Used Pottinger Novacat 302 for sale (439)

Condition: new, empty load weight: 680 kg, maximum load weight: 820 kg, overall weight: 1,500 kg, loading space length: 2,970 mm, loading space width: 1,960 mm, loading space height: 2,300 mm, loading space volume: 13.8 m³, color: black, construction height: 2,940 mm, working width: 2,050 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, sheet steel sandwich body 40mm walls, braked, PVC floor, sales hatch + bag storage, gas door, * IMMEDIATELY AVAILABLE * Sheet steel sandwich body 40mm walls, braked, PVC floor, sales hatch + bag storage, gas door TECHNICAL DATA - Vehicle type: Box trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Interior dimensions (L x W x H): 297 x 196 x 230 cm - Exterior dimensions (L x W x H): 452 x 205 x 294 cm - Floor loading height: 55 cm - Perm. Total weight: 1,500 kg - Unladen weight: 680 kg - Payload: 820 kg - Chassis: High loader (wheels under the body) - Tires: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, standard with clamp - 100km/h approval: Optional, can be retrofitted Vehicle body: - Brake: Yes - Number of axles: 1 - Floor: Wooden floor - Walls material: Sheet steel sandwich insulated 40mm - Roof material: Sheet steel sandwich insulated 40mm - Colour: Black - Tipping / lowering function: None - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar - Mudguards: Plastic - Side door: No - Side flap: Yes: right and rear - Rear doors / tailgate: Door in front - Rear door / tailgate material: - - Tailgate load: - - Rear clearance dimension: - - Locks box body: Standard door handle - Drive-on angle: - - Supports: 4x scissor supports, rotatable - Lashing rails: Optional, can be retrofitted - Lashing eyes: Optional, can be retrofitted - Interior light: Optional, can be retrofitted - Rear lighting: Incandescent bulbs, lamps mounted on the rear wall - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized - Single-axle - KNOTT overrun hitch - Floor plate made of multiplex - Side walls made of very solid sheet steel sandwich, 40 mm thick - Sales flap on the right side + bag rack - PVC covering on the floor - Door in front wall, lockable from the inside and outside - Step on the drawbar - Support wheel with clamp - 4x scissor supports mounted incl. crank automatic reversing system - plastic mudguards - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light - registration papers: COC papers Accessories can be retrofitted at extra cost - please enquire: - anti-theft device - 100km/H approval with wheel shock absorber - 230V or 400V supply line incl. sub-distribution - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Iajdpou Htllefx Aalep

Condition: used, machine/vehicle number: XL9T0N30004415008, axle configuration: 3 axles, first registration: 10/2004, total length: 9,560 mm, total width: 2,450 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 7,690 mm, color: other, Year of construction: 2004, Axle configuration Tyre size: 385/65 Make axles: ROR Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 50% Ijdsyh N E Iopfx Aalsap Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.860 kg Carrying capacity: 34.140 kg GVW: 38.000 kg Identification Registration number: OH-84-RS

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, featuring knee and toe board. Platform depth: 800 mm Platform width: 600 mm Tread depth: 80 mm Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel equipment: 2 fixed castors Platform height: 1660 mm Including platform: 7 steps Overall construction height: 166 cm platform + 110 cm guardrail Weight: 40 kg Width: 1510 mm Depth: 1510 mm Accessories: 2 handrails Ijdpfx Asyn Ertjaloap Shipping: disassembled, possible. Assembly instructions included.

Year of construction: 2022, condition: used, machine/vehicle number: B2212/041, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Iaodjym N Ipopfx Aalop

Condition: used, Format: 310 x 432mm Iaedpsx N I Uhefx Aalep Equipment: roller adjustment: fully automatic model: flat pile feeder with air-suction type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold sheet size: max. 310x432mm; min. 125x130mm paper weight: 50-190g/sqm pile height: 50mm speed: max. 240 sheets/min. power: 230V/50Hz - 0,6kW dimensions: 1.060x553x670mm weight: 45kg

Condition: used, System: Used decanter / centrifuge Type: KHD S 3-02 Factory number: 9-8531-0-2570 Machine number: 5389 Permissible speed: 2550 Permissible density kg/dm³: 1.3 Drum inside diameter: 650 Drum inside height: 1970 mm Drum wall thickness: 16 mm Drive: Viscotherm hydraulics Material: steel Iodpovz Ic Rofx Aaleap Year of construction: 1994 Total weight: 4400 kg Width: 1960 mm Length: 3630 mm Height: 1300 mm Other: Purchase and rental possible Optional soundproof housing The system is in good condition.

