Used Pneumatic Stapler for sale (8,187)

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm Hsdpfx Aotrpiiskisw - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Nagel Multinak S Year 1994 - Serial-No. 14069 Hjdo Af Alzepfx Akiow Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Manuelle Heftmaschine / Manual Stapler Nagel ENAK 50 Serial-No. 7005 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Hjdo Af Ag Espfx Akiew On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Mäder DLP 1700 HV Direct-acting pneumatic press Direct-acting pneumatic presses are used wherever a constant pressing force is required over a longer stroke or a large insertion depth is necessary, for example, when pressing in pins, bushings, and ball bearings or during forming operations. DLP 1700 HV Direct-acting pneumatic press Pressing force at 6 bar: 17 kN Working stroke: H mm: 40/60/80 You can find more new and used items in our shop! Hedpsd Tam Nefx Akijw International shipping costs available upon request!

Condition: used, Year of construction: 1951, Ram weight: 100kg. Including anvil block, anvil, standard dies and motor. Total weight: approx. 3400kg including anvil block. The machine was purchased in working condition in 2019 and has not been operated since. The hammer has very good compression and is in good condition. Low operating hours, no continuous operation. The sliding surfaces of the ram are greased. Documentation available. An on-site inspection is possible. Hjdpfx Aksz R A Iueijw

Condition: used, Cabbage corer on a stainless steel stand This cabbage corer removes the hard core from a cabbage. The cabbage goes into the opening at the top, the toothed coring head comes down pneumatically and turns the core out; the removed core drops out underneath. Hodpfxjz Ndkyj Akisw The machine is built entirely in stainless steel and stands on four legs with adjustable feet. The pneumatics sit in a box on the side. There is no type plate, so make and year are not known. Trying it with your own product can be arranged. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Cabbage corer Drive: Pneumatic Controls: Pneumatic box with valves Construction: Stainless steel, on legs with adjustable feet

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Hedpfxjxiza Ue Akiow

Condition: used, Mixing kettle that tilts for emptying This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor. It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. Hsdpfx Asz Nc S Nskiow More photos and full specifications: / Type: Tilting mixing kettle Lid: Pneumatically locked Discharge: By tilting the kettle Controls: Separate control cabinet with push buttons and emergency stop Construction: Stainless steel

Condition: excellent (used), For sale is a complete, industrial pneumatic press in a workshop configuration, ideal for punching, stamping, pressing, or other assembly processes. The set includes: • a pneumatic column press with a robust, steel construction • a control valve, actuator, and pneumatic distribution system • an integrated control panel with an emergency stop switch • a steel work table with adjustable side guides Hodez Sawdjpfx Akiew • a power cabinet, distribution board, and cable routing • a table on wheels with a transport brake Drive: pneumatic power supply Control: solenoid valves, start/stop buttons Power supply: 230 V (electrical system integrated into the base) Technical condition: very good. Used, fully functional set ready for operation in a workshop. Industrial design, not for amateur use.

Condition: like new (used), functionality: fully functional, Year of construction: 2010, total length: 270 mm, total width: 270 mm, total height: 300 mm, Equipment: CE marking, Pneumatic punching machine for aluminium profiles Hedpfoxyyc Ajx Akiew Has been a part of an Elumatic production line and purchased directly from Elumatic. Manufacturer: Santas Mekaniska Model: UP Serial number: SA2010 Year: 2010 Information A pneumatic punching machine designed for fast and precise hole punching in aluminium profiles. Its air-powered operation provides efficient and consistent results for professional production and assembly applications. Dimensions Width: 270 mm Height: 300 mm Seller’s Comments Fully functional Used in a production line for aluminum profiles

Condition: excellent (used), Year of construction: 2012, Pressing force 28 kN Min./max. operating pressure 3 / 6 bar Stroke 12 mm Electrical connection 220 Volt Overhang 130 mm Table 200 x 150 mm Hsdpfx Akez Hv U Soisw

Condition: new, Year of construction: 2025, Heavy duty industrial trailer with payload 16000 Kg at 6 Km/h dimensions 5000 x 2000 x 540 mm drawbar according to DIN 40 mm drawbar eye All wheel steering Hsdpfx Aksptbiroisw drums 425 x 150 - 305 twin on steel rims with conical bearing on both sides transport floor spruce 30 mm four welding eyes on each long side for securing the load

Condition: excellent (used), CATALOGUE NUMBER 7992 TECHNICAL DATA - Loading areas: 2 - Manually adjustable side clamps: 2 x 6 pcs - Pneumatic vertical clamps: 2 x 6 pcs - Max. length of glued elements: 3600 mm - Max. height of glued elements: 1500 mm - Max. thickness of glued elements: 130 mm - Guides for gluing thin elements - Dimensions (L/W/H): 4300x1570x2110 mm - Weight: 1400 kg Hodpfx Aj Af I U Eskiow ADVANTAGES – Two work areas – Gluing length: 3600 mm – Pneumatic cylinders – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, very good condition Net price: 14900 PLN Net price: 3465 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, functionality: unexamined, machine/vehicle number: SAF 30NC, Used AMG-PESCH SAF 30NC pneumatic actuator with valve Manufacturer: AMG-PESCH GmbH Hjdpfxoxp H Evo Akiow Model: SAF 30NC With Festo vsnc-fc-m52-md-n14-f8 “solenoid valve” For sale per set

