Used Ph Meters for sale (4,939)

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: Kedpfezvq Rcsx Adqjdr • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: good (used), total length: 60,000 mm, total height: 2,500 mm, 60 linear meters of SSI Schäfer R3000 shelving system, including shelf inserts 📋 Consisting of: • 47 x pre-assembled frames / approx. 250cm high / 80cm deep / new • 184 x grid shelves / 128cm long / 80cm deep / 200 kg load capacity / used • 16 x cross braces Kodpfxery Ucvs Adqodr • Color: galvanized, gray • Condition: very good, see photos 💰 Price €7,290.00 net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, Europe-wide • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10129 We constantly have over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description text: Are you looking to buy high-quality storage shelving? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer truckloads of goods processed weekly for maximum selection 📦 OUR RANGE (BUY AFFORDABLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete all-round package: 1. Flat-rate purchase: purchase of merchandise, equipment & complete inventory, including complete clearing. 2. Commission auction: carrying out auctions on behalf of the client. Our full service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and complete clearing. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2007, operating hours: 7,010 h, Equipment: all wheel drive, MAKE: AICHI ARBEITSBUHNE TYPE: SR21A YEAR: 2007 CE MARKED: YES OPERATING HOURS: 7010 HOURS TIRES/UNDERCARRIAGE: 30% POWER: 42KW ENGINE: ISUZU CC-4JG1 WEIGHT: 14900KG Kdsdjzt Hahopfx Adqjr OPTIONS: 14900 KG WEIGHT ISUZU ENGINE LIFTING CAPACITY 227KG 23-METER WORKING HEIGHT 21-METER LIFTING HEIGHT IN GOOD WORKING CONDITION

Condition: good (used), functionality: fully functional, power: 75 kW (101.97 HP), gearing type: automatic, fuel type: diesel, empty load weight: 10,800 kg, lifting power: 3,500 kg/m, lifting height: 13,000 mm, Year of construction: 2007, operating hours: 4,870 h, Equipment: all wheel drive, cabin, onboard computer, pallet forks, 2 units JLG 3513 Telehandlers from year 2007 Machine 1: JLG 3513 Year: 2007 Ksdpfxey Dznko Adqjdr According to hour meter: 4,871 hours 13 meters 3.5 tons Machine 2: JLG 3513 Year: 2007 According to hour meter: 4,799 hours 13 meters 3.5 tons Both machines with identical equipment: - Perkins engine - Powershift transmission - incl. forks - mechanical quick coupler - additional hydraulic circuit to fork carrier - hydraulic outriggers - hydraulic self-leveling - cab with heating - lighting system with indicators - joystick controls - all-wheel drive - 3 steering modes - immediately operational - good tires - incl. CE Sale price: €23,900 net per machine! Affordable delivery available! Also available: NEW bucket or NEW work platform at extra cost!

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: C3030, type of input current: three-phase, total width: 1,900 mm, total length: 4,200 mm, input voltage: 400 V, input current: 50 A, feed length X-axis: 1,700 mm, feed length Y-axis: 1,700 mm, feed length Z-axis: 300 mm, working width: 1,700 mm, total height: 850 mm, repeat accuracy: 0.1 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 1 m/min, cutting width (max.): 1,700 mm, cutting height (max.): 80 mm, compressed air connection: 6 bar, Complete Textile Cutting & Spreading Equipment Line – KURIS, ZSK & MAYER – Automatic Cutter, Spreading Machines, Presses Professional textile production equipment available for sale, including automatic cutting systems, spreading machines, embroidery equipment, industrial presses, and accessories. All machines were used in industrial garment production and are available for inspection. Also available more than 200 sewing,ironing machines (Juki, Durkop Adler, Veit) Contact for more info. Location: Ruse, Bulgaria Delivery terms: EXW (Incoterms 2020) All prices are net prices (excluding VAT, dismantling, loading, and transport). Cutting Equipment 1 × KURIS C3030 Automatic Cutter KURIS automatic CNC textile cutting system. Like new condtion always serviced with original parts installed October 2019 Main Specifications Working width: 1700 mm Cutting height: up to 80 mm Automatic servo cutting system Vacuum table Industrial CNC control Suitable for textile and technical fabrics Set Price: EUR 45,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter KURIS band knife machine Set Price: EUR 9,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 8,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Spreading Tables: 1 × 10-meter spreading table Price: EUR 500 1 × 8-meter spreading table Price: EUR 500 Plaid Fabric Cutting Table with Awl Special table for precise plaid/check fabric alignment and cutting. Price: EUR 2,500 Embroidery Equipment 1 × ZSK 10-Head Embroidery Machine Ksdpfxoy Tp Sie Adqodr Industrial multi-head embroidery machine by ZSK. Price: EUR 5,000 Pressing Equipment 1 × MAYER RPS-M 1000 Press Mayer industrial pressing machine. Price: EUR 8,000 1 × MAYER AHV-BM 1370 Press Price: EUR 4,000 1 × MAYER APM-1150 Press Price:EUR 4,000 Additional Information feel free to contact me (Viber,Whatsapp) Machines can be inspected under power Professional dismantling available upon agreement Loading assistance available Transport can be arranged separately Suitable for garment factories, textile manufacturers, upholstery production, and industrial textile processing All prices are net prices (excluding VAT, dismantling, loading, and transport) Contact: G. Jordanov Location: Ruse,Bulgaria

