Used Oil Water Separator for sale (18,246)

Condition: good (used), Water jet high-pressure pump, high-pressure pump for water jet cutting, water jet cutting, water jet cutting system, pressure boosting cylinder, pressure boosting Bdodpfx Akszfgb Ajioi -Manufacturer: Deter Fluidtechnik, high-pressure pump for waterjet cutting with water tank and feed pump -High-pressure pump: Type PP1205/110V -Centrifugal pump: Calpeda NM 1/AE -Container: Stainless steel -Individual components: see photos -Dimensions: 1580/410/H600 mm -Weight: 118 kg

Condition: new, Year of construction: 2010, functionality: fully functional, new, unused water treatment system (new in the original packaging) VEOLIA MIDI-RO 10-750-EP Bdodpfx Akjzdri Neiji year of manufacture 2010 500 liters/hour energy-efficient reverse osmosis system

Condition: used, The machine is in good working order and ready for use. It was previously used in a company that specializes in vegetable washing. Bdodpfozc Ef Aex Akiei The machine was used to pre-treat wastewater. Please check out my other listings.

Condition: used, Rittal TopTherm Air/Water Heat Exchanger SK 3209500 Rittal air/water heat exchanger for switchgear cabinet climate control. Unit manufactured in 2019. A total of 3 units are available. Manufacturer: Rittal Series: TopTherm Type: SK 3209500 Device type: Air/water heat exchanger Condition: used Supply voltage: 230 V AC Frequency: 50/60 Hz Phases: 1~ Bdedpfx Aezdafgjkioi Rated current: 0.40 A at 50 Hz Rated current: 0.48 A at 60 Hz Power consumption: 0.095 kW at 50 Hz Power consumption: 0.110 kW at 60 Hz Useful cooling capacity: 2.50 kW Cooling capacity measurement point: L35 / W10 Coolant flow rate: 400 l/h Operating temperature range: 1 °C to 70 °C Coolant: Water Maximum coolant temperature: 30 °C Operating pressure: 0.1 to 1.0 MPa Operating pressure: 14.5 to 145 psi Protection class: IP55 Weight: 23.5 kg

Condition: used, machine/vehicle number: WW12699, Product information "Oil mist filter Filtermist FX5002" Oil mist filter Filtermist Type/Model: FX5002 Condition: Used Technical data Air flow rate: 1675 m³/h (at 50 Hz) Motor: 1.5 kW / 400 V Dimensions (L x W x H): approx. 600 mm x 420 mm x 780 mm Weight: approx. 39 kg Inquiry item! Shipping costs will be provided in a separate quote. Bodpfx Aozm Itvekiodi

Condition: like new (used), Year of construction: 2026, functionality: fully functional, TRI OPTIQUE Manufacturer: PELLENC Type: M 2800 BB HR Working width: 2,800 mm Option installed in June 2024: separator for all types of metal, including stainless steel, metal sensor. New belt. The machine is capable of sorting all types of plastic by quality, all metals including stainless steel, and wood. The machine has just been serviced. Feeding system: Manufacturer: SINEX Type: MU 75 6500 Power: 2 x 3 kW Output conveyor 1: Manufacturer: RMIS Bdedpfx Akoyy Aa Tjisi Output conveyor 2: Manufacturer: ARVAL

Condition: used, functionality: fully functional, The Paddy separator machine is suitable for sorting grains such as rice, coffee, wheat, barley, oats, seeds, pulses, etc., and performs sorting based on the difference in specific weight. This machine can be adapted to all products through three adjustments: speed, inclination, and movement of the hopper. The external structure is metal, while the internal parts in contact with the material being processed are made of stainless steel. Bdjdpfx Aksyzqydjisi

Condition: used, machine/vehicle number: LC600, Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automation & Control SystemsThe line benefits from a modernized conveyor and control system, with the conveyor management and electrical panels refurbished in 2010–2011. This upgrade improves synchronization between modules, enhances safety interlocks, and supports stable high-speed performance across forming, filling monoblock, labeling, and packaging stations.Refurbished conveyor control and electrical panels in 2010–2011Integrated interlocks for safe operation at high throughputNon-combi architecture simplifies maintenance and phased upgradesProduction Line Integration CapabilitiesEngineered as a complete production solution for water bottling, this second-hand bottling equipment integrates seamlessly from blow molding to end-of-line palletizing. The non-combi layout enables independent operation and optimization of the blow molder and filling monoblock, facilitating changeovers and maintenance without halting the entire line.Inline flow: Blow molding → Filling Monoblock → Labeling → Shrink wrapping → Handle application → PalletizingConveyor system reworked for reliable accumulation and transferSuitable for sparkling and still water applications in PETMachine Condition & Maintenance HistoryThis used bottling line has benefited from targeted upgrades to the conveyor management and electrical panels completed in 2010–2011. A key highlight of the line is the Sarcmi 70-10 ISO Filling Monoblock, which, despite its original 1988 manufacture, has been completely overhauled in 2025 to ensure peak operational reliability. The line is described in working configuration and is presented as a ready-to-run second-hand industrial packaging solution.Filling Monoblock Sarcmi 70-10 ISO: Overhauled in 2025Conveyors and electrical panel management refurbished: 2010–2011Well-known OEM components across the lineReady for operation with existing 0.5L PET water setupOperational Performance & VersatilityOptimized for beverage production with a focus on water, the line manages both still and carbonated profiles effectively. The Si... Bsdeyk E Srepfx Akiodi

Condition: ready for operation (used), functionality: fully functional, fuel: diesel, For sale: 2 oil-powered high-pressure cleaners, including accessories, extraction system, oil tank, and remaining oil. Bedpfx Ajzvc A Rjkiedi The system is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. Location: Neusäß, near Augsburg. Condition and dimensions can be seen in the pictures.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 12 276 / REV 13 976, power: 30 kW (40.79 HP), overpressure (max.): 0.5 bar, tank capacity: 110 l, No minimum price – guaranteed sale to the highest bidder! The distillation unit underwent an overhaul in 2024. TECHNICAL DETAILS Capacity: 110 l Water jacket volume: 180 l Operating overpressure: 0.5 bar Heating method: Electric heating elements Bsdpezzmk Aefx Akiodi MACHINE DETAILS Machine type: Column still with water jacket Power: 30 kW

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: TEG802P3-20 - 2200415661, cooling capacity: 152 kW (206.66 HP), type of cooling: water, overall weight: 2,192 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, pressure: 6 bar, temperature: 7 °C, volume flow: 25.9 m³/h, pump pressure: 3.15 bar, total width: 1,250 mm, total length: 3,535 mm, total height: 2,151 mm, warranty duration: 12 months, protection type (IP code): IP54, Equipment: cooling unit, type plate available, Sales exclusively to customers with a German billing and delivery address! Process chiller/cooling unit/chilled water set, air-cooled, Type: TAE G 802 P3-20 (R454B) MTA S.p.A. TAE G 802 P3-20 are air-cooled, compact water chillers suitable for outdoor installation (from -20°C to +46°C). Includes crankcase heater, phase monitoring, buffer tank 950 liters, integrated P3 circulation pump, and winter package -20°C. Chilled water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 152 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h) 25.9 Available pump pressure (bar) 3.15 Ambient temperature (°C) 32 Refrigerant R 454B Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW) 79 Max. current (A) 142 Starting current circuit (A) 286 Protection class: IP54 Bodpozrw Hpsfx Akisdi Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200415661 Year of manufacture: 2024 Condition: Visually 1, Technically ok (Warehouse stock, as new) Price: upon request Used machines may have visual defects due to their use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2024, battery capacity: 240 Ah, battery voltage: 80 V, total length: 1,023 mm, total width: 710 mm, total height: 402 mm, overall weight: 750 kg, No. 10039 Forklift Battery / Traction Battery EnerSys Hawker Water Less 80V 4 PZM 240 Unused, year of construction 2024, in new condition According to our customer / the previous owner, the battery is fully functional and can be viewed on site Lead-acid traction battery Hawker Water Less system Cell design PzM With central water refilling system / hose system Installed in battery tray Suitable for industrial trucks / electric forklifts Nominal voltage 80 V Capacity 240 Ah (C5) Number of cells 40 pcs. Electrolyte volume 96 l Battery dimensions approx. 1023 x 710 x 402 mm LWH Bdodpfx Aksz Dvn Tjisi Transport dimensions approx. 1200 x 800 x 600 mm LWH Weight approx. 750 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, Desiccant for absorbing moisture, desiccant bag for export packaging. Desiccant according to DIN 55473 for industrial applications, also meets the requirements of MIL-D-3464E. BALESO desiccant bags according to DIN 55473 reduce moisture in packaging and support corrosion protection during transport and storage. ZERUST - EXCOR DIN 55473-B MIL-D-3464E Container size: 16 units according to DIN 55473-B (16 TME) Bedpfjz Dxkksx Akijdi Bag size: approx. 210 x 170 mm, thickness approx. 30 mm Bag net content: 590 g Bag weight: 600 g - Made from 100% natural bentonite (clay) and free from chemical additives - Desiccant bags with dust-proof outer material, type B, made of high-tear-resistant non-woven fabric Always 5 desiccant bags are sealed in one foil bag Weight of one foil bag: 3 kg 9 foil bags in a carton, equivalent to 45 desiccant bags in a carton Carton size: 40 x 28 cm x height 35 cm Carton weight: 27 kg Price per carton with 45 desiccant bags = this corresponds to 720 TME. Pallet quantities available upon request.

Condition: used, Year of construction: 2026, Block cutter BS254 - grit size 0 - 30/35 mm Blocks in the wear zones are welded with armor wire. Currently, an OQ70/55 adapter is installed – not included in the price – available upon request. For excavators from 18 tons / wheel loaders from 10 tons. Cutting width 1200 mm / 4 shafts Capacity 1.50 m³ Throughput / hour 52 - 77 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clods. Bjdpfxozv N E So Akiodi - Aerating, shredding, tearing, and turning biomass, biowaste, and compost while simultaneously separating branches, roots, etc., which cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete blocks, while simultaneously separating smaller pieces in mm, larger and harder parts remain in the separator. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.124 – the bearings are maintenance-free, and the chain housings contain grease that, due to the movement of the blade and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSP.124 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2018, Screening shafts with square discs, separation distance 40 mm Coarse screening - grain size 0 - 45/50 mm Wheel loader attachment for Volvo L50-120 included in the price Wheel loader from 15 t Bedpfozv Rg Rjx Akisdi Cutting width 2600 mm / 3 shafts Capacity 2.60 m³ Throughput / hour 80 - 140 m³/hour Working pressure 280 - 300 bar Oil requirement 200 - 280 l/min The separator crushes clods of earth and separates stones, roots, and branches from still usable soil. Other shafts can also be installed in the separator at any time, thanks to the patented Wolf shaft couplings; conversion time approx. 40 to 60 minutes. The separator is equipped with an overflow protection to increase the bucket capacity and protect against flying stones. The TSP.263 - the bearings are maintenance-free; the chains should be sprayed with spray grease via the maintenance flaps every 20 operating hours. Dimensions and weight without adapter.

Year of construction: 1999, condition: used, machine/vehicle number: LC654, Used ALFA LAVAL oil production lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous production with a throughput of 2 tons per hour. Built around proven Alfa Laval technology, the line combines robust mechanical design with food-grade materials to ensure reliable operation and consistent oil quality. Its modular configuration streamlines the core olive oil extraction steps from washing and preparation through malaxation and separation.Overall capacity: 2 tons/hourDecanter centrifuge: Alfa Laval NX 17Disc separators: Alfa Laval 407, automatic (2 units)Malaxers (double): Stainless steel (3 units)Malaxer (small): Stainless steel, with paste pump P 60 (1 unit)Crusher: Stainless steelOlive elevator: Integrated feedingOlive washer: Pre-cleaning and debris removalElectrical control panel: Alfa LavalConveying: Various screw conveyors for paste and by-productsThe equipment list emphasizes sanitary stainless-steel construction, automated separation, and balanced material handling to minimize oxidation, protect product integrity, and support high-efficiency operation.Advanced Automation & Control SystemsAutomation centers on an electrical control panel that coordinates key process units for safe, consistent performance. Automated Alfa Laval 407 disc separators provide steady clarification with reduced manual intervention. Interlocks and standard operator safeguards support secure running and streamlined start/stop routines. The configuration is designed for straightforward parameter control, facilitating repeatable results across production shifts.Production Line Integration CapabilitiesThe line is configured for seamless integration from raw olive reception to downstream storage tanks and final packaging. Its modular equipment layout connects via screw conveyors, an olive elevator, and a washer, enabling continuous flow into the crusher, malaxers, decanter, and separators. This processing core can be paired with industrial packaging solutions or a used bottling line for vegetable oil filling into PET or glass containers, aligning with broader beverage production and food-oil packing environments.Machine type/categoryManufacturer / ModelYearOlive Washer—Olive Elevator—Olive CrusherStainless steelMalaxers (double)Stainless steel Bedsz E Dibepfx Akiodi

Condition: good (used), Pumpex water pump, 300 m³/h, 7.5 kW Bdjdpfoz Skzaox Akioi

Condition: excellent (used), For sale: an industrial centrifugal pump, KSB ETABLOC-GN 32-125.1/024.1, with a 0.25 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC-GN 32-125.1/024.1 • Design: GN • Pump number: 4-925-104322/2 • Flow rate: 6.0 m³/h • Head: 2.0 m • Pump speed: 960 rpm Motor specifications: • Motor number: 9870132-0090-0003 • Power: 0.25 kW / 0.34 HP • Power supply: three-phase Bdjdpfjz Snuvex Akiei • Voltage: 400/230 V • Frequency: 50 Hz • Speed: 890 rpm • Current: 0.85/1.49 A • cos φ: 0.73 • Protection class: IP54 • Insulation class: F • Duty cycle: S1 • Mounting method: IM B14

Condition: excellent (used), For sale: a used Speck-Pumpen centrifugal pump, type 50/125, equipped with a three-phase Bauknecht electric motor, 4.0 kW. Pump specifications: Manufacturer: Speck-Pumpen Type: 50/125 Part No.: 69807 Manufactured in: West Germany Bsdpfx Aez Snuzekiedi Motor specifications: Manufacturer: Bauknecht Type: RF 4/2-76 No.: 3230192-2 Power: 4.0 kW Voltage: 380 V Current: 8.1 A Rotational speed: 2900 rpm Frequency: 50 Hz cos φ: 0.89 Protection class: IP44 Insulation class: B The pump has been inspected and is fully functional, ready for use.

Condition: excellent (used), For sale: a used KSB ETABLOC-GN 32-125/222 industrial centrifugal pump with a 2.2 kW electric motor. The pump has been inspected and is in full working order. It is in used condition, with normal signs of wear and tear, as well as some localized surface corrosion on the flanges and housing. The photos provide a detailed view of its condition. Pump technical data: Manufacturer: KSB Model: ETABLOC-GN 32-125/222 Design: GN11 Identification number: 48861776 Number: 5-925-204037/1 Capacity: 4–30 m³/h Head: 25–18 m Bdodpfez Snvmex Akiji Rotational speed: 2900 rpm Approximate weight of the complete unit: 39.5 kg Motor data: Manufacturer: KSB Type: OU FA 90L2A-60 Power: 2.2 kW Power supply: three-phase Voltage: 220–240 / 380–420 V Frequency: 50 Hz Rotational speed: 2850 rpm Protection class: IP55 Insulation class: F cos φ: 0.89

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 40-160/552.2 centrifugal pump with a 5.5 kW electric motor. The pump comes from warehouse stock. It is new and unused. The set includes the original KSB carton and operating manual. Pump technical data: Manufacturer: KSB Model: ETABLOC-G 40-160/552.2 Ident-No.: 48862664 Flow rate Q: 7.5–63 m³/h Head H: 35.8–24 m Pump speed: 2900 rpm Design: G11 Motor: Bdsdpsz Sn Aaefx Akiei Power: 5.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Speed: 2880 rpm Protection class: IP55 Insulation class: F Condition: NEW / UNUSED – warehouse stock. The pump is in its original KSB packaging. The operating manual is included. The item for sale is exactly the one shown in the pictures.

Condition: excellent (used), For sale is a vertical, multi-stage KSB Movitec V 4/16 B centrifugal pump with a 3 kW electric motor. The pump is in good visual condition. The unit also bears a service marking from ROCK Elektromotoren Reparaturwerk, indicating a previous inspection/service. Pump technical specifications: Manufacturer: KSB Model: Movitec V 4/16 B ID: Flow rate Q: 4.0 m³/h Head H: 119.1 m Pump speed: 2920 rpm Connection: PN16 Hydraulics: PN40 Seal: SiC/Ca/EPDM Temperature range according to nameplate: up to +120°C Pump year of manufacture: 2012 Motor: Power: 3.0 kW Bjdpez Sn Agofx Akiodi 50 Hz: 2900 rpm Voltage: 400D / 690Y V Protection class: IP55 Insulation class: F Operating mode: S1 Motor weight: 27 kg The item offered for sale is exactly the one shown in the pictures.

Condition: excellent (used), For sale: a KSB ETABLOC-GN 65-160/1102.21 centrifugal pump, equipped with an 11 kW electric motor. The pump is used and in working order. It is in good technical condition and shows normal signs of use and storage. The exact visual condition can be seen in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 65-160/1102.21 Design: GN11 