please email or call for further details Hfjdpfsxw Il Tex Afnoc

Condition: used, Year of construction: 2012, operating hours: 5,570 h, * Digging depth approx. 5,000 mm, * Dumping height approx. 5,700 m * Engine Deutz 4-cylinder TCD 2012-L04, * 5.1 km/h, * 500 series rubber tracks, * approx. 2,490mm dozer blade, additional piping -6x approx. 1.95 m. trench bucket, Powertilt PTS-10 swivel device, * Lehnhoff mechanical quick coupler MS 10, * approx. 1.95 trench bucket + approx. 50cm deep drainage bucket Hjdpskd Hipjfx Afnofc ----Sale only to businesses. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. EQUIPMENT + ACCESSORIES.The basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks are our general terms and conditions (see legal notice).

Condition: used, Year of construction: 2012, operating hours: 5,570 h, Digging depth approx. 5,000 mm, dump height approx. 5,700 m engine Deutz 4-cylinder TCD 2012-L04, 5.1 km/h, 500 rubber tracks, approx. 2,490mm dozer blade, additional piping -6x approx. 1.95 m. trench bucket, Powertilt PTS-10 swivel device, Lehnhoff mechanical quick coupler MS 10, approx. 1.95 trench bucket + approx. 50cm deep drainage bucket ----Sale only to businesses. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS WITHOUT GUARANTEE. EQUIPMENT + ACCESSORIES.The basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks are our general terms and conditions (see legal notice). Hodpfxjkd Hiwo Afnsfc