Condition: like new (used), Year of construction: 2019, operating hours: 399 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 48 mm, clearance between the columns: 650 mm, displacement volume: 318 cm³, injection pressure: 1,900 bar, mold height (min.): 250 mm, ejector force: 35,000 N, ejector stroke: 150 mm, opening stroke: 550 mm, plate length: 900 mm, plate width: 900 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S-220iA – fully electric injection moulding machine, year 2019 Very lightly used precision injection moulding machine with only 399 operating hours. The FANUC ROBOSHOT Alpha S-220iA combines high repeatability, dynamic movements and energy-efficient production. Suitable for demanding technical plastic parts and reliable series production. Technical data: - Clamping force: 2,200 kN (220 t) - Double-toggle clamping mechanism - Tie-bar spacing: 650 × 650 mm - Platen size: 900 × 900 mm - Mould height: 250–750 mm, extended version - Clamping stroke: 550 mm - Ejector stroke: 150 mm - Maximum ejector force: 35 kN Kodpfx Ajznd Dyjdqodr - Screw diameter: 48 mm - Shot volume: 318 cm³ - Maximum injection speed: 200 mm/s - Maximum injection pressure: 1,900 bar - Locating ring: Ø 160 mm - Fully electric drive Control and equipment: - FANUC 31i-B CNC control - 15-inch LCD touchscreen - AI mould and ejector protection - Precision metering and pressure-profile functions - Automatic mould-height adjustment - Energy-consumption measurement - Euromap 67 robot interface - Three independent air valves - Cascade control for up to eight valves - USB and memory-card output - Four-circuit flow meter The machine is in like-new condition and fully operational. Inspection is available by appointment. Price, delivery time and further information are available on request.

Condition: excellent (used), lifting height: 2,750 mm, Year of construction: 2017, Empty weight: 480 kg Lifting capacity: 208 kg Dimensions of cargo space: 137 x 74 x 128 cm CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: DK Please contact Vink Machinery for more information Smartlift Compact SL 208 Vacuum Lifter * 2017 * Battery powered * 2.75 meter working height Kjdezvpvdopfx Adqedr * 0.85 meter horizontal reach * 208 kg lifting capacity * 480 kg own weight

Condition: good (used), total length: 120,000 mm, 120 linear meters of used Schäfer R3000 shelving system 📋 Consists of: • 93 x pre-assembled frames / approx. 250cm high / 60cm deep / new • 460 x shelves / 128cm long / 60cm deep / 100 kg load capacity / used • 30 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price €11,490 net, excluding VAT • Quantity discounts: available upon request • Shipping costs: available upon request, Europe-wide • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10051 Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & used and new heavy-duty racking Description: Are you looking for high-quality storage racking for sale? With around 100 of its own employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage mezzanines & steel construction mezzanines immediately available • 30–50 semi-trailer trucks of merchandise turnover weekly for maximum selection Kedpjq Dkl Eefx Adqodr 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racking or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round package: 1. Lump-sum purchase: purchase of merchandise, equipment & complete inventory including thorough cleaning. 2. Commission auction: carrying out auctions on behalf of clients. Our full service with our own employees: cataloging, office preparation, inspection, merchandise delivery, logistics, dismantling and thorough cleaning. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, machine/vehicle number: LU19H00399, input voltage: 400 V, type of input current: three-phase, input current: 26 A, Nordson VPUR-Slug unit. PUR adhesive melter with 5-meter hose and adapter nozzle. Fully functional. 500 operating hours. Single gear pump. Two hose connections. Additionally, includes many new consumable parts and a new 5-meter hose. Kdodpfjy Hl Nkox Adqsr