Year of construction: 1992, condition: ready for operation (used), machine/vehicle number: 5059, Machine: used decanter /centrifuge Iaedpfxed E Ahus Aalep Manufacturer: KHD Type: BS3-02 Mach.-Nr.: 5059 Speed of bowl: 2550 I/min Construction year: 1992 Drum Diameter Inner : 650 mm Thickness drum wall: 16 mm Material drum: H 2 Weight of machine: 4400 kg

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 70300 € 1328.67 € 3100 mm Iasdpfx Aaeypbqnolsp 8 mm 8 mm 6 mm 6 mm 5 mm 240 mm 240 mm 190 mm 825 mm 11 kW 4880 mm 1160 mm 1200 mm 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 95000 € 1795.5 € 3100 mm 13 mm 12 mm 8 mm 13 mm 10 mm 10 mm 8 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 5310 mm 1660 mm 1590 mm 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules Iedoypbqhspfx Aaloap OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, Year of construction: 2024, neu 2024 8319 prompt, Zwischenverkauf v Türkei 77990 € 1326.78 € 1 70200 € 200 to 3050 mm Y1 / Y2 / X und R Achse 210 mm 2550 mm 250 mm 445 mm hydraulisch 100 mm/s 7 mm/s 73 mm/s 620 (mit optionaler R-Ach mm Iajdpfxowiqp Ij Aalep 250 mm/s 858 mm 104 mm 150 l 15 kW 3750 mm 1390 mm 2500 mm 8160 kg 4 axes (Y1, Y2, X and R axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC CONTROLLED CROWNING TABLE intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN orENGLISH ADVANTGES OF PBF SERIES: - compact structure - low cost due to serial production of standardised models without restrictions in quality and accuracy OPTION: CNC controlled crowning table incl. CNC controlled R-axis (adjustment range in X = 500 mm) incl. DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES! (sample photo)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 55900 € 1056.51 € 3100 mm 9 mm 8 mm 7 mm 7 mm 5 mm 245 mm 245 mm 180 mm Iodpfoyb Sz Iox Aaljap 1,5 / 6 m/min 7.5 kW 5350 mm 1600 mm 1470 mm 6850 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, featuring knee and toe board. Platform depth: 800 mm Platform width: 600 mm Tread depth: 80 mm Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel equipment: 2 fixed castors Platform height: 1660 mm Including platform: 7 steps Overall construction height: 166 cm platform + 110 cm guardrail Weight: 40 kg Width: 1510 mm Iasdpfeyctvcjx Aaljp Depth: 1510 mm Accessories: 2 handrails Shipping: disassembled, possible. Assembly instructions included.

Condition: used, tank capacity: 1,950 l, GENERAL Equipment: Butterfly valve Design: Container Remarks: Frame made of Fe (galvanized); some dents on the containers; in some cases, manhole clamps and outlet valves are made of Fe; alternatively, containers made of stainless steel (#9301) are also available from us; Total width: 1,170 mm Total height: 1,900 mm Total length: 1,320 mm Location: Bremen Nameplate: Volume: 1,950 liters Product-contact material: Aluminum Condition: used Last application: Pharmaceuticals/Food (fennel) TANK Mounting type: Frame EQUIPMENT Ijdpfoyck E Isx Aaloap Manhole/Dome: on the top head (DN 400) Outlet: 100 mm Note: minor residues

Condition: used, tank capacity: 850 l, GENERAL Equipment: Discharge tap, spray head Design: upright Speed: 365 rpm Outer diameter: 920 mm Total height: 2,200 mm Power: 0.25 kW Agitator: propeller Number of agitators: 1 agitator Location: outdoor storage Volume: 850 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 1,250 mm Iasdpfx Aaeyckzvelop TANK Support type: height-adjustable feet Number of feet: 3 EQUIPMENT Manhole / dome: on top cover Note: slight residues MATERIAL PROPERTIES Feet material: stainless steel AGITATOR Voltage: 220/380 volts Agitator arrangement: eccentric in top cover TECHNICAL DATA / DIMENSIONS Floor clearance: 320 mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 42,832 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, controller model: FANUC SERIES 18i MB, clearance between the columns: 2,300 mm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 2,100 mm Travel Z-axis: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Maximum table load: 10,000 kg Spindle taper: ISO-50 Standard spindle speed: 6,000 rpm Max. tool diameter / with empty magazine slot: 127 mm / 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Tool changer capacity: 32 tools Rapid traverse (X-axis): 20,000 mm/min Rapid traverse (Y-axis): 15,000 mm/min Rapid traverse (Z-axis): 15,000 mm/min Iodpfx Aasymxi Aelsap Feed rate: approx. 1 – 10,000 mm/min MACHINE DETAILS CNC control: FANUC SERIES 18i MB Spindle motor power (continuous / 30 min): approx. 22 / 26 kW Operating hours, feed time: 42,832 h Operating hours, automatic mode: 53,246 h EQUIPMENT Automatic head changer (with angular milling head) RENISHAW probe

