Used Poland for sale (1,392)

Year of construction: 2019, condition: like new (used), ETIKETT LABELLING MACHINE FOR SELF-ADHELSIVE LABELS YOM 2019 NEW CONDITION Dcsdoyynlzepfx Adhjn WAS USED FOR STICKING LABELS WITH NECESSARY DESCRIPTION ON TETRA PAK PACKAGES STILL IN PRODUCTION TILL MAY 15TH

Condition: used, Year of construction: 2003, MAZAK NEXUS VCN 410A Year 2003 Travel in the X-axis: 560 mm Travel in the Y-axis: 410 mm Dodpszpynksfx Adhjcn Travel in the Z-axis: 508 mm Table length: 900 mm, Table width: 410 mm Tool magazine: 30 Spindle taper: CAT 40 Max. spindle speed: 12000 rpm Spindle motor power: 11 kW Documentation included Coolant tank with pumps

Condition: ready for operation (used), Year of construction: 2013, Machine in operation since: 2013 Reason for sale: Replacement as part of the standardization of the machine park Current operating speed: Stable production at 100 m/min Video reference: The machine is running at 100 m/min in the presented video The machine is sold together with integrated 6th generation Hunkeler unwinding and rewinding units. Year of production: 2013 Printing method: Piezo single-pass printing, four tones per drop RIP: EQUIOS Ink: Water-based pigment inks / water-based dye inks Resolution: Maximum 720 x 360 dpi Product configuration: Dual Engine Duplex Printing speed: Maximum 128 m/min (419.94 ft/min) Paper width: 165-520 mm (6.5"-20.47") Printing width: 150-506 mm (5.9"-19.92") Dimensions (W x D x H): 2,186 x 1,766 x 1,905 mm Width including operation panel: 2,028 mm Weight: 1,766 kg (3,894 lb) - Simplex POWER SUPPLY Dcsdjz E Nz Aopfx Adhon Printer: Three-phase 200-240 V, 25 A / 380-440 V, 15 A Single-phase: 200-240 V, 13 A Single-phase: 100-240 V, 2 A OPERATING ENVIRONMENT Temperature: 18-24°C Relative humidity: 40-60% No sudden temperature changes No condensation

Condition: used, functionality: fully functional, overall weight: 7,640 kg, Year of construction: 2001, operating hours: 4,399 h, Equipment: all wheel drive, For sale: Manitou MT 932 Maniscopic telescopic handler, manufactured in 2001, with 4,399 operating hours. The machine is fully operational and ready for immediate use. It has been used within our company and has undergone regular servicing. Technical specifications: Dodpfjz Dx U Aex Adhecn Manufacturer: Manitou Model: MT 932 Maniscopic Year of manufacture: 2001 Operating hours: 4,399 h Performance: - Rated lifting capacity at 500 mm load centre: 3,200 kg - Lifting capacity at maximum height: 1,500 kg - Lifting capacity at maximum forward reach: 500 kg - Maximum lifting height: 9.00 m - Maximum horizontal reach: 6.58 m - Machine weight: approx. 7,640 kg Engine and drivetrain: - Perkins 1104C-44 diesel engine - 4 cylinders - Displacement: 4.4 l - Power: 61.5 kW / 83 HP - 4x4 drive - Steering modes: 4-wheel steering / 2-wheel steering / crab steering Cabin and equipment: - Enclosed cabin with heating - Full glazing - Work lights - Warning beacon Included attachments: - Fork carriage with adjustable forks - Snow / earth blade Technical condition: - Engine starts without problems, even when cold - No visible excessive smoke, according to the current condition - Hydraulic functions are operational - No hydraulic leaks reported - Boom slides and pins without noticeable excessive play The machine is operational and available for inspection and a test drive before purchase. Sales information: - VAT invoice available - Transport can be arranged within Poland and the EU - Payment by bank transfer before collection - Location: 39-200 Dębica, Poland Inspection and test drive possible after prior appointment. Additional photos, video, and a transport quotation are available on request.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 1,280 mm, spindle bore: 105 mm, turning diameter: 11,000 mm, center height: 800 mm, feed length X-axis: 800 mm, feed length Z-axis: 11,000 mm, quill stroke: 200 mm, total length: 16,500 mm, total width: 2,100 mm, total height: 2,200 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 1 rpm, type of input current: three-phase, overall weight: 36,000 kg, rapid traverse Y-axis: 4,000 m/min, workpiece weight (max.): 40,000 kg, Heavy Duty Lathe, type TCG 160 x 11m after overhaul: regrinding of the bed and carriage plate, new bearings on the main spindle, new bearings in the tailstock, new control cabinet with new equipment, 100% new wiring, new cable carriers, new paint, geometry according to ISO 1708. The lathe will be ready in January/February 2027. Special equipment: • 1600 mm (63”) dia. faceplate with 4 jaws • 3-point roller steady rest, dia. 100–400 mm • 3-point roller steady rest, dia. 250–600 mm • set of quadrant gears Dodpfxez Hvyne Adhjcn • electronic tailstock thrust indicator