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, machine/vehicle number: RA-7535, measuring range X-axis: 1,750 mm, measuring range Y-axis: 1,750 mm, repeat accuracy: 0.04 mm, Very neat measuring arm from the brand Romer Hexagon. With a measuring range of 3500mm and an accuracy of < 0.04mm, this measuring arm in combination with PolyWorks software is a very user-friendly system that allows you to perform accurate measurements for years to come. A HP-L-8.9 3D scanner has been added to the 6-axis measuring arm, making it a complete measurement system. The PolyWorks Inspector software, including scanning, version 2019, is included. Kdsdpfx Aeu Hqfpodqjr

Condition: like new (used), functionality: fully functional, machine/vehicle number: Grundfoss CR 30-20, Grundfoss water pump, unused, but kept as a spare in the warehouse. Now it needs to be sold; the original purchase price was over 4,000. See the photos. The price is quoted excluding VAT (21%) and is for pickup in Uden. Shipping is possible; please inquire! Kedpjzuui Tofx Adqsdr CR 30-20, 27 m3 maximum flow rate / maximum pressure 2.4 bar, 24 meters, 400 volts. VADO in Uden supplies all types and sizes of pumps. Just get in touch.

Condition: excellent (used), Year of construction: 2006, 70 linear meters of SSI Schäfer Palflex pallet racking, including infill grating Used, in good condition, see pictures Year of manufacture: 2006 Height: 4 m Depth: 120 cm Field load: 12000 kg Frame: galvanized Beams: red Infill grating included! 2 pieces of grating per 2.7-meter beam length Negotiable price: €8,290 net ex works The offer includes: + 26 units of pre-assembled frames, depth 120 cm, height approx. 4 m + 100 units of beams, length 2.7 m, 1500 kg load capacity per bay with evenly distributed load + 200 units of safety locks + 100 units of galvanized infill grating for 50 levels, each 2.7 meters in beam length + 104 units of concrete anchors + Load capacity signs Ksdpfxjkx E I Ne Adqodr Goods are in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex works) Lenox Trading – Top warehouse technology & heavy-duty racking used & new Description text: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage mezzanines & steel construction mezzanines immediately available • 30–50 semi-trailer truckloads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a real all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including a complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods release, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for a galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: ready for operation (used), Year of construction: 2012, L & Z Spindle Lathe ZMM - CU 630 RD incl. Digital Display -CE marking -Digital display -Year of manufacture 2012 -Center height 315mm -Turning diameter over guides 630mm -Turning diameter over cross slide 430mm -Distance between centers 1500mm -Turning diameter with bridge removed 830mm -Spindle bore 103mm -Automatic longitudinal / facing feeds -Motorized rapid traverse in the carriage -Speed range 16 - 1250 RPM (stepless speed control) -Drive power 11Kw Kdedpezhx Hvsfx Adqor -Three-jaw chuck / ROTAX 315 incl. hard & soft jaws -Chuck guard -Tailstock -Steady rest -Multifix base with inserts -Coolant system -Work light Dimensions: L x W x H 3.5 x 1.5 x 1.7 meters / Weight 4000Kg Errors and omissions excepted.

Condition: like new (used), 40 linear meters of Nedcon pallet racking New item, see pictures! A top-quality racking system from the renowned manufacturer NEDCON - a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height: 5.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity per shelf: 3050 kg Negotiable price: €6,990 net ex warehouse Offer includes: + 15 units of pre-assembled frames, depth 110 cm, height 5.5 m + 84 units of beams, length 2.7 m, 3050 kg load capacity per shelf + 168 units of safety locking devices + 30 units of concrete anchors Load capacity signs, documentation, etc. are, of course, included. Further accessories can be found in the accessories catalog. Frames in blue RAL 5019, infill panels galvanized. Kodpfsfkgpwsx Adqedr Heights from 2 m to 7 m in stock. Field load: 12 tons, higher field loads available upon request. Beams in orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly can be arranged upon request. Other configurations available upon request. Over 2000 meters available. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, information, and prices as well as prior sale are subject to change! See our terms and conditions, all prices excluding VAT, ex warehouse.) Lenox Trading – Top storage technology & used & new heavy-duty racking Description text: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of shelving and steel platform systems immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers - we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance projects, we offer a complete all-round service: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventories including a clean sweep. 2. Commission auction: Conduct auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and clean sweep handover. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system - we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data - manufacturer: Krones - model: Volumetic (filler) / Variojet (rinser) - year of manufacture: 2001 - filling valves: 120 Kdodpsyluwtefx Adqer - rinsing stations: 88 - rinsing channels: 2 (currently ClO₂ and fresh water) - formats: - 1.0 L GDB PET-MW - 0.5 L GDB PET-MW - POC 1810 closures - production capacity: 32,000 bph at 1.0 L - direction of rotation: clockwise - availability: beginning of October 2026