Condition: used, Doppelkopfheftmaschine für Broschüren - Blocks - Twin-headed Stapler for Booklets - Pads Nagel Multinak Year 1980 - Serial-No. 6236/1 Hsdpfx Aj Af Am Sekiew Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, SCA pneumatically driven piston pump Max. temperature: 100 °C Hjdpfx Ajwxw R Rjkiow Material pressure: 350 bar Dimensions: H x W x D 2400 x 1200 x 800 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2002, Machine: Mayer Pressgabeln für Stapler Hjdpjz Suvgefx Akisw

Condition: good (used), Year of construction: 1969, Pneumatic adhesive press, Maximum pressure: 10 bar, Adhesive bar with heating, Adhesive surface: 550 x 40 mm, Hodod Dxqbepfx Akijw Infinitely adjustable temperature setting for the lower and upper adhesive bars from 0 to 300 degrees Celsius, Infinitely adjustable adhesive dwell time, Drive power: 5 kW, 380 volts, 50 Hz, Two-hand operation with SIEMENS control. Pressure build-up via articulated lever, Maximum opening distance: approx. 30 mm.

Condition: excellent (used), Year of construction: 1996, CUTTING LENGTH 3050MM POWER BACK GAUGE 1000MM PNEUMATIC SHEET SUPPORTS Hedpfxj Af Iy Ae Akiew SIDE GUAGE 1.0 METRE SERIAL NUMBER HOLD DOWN HYDRAULIC BLADE GAP ADJUSTMENT STANDARD VARIABLE RAKE STANDARD SHADOW LINE LIGHT STANDARD CENTRALISED LUBRICATION STANDARD SHADOW LINE LIGHT STANDARD STROKE COUNTER STANDARD ADJUSTABLE STROKE STANDARD MAX THICKNESS MS 6 MM MS MAX THICKNESS STAINLESS 4 MM SS

Condition: as good as new (ex-display), Year of construction: 2025, Heavy-duty transport trailer with a payload of 8 tons on the loading platform. Dimensions: 6000 x 2400 x 900 mm, with a turntable steering system on the front axle and a fixed trailing axle. Tires: pneumatic, 7.00-15. Overrun brake and parking brake on the steering axle. Loading platform: Wood, 30 mm thick, or for an additional charge of €220.00, 18 mm screen-printed wood. On the front, facing the direction of travel, a 1000 mm high front wall with a mesh size of 40 mm. Lashing points on the longitudinal sides for securing the load. Optionally available with a lighting system for an additional charge of €980.00, with a spiral cable as a connecting cable. Paint finish in RAL 2000; other colors available upon request for new production. Hjdpokzhqxofx Akiow

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 00521120, MACHINE SPECIFICATION Maximum cutting thickness 1.5mm Maximum Cutting length 1030mm Hsdpfx Aszia Nzskiow Shear angle 3 degrees Working pressure 7 to 10 bar Dimensions (L x W x H) 1380mm x 1210mm x 1300mm Approximate weight 195Kg MACHINE EQUIPPED WITH Squaring arm Rear guarding Trailing footswitch

Condition: used, SCA Pneumatically Driven Piston Pump SCA PPK57-200P8-R-E Max. temperature: 100 °C Material pressure: 350 bar Capacity: 200 l Dimensions: 1050 x 650 x 2000 mm You can find more items – new and used – in our shop! International shipping costs available upon request! Hsdpfxjwxw U Ao Akijw

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, Container conveyor scale, electronic, pneumatic, bulk material scale, 60 tons/hour. Calibratable, year of manufacture 2025 (all electrical and pneumatic components have been completely overhauled). For fine-grained bulk materials such as grain, high measuring accuracy. Ideal for goods receiving and loading. High throughput capacity, dust-proof frame construction. Purchased to replace a mechanical conveyor scale, but not installed due to the short-term shutdown of operations. Pre-hopper with level indicator also available. Hjdpfjzy Rcyex Akisw

Condition: new, empty load weight: 4,000 kg, maximum load weight: 30,000 kg, overall weight: 34,000 kg, permissible axle load (axle 2): 34,000 kg, total length: 5,000 mm, total width: 2,000 mm, Year of construction: 2026, front tire size: 559, rear tire size: 559, load capacity: 30,000 kg, Heavy-duty transport trailer Payload: 30,000 kg on 60% of the loading area Dimensions: 5000 x 2000 x approx. 850 mm Tires: 559 x 300 solid tires Steering: Front axle with turntable Trailing axle: Rigid Loading platform: 40 mm thick spruce, recessed and screwed in Hjdoiwlw Rjpfx Akisw Paint: RAL 2000 Drawbar with 40 mm tow hitch, safety mechanism, and height adjustment Double-acting support leg Welded-on brackets: 4 pieces per longitudinal side for securing the load

Condition: excellent (used), Gericke PTA50 Pneumatic conveying system Stainless, Mobile pneumatic conveying and dosing system used in the food, chemical and pharma industries, working pressure 3.9Bar, volume 50L, with butterfly valve and actuator Hodpfxsy Tbfne Akiow