Used Perforator for sale (849)

Condition: new, total length: 5,000 mm, total height: 3,000 mm, total width: 4,000 mm, load capacity: 500 kg, Warehouse stage 4,000 x 5,000 mm, capacity 500 kg / m ² Included in the scope of delivery: Ppedpfx Aod Hl D Dsmpjr 4 stand, on one side of 100 x 100 x 3 mm 2 main carriers C + 300 x 3 x 3,990 mm (perforated) 5 crossbar S + 300 x 2 x 4,800 mm (closed) 10 mounting brackets 2 cross associations 9 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 5,000 mm Floor area: approx. 20 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Support: 100 x 100 x 3 mm Main beam: C profiles C + 300 x 3 mm (perforated) Crossbar: Sigma profiles S + 300 x 2 mm (closed) Flooring: 38 mm chipboard, one side white P6 Support in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost.

Condition: new, total length: 12,000 mm, total height: 3,000 mm, total width: 5,000 mm, load capacity: 500 kg, Warehouse stage 12,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data: Dimensions steel construction: 12,000 x 5,000 mm Dimensions surface: 12,000 x 5,000 mm Floor area: approx. 60 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Included in the scope of delivery: 8 stand on one side 100 x 100 x 3 mm 6 main beam C + 300 x 3 mm, L = 3,990 mm (perforated) 13 crossbar S + 300 x 2 mm, L = 4,800 mm (closed) 26 mounting bracket 3 cross associations 24 Particleboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material incl. load signs Ppsdpfx Asd Htr Rsmpjr Stand either in the following standard colours: RAL 7035 light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (other colours on request) Galvanized main and cross members We manufacture the storage platforms to any other desired measurement. Prices on request. Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Runs shelf inspection according to DIN EN 15635 n

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables Ppodpfsy Ic Imjx Ampsr With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Pedpfxoy Icf Ss Ampspr Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: ready for operation (used), Year of construction: 2022, total width: 3,500 mm, product length (max.): 5,000 mm, number of axes: 6, This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Additional equipment Ppjdpfx Amox D E Huspor • Robot controller and Teach Panel • Bumper (remote protection) and protective foil for TeachPanel • Multifunction flange for magnetic attachment to torch neck • Balancer system for hose attachment • weldControl URCap software • TOUCHSENSE CAP - component search using welding wire or gas nozzle • CAP component OFFSET - for moving and copying programs • operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) • slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm • RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers (safety SPS for 2-station operation) Machine Benefits Technical Machine Benefits • Max reach: 1300 mm • Welding technology: holdONE = torch holder incl. integrated freedrivetaster, fronis cmt torch • Ergonomic holder for ur teach panel • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools shown in the pictures and the 3 cabinets are included. Extra Information Machine still under power

Condition: used, maximum load weight: 27,214 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 02/2026, Equipment: ABS, Refrigeration unit Schmitz S.CU V2.0 HATZ MONO, double-deck system for 11-3 EURO pallets with 22 aluminum double-deck bars, cargo securing rails with perforated slot strips on the side walls, flower width, body certified according to DIN EN 12642 Code XL (TÜV load securing certificate), starting aid, liftable front axle, SCB air suspension, 2 wheel chocks in holder, ABS, pallet box for 36 EURO / 24 ISO pallets, dual-line compressed air brake system with standard and Duomatic couplings, LED side marker lights linked with indicators, storage box, toolbox, spare wheel holder for two E-wheels, bolted underrun protection, Trailer Connect battery, SKO, TK temperature recorder, 3 SCB 9t axles with disc brakes, ATP certificate, internal height 264 cm. Ppjdpfxjyh S Nve Ampor

Condition: used, Year of construction: 2014, Horizon Folding Machine AF-566-F with GFB-56 Gatefold Buckle and LCV-54 Delivery 2nd unit:Stahl 2T 52.3T, Baujahr 1997 Technical data: Pjdpoyftwlsfx Ampopr Format Max.: 558x850 mm (1,100 mm*) Format Min.:128x148 mm (105x148 mm*) Maximum fold length: 450 mm Minimum fold length: 35 mm (58 mm in pocket 1) Paper weight: 40 – 250 g/m² Output: max. 240 m/min, 50,000 cycles/h Feeder stack height: 740 mm Special Equipment: Hubs for the cutting unit, each with 2 perforation tools and 2 cutting knives Very good condition Available at short notice

Condition: used, Year of construction: 2007, Bacciottini Pit Stop AF Speed creasing machine and perforating machine Max. format: 500 × 850 mm Min. format: 100 × 150 mm Max. speed (A4 format): 8,000 sheets / h Paper weight: 80–600 g/m² Creasing & Perforating Performance Max. number of creases per sheet: 100 Distance between creases: 0.1 mm Power supply: 400 V Power consumption: approx. 3.5 kW Machine weight: approx. 230 kg Machine dimensions: approx. 1,600 × 800 × 1,200 mm Pjdpfxeyx D Nmj Ampjpr short-term available

Condition: used, Year of construction: 2002, total length: 4,800 mm, total height: 2,800 mm, total width: 2,400 mm, Empty weight: 3.550 kg Price: On request - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No Ppodeyz Uanspfx Ampor - Serial number: MF038/02 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Rotor width [mm]: 1115 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1500 - Opening width [mm]: 2120 - Opening length [mm]: 1120 - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 36 - Transport dimensions: 4800mm x 2400mm x 2800mm (l x w x h) - Transport weight [kg]: 3550kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideally suited for storing heavy long goods such as pipes, profiles, metal rods, steel beams, wooden battens, and sheet material. With a total length of approx. 13.20 meters, a height of approx. 4.00 meters, and cantilever arms of approx. 120 cm, this long goods rack offers high storage capacity across a total of 4 storage levels (foot level plus 3 additional tiers). Each cantilever arm supports up to 500 kg, and each upright can be loaded up to 2,250 kg. The cantilever arms are bolted and their height can be flexibly adjusted in 200 mm increments using the perforation grid. The fully hot-dip galvanized material ensures long-lasting protection for indoor and outdoor use – new stock available from our warehouse in Wietmarschen. PRODUCT DETAILS: - Rack type: Single-sided heavy-duty cantilever rack - Total rack row length: approx. 13.20 m - Overall height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) - Axial distance (upright spacing): approx. 131 cm - Levels: foot level plus 3 storage levels - Load capacity per arm: max. 500 kg (with even load distribution) - Load capacity per upright: max. 2,250 kg (with even load distribution) - Upright profile: IPE 160, approx. 400 cm, incl. base - Upright perforation grid: approx. 20 cm - First perforation above base: approx. 107.5 cm (top of base) Pedpoy Hii Ujfx Ampopr - Uppermost pair of holes: approx. 50 cm below upright head (top of upright) - Design: single-sided, bolted cantilever arms - Surface: fully hot-dip galvanized - Availability: New / B-grade return stock available from Wietmarschen warehouse SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made from IPE 160, incl. base, 20 cm perforation grid - 33 x cantilever arms, approx. 120 cm made from IPE 80 (without stoppers) - Incl. all connecting elements - Incl. all required bolts - 1 x load capacity sign Price: €5,660.00 net €6,735.40 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Delivery throughout Germany by our partner hauliers – freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our design department will be happy to prepare a non-binding quote tailored to your requirements. Whether new construction, modification, or expansion – we offer expert advice for your rack configuration. Still haven’t found the right solution? Visit our website for a quick overview of many offers and product variants! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone call. You will find our phone number on our company page. You can reach us by phone Monday to Friday, 8:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: new, functionality: fully functional, machine/vehicle number: Flowpack, Year of construction: 2023, - short delivery time, less than 10 weeks! - Model name: Rotection PU flow-wrapping machine Features: Steel frame/stainless steel construction, Fixing of the unwinder by hand without compressed air, Automatic roller centering for precise application, Automatic stop for empty products (no product - no bag), Simple touchscreen operation via color symbols Continuous feeding of products via sensor control, pressure mark sensor included, safety covers 3-sided welded seam packaging (fin seam), longitudinal sealing on the underside of the bag, rotating transverse sealing system Can be combined with upstream and downstream machines, Customer-specific modifications / designs on request Additional options (on request and at extra cost): Thermal transfer printer, e.g. best-before date, print width up to 60 mm, stainless steel finish/lacquering, cooling applications for ice cream packaging, zig-zag knife, Euro hole punch etc., applications for shrink films (flow shrink), gas flushing units for protective atmosphere (extend product shelf life), automatic product feed systems, intermittent insertion systems, perforation units (tear strip) for easy opening, length-dependent product processing by photocell scanning Horizontal production orientation Conveyor system either chain conveyor or belt conveyor, length as required Film feed from below Flexible and fixed forming shoulder Operator display 10" touchscreen with memory functions, swivel arm for convenient operator handling Drives & control 8 servo motors and PLC control Packaging length 120-600 mm Packaging width 70-250 mm (depending on film width) Packaging height max. 80 mm (depending on forming shoulder) Speed 25-100 bags/min Film width 200-600 mm Consumption approx. 7 KW Power supply 220-240 V / 50 Hz / 1-phase Machine weight approx. 1000 kg Machine dimensions approx. 5230 x 1380 x 1460 mm System material 304 stainless steel Pressure mark sensor Yes External compressed air required Yes Printer holder at extra charge Delivery time Current delivery time less than 10 weeks Pedpfeq Ikfmjx Ampopr

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Ppjdpfx Ameyxp Nxspor Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Condition: new, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 890 mm, vehicle inside width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, stanchions removable, 40 mm wooden floor, 3 stanchion pockets for 80 x 80 stanchions in the middle, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 8 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Podpfx Amoy Hfv Djpopr

Condition: new, empty load weight: 2,950 kg, maximum load weight: 11,450 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65R17,5, color: other, gearing type: other, front tire size: 205/65R17,5, rear tire size: 205/65R17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, 3 stake pockets in the middle for 80 x 80 stakes, removable stakes, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 9 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Podoy Hfutepfx Ampopr

Condition: used, Year of construction: 2014, Folding machine MBO T700/4 Year: 2014 Description: - 4 page folder - MBO Navigator Feeder - Round pile feeder: R 700 - Pump Buckle folding unit: 1 MBO FP 10 - First buckle folding section with 4 buckle plates - Slitter shaft cassette - Perforating shaft - Anti noise hood(s) Podpfxoyzdt Ds Ampspr - Excluding delivery

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Applications : • Blanching of vegetables and potato products Ppodpfxeyylumo Ampjr • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues • Cooking of poultry • Continuous soup production

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235/75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, stanchions removable, 40 mm wooden floor, 3 stanchion pockets for 80 x 80 stanchions in the middle, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 8 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Podjy Hclcjpfx Ampopr

Condition: like new (used), Year of construction: 2019, operating hours: 39 h, functionality: fully functional, machine/vehicle number: MZ-7321/19 / 11024, total height: 2,198 mm, total width: 1,648 mm, total length: 3,500 mm, overall weight: 3,500 kg, rotor diameter: 400 mm, rotor width: 850 mm, type of input current: AC, input voltage: 400 V, rotational speed (max.): 100 rpm, power: 30 kW (40.79 HP), As-new single-shaft shredder / size reduction system with minor signs of use. Used solely for testing purposes. The rotor shaft is equipped with a heavy-duty wear protection. Cassette system for rotor knives, 34 x 34 mm. Electric motor 30 kW, total installed power 37 kW, hydraulic power 3.75 kW, 400 V, 3-phase. Additional new rotor and stator knives included as spare parts. German operating manual. Three-part, adjustable stator knives. Hopper lockable, perforated screen 40 mm. The machine can be demonstrated under power. No warranty after purchase. Free loading from factory premises – Raesfeld. Detailed photos available on request. Subject to prior sale. Prices are net prices. Psdpey E S S Asfx Ampspr

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Ppedpfx Amjvvi Anjpjr Storage location: Supplier

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Equipment: foot remote control, Demmeler Ergonomix M-2000 Perforated Plate, original 1.0m, diagonal 1.1m, 28mm holes Almost unused, like new, top condition Thanks to the ingenious arrangement of the entire mechanism, the developers at Demmeler have succeeded in creating an unbeatable large working area while maintaining a compact footprint for the Demmeler Ergonomix®M manipulator. The manipulator always brings maximum loads into the ideal position. A special feature of the Demmeler Ergonomix®M product family is the wide swivel range of up to 180°. This provides a decisive advantage for many workpieces, allowing them to be fully machined in one clamping setup without the need for additional repositioning. Payload 2000 kg Ppedpfoy Hl N Dsx Amper Model M2000 A = min 490 mm B = max 970 mm C = max 1480 mm D = max 1000 mm Torque 1250 Nm Tilt Angle 180° Tilting Moment 8000 Nm

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. Podpoy Hm E Hjfx Ampspr • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC Pjdpjy Hm Etjfx Ampepr • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall Podpfx Ajy Hm Eysmpepr • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 3,642 mm, total length: 3,334 mm, input voltage: 400 V, feed length X-axis: 2,900 mm, feed length Y-axis: 2,600 mm, working width: 2,600 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, cutting width (max.): 2,540 mm, cutting height (max.): 20 mm, compressed air connection: 9 bar, We are selling our Atom FlashCut Fashion 26B All-in-One fully automatic cutting table system. With a usable working area of 2,900 x 2,600 mm, a cutting window of 2,540 x 850 mm, and a separate unloading area of 1,200 x 2,600 mm, the FlashCut 26B offers ideal conditions for efficient workflows. The maximum cutting height of 20 mm allows for processing a wide range of materials – including multilayer applications. Two independently operating tool heads ensure high speed and maximum productivity. Servo drives on the X, Y, and Z axes guarantee precise movements with a travel speed of up to 80 m/min and an acceleration of 1G. Intelligent Material Handling & Vacuum Technology A continuous conveyor belt feeds the material into the processing zone. The vacuum table is divided into 300 x 300 mm segments, allowing targeted activation of individual areas. This ensures precise material fixing while minimizing energy consumption. Two high-performance vacuum pumps with frequency control (3–15 kW) automatically adjust their output to actual requirements. The result: secure material fixing with energy-efficient operation. Precision through Camera and Projection Technology For maximum material utilization, the system is equipped with two cameras with integrated light sources and dimmers for detecting irregular material contours – for example, when processing leather hides. Flaws can be digitally marked and taken into account during further processing. Two high-performance projectors support automatic nesting by projecting cutting contours directly onto the material. In addition, item numbers, sizes, or other markings can be projected onto the cut parts – ideal for process reliability and traceability. Powerful CNC Control & Software The system features a modern CNC control unit, including TFT color display, keyboard, and USB interface. An integrated computer with Windows Embedded, Ethernet connectivity, and TeamViewer support enables easy operation and remote maintenance. The software package includes: - DXF converter for reading and converting CAD files - Interactive layout software - Automatic nesting software - CAD module for creating simple geometries Optionally, the Luxury Nest Strategy adds a specially developed nesting logic for optimizing leather cutting. It takes into account quality zones, defect areas, and defined rotation and grouping rules to ensure maximum material yield. Versatile Tool Equipment The FlashCut 26B comes with a multi-tool head. Standard tools include: - Drag knife - Punch tools (various diameters) - Marking tool - Tracing needle - Laser pointer - Knife holder and ejector This makes the system flexible for cutting, marking, and perforating tasks. Psdpfx Ameymn R Njpepr Safety & Reliability A safety system with light barriers and emergency stop button ensures maximum operational safety. The machine is CE-compliant and designed for continuous industrial operation.

Condition: new, empty load weight: 3,026 kg, maximum load weight: 11,374 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle inside width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, stanchions removable, 40 mm wooden floor, 3 stanchion pockets for 80 x 80 stanchions in the middle, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 8 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Pjdpfxsy Etpij Ampepr