Used People Stopper for sale (391)

Condition: used, functionality: fully functional, machine/vehicle number: A600003888, Year of construction: 2022, operating hours: 64 h, load capacity: 227 kg, lifting height: 3,660 mm, fuel type: electric, battery voltage: 24 V, overall weight: 863 kg, Equipment: CE marking, We are offering this used SkyJack SJ 12 scissor lift, manufactured in 2022. Model number: SJ 12 Dsdpfxszrzy Ho Abvjwb Type group: 3 A Serial number: A600003888 Maximum platform height (indoor): 3.66 m Maximum platform height (outdoor): 3.66 m Capacity (indoor): 227 kg Maximum number of people (indoor): 2 people Maximum wind speed (indoor): 0.00 m/s Maximum manual force (indoor): 400 N Capacity (outdoor): 227 kg Maximum number of people (outdoor): 1 person Maximum wind speed (outdoor): 12.5 m/s Maximum manual force (outdoor): 200 N Machine weight: 863 kg System pressure: 207 bar Maximum tilt angle (indoor): 3.00 ° Maximum tilt angle (outdoor): 1.50 ° Voltage: 24 V Year of manufacture: 2022 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2007, operating hours: 1,632 h, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typographical errors, and prior sale: Manufactured 09/2007 Maximum working height 11.70 m Maximum platform height 9.70 m Total operating hours 1,632, with 1,514 operating hours on the new Kubota engine New Kubota engine installed in 2021 for €7,000.00 (net), after which it ran for 118 hours and was kept as a backup unit Platform dimensions 1.42 m x 2.49 m Platform extension 1.50 m Permissible gross vehicle weight 3,475 kg Payload 454 kg For 2 people Overall length 2.72 m x width 1.73 m x minimum height, foldable for off-road use 2.51 m Diesel engine, 4x4 Gradeability 40% Travel speed 0.6 - 6.1 km/h Lifting time with rated load 39 sec Driving at full height with extended platform Diesel engine mounted on extendable support Platform extension 1.50 m Spring-loaded, self-closing full door Foam-filled tires Tilt sensor with alarm and automatic emergency shutdown Hour meter Overload sensors Price: €9,500.00 (net) Dwedjzviuyopfx Abvjb All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: good (used), Year of construction: 2014, mast type: telescopic, fuel type: diesel, color: other, General information Mileage: 92.626 km Registration number: VJ-350-F Technical information Transmission: Manual gearbox Drive: Wheel GVW: 3.410 kg Functional Lifting capacity: 200 kg Working height: 2.100 cm CE mark: yes Dwodpfxozlhmge Abvob Condition Technical condition: good Visual appearance: good Mercedes Sprinter with CMC PLA210 – Year 2014 – 92,626 km (ascending) Year of construction: 2014 Mileage: 92,626 km Aerial work platform type: CMC PLA210 Chassis brand: Mercedes-Benz Sprinter Working height: 21 meters Max. load on work basket: 200 kg (including 2 people) Work basket connection: 220V Total weight: 3,410 kg CE certified Price excluding VAT

Condition: new, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 6 bar, total height: 1,500 mm, total width: 700 mm, total length: 1,600 mm, Equipment: documentation/manual, For sale is a system that is still in its original packaging and located in the warehouse. The system has never been put into operation. Only the originally installed Grundfos pump was removed and replaced with a new replacement pump. Otherwise, the overall condition of the system corresponds to its original delivery condition. Djdpozbib Sofx Abvjwb The system includes: Water softening system Pre-filter Ultrafiltration system with a downstream reverse osmosis system Activated carbon filter UV lamp All installed components and wear parts, such as filter cartridges, filter inserts, replacement UV lamp, etc., are included as spare parts. The system will be packaged and prepared for transport on four Euro pallets and one larger disposable pallet. The original purchase price was €47,788.47 net. Use of UF membranes for the filtration of viruses, bacteria, and cysts. Important minerals such as calcium and magnesium are retained after UF filtration and do not need to be added back using complex and expensive technology. - Health centers and dental practices, where people are exposed to particularly high risks of infection from waterborne pathogens. - Hotels and restaurants to provide high-quality and safe drinking water for consumption, food preparation, showering, and washing. - Legionella prevention in showers in public buildings. - Complete drinking water treatment in the household sector to improve drinking water quality for consumption, food preparation, showering, and washing. - Well water treatment

Condition: good (used), functionality: fully functional, Year of construction: 2014, operating hours: 247 h, load capacity: 350 kg, lifting height: 13,700 mm, lifting power: 350 kg/m, platform length: 2,260 mm, platform width: 1,160 mm, overall weight: 3,221 kg, transport length: 2,480 mm, transport width: 1,190 mm, transport height: 2,540 mm, fuel type: electric, tire size: 38 × 13 × 28 cm, tire condition: 85 %, color: blue, 🔧 Key Specifications: • Year: 2014 • Operating hours: 247 • Machine width: 1.19 m • Drive system: 2 WD • Drivable at full height: Yes • Platform extension: Yes • Power: 24V DC (4x 12V, 150Ah) • Working height: 13.70 m • Platform capacity: 350 kg • Power type: Electric • Type of battery: Lead-acid • Outriggers self-leveling: No • Platform size: 2.26 × 1.15 m (extended: 3.18 m) • Tyres: Non-marking solid • CE certified: Yes • Machine weight: 3,221 kg • Indoor / Outdoor use: Indoor only Dwsdpfx Absy Hppbsveb ✨ Highlights: ✅ Carefully selected from trusted sources with verifiable history ✅ CE certification and full documentation included ✅ Ready for immediate transport and operation ✅ Comprehensive technical documentation available ⚙️ Condition: Clean exterior and well-maintained systems. Original blue paint. Tyres: 80% front / 75% rear. Battery and lift mechanisms tested and operational. 🌍 Location & Delivery: 📍 Stored in Sittard, Netherlands 🚚 Worldwide delivery possible 💰 Price €8,250 (EXW, excluding VAT) Compact and powerful electric scissor lift ideal for indoor maintenance, installation, and warehousing. The Genie GS 4047 offers excellent working height (up to 13.7 m), intuitive controls, and a safe work platform for up to 3 people indoors. Ideal for narrow aisle operations and high shelving. 🚚 Delivery: • Crane loading available on request for hassle-free handling at departure • Flexible dispatch options tailored to your destination and logistics preferences • All shipping handled professionally by Colle Rental & Sales logistics team

Condition: used, Year of construction: 2010, Capacity: 18000 bottles/h closing heads: 24 pieces Power: approx. 5 kW Water: approx. 200 l/h Compressed air: approx. 2 cbm/h Dwsdpfx Asvcqgbjbvjb Length: 3,3 m Width: 2,2 m Height: 2,4 m Weight: 3000 kg Formats: 0,33 l; 0,5 l; max. bottle diameter 90 mm Running direction: right - left Material: Stainless steel, wear-resistant plastic Base construction: miniaturized, hygienic machine table in outward beveled design Features: mechanical / pneumatic control device (testing of bow clamping), central lubrication, height adjustment for processing of different bottle heights, rinsing and swelling device, high-pressure injection device, HDE injection nozzle at the discharge table, Discharge table, pusher station

Condition: good (used), Year of construction: 1984, functionality: fully functional, Offered from a workshop for people with disabilities is a fully functional panel saw. Altendorf F45 Tiltable up to 45° via handwheel Year of manufacture 1984 With scoring saw (no saw blade included) Max. saw blade diameter 400 mm A 350 mm blade is installed Max. cutting height with a 350 mm blade = 98 mm at 90° – 75 mm at 45° With motor brake (approx. 2.5 seconds to stop) Carriage length 2500 mm Cutting width to the right of the saw blade 850 mm Speeds 3/4/5/6000 rpm With cutting line laser Gresser HEnE 632.8 nm 380 Volts Weight 990 kg Emergency stop button Dodpfozdqxvsx Abvowb + used and new saw blades as shown in the picture

Condition: ready for operation (used), Year of construction: 1986, Available immediately from a workshop for disabled people: Dwsdpfx Abjzyggujveb L & Z lathe, Imatec Type ID 175 Year of manufacture 1986 Center height 175 mm Diameter over bed 350 mm Diameter over carriage 210 mm Distance between centers 1000 mm Spindle bore 41 mm Spindle speeds 35.5 – 1600 rpm Digital display Chuck Faceplate Multifix with holders Coolant system Drive power 3 kW Weight 1700 kg Price: EUR 1,750.00 plus VAT, ex works.

Condition: used, mileage: 133,000 km, power: 132 kW (179.47 HP), first registration: 08/2009, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 11/2026, color: orange, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 7,200 mm, total width: 2,360 mm, total height: 3,670 mm, Year of construction: 2009, Equipment: ABS, soot filter, 1st owner. Perfectly maintained and consistently well-cared-for vehicle from a government agency. German truck, recently passed inspections with only a few operating hours. Valid DGUV (German accident prevention regulations) until 12/2026 and TÜV (German vehicle inspection) until 11/2026. Extensively inspected by a Ruthmann service technician in December 2025, shortly before its scheduled decommissioning, and declared "ready for use." In December 2025, a complete inspection was carried out, including lubrication, maintenance, and replacement of minor parts such as signs and membrane keypads. The vehicle was recently used for maintaining public lighting. A new vehicle has now been purchased. Until then, the aerial platform was in full operation. The TÜV inspection on the truck was renewed at 132,918 kilometers, with validity "without any apparent defects" until November 2026. Chassis: MAN TGL 8.180 with leaf spring suspension. Euro 4 engine. 6-speed manual transmission ZF Ecolite. Registered as a "self-propelled working machine, aerial platform." Unladen weight only 5835 kg. Therefore, a large payload reserve is available, and heavy materials can still be carried in the equipment compartments. Permissible total weight: 7490 kg. Wheelbase 3600 mm. Driver's seat, comfort version with air suspension. 3 seats in total. Yellow rotating beacons. Minor signs of wear from the years are present, but no significant damage. This is an excellent-running truck. All documentation from RUTHMANN is included in the original (operating manual with parts list, inspection book, all inspection reports from recent years). Working height approximately 13 m. Lateral reach 8.20 m. Basket load capacity: 200 kg (2 people plus materials). Djdpfeyrk A Sjx Abvewb Basket size: 1300 mm long / 1000 mm wide / 1100 mm high. The basket is made of plastic. Insulation against 1000 volts. Compressed air blow-out gun in the basket. This offer is only valid for commercial enterprises or government agencies. Subject to prior sale and errors. The net price for this excellent Ruthmann aerial platform is 22,500 euros!

Condition: used, mileage: 342,000 km, power: 65 kW (88.38 HP), first registration: 04/2003, fuel type: diesel, overall weight: 2,700 kg, next inspection (TÜV): 09/2027, color: blue, gearing type: mechanical, emission class: euro3, number of seats: 2, total length: 4,707 mm, total width: 1,840 mm, total height: 2,050 mm, loading space length: 2,400 mm, loading space width: 1,600 mm, loading space height: 1,370 mm, Equipment: ABS, Second-hand since 2007. Valid TÜV (German vehicle inspection) until 09/2027. Last oil service with filter replacement was in 07/2026, 500 kilometers ago. Passenger car registration with up to 9 approved seats. The vehicle was always used as a work vehicle and transporter. Therefore, it has a wooden floor in the rear and a small shelf behind the permanently installed, original partition with a window. There are no other seats besides the 2 front seats. Sliding door on the right. Practical double doors at the rear, with wipers and heated rear window. Sturdy roof rack made of steel tubes, permanently installed by a tradesman in high quality "for eternity." Painted in the vehicle's color. Power steering. ABS. Radio. Airbags for driver and front passenger. Euro 3 TDI diesel engine with 2461 ccm and 88 hp. Engine code: AJT. Dwsdpfx Abezxkduevob 5-speed manual transmission. Tow hitch with a 2000 kg braked towing capacity is prepared, but the ball head is missing. Oil pump with reduced performance according to workshop diagnosis. The oil warning light sometimes comes on. During the last drives, the light was off again. The T4 is currently running perfectly normally and has full engine power. Brake warning light with contact error. Has been illuminated for some time. Brakes and brake pad thickness are in order. Some rust, but overall still minimal. This T4 TDI was driven by the same driver for many years and was also used for vacation trips and personal use. He often repaired the car himself. This vehicle is well-known here "in the village," and many people know the person who always drove it. This offer is only valid for businesses and freelancers of any kind. Sale to private end consumers is unfortunately not possible. Subject to prior sale and errors. Net price: 2900,- Euro!

Condition: used, mileage: 52,761 km, power: 118 kW (160.44 HP), first registration: 09/1997, fuel type: diesel, empty load weight: 4,880 kg, maximum load weight: 2,610 kg, overall weight: 7,490 kg, next inspection (TÜV): 02/2028, fuel: diesel, color: red, driver cabin: other, gearing type: other, emission class: none, suspension: other, total length: 6,300 mm, Year of construction: 1997, construction height: 2,850 mm, The MAN L2000 DoKa LF8/6 is a versatile and robust utility vehicle that impresses with its unique combination of proven MAN technology, manageable mileage, and a practical double cab. Anyone looking for a reliable vehicle for commercial, municipal, or specialized applications will find an interesting and distinctive solution here. Powered by a 4,580 cm³ engine, the MAN L2000 offers a solid foundation for a wide range of tasks. The low mileage of only 52,761 km is particularly noteworthy. For a vehicle with initial registration in September 1997, this mileage is exceptionally attractive and makes the L2000 a remarkable opportunity for buyers who value a vehicle with comparatively low mileage. The DoKa version further expands the range of applications and provides a practical solution when materials or equipment, as well as several people, need to be transported. This makes the vehicle ideally suited for fire departments, municipalities, construction companies, service providers, or other areas of operation where flexibility and functionality are required. Djdpfxey Ihrkj Abvjwb The MAN L2000 DoKa LF8/6 combines the charm of a proven commercial vehicle with a surprisingly low mileage for its age. Anyone looking for a robust and versatile vehicle with a distinctive character should take a closer look at this model. It is an interesting opportunity for all those who want to combine proven MAN quality and practical applications into an exceptional overall package. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN Dedpezfyu Ajfx Abvewb 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: used, functionality: fully functional, conveyor belt length: 15,000 mm, conveyor belt width: 600 mm, conveyor belt speed: 500 mm/s, total length: 105,000 mm, total width: 678 mm, total height: 220 mm, power: 0.75 kW (1.02 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: Bonfiglioli, For sale: 7 units of stainless steel VLT Flat Top Conveyor Belts (600 mm) – Available individually or as a complete set! Are you looking for a reliable, hygienic, and versatile conveying solution for your production or packaging line? We offer these used stainless steel VLT Flat Top conveyor belts. Thanks to the high-quality stainless steel construction and plastic components, this system is ideally suited for both indoor and outdoor use. Flexible purchase and length: A total of 7 units are available, with a total length of 15 meters. The belts can be purchased individually (as separate sections) or as a complete set. The total length can be fully customized to your needs and layout! The belts are equipped with a high-quality blue Habasit modular belt and feature integrated pneumatic crate and product stoppers to accurately control or buffer your product flow. Technical specifications: Number available: 7 units (individual sale possible!) Total length: 15 meters (flexible and customizable) Frame material: High-quality stainless steel / plastic Djdpfxjy U Iy Ue Abvewb Belt width: 600 mm Belt type: Habasit modular plastic (modular belt) Speed: approx. 30 m/min Drive: Powerful Bonfiglioli motor Rated power: 0.75 kW Voltage / Frequency: 400 V (three-phase) / 50 Hz Included: Pneumatic crate/product stoppers Assembly and service: The conveyor belts are available immediately. Do you not have the resources or time for assembly or connecting the parts? No problem. Our specialists can handle any assembly, connection, and installation at your location for an additional fee, upon request. Interested? Would you like to order a single section, view the entire set, or receive a competitive price quote right away? Please contact us via message or by phone!

Condition: used, mileage: 21,699 km, power: 121 kW (164.51 HP), first registration: 06/1994, fuel type: diesel, empty load weight: 6,230 kg, maximum load weight: 2,770 kg, overall weight: 9,000 kg, fuel: diesel, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 9, total length: 6,330 mm, Year of construction: 1994, construction height: 3,000 mm, Equipment: all wheel drive, The Mercedes-Benz 917 AF LF8/6 fire engine is a robust, used emergency vehicle that was first registered in 1994. It features a powerful 6-liter diesel engine with an output of 121 kW (165 hp) and a 4x4 drive, making it ideal for use on difficult terrain. The vehicle has a mileage of only 21,699 km, which is exceptionally low for a model of this age. The fire engine is painted in a striking red and offers space for up to 9 people. With a permissible total weight of 9,000 kg and dimensions of 6,330 mm in length, 2,500 mm in width, and 3,000 mm in height, it is a substantial and functional vehicle that is well-equipped for fire or rescue operations. Dwsdjxv Et Ejpfx Abvsb The vehicle can be inspected in Rohrbach by appointment. Contact can be made by telephone or email for detailed information. Sale is only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Table width: 325 mm Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Tigerlink download software for downloading a csv file (cutting list). Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding. Dwjdpfx Abjzuyx Hjveb

Condition: used, functionality: fully functional, total length: 262 mm, total height: 158 mm, total width: 158 mm, overall weight: 1 kg, Artec Eva professional 3D scanner, tested and fully functional. Handheld scanner with white structured light technology (LED), ideal for scanning medium and large objects with high-quality color capture. KEY FEATURES: - 3D resolution: up to 0.2 mm - Accuracy: up to 0.1 mm - Capture speed: 16 FPS (up to 2 million points per second) - Technology: white structured light (safe for scanning people) - Color scanning with 1.3 MP texture - Working distance: 0.4 - 1.0 m - Weight: 0.85 kg (portable, handheld) - Power: 12V DC 2A - Manufactured in Luxembourg Djdpfjy U H Rxjx Abvswb - Includes original carrying case and cabling APPLICATIONS: medical sector (body scanning, orthopedics, prosthetics), automotive (reverse engineering of medium-sized parts, dimensional control), heritage and museums (sculptures, archaeological artifacts), sports and technical apparel (human body scanning, custom helmets), forensics and criminology, VFX, and video games. The Artec Eva is the world’s best-selling portable 3D scanner thanks to its combination of accuracy, ease of use, and versatility. Unit sourced from a professional service bureau. Available for demonstration before purchase. Location: Spain. Easy shipping throughout Europe. Please inquire about the type of Artec Studio software license and included accessories.

Condition: used, mileage: 90,616 km, power: 177 kW (240.65 HP), first registration: 03/1998, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,400 mm, total height: 3,170 mm, Year of construction: 1998, Equipment: ABS, compressor, Mercedes-Benz 1524 with METZ DLK 23-12 PLC II aerial ladder – Registered: 05.03.1998 Mileage: 90,616 km Operating hours: 3,626 hours Base vehicle equipment: * Suspension type: leaf spring rear axle * Wheelbase: 4250 mm * Permissible gross vehicle weight: 15 t * 7-speed manual transmission * Fuel tank: 127 l, located under the platform at the rear * Differential lock in rear axle * Stiffer rear springs and shock absorbers * Front spring: torsion bar, reinforced stabilizer and shock absorbers * Co-driver's double bench seat * Exhaust pipe for fire department, positioned in front of the front axle * Engine brake * Anti-lock braking system (ABS) * Traction control system (ASR) * Fog lights * Hour meter * Headrest for driver * 2 headrests for co-driver * Cab rear wall with 2 windows * Electric window lifter on the right * Heated and electrically adjustable rear-view mirror with wide-angle mirror * Ramp mirror on the right Dwsdpfsxa Sbwjx Abvsb * Rotating beacon, blue light, and siren * Front flashing blue light Aerial ladder equipment: * Metz aerial ladder DLK 23-12 PLC III with rescue basket (rescue height approx. 30.75m) Max. outreach angle: 75 degrees, Max. basket load capacity: 270 kg, Nominal rescue height: 23m, Nominal outreach: 12m, Outrigger system: horizontal-vertical, Variable outrigger width between 2,400mm and 4,500mm * Folding rescue basket for 3 people * 2 LED spotlights 24V at the front of the rescue basket * Load eye at the top of the lower ladder, on the reinforced ladder support, for lifting, lowering and pivoting loads * Mounting bracket for portable generator 5kVA on the turntable * 2 halogen spotlights 24V / 70W at the head of the lower ladder with Teleflex control from the main control station * 400V power supply, protected in the ladder support, to the top of the upper ladder including socket and power supply with plug from the generator on the turntable * Bridge cable from the head of the upper ladder to the rescue basket with 1 socket 400V and 2 sockets 230V in the rescue basket * Fixed water line in the lower ladder * Adjustable spray nozzle, mountable in the rescue basket * Storage for adjustable spray nozzle * METZ stretcher holder SLK 111 including storage on the platform * Box for storing the stretcher in the platform * Siren with 4 sound cups instead of BOSCH high-tone horn * Fixed charger 230V / 24V * Service booklet available, all maintenance performed annually ----Ready-to-drive vehicle from first owner, ladder system only works sporadically - defects present! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also Whatsapp Email: Subject to changes, prior sale and errors!

Condition: good (used), Roller conveyor, roller track, roller track Dedpodwa Dkjfx Abvjwb -Roller width: 595 mm -Conveyor length: 1500 mm -Roller diameter: 20 mm -Roller conveyor height: 280 mm -Dimensions: 1500/760/H280 mm -Weight: 44.5 kg

Condition: used, Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. Dodpfevguttox Abvswb This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 – 1.500 at a speed of 3800 BPH. The direction of rotation is clockwise, and the state is currently in production. This machine is currently used for filling still wine. This machine includes also a rinsing machine that has 16 forceps and does 2 treatments. Then follows the 16-valve filler with a fixed nozzle. Finally, there is the 4-head cork stopper that can process a diameter of up to 26 mm. There are several spare parts for this machine. Measurements: Length: 4600mm Width: 2300mm Height: 3400mm Consumption Volt: 380 Hz: 50 Used Capper The used Capper is Bertolaso branded and the model is Alfa 110 Inox from 1995 with 1 head. Clockwise rotation direction, is always complete with all available manual and accident prevention protections. The operational status is currently in production and the type of container handled is 0.75 liter Bordolese. The cap type is Stelvin and the size is 30×60, while the neck type is standard. Measurements: Length: 800mm Width: 900mm Height: 2600mm Volt consumption: 380 Used Capsuler This machine is branded Robino and Galandrino model Fenix 2 of the year 2000. It is a used capsuler with 2 heads and the speed reached is 6000 BPH with the following formats: 0.375 – 0.750 – 1.500. There are safety protections and manuals are also available with the necessary instructions. The state is currently in production. The specific product treated is still wine. The types of capsules used are the Enoterms in Polylaminate. Weight: approx. 1800 kg Consumption Volt: 380 Kw: 4.5 Hz: 50 Used Labeling Machine of this Used Wine Filling Line Branded Kosme Model Extra Fix 8T S3 E3 + S2 E2 Adhesives year 2005. Speed of 3000 BPH on the treated formats of 0.375 – 0.750 – 1.500 L. Machine currently in production in the line with its accident prevention protections and user manuals available.

Condition: used, Year of construction: 1999, machine/vehicle number: M271, Used Filling Monoblock FIMER 20/20/3/3 up to 4500 bph This Monoblock efficiently processes still liquids, such as water and wine. Notably, FIMER manufactured this machine in 1999, ensuring an operational capacity of up to 4500 bottles per hour (BPH) for bottling 0.75-liter glass containers. Additionally, this unit currently remains in storage, ready for immediate use. Dwsdevgvd Hjpfx Abvsb Monoblock Structure and Rotation This machine operates with a clockwise rotation, which allows it to move containers smoothly and continuously through each treatment station. Consequently, this rotational design synchronizes the rinsing, filling, and capping cycles precisely, which helps to maximize productivity and minimize bottling interruptions. As a result, the machine maintains efficient workflow throughout the process. Technical Data and Electrical Specifications This unit connects to a 380 V power supply and operates with 6.5 kW of power at a frequency of 50 Hz. Therefore, these specifications match most industrial networks, providing ample power for each bottling stage. Rinsing Station With 20 grippers in the rinsing station, the machine treats each bottle with a single rinse to prepare it for filling. Given this setup, the Monoblock can rinse containers quickly and effectively, removing any residues and thus readying them for the filling phase. Filling Station in the Used Filling Monoblock FIMER 20/20/3/3 up to 4500 bph In the filling section, the machine uses 20 fixed valves with a gravity or light vacuum system, ensuring that it fills each bottle evenly. Moreover, this design maintains speed and precision, achieving a steady output of up to 4500 BPH. Consequently, this filling method suits still products like water and wine, preserving their properties and, equally important, preventing turbulence. Capping Station The capping station is equipped with three heads for aluminum screw caps and three for straight cork stoppers. In this way, the machine can accommodate different closure types, including 31×18 mm caps. Therefore, this versatility ensures tight, protective seals on containers after filling. Safety Features of the Used Filling Monoblock FIMER 20/20/3/3 up to 4500 bph Finally, this Monoblock includes advanced safety systems, which protect both operators and containers throughout use. Furthermore, these safety features provide additional reliability, ensuring the machine’s consistent functionality.

Year of construction: 2014, condition: good (used), Alimak TPL 2000D Transport Platform Djdpstnczcofx Abvswb Brand: ALIMAK HEK Type: TPL 2000D Year of Manufacture: 2014 Serial Number: 50229 Weight: 1850 kg Overall Dimensions (L): 1500 mm Overall Dimensions (W): 3200 mm Power Specifications: 400 V, 50 Hz, 3-phase; Rated Power: TP 2 x 3.8 kW, MH 2 x 7.6 kW; Rated Current: TP 15.4 A, MH 30.4 A; Connected Load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Maximum number of people (including payload) TP mode: 7 Number of people - MH mode: 0 Lifting speed (m/min) TP mode: 12 Lifting speed (m/min) MH mode: 24 Maximum lifting height (bound): 100 m Maximum distance (m): 7.5 Maximum overhang (m): 4.5 Maximum height of first guy wire (m): 6 Mast type: Triangular 350, steel tube Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm Dsdpfx Abex Rpgbsvswb - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: PD 82 en Multi, Why choose the original Tiger Pile Driver? 1850 strikes per minute assembled in Western Europe drives piles up to 130mm powered by a Honda 4-stroke engine one-person operation ergonomic and durable from €2190.00 excl. VAT The Tiger Multi can drive piles up to 130mm. Demonstration machines/used machines available! Dwodpfjzx Ul Asx Abveb The Tiger pile driver runs entirely on gasoline and is easy to operate by one person. This makes the Tiger pile driver very mobile and user-friendly. Because the striking mechanism of the Tiger pile driver is made of double-hardened steel, the quality of this gasoline-powered pile driver is very high. It is an extremely powerful machine that is surprisingly lightweight, weighing only 18kg. The Tiger pile driver is powered by a Honda GX35 or GX50 four-stroke engine. This is the highest quality engine for this type of work. The engine is designed to tilt, allowing you to work effectively at any angle. The movement is achieved by air compression generated within the Tiger pile driver itself. This means that the Tiger pile driver does not require any other power source, such as hydraulics or a compressor, and cannot be overloaded. In addition, the Tiger pile driver is incredibly fast, delivering 1850 strikes per minute. To ensure comfortable operation, the Tiger pile driver has internally spring-dampened handles. The Tiger pile driver is designed to perform its job under the most extreme conditions without the need for additional machines or materials. The Tiger pile driver is suitable for both wooden, metal, and plastic piles. With this pile driver, the pile is immediately fixed in the ground, unlike setting it using a ground auger. A major user benefit of the Tiger pile driver is the fact that you can install all types of wooden, steel, and plastic piles up to a diameter of 105 mm. Even square piles of 7x7/8x8 and 9x9 can be installed in this way. The Tiger pile driver was designed with the help of people with more than 20 years of practical experience in driving piles for fencing. The key words here were: fast, lightweight, reliable, and user-friendly. The Tiger pile driver has more than succeeded in these areas. After testing more than 20,000 piles, the Tiger pile driver has proven to be extremely reliable. The assembly in the Netherlands of high-quality components and the drive from a Honda GX35 or GX50 engine ensures a quality product for the professional user. With 3 mobile dealers throughout the country, a rapidly growing network of permanent dealers, and several rental/loan machines in stock.

Condition: used, mileage: 371,140 km, power: 309 kW (420.12 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 10,170 kg, maximum load weight: 15,830 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, fuel: diesel, brakes: intarder, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 9,600 mm, Year of construction: 2012, construction height: 4,000 mm, number of beds: 1, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, Cylinder head gasket defective. The used Iveco STRALIS AS 260 S42 Y/FS-CM Eco is a powerful truck with a 10,308 cc diesel engine and an output of 309 kW (420 hp). The vehicle, first registered on December 3, 2012, has a mileage of 371,140 km. It complies with the Euro-5 emissions standard and has an automatic transmission. With a length of 9,600 mm, a width of 2,550 mm and a height of 4,000 mm, this truck offers a permissible total weight of 26,000 kg. The yellow (metallic) vehicle is equipped with a green environmental badge (Class 4) and includes practical features such as a steering axle, a rear-view camera and an integrated air conditioning system. It offers space for two people and has two doors. The truck has been used by one previous owner and is in used condition. Djdpfx Abowzzkysvswb In addition to the technical specifications, the seller offers various flexible sales and service options, including the possibility of an inspection and delivery within Germany. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, container length: 20 ft, color: blue, machine/vehicle number: 022499722, Equipment: bathroom, hot water, lighting, shower, Equipment: 6 pcs. wall reinforcement 2 pcs. sanitary windows with tilt fittings Parapet height: 1,525 mm above finished floor level (FFL) Frame external dimension: 652 x 714 mm Clear window opening: 590 x 528 mm Insulating glazing with gas fill 1 pc. steel external door Construction dimension (width): 875 mm Clear passage width: 811 mm Clear passage height: 2,065 mm Outward opening 1 pc. door stopper Partitions: 2 m interior partition wall Without insulation Coated steel sheet, 0.5 mm, color: white (approx. RAL 9010) 1 pc. internal door Construction dimension (width): 875 mm Clear passage width: 811 mm Clear passage height: 2,065 mm 5 m WC partition wall 3 pcs. WC partition doors, 625 x 2,000 mm Electrical Equipment: 3 pcs. single socket outlet 1 pc. single socket outlet, 350 mm above finished floor level (FFL) 1 pc. double switch 1 pc. double switch Moisture-proof electrical installation 1,150 mm above finished floor level (FFL) Sanitary Equipment: 2 pcs. ceramic hand basins, 500 x 410 mm Incl. single-lever mixer tap Incl. metal mirror Incl. metal hooks Incl. soap dish 3 pcs. WC cubicles incl. toilet and toilet paper holder 2 pcs. floor drains 2 pcs. GRP shower cabins Incl. single-lever mixer tap Incl. shower curtain 1 pc. 300-liter boiler 1 pc. pressure reducing valve 1'' Heating, Ventilation, Cooling Equipment: Djdoyyw R Hopfx Abvowb 3 pcs. exhaust fans, 170 m³ 2 pcs. 2 kW fan heaters