Year of construction: 2007, condition: used, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Iodex R Aq Tepfx Aaloap Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 60600 € 1145.34 € 3100 mm 10 mm 10 mm 8 mm 8 mm 6 mm 260 mm 260 mm 200 mm 1,5 / 6 m/min 7.5 kW 5350 mm 1600 mm 1550 mm 7685 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Isdpsynm D Rofx Aaloap Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Year of construction: 2014, condition: as good as new (ex-display), Zero point clamping system Make AMF Type 302828-K 20 diameter 110 mm Isdpfsf Dx R Ujx Aaloap

Condition: used, Face drivers Iaedocu Ngkspfx Aalsp Make WMW Clamping ranges 30 - 200 mm pmax 3500 kn Short taper size 5

Condition: used, Year of construction: 2012, operating hours: 325 h, lifting height: 3,020 mm, fuel type: electric, mast type: duplex, fork length: 1,000 mm, total height: 2,180 mm, total length: 2,050 mm, total width: 1,810 mm, color: other, Empty weight: 2.200 kg Lifting capacity: 2.000 kg - Details: - └ Description: Four Way - Year: 2012 Iajdpfx Aasx Srwljlep - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 4V-XT 3020 - Operating hours: 325 - Type: Pedestrian stacker - Lifting capacity: 2000kg - Lifting height: 3020mm - Overhead clearance: 2180mm - Free lift: 0mm - Fork length: 1000mm - Fork width: 1200mm - Options: Breedspoor - Mast: Duplex - Inspection valid until: 02-2026 - Drive: Electric - Brand/Type: Hawker 3PZs315 - Capacity: 315Ah - Battery voltage: 24V - Transport dimensions: 2050mm x 1810mm x 2180mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-3020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1450.0 kg - Maximum load: 2000.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Isdpjrp Dcrefx Aaleap Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma/gas cutting machine PCO-3020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1550.0 kg - Maximum load: 2800.0 kg - Adjustable support legs: 6 pcs Iajdpfx Aash E Izbjljp Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: used, This listing is for the Stuart CR302 Infrared Hotplate stirrer Iaodpfjxhfq Ujx Aaljp The unit is in full working condition and is ready for immediate use Overview & Key Features Infrared (IR) Heating: Utilizes a 900 W infrared heater—this allows it to boil 1 litre of water over 30% faster than standard 1200 W ceramic hotplates. Powerful Magnetic Stirring: Equipped with rare-earth magnets, it can stir up to 15 litres of liquid. Stirring speed is adjustable, ranging from 100 to 1500 rpm, with feedback control to maintain steady rates. Temperature Capability: The hotplate can reach a maximum temperature of 400 °C. Size & Portability: Hotplate surface: 30 × 30 cm Overall dimensions: approximately 32 × 37 × 11 cm (W × D × H) Weight: about 4 kg Power Supply: Designed for use with 240 V, compatible with standard UK lab mains at 50/60 

Condition: good (used), Year of construction: 2005, Trumpf Trulaser 3020, Ijdjv In U Tepfx Aaleap Year of manufacture 2005, Trumpf control, Travel path X/Y/Z 3000/1500/115 mm, All maintenance carried out by Trumpf / maintenance reports available, Laser power 3200 W, Beam on 26,500 hours, Cutting capacity steel max. 20 mm, 2 cutting heads, Pallet changer, 1 original laser table, 1 self-made table,

Condition: good (used), mileage: 682,482 km, power: 390 kW (530.25 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, total length: 8,900 mm, total width: 2,500 mm, Year of construction: 2019, Equipment: ABS, air conditioning, navigation system, parking heater, trailer coupling, = Additional options and accessories = - Air horn - Air suspension - Aluminum fuel tank - Gullet - Power take-off (PTO) - PTO - Radio/Cassette player - Refridgerator - Sleeping cabin - Speed limiter - Sun visor = More information = Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Axle configuration Front axle: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Lift axle; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 12.385 kg Carrying capacity: 15.615 kg GVW: 28.000 kg Condition Technical condition: good Visual appearance: good Financial information Price: On request Identification Registration number: 43-BLT-6 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible.Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Iaedpfjydciusx Aalop Please check before purchasing that all the options described that are important to you are actually present.We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration.Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m.You can find us at:Middelingenseweg 22 5321 JH Hedel The NetherlandsAnd reach us at:Trucks: Passenger cars: Website: Email: