Used Plate Punch for sale (13,852)

Condition: good (used), Year of construction: 2007, Used punching machine by Sahinler Type HP-115 Capacity 115 tons Includes numerous punching tools Fgedpez Il Svjfx Aivsh

Condition: used, functionality: fully functional, Year of construction: 1990, degree of automation: manual, punching force: 20 t, Equipment: emergency stop, foot remote control, Well-maintained machine in good working order, but without any additional tools. Fjdpfxjz I Tqgo Aivjgh

Condition: good (used), Year of construction: 2019, Schuler BEUTLER press Type: MC 4000 Year of manufacture: 2017 Pressing force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Installed height: 750 mm Table area: 3,000 x 1,400 mm Ram area: 3,000 x 1,300 mm Press weight: 72,000 kg Fgodpfoz Hbq Eox Aivjh including GSW Schwabe strip feed line Strip width: 80 - 500 mm Strip thickness: 0.8 - 4.0 mm Coil capacity: 5,000 kg

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 7 kg, total length: 252 mm, total width: 183 mm, total height: 191 mm, motor manufacturer: GAST, power: 0.37 kW (0.50 HP), volume flow: 62 m³/h, pressure (max.): 12.07 bar, noise level: 70 dB, OIL-FREE rocking piston compressor - NEW - ORIGINAL PACKAGING - 13 units available NEW & SEALED – GAST 71R545-P545-D402X Oil-Free Rocking Piston Compressor | 0.5 HP | 12 bar | 230 V | Quiet 70 dB(A) | Made in USA - Immediate shipment possible Brand New, Factory-Sealed GAST Compressor – Ready to Ship Looking for a reliable, clean-air compressor without waiting weeks for delivery? This GAST 71R545-P545-D402X is brand new, unused and in its original packaging. Why professionals choose this model • Truly oil-free: clean, contaminant-free compressed air for medical, dental, laboratory and food-related applications • Up to 12.07 bar (175 psi) from a compact twin-cylinder rocking piston design • Whisper-quiet at just 70 dB(A) with minimal vibration • Light and compact: only 7 kg, 252 × 183 × 191 mm, easy to integrate into OEM and system builds • Corrosion-resistant construction for long service life • CE marked, manufactured in the USA by GAST, a globally trusted brand • Single-phase, 208–240 V AC, 50/60 Hz Technical data at a glance 0.5 HP | 62 l/min open flow (50 Hz) | 34 l/min at max. pressure (50 Hz) | 2.8 A (50 Hz) | mounting 203 × 89 mm Why buy now Fgjdpfxoz Ipube Aivsh • New and unused, so no hidden wear and no guesswork • Original manufacturer packaging • Spare unit or replacement ready for immediate use, so you avoid costly downtime • Fast, insured worldwide shipping, with invoice and VAT breakdown on request • Price: 1075 Euro net (list price 2166 Euro), negotiable for quick decisions or multiple units. 13 units available Send us your inquiry today, and we will reply within 24 hours with a binding offer.

Year of construction: 2004, condition: used, Colour: Yellow Empty weight: 545 kg Dimensions (LxBxH): 189 x 66 x 107 cm Fodez N Hg Sopfx Aivegh Availability: in stock

Year of construction: 2006, condition: excellent (used), functionality: fully functional, 1 used cutting and punching machine Manufacturer: BOGRAMA AG, Switzerland Type: BSM 450/220/15/Plus Year of manufacture: 2006 Machine No.: 232/06 Technical data / Equipment: - Cutting and punching machine - Working width up to approx. 450 mm - Product width up to approx. 220 mm - For cutting, punching and perforating - Punching thickness with Servo-Plus version up to max. 4 mm - Pneumatic connection: max. 6 bar - Robust design for professional use in post-press processing The technical specifications are based on the BOGRAMA data for this machine series; individual values may vary depending on the equipment of the specific machine. Fgodpfx Ajz I Uf Sjivsh

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Fgsdpjz Ixh Rsfx Aivoh Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: used, First registration: 28.05.2015, VIN: VF11FL11852823229, Power: 103 kW, Drive: Diesel, Engine displacement: 1598 ccm, Mileage: 107,200 km, Next MOT: 09/2027, long-wheelbase version, manual transmission, multimedia system, Bluetooth. Fsdpfjz Nhudjx Aivjgh

Condition: excellent (used), Year of construction: 1990, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control ELGO TYP 85 oil volume 120 ltr. engine output 13.0 kW weight 6300 kg. range L-W-H 3950 x 1950 x 1680 mm Fgedpsz N Hxnofx Aivoh very well-maintained condition (!!) Equipment: - Electro-hydraulic guillotine shear with guided blade movement - ELGO NC "Type 85" control unit * Front control panel, swiveling (front left) - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - NC motorized backgauge * With recirculating ball screws - 1x side gauge 2,000 mm ... with T-slot + mm scale - 2x front support arms 1,000 mm ... with mm scale - Recessed grips in the support table - Front finger guard - 1x movable foot pedal - Operating manual

Condition: used, This listing is for the Biotek ELx808 Plate reader The unit is in full working condition and is ready for immediate use Fedpfx Aijxhftvjvegh The BioTek ELx808 is a multi-channel absorbance microplate reader designed for high-precision optical density measurements in 96-well format microplates. Functioning essentially as a microplate-format spectrophotometer, the ELx808 measures light intensity as a function of wavelength—allowing for precise quantification in applications such as ELISA, endotoxin testing, enzyme kinetics, and microbial growth. This model is suitable for both research and development as well as diagnostic use, and is frequently employed across multiple disciplines including biology, chemistry, and nanotechnology. However, unlike some other microplate readers on the market, the ELx808 is specifically engineered for 96-well plates only and does not accommodate a broad range of labware.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2015101, Size 60 x 76 cm, die-cutting machine with automatic registration and camera system. Fgjdpszxf Hdjfx Aivoh

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek work height max. 840 mm down holder 14 Stück Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Fedpfoxab Rujx Aivogh Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: good (used), Year of construction: 2003, sheet width 2050 mm Fgodoz N Hxhspfx Aivoh plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Year of construction: 2002, condition: excellent (used), functionality: fully functional, BOGRAMA Punching Machine – Multi BSM 450/220/15 - Manufacturer: BOGRAMA AG, Switzerland - Type: BSM 450/220/15 - Year of Manufacture: 2002 - Machine No.: 038/02 - Working Width: max. 450 mm - Performance: up to approx. 12,500 cycles/hour (depending on material and format) - Punching/Cutting Thickness: - Hole perforation: up to approx. 2 mm - Binder hole: up to approx. 5 mm - Cutting: up to approx. 5 mm - Strip steel cutting: material-dependent - Sheet Alignment: pneumatic front and side guides Fsdpfx Aijz I Ug Ajvjgh - Cycle Control: via photocell - Compressed Air Connection: 6 bar - Electrical Connection: 3 × 400 V / N / PE, 50/60 Hz - Fuse: 32 A - Applications: Punching, cutting, perforating, and hole punching

Condition: used, Year of construction: 2004, total length: 4,400 mm, total width: 1,300 mm, total height: 1,200 mm, Colour: Grey Empty weight: 2.500 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20440160 Fodoyym Tdopfx Aivjgh - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 4 - Max. prebending thickness [mm]: 3.5 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 170 - Bottom roll diameter [mm]: 160 - Options: Digital readout, Cone rolling - Transport dimensions: 4400mm x 1300mm x 1200mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2016, operating hours: 2,615 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,108 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) New TH 7 laser (August 2022) with only 2615 laser hours 2400 dpi Z-speed Total number of exposed printing plates: 395,443 pieces Minimum size: 483 x 394 mm Fgsdpfjytawnex Aivoh Maximum size: 1600 x 2108 mm Material flow from left to right, Print Console enabled for all RIP software, Dell PowerEdge T330 server.