Condition: used, Year of construction: 2013, - Brand: JLG - Type: E400 AJPN - Year of construction: 2013 (1X) - Year of construction: 2011 (2x) - Weight: 6829 kg. - Year of manufacture: 2011 - 2037 hours: €12950,- - Year of manufacture: 2011 - 2086 hours: € 12,950,- - Year of construction: 2013 - 1629 hours: € 15750,- - Working height: 14 meters - Lateral reach: 7.9 meters - Lifting capacity: 230 kg. - Rotatable work tray - Rotating jib - Drive: Battery - Built-in battery charger (220 volts) - Non-marking tires - New safety inspection possible - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: JLG *Type: E400 AJPN * Weight: 6829 kg. * Construction year: 2013 - 1629 hours Kodpfx Aey Itt Tsdqsdr * Working height: 14 meters * Lateral reach: 7.9 meters * Lifting capacity: 230 kg. * Drive: Battery

Condition: good (used), 100 linear meters of used Schäfer R3000 shelving system 📋 Consisting of: • 79 x pre-assembled frames / approx. 300cm high / 50cm deep / used • 312 x shelves / 128cm / 50cm deep / 100 kg load capacity / used • 26 x cross bracing • Color: galvanized, gray • Condition: very good, see photos 💰 Price € 6,700,- net, excluding VAT • Quantity discount: on request • Shipping costs: available throughout Europe on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10163 We constantly have over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Kdodpfjtqnm Ssx Adqsr Lenox Trading – Top warehousing technology & used and new heavy-duty racking Description: Are you looking for high-quality storage racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehousing technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse platforms & steel construction platforms immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and complete handover. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table Ksdpfx Aozt Twyedqedr For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: good (used), total length: 40,000 mm, 40 linear meters of used Schäfer R3000 shelving 📋 Consists of: • 31 x pre-assembled frames / approx. 250cm high / 60cm deep / new • 150 x shelves / 128cm long / 60cm deep / 100 kg load capacity / used • 10 x cross braces • Color: galvanized, grey • Condition: very good, see photos 💰 Price € 3,890,- net, excluding VAT • Quantity discount: on request • Shipping costs: available throughout Europe, on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10050 Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excluding VAT, ex warehouse.) Kodpfjq Dkllox Adqjdr Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full service with our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: ready for operation (used), DECKEL FP 1 / 3 - Axis Active Digital TNC 113 -CE marking -Travel ranges X / Y / Z: 300x160x340mm -Heidenhain TNC 113 / Linear control -Spindle speed range: 40 - 2000 RPM -Feed rates continuously adjustable in all three axes -Rapid traverse in all three axes Kodszvcbgspfx Adqodr -Swiveling vertical head & drilling quill -Vertical & horizontal milling capability -Tool holder: ISO 40 -Drive power: 1.5 / 1.9 KW -Fixed angular table -Chip tray -Coolant system -Work light -Documentation Dimensions: L x W x H: 1.3 x 1.2 x 1.8 meters / Weight: 950 kg Errors and omissions excepted.

Condition: good (used), Complete Steel Structure – 10,000 m² Large industrial steel hall – to be dismantled Dimensions Total: 72 x 144 meters (approx. 10,000 m²) 4x Small hall: 36 x 36 meters 2x Medium hall: 72 x 36 meters Heights Eaves height: 10 meters Ridge height: 14 meters Included Kdsdpfxezcwl Ij Adqer Complete steel structure Exterior sandwich panels Important Notes Please note: The roof will be removed (roof panels are not included). Status The building is currently fully intact and has not yet been dismantled. After dismantling, the materials will be carefully sorted and prepared for transport. Highly suitable for reconstruction at a new location. By giving steel a second life, we buy, dismantle, transport, and sell high-quality steel buildings and structures throughout Europe.

