Used Pasturization Unite for sale (28,778)

Condition: new, Folding Machine NEW special for pharmaceutical folding similar to stahl T 36 machines Min folding 20 mm Machines can offer in format 360 mm or 470 mm Machine from 2 buckles to 12 buckles in one unit Stacker vertical delivery option Technical details : -Model 360 -Format max 470 x 850 mm -Format min 50 x 85 mm -Min folding 20 mm Gsdpfxsd Nfnve Ag Ejtt -Max Speed 180 mt /min -Thickness paper 40-250 grms -Weight 1500 kg -Stream belt delivery -Antisound covers

Condition: good (used), Used stainless steel tank Last use: pharmaceutical Item number: 10717 Volume: 300 liters Type: Standing on 3 feet Height of feet: 780mm Material (wetted): 1.4571 / AISI316 Type: Single wall Working pressure according to nameplate: ATM Max.operating temperature: 100°C Tank dimension: Outer diameter: 700mm Total width: 810mm Total length: 885mm Total height: 2100mm Cylindrical height: 800mm Materials: Interior: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Facilities: Gtodpsicnurjfx Ag Eet Nameplate: yes distance drain to floor: 510mm Outlet diameter: 47mm Various nozzles

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10700049, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 320 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 14, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 828 D X-axis travel: 450 mm Y-axis travel: 300 mm Z-axis travel: 320 mm Table Table length: 500 mm Table width: 350 mm Table clamping area: 450 × 300 mm Table load: 150 kg Number of T-slots: 3 T-slot spacing: 100 mm Spindle Spindle speed: 10,000 rpm Tool holder: SK 30 / BT 30 Spindle cooling: 25 bar internal cooling Rapid traverse and feed rate X-axis rapid traverse: 48 m/min Y-axis rapid traverse: 48 m/min Z-axis rapid traverse: 36 m/min Working feed rate: 12,000 mm/min Tool magazine Tool changer: 14-station Tool holder included: 20 × SK 30 Max. tool diameter: 90 mm Gtodpfswd Sp Sex Ag Est Max. tool length: 200 mm Max. tool weight: 3 kg Chip-to-chip time: 2.8 s MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 20 A Connected load: 15 kVA Weight: 2.4 t EQUIPMENT - GRUNDFOS coolant pump - Cooling unit - 20 SK 30 tool holders included

Condition: used, The COVERTEK machining center is suitable for processing solid and glued wood beams. They are used for the construction of frames and roof structures. * Portal with mobile positioning trolleys; * Machining of 6 sides without rotation of the piece; * Dual 5-axis working unit with 12-position HSK-E63 tool holder; * N° 2 spindles of 17 kW each; * Data imported from CAD/CAM programs Technical specifications * Workpiece width: min. 100 mm - max. 600mm; Gtodpstz H Egjfx Ag Eot * Workpiece thickness: min. 70 mm - max. 300mm; * Workpiece length: max. 13000mm; * Blade diameter: 640 mm; * Feed speed: max. 80 m/min.; * Software type: TPA ALBATROS EDICAD; * Automatic centralized lubrication; * Liquid cooling of the spindle; * Certification CE; * Total connection: 70 kW TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE IN THE WAREHOUSE

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Godpjg A D Ansfx Ag Estt Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04006, For sale is a stretch wrapping machine with a conveyor belt and scale. The machine was in the shipping department. Several programs can be started directly on the machine or via a cable switch (operated from the forklift). Process: Gedpfx Agowl Hp No Estt The package is placed on the roller table of the machine by a forklift. The machine starts at the push of a button, is wrapped automatically, the film is separated, the package moves along a roller conveyor to the unloading station, and is weighed. The package is unloaded from the unloading station by a forklift. All information is provided without guarantee. Sale to commercial customers only. Viewing by appointment in 94424 Arnstorf (Germany). Pickup in 94424 Arnstorf (Germany).

Condition: new, Laminator 380 Plus - Automatic feeder with suction head - Infeed stacker - Automatic sheet separator - Film rewinding device (including cutting and rewinding knife) - Chrome-plated laminating roller - Touch screen - Anti curling system - Cooling fans for cooling after calendering - Stamping system including rewinder for waste foil - Hydraulic pressure of laminating roller Technical features: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 - 42 μm Film spindle axis: Ø75 mm Maximum film roll diameter: Ø340 mm Material weight: Digital printing paper: 135 - 350 g/m² (135 - 350 g/m²) Other paper: 157 - 350 g/m² (157 - 350 g/m²) Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Gtedsr Axv Hjpfx Ag Ejt Upper lamination roll diameter: Ø120 mm (chrome-plated and polished) Lower lamination roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC - 50 Hz Weight: 305 kg Dimensions (length x width x height): 1730 x 800 x 1480 mm

Condition: excellent (used), Year of construction: 2016, Field X 4250mm Field Y 2210mm Field Z 1000mm Gjdpfx Agowq Ir Ne Estt Motor 9.6Hp Tool changer 10 positions Drilling head 10 + 4 + 2 2 Pumps x 250mc in total 500mc

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total width: 3,400 mm, total length: 250 mm, total height: 1,900 mm, Equipment: documentation/manual, Unitec sortieranlage Gtodsxwmtcepfx Ag Eet

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Tool travel : 0-315 mm Strokes per minute : 14 - 60 Gtedpfxjvfctfs Ag Eet Ram adjustment : 235 mm Swivel angle of head : ±45° Head to table distance : 510 mm Tool to column distance : 460 mm Diameter of rotating table : 450 mm Diameter of central hole of rotating table : 80 mm Number of fixed positions of rotating table : 24 Longitudinal travel of worktable : 265 mm Transverse travel of worktable : 200 mm Self-breaking main motor : 4 kW / 5.5 h Weight : 1310 kg Overall dimensions : 1000 x 1500 x 2250 mm

Condition: new, Technical data: Working width: 1100 mm Gsdpfx Agegtm U As Ejtt Sanding belt dimensions: 1120x2150 mm Max working height: 160 mm Calibrating steel roller with a diameter of 150 mm Rubber roller with a diameter of 150 mm Sanding pad width: 50 mm Common motor power of 2 grinding aggregates: 11 Kw Speed of sanding belts: 16/18 m / s. Feed motor power: 0.55 kW Infinitely adjustable feeding belt: 4-20 m / min Worktable motor power: 0.25 Kw Pneumatic shoe for jump / jump: YES

Condition: used, Technical data: Gedpfx Agsri Sm Ds Eett Working width: 1100 mm 1 Steel calibration unit Shaft diameter: 210 mm 2 Rubber aggregate Shaft diameter: 210 mm Workpiece height: 160 mm Infinite speed of the feeding belt Extraction spigot diameter: 160 mm Electric lifting Digital display Safety switch Main motor power: 13 kW Voltage: 380 V Overall dimensions: Length: 1770 mm Width: 1580 mm Height: 2100 mm

Condition: used, This listing is for a LTE Scientific Unitemp filtered air drying Cabinet The unit is in full working condition and is ready for immediate release LTE Scientific Unitemp Filtered Air Drying Cabinet Gtjdsxv D Eyspfx Ag Est The LTE Scientific Unitemp Filtered Air Drying Cabinet is designed to provide a controlled, contamination-free environment for drying laboratory equipment. Featuring a fine filter on the air intake, it minimizes particulate contamination, ensuring that freshly washed items remain clean throughout the drying process. Key Features: Capacity: 534 liters, offering ample space for various laboratory drying needs. Temperature Control: Thermostatically controlled with a range from 5 °C above ambient to 65 °C, protected by an over-temperature cut-out device for safety. Air Circulation: A fan circulation system ensures even heat distribution for consistent drying. Construction: Toughened plate glass door for easy monitoring and access. Additional Drying Cabinet Options: Economy Drying Cabinets Large capacity cabinets available at an economical price. Heaters are positioned at the bottom of the cabinet below a perforated base plate and vent through the top. Fan extraction models enhance drying efficiency by actively drawing air through the chamber. Temperature is controlled via a regulator.

Condition: used, Z-bone compressor and slotting machine WEINIG UNITEC 10 from a UC-Matic window system, not in operation. * Year of manufacture: 1997 * Sütron BT20 control * Machine incomplete * Details on request. Gtodpow I Db Hofx Ag Est

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Display range: 0–999.9 V rms Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Resolution: 0.1 A Gtjdpfx Asx A Imzsg Eet Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - User manual - 4 current clamps - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.

Year of construction: 2012, condition: excellent (used), Window production line WEINIG consists of: Unirex 3000 machining center Univar 15 Unitex 15 Gtodjh H Iyxopfx Ag Eot

Condition: good (used), Relay, contactor, semiconductor contactor, contactor -Elero: Uni-Tec 868 wireless wall transmitter -Application: roller shutters, awnings blinds, special applications -Price: per piece -Number: 1 pieces -Dimensions: 81x81x22 mm (LxWxD) Gedpofmy Hvefx Ag Eott -Weight 0.1 kg/piece

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Gjdpfx Agemgc I Nj Ejtt Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Year of construction: 1998, condition: excellent (used), I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Gtjdpfjfzzhysx Ag Eot Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Year of construction: 1997, condition: excellent (used), Window making machines WEINIG automatic tapping and slotting machine UNITEC 10, year 1997 Gtodpfx Ageiix Uve Eet profiling and milling machine UNIVAR 10, year 1997

Year of construction: 1997, condition: excellent (used), I sell the complete window profile production line: 1pc. 5-spindle fourside moulder with saw aggregate Weinig Unimat 23EL. - without HESS sanding machine - another machine for change available on agreement 2pcs. tenoning profiling centre Weinig Unitec 10 Gedpefzzidjfx Ag Ejtt 2pcs. profiling automat centre Weinig Univar 10 1pc. CNC drilling machine KOCH WinDoor - set of complete Weinig automation feeders and conveyors Year 1997. Profile heads OERTLI. Available immediately. Uninstalled and loaded on original Pallets. Condition very good !

Year of construction: 1998, condition: excellent (used), I sell the window tenoning profiling centre Weinig Unitec 10 Year 1998. Moulding heads OERTLI. Available immediately. Godpfx Ajfzzhkjg Estt Unit price 8.500 euro. 3 pcs. available. Condition very good !

Year of construction: 2016, condition: used, New: No Field of application: Freight transport Serial number: 60xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21845 Specifications: Model year: 2016 Volume: 30 m³ Length: approx. 6 metres Manual tarpaulin, may need some maintenance Hook-lift frame Option to purchase three units Gjdsx Evprjpfx Ag Estt Ready for delivery Technical approved: no Own weight: 11 Model: 2016 UniTeam Væsketett Container m/ Manuelt kapell.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0-250-05-2654, travel distance X-axis: 3,950 mm, travel distance Y-axis: 1,943 mm, travel distance Z-axis: 400 mm, controller model: HOMATIC-2000 IPC, No reserve price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel distances X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical drilling unit X-direction Drill spindles: 16 Z-stroke: 60 mm Drilling depth: max. 38 mm Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drive: 1.5 kW Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical drilling unit Y-direction Drill spindles: 15 Z-stroke: 60 mm Drive: 1.5 kW Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drill chuck: d= 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Arrangement: Y-direction Horizontal drilling unit X-direction Drill spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: counterclockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal drilling unit Y-direction Drill spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: clockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Router motor Drive power: 7.5/10 kW (S1/S6 duty cycle) Speed range (stepless): 750 - 18,000 rpm Cooling: liquid recirculation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool changer magazine Magazine positions: 30 tool positions Tool weight: max. 5 kg Tool change time: approx. 8 - 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC Liquid recirculation cooling: 18,000 l/min Power: 7.5 / 10 kW S1/S6 operation Gjdpfsx Sqm Ssx Ag Ejtt EQUIPMENT Integrated CNC axis (360° rotational) Torque support Main spindle (motor power 7.5 / 10 kW, HSK F63) Workpiece support system 1,500 mm Workpiece console K-table 1,500 mm Gantry extension Y-direction 120 mm Compressed air connection strip with quick couplers Extraction hood for additional router motor Router 5 kW with Hydro quick-release clamping system Left-side safety guard with door Safety tread mat 3,250 mm Control cabinet left Note: For further details regarding the machine’s equipment, please refer to the attached documents.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 487 mm, Original purchase price of the printer was €486,000 EUR net! TECHNICAL DETAILS Gsdpfx Agox Ezgpo Estt Print resolution: 2,400 × 2,400 dpi Print speed: 100 images per minute Recommended monthly print volume: 100,000 – 450,000 pages Maximum monthly print capacity: 1,500,000 pages Supported paper sizes (min.): 182 × 182 mm Supported paper sizes (max.): 330.2 × 487.7 mm Paper weight range: 60 gsm to 350 gsm Paper weight range (when validated): up to 400 gsm Duplex printing media weight: 350 gsm MACHINE DETAILS Standard paper feed capacity: 1,000 sheets Total capacity expandable up to: 10,000 sheets Dimensions main unit C10000 (H x W x D): 145.5 cm x 258.6 cm x 115.3 cm FEATURES Offset-like print quality Suitable for specialty and textured media In-line color management sensors Automatic calibration