Condition: used, Year of construction: 2016, DOOSAN LYNX 300M Dcsdez E Rv Ispfx Adhsn YEAR OF MANUFACTURE: 2016 Machine equipped with a C-axis and powered tools. Model: LYNX 300 M, FANUC 0i TF–s control (10.4” LCD display + Manual Guide) Standard equipment: Spindle speed: 3500 rpm Main motor power: AC 15/11 kW Rapid traverse rate (X / Z axes): 24 / 30 m/min Hydraulic 3-jaw chuck, 255 mm Power of tool drive: 5.5 kW (5000 rpm) Max. turning diameter: 370 mm Max. turning diameter over the carriage: 651 mm Max. turning length: 712 mm Spindle bore (max. bar diameter): 76 mm Tool shank cross-section: 25 x 25 mm (Ø40 mm) Number of tool positions: 12 (tool change time: 0.15 s) Tailstock, CE certificate, transformer 2 axial (vertical) powered tool holders + 2 radial tool holders, basic tool holder set Optional equipment: · Chip conveyor · Tool load monitoring system · Preparation for bar feeder · Part catcher (box version) · Automatic tool measuring system · High-pressure coolant system (7 bar) · Oil separator · Three-color status indicator lamp · Fast Ethernet + 2 GB memory in the control

Condition: ready for operation (used), ALFA LAVAL VELVES COMPLETE PROCESSING SMART UNIT WITH CONTROLL BOX YOM 2015 30 VELVES IN COMPLETE EXCELLENT CONDITION The unit is designed for the automatic safe separation of product flows, the management of different product streams, and the safe cleaning of one line without halting production on the other. Dcjdpez Hwhtsfx Adhen

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Dedpszxzagofx Adhscn Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: excellent (used), Year of construction: 2015, feed length X-axis: 190 mm, feed length Z-axis: 515 mm, MAZAK QT SMART 100M (400U) C-axis driven tooling Year of manufacture: 2015 Control system: Mazatrol Smart Chuck size: 6 inches Maximum spindle speed: 6000 rpm Dedjz E Ryyopfx Adhscn Spindle bore: 45 mm Maximum turning diameter: 280 mm Z-axis travel: 515 mm X-axis travel: 190 mm Programmable tailstock Tool probe Coolant tank with pump (no chip conveyor) Documentation 4 driven tool holders (3 angled, 1 straight) 10 standard tool holders MACHINE CONDITION: IDEAL - only 1000 operating hours.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: M71311, functionality: fully functional, operating hours: 1,500 h, pressing force: 160 t, stroke length: 300 mm, operating speed: 110 mm/s, reverse speed: 10 mm/s, table width: 90 mm, table length: 3,060 mm, table height: 960 mm, distance table to ram: 590 mm, total length: 4,000 mm, total width: 1,600 mm, total height: 2,800 mm, overall weight: 15,000 kg, year of last overhaul: 2026, Equipment: safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 160-3100 NS (160T - 3060 mm) Tooling system: WILA Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - Pressing force: 160 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in Y1 / Y2 / X / R / Z1 / Z2 axes - Back gauge controlled in 4 CNC axes - X / R / Z1 / Z2 - 2D graphic control - EC20 model - Light curtain - programmable Dcodez Ibnyopfx Adhon - WILA tooling system - Hydraulic punch clamping and hydraulic die clamping - Lower table compensation - "CROWNING" - CNC controlled - Front supports - 2 pcs, 150 kg/pc, length 950 mm