Condition: good (used), Year of construction: 2010, functionality: fully functional, We are selling several dosing systems for liquid silicone of the brand Reinhardt - technik, model LSR 200 Modular, years 2004 to 2010. All units are operational and in good condition. Kodsx A Sxzspfx Adqedr

Condition: good (used), clear span: 2,700 mm, total length: 25,200 mm, load capacity: 2,700 kg, shelf height: 2,000 mm, Technical Specifications for Pallet Racking System: Rack System: Dexion Type: P 90 Set-Up Specifications: Number of Rack Rows: 1 unit Length per Rack Row: approx. 25,200 mm Number of Bays per Rack Row: 9 units at 2,700 mm each Number of Beam Levels plus Base Level: 2 units Volume Specifications: Pallet Spaces per Bay: 9 units Pallet Spaces per Rack Row: 81 units Total Pallet Spaces: 81 units Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n.d. Max. Weight per Pallet: 900 kg Scope of Delivery Includes: 10x Pallet Rack Uprights, used Material finish: sendzimir galvanized Type: M Profile dimensions: 90 x 75 x 1.80 mm Incl. horizontal & diagonal bracings, base plates Uprights are pre-assembled (bolted truss construction) 2,000 mm high 1,100 mm deep 36x Pallet Rack Beams, used Material finish: sendzimir galvanized Box profile: 100 x 50 mm Beam type: SLB 100|15 Bracket: 5 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 2,700 kg, with evenly distributed load 72x Safety Pins, used Material finish: sendzimir galvanized For securing the beams against accidental lifting 40x Bolt Anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x Shim Plates, used Design: fully galvanized For leveling rack uprights installed on uneven floors 1x Load Capacity Sign With specifications for bay and shelf loads, manufacturer and commission number Ksdpfxow Il Sgj Adqsdr Dimensions: 420 x 297 x 3 mm General Information about the Item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be quoted separately depending on the place of delivery or scope of delivery.

Condition: used, mileage: 129,000 km, power: 110 kW (149.56 HP), first registration: 01/2015, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 4,350 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, central locking, Equipment: Power steering * Partition wall * Central locking * Electric windows * electric exterior mirrors * radio cd Kodpfxszvwydj Adqedr * multifunction steering wheel * 6 speed manual gearbox Air conditioning: Air conditioning Safety: ABS Size rear doors Interior load compartment : L 4.35 W 2.10 H 2.10 meters Payload: 1040 KG in very good condition ! TÜV new !!! Financing possible via Santander Bank

Condition: used, mileage: 235,000 km, power: 120 kW (163.15 HP), first registration: 05/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, loading space length: 4,300 mm, loading space width: 2,060 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Audio system Audio 15 (radio with color display), outside temperature display, additional battery (reinforced), 220 A generator, steering wheel (steering column mechanically adjustable), steering wheel with multifunction controls incl. trip computer, Becker MAP Pilot navigation system, smoker's package, spare wheel in driving condition, spare wheel holder under the end of the frame incl. jack, interior rearview mirror, seats in the cab: double passenger seat, seats in the cab: double passenger seat with foldable backrests, seats in the cab: comfort suspension seat, driver's side, reinforced rear stabilizer, reinforced front stabilizer, separation relay with additional battery, fleece battery 95 Ah Additional equipment: Adaptive brake light, driver's side airbag, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, battery 74 Ah, brake assist, braking system with ABS+ASR, headlining in the cab, lockable glove compartment, body/superstructure: standard flatbed, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, model update, engine 2.1 liters - 120 kW CDI CAT, wheelbase 4325 mm, low emissions according to Euro 6 emission standard, safety belt system with warning system (driver's side), seat cover/upholstery: fabric Lima, seats in the cab: adjustable passenger seat, maintenance interval display Assyst, heat-insulating glazing, permissible total weight 3.50 t Interior cargo space: L 4.30 W 2.06 H 2.30 meters Payload 850 KG Towing capacity 2000 KG The vehicle is in good condition! This price is a "take-it-as-is" price, which means with Belgian registration papers but without a valid TÜV (German technical inspection). For an additional price of €2500, you will receive a complete TÜV inspection and any necessary repairs. Kdjdpfx Adezvw Eyeqor