Condition: used, machine/vehicle number: 5240, Housing for 101 plates. Delivery supply: with 2 end plates of stainless steel. Intermediate plates are not included Plates maximum: 100 Plate formats: 400x400 Fgjdpfjz N Tbpjx Aivoh Platefilter features: Manual spindl Dimension  ca. 300x60x100 cm dimensio between the first plate to the spindle ca. 170cm

Condition: used, Year of construction: 2019, sheet width 6080 mm plate thickness 6.0 mm rear stop 1000 mm cutting angle 0.5 - 2.0 ° down holder 29 Stk no. of strokes ca. 10 Hub/min total power requirement 22.0 kW dimensions of the machine ca. 7300 x 2150 x 2750 mm weight 25500 kg Current list price: approx. 150.000 euros Features: - Electro-hydraulic, slide-guided sheet metal shear - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Electrically driven backgauge with ball screws - Manual central lubrication Fedjzvq Etjpfx Aivjgh - Cut line illumination - Ball bearings in the table - Fold-up finger guard, 1.000 mm - Side stop with T-slots, tilting stop, and scale - 5 support arms with T-slots - Photoelectric sensors on the rear of the machine - 1 freely movable foot switch Includes optional equipment: - Pneumatic sheet metal holding device

Condition: good (used), Year of construction: 2007, Well-maintained Euromac CNC punching and nibbling machine Type MTX Index 5 5-station tool changer with auto-indexing Stroke length 1250 mm Capacity 30 tons Fedpjzz N Taofx Aivogh Includes 2 multi-tools and numerous tools (see photos)

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Clear text display Press force monitoring Wire straightening device Bosch stripping devices Mounting bracket and brush motor with integrated tool W32/1-32 Soundproof cabin Spool of CU wire with stamped parts Control cabinet Drive power: 7.5 kW Speed (min. - max.): 40-250 rpm Press force / bending slide: 80 kN Press force / punching unit: 200 kN Fgsdpog T S Ttofx Aiveh Feed length: 2050 mm Strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm Item condition: very good Manufacturer's description, deviations possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Wenzel roughness and contour measuring station for crankshafts Measuring plate made of hard rock Length: 3670 mm Fsdpfxeihillo Aivogh Width: 850 mm Flatness tolerance according to DIN 876/1 Target value: 48 µm Actual value: 32 µm Identification No.: 14280 JFA roll-off cradles You can find more measuring plates in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 1983, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Fgjdpjz Iy Nvefx Aiveh Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: good (used), Schuler PE4s 50/800 high-speed press Manufacturer: Schuler Type: PE4s 50/800 61/21 600/3 Press force: 50 tons Stroke: 800 mm Fedpfxogryc Ne Aivsgh Strokes per minute: 125-300 Ram stroke: 40 mm Kohler unwinding reel 500.1 M More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0165091297780, Offer 26265 Hydraulic flat bar and round bar shear with notching device and hole punch Fgjdpfx Aisz Ndxuovsh Technical data: - Flat bar shear, cuts up to 240 x 13 mm - Angle bar shear - Cuts L-shaped steel at 90° up to 100 x 10 mm - Cuts L-shaped steel at 45° up to 70 x 8 mm - Round bar shear - Cuts round steel up to 35 mm - Cuts square steel up to 32 mm - Notching device with square notching device - Hole punch - Punching force 600 kN - Reach 220 mm - Punches holes in steel up to 30 mm Ø in 15 mm - Punches holes in steel up to 24 mm Ø in 20 mm - Various punching tools and dies - Electrical equipment – foot pedal - Drive 400 V / 4 kW - Space requirement approx. W 540 x H 1800 x D 920 mm - Weight approx. 1200 kg

Condition: good (used), Bohner Griddle Plate Tabletop Unit BGM 80 A Multi-Grill 8 kW Multifunctional for frying, cooking, and reheating food The multi-grill is equipped with a special grill surface that enables the preparation of all kinds of dishes directly on the grill plate, such as fish, meat, vegetables, rice and pasta dishes, as well as potato dishes and desserts. Due to its larger capacity, it is also ideally suited for dishes with sauce, such as goulash. Dimensions: W x D x H 800 x 600 x 200 mm Equipment: 2 heating zones Dimensions of the grill surface: W x D 740 x 540 mm Connection value: 400 V / 8.0 kW Fuse rating: 16 Amps Fgedpexuqnrefx Aivsh Weight: 40 kg Housing made entirely of stainless steel Housing height: 170 mm Device feet: 30 mm high, adjustable up to a maximum of 75 mm Steel plate, specially hardened Hard chrome-plated Energy-saving technology Heating can be continuously adjusted via a thermostat Optimal thermal conductivity Large, full-surface heat storage Warm-keeping zone on the operator side, 120 mm wide Grease drain/residue collection: centered on the operator side, 130 x 30 mm More items - new and used - can be found in our shop! International shipping costs available upon request!