Condition: like new (used), Year of construction: 2023, functionality: fully functional, CNC Siemens 828 D Year: 2023 • Max. diameter: 400 mm • Max. workpiece length: 550 mm • Axis travel: X-axis: 240 mm Z-axis: 600 mm Y-axis: +/- 60 mm Dodpfx Aey Nzc Ejdhocn Sauter 12-position BMT turret counter-spindle bar feeder complete specifications in PDF file

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 54,484 h, machine/vehicle number: 048, control type: CNC control, degree of automation: automatic, controller manufacturer: Fanuc, laser type: CO₂ laser, laser source manufacturer: Fanuc, laser hours: 16,175 h, laser power: 3,500 W, table length: 3,000 mm, type of cooling: water, overall weight: 8,300 kg, total width: 1,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, To sell used Amada laser cutting machine in continious operation. Located in Poland, Bykow. LCG 3015 LST Laser cutting: 16175 h Machine operating: 30437 h Machine on: 55747 Machine in operation, maintenence records availible. Dcsdpfx Adoz Di E Sehjn Availible now.

Condition: used, Year of construction: 2018, operating hours: 6,600 h, functionality: fully functional, Hyundai Wia E160A 2-axis CNC lathe Year: 2018 Dsdpfx Aezz N Ikodhecn Fanuc I series control Max. turning diameter: 280 mm Max. turning length: 300 mm Spindle bore: 45 mm Chuck: 170 mm 12-tool turret Tool probe Tailstock Documentation Chip conveyor

Condition: excellent (used), functionality: fully functional, CNC Heavy-Duty Lathe POREBA TPK-90N × 2000 mm – SIEMENS CNC We offer a heavy-duty CNC lathe POREBA TPK-90N with a turning length of 2000 mm, equipped with a SIEMENS CNC control. The machine is designed for precise machining of large and heavy workpieces. Its robust construction and massive machine bed, characteristic of POREBA heavy-duty lathes, provide high rigidity during machining. Main technical specifications: Manufacturer: POREBA Model: TPK-90N CNC control: SIEMENS Turning length / distance between centers: 2000 mm Swing over bed: approx. 930 mm Swing over carriage: approx. 630 mm Swing in gap: approx. 1200 mm Spindle bore: approx. 95 mm Max. spindle speed: up to 800 rpm Main motor power: approx. 22 kW Tailstock taper: Morse 6 Dcjdpfx Adez Atg Tehen Main features: SIEMENS CNC control, heavy and highly rigid machine construction, large swing over bed of approx. 930 mm, 2000 mm turning length, suitable for machining large and heavy workpieces, proven design of POREBA heavy-duty industrial lathes. The machine is located in Bydgoszcz, Poland. Inspection and test run are possible by prior arrangement. METALEX – machine tools since 1979.

Condition: used, Year of construction: 1995, total length: 22,000 mm, total width: 7,300 mm, total height: 6,700 mm, cutting range round steel at 90°: 120 mm, type of input current: three-phase, overall weight: 30,000 kg, input voltage: 380 V, cutting range square steel at 90°: 120 mm, input current: 63 A, cutting range flat at 90° (X-axis): 120 mm, space requirement height: 7,000 mm, space requirement length: 25,000 mm, space requirement width: 13,000 mm, Complete KASTO automated long-material storage, handling and sawing system for steel bars, tubes, pipes and profiles. The system consists of a KASTO SSZ Vario 140 Duo automatic storage installation with material handling equipment and a KASTO PKS 140 PL circular saw. The installation is designed for efficient storage and automatic supply of long steel materials directly to the cutting process. A key advantage of the system is the very high storage density. The storage system itself, without the saw, measures approximately: 22.0 m × 7.3 m × 6.7 m Floor space required: approx. 160.6 m² At the same time, the system offers a total of: 526 storage locations consisting of: 489 storage shelves with 275 mm depth 37 storage shelves with 565 mm depth Each storage location can accommodate material up to: 6,500 mm length The calculated total horizontal shelf area is approximately: 1,010 m² This means that more than 1,000 m² of usable long-material storage surface is concentrated within only approximately 160 m² of factory floor space. The storage structure consists of 9 double-sided material storage columns. Technical data Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: SSZ Vario 140 Duo Documentation designation: SSL Vario 140 K-Duo Year of manufacture: 1995 Storage locations: 526 Maximum material length: 6,500 mm Maximum material dimensions: Ø 140 mm or 260 × 120 mm Handling device capacity: 10 kN / approx. 1,000 kg Storage location load ratings: 5 / 10 / 15 / 25 kN Storage dimensions without saw: approx. 22.0 × 7.3 × 6.7 m Storage footprint: approx. 160.6 m² Calculated total shelf area: approx. 1,010 m² Dcjdpfsz I Tm Iex Adhsn Storage configuration: 9 double-sided storage columns Electrical supply: 380 V / 50 Hz / 3-phase Power: 20.0 kW Current: 63 A Weight of bridge handling unit according to nameplate: approx. 4,700 kg Integrated / associated sawing machine: KASTO PKS 140 PL circular saw The system is particularly suitable for steel service centres, steel distributors, metalworking companies, machine builders and manufacturers processing large quantities of bars, tubes and profiles. Automatic material storage and handling can significantly reduce internal transport, forklift and crane movements, material searching and preparation time before cutting. Technical documentation and installation drawings are available. Location: Poznań, Poland Inspection possible by prior arrangement. Exact technical condition and final scope of supply can be confirmed during inspection.

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), functionality: fully functional, Mag Impact 2400 VSI (Vertical Shaft Impact) crusher Dcjdpfsz H Rd Uex Adhon Year of manufacture: 2008 Only 3,200 operating hours 250 kW electric motor Maximum feed material size: 130 mm Rotor tip speed: 50 m/s Output product: 0–16 mm (with max. 8/12 mm) Capacity: 250–300 t/h (depending on material and target fraction) Includes support frame and complete electrical system BELT CONVEYORS NOT INCLUDED Includes two additional anvil rings, one of which is designed for double reinforced anvils Total assembly weight: 24,000 kg Crusher is 100% functional and ready for operation This VSI crusher offers the highest material reduction ratio for a 0–80 mm feed; the 0–4 mm fraction yield when processing limestone is nearly 50%! An ideal machine for producing fine aggregates (dust/powder) Full technical documentation and a certificate of origin are provided with the machine We also offer the widest range of spare parts in Poland for this type of machine (available in our other listings) as well as comprehensive post-warranty service!

Condition: used, Used vertical, mobile, stainless steel AISI 316L reactor by BOCCARD (France) with a total capacity of 577 l. Reactor has a working volume of 300 l and is designed to operate at pressures ranging from -1 to 0,5 bar and temperatures up to 110 ºC. Internal dimensions: diameter 880 mm, length of straight wall line to inspection manway 800 mm. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 35 l and is designed to operate at pressures up to 3,5 bar and temperature up to 145 ºC. The jacket is insulated and clad with stainless steel sheet. Reactor has welded dished top equipped with inspection manway, with internal diameter 350 mm. Also in the top head there is a vertically downward installed homogenizing mixer, directly driven by an electric motor with a power of 2.2 kW, 400 V, 960 rpm, 50 Hz. Reactor has welded dished bottom with central discharge outlet and manually operated valve. Machine is mounted on an integrated frame with 4 wheels and an electrical cabinet equipped with an frequency inverter. Dsdozbuhwspfx Adhjcn Specifications: Capacity: 577 L Type of Stainless: 316 Stainless Steel Internal Pressure: 0.5 bar Internal Temperature: 110°C Jacket Pressure: 3.5 bar Jacket Temperature: 145°C Legs/Lugs/Mounting Ring: Legs Weight: 620 kg

Condition: good (used), Year of construction: 2005, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2005 Product number: 05026/4 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns - 1÷4 bar Working air pressure for opening the guns - 5÷6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min Dsdpfszumvxox Adhjcn ROLLER TRANSPORTER type PRN-6.3 Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/1 Working height - 920 mm +/- 50 Roll working width -1610 mm Total width - 1700 mm Roll diameter - 53 mm Total length - 6300 Movement speed - 20 m / min Weight - 320 kg Power supply - 400V 50Hz 6 bar TRANSPORTER PPR1050 Producer: CEFLA Type: PPR 1050+ TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter with a length of 1050 mm and a working width of 1250 mm with two speed ranges: low from 1.7-11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min (for the time of loading into the dryer carousel). Main engine power 1.72 kW. TRANSPORTER TRC2000 Producer: CEFLA Type: TRC 2000/125 Year of production: 2005 Product number: 05026/1 Transporter with a length of 2000 mm and a working width of 1250 mm. The transporter is driven by a 0.25 kW engine and reaches a speed of 1.7-10.7 m / min. CEFLA OVEN (drying room) Producer: CEFLA Year of production: 2005 Machine for the complete or partial drying of paint products that are applied to the parts to be treated, such as linear panels of all kinds. Vertical two-zone platform oven with warm air drying. Evaporation fan flow - 2x8000 m3 / h Drying fan flow - 8000 m3 / h Installed thermal power - 130,000 Kcal / h Total installed power - 17 kW Compressed air consumption - 92 Nl / min Platform length - 3500 mm Overall dimensions - 5192x4120x4524 mm TRANSPORTER TRC3500 Producer: CEFLA Type: TRC 3500 / 2V / 125 Year of production: 2005 Product number: 05026/16 A conveyor with a length of 3500 mm and a working width of 1250 mm with two speed ranges: low from 1.7 m / min and high up to 10.7 m / min - for the time of unloading from the carousel dryer. Main engine power 2.2 kW.

Condition: used, Year of construction: 1989, functionality: fully functional, pressure: 13 bar, Used steam generator, fully equipped and housed in a container. Type: DF 1500 (Year of manufacture 1989) Dcodpfx Aoyx U Igodhon Burner: Weißhaupt (capable of operating on oil or gas; currently equipped for oil) New water treatment system installed in 2024 Fully installed within the container Price is net Location: Poland Container built in 2004. Please do not hesitate to contact us if you have any questions.

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 6 bar, total height: 1,270 mm, total width: 1,500 mm, pressure: 6 bar, type of input current: AC, empty load weight: 300 kg, input voltage: 230 V, heating capacity: 9 kW (12.24 HP), water tank capacity: 300 l, rotary table diameter: 1,000 mm, table load: 300 kg, table width: 1,000 mm, The ROT1000 rotary basket washer is a combination of modern technology and precision workmanship at every stage of the washer's development - this is, in short, the definition of an innovative design that will facilitate the process of washing large-size parts. The rich equipment of the device will provide us with high efficiency, economy and reliability at the workplace. A motor-driven rotary basket and spray nozzles increase the efficiency of the washing process. Parts undergoing the process are placed on a circular basket that rotates around its own vertical axis. The fully automatic control panel controls the work of the washer. STANDARD EQUIPMENT OF THE WASHER: - Sensor for disconnection of the closing lid when opening it during the washing process, - Liquid level sensor in the tank, protecting against dry operation, - Liquid temperature sensor, - One adjustable, stainless steel spray arm from the renowned spraying company System - Mechanically rotating basket, Dodpfxeq I N S Ho Adhjcn - Dual filtration, - Coarse insoluble impurities filter (1mm mesh filter), - Drain valve

Condition: refurbished (used), Year of construction: 2022, POLY CLIP FCA 100 - 2022 year POLY CLIP FCA 120 - 2018 year Dcjdpfezi Ai Dex Adhen POLY CLIP 160 - 2015 year

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: A092469, Complete used Marel 24-station fish filleting and trimming Flowline with integrated OptiWeigher. The system is designed for manual fish filleting and trimming with product transport, operator workstations and production-data collection. When operated with the appropriate Marel Innova configuration, the Flowline can be used to monitor key production parameters including: - throughput, - yield, - operator performance, - production lots, - traceability, - real-time production data, - historical production results. Main equipment: - Marel 24-station Flowline - 24 operator positions Dodpfxsz H Tyfj Adhocn - 24 manual work platforms - operator seats - product bins - secondary product / by-product bins - knife holders - water system - stainless-steel construction - Intralox PP conveyor belts - OptiWeigher - Flowline control cabinets OptiWeigher specification - Type: dwu 1900/2*225 - Year: 2012 - weighing accuracy: 2 g - belt width: 225 mm - variable-speed conveyor - nominal speed: 1.3 m/s - 3 × 400 V + N - software: A571 Flowline Flowline - Year: 2012 - base-part serial no.: A092469 - 24 stations - Intralox Series 1600 belts - stainless-steel food-processing design. Suitable for cod, haddock, pollock and other whitefish processing. The system is particularly suitable for processors who want not only a manual filleting/trimming line, but also measurable production performance and yield control. Possible integration with Marel Innova, subject to verification of the installed software licences, controller configuration and interface status. Technical documentation available. Inspection possible by appointment. Price on request.

Condition: excellent (used), Year of construction: 1999, Year: 1999 - technically efficient, ready to work – after full service - for the upper and lower hinge - centering the element - SPS control Dcjdpoz Hk Hvefx Adhon

Condition: used, Year of construction: 2007, KIWA JAPAN KH-45 Horizontal center 4 axes Fanuc 31i control Year 2007 XYZ -640 x 610 x 680 B-360 degrees Table 400 x400 Dcedpfx Ajvnzgisdhjn Magazine 60 tools Taper BT40 Spindle 12000 rpm Spindle motor 22.4 kw Machine dimensions 4540 × 2400 x 2584 length width height Weight 9200 kg

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning length: 3,000 mm, feed length X-axis: 420 mm, quill travel distance: 235 mm, total length: 4,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 4,300 kg, disc diameter: 450 mm, faceplate diameter: 450 mm, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH Transport can be arranged directly to the customer anywhere in Europe. Transport cost is quoted individually according to the delivery postcode and destination. MTP CQ6280 HEAVY-DUTY UNIVERSAL LATHE 800 × 3000 – Ø105 mm SPINDLE BORE – 7.5 kW – 3-AXIS DRO Metal Technics Polska – Professional Metalworking Machinery The MTP CQ6280 800 × 3000 is a heavy-duty universal lathe designed for demanding professional and industrial machining applications. Its rigid construction, large working capacity and Ø105 mm spindle bore make it suitable for machining large shafts, cylindrical components, tapers, stepped parts and internal or external threads. With an 800 mm swing over bed, 3000 mm turning length, 400 mm wide bed and a machine weight of approximately 4300 kg, the CQ6280 provides the stability required for heavy workshop and production use. The machine is equipped with a 7.5 kW main motor and 3-axis Digital Readout (DRO) for accurate and convenient machining. TECHNICAL DATA • Maximum turning length: 3000 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm • Gap length: 330 mm • Bed width: 400 mm • X-axis travel: 420 mm Djdpfx Adsyz Ubxjhocn • Z-axis travel: 230 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm, 16 speeds • Spindle bore: Ø105 mm • Spindle nose / mounting: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev • Z-axis feed: 0.044–1.48 mm/rev • Tailstock quill diameter: Ø90 mm • Tailstock quill travel: 235 mm • Tailstock taper: MT5 • Tailstock cross adjustment: 11 mm • Metric threads: 0.45–120 mm • Module threads: 0.25–60 mm • Diametral Pitch threads: 0.88–160 DP • Whitworth threads: 7/16–80 TPI • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions: 4740 × 1140 × 1910 mm • Weight: approx. 4300 kg STANDARD EQUIPMENT • 3-axis Digital Readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Drive plate • Fixed steady rest up to Ø250 mm • Travelling steady rest • Coolant system • Chuck guard • Fixed splash guard • Reduction sleeves • Dead centre • Tool set APPLICATIONS Suitable for: • large shafts and cylindrical components, • tapers and stepped workpieces, • internal and external threading, • repair and maintenance work, • heavy workshop machining, • general industrial production. SALES, DELIVERY & SUPPORT We provide professional technical advice before purchase, as well as warranty and post-warranty support. Professional transport can be organised throughout Poland and the whole of Europe directly to the customer’s destination. Please provide your delivery postcode and city for an individual transport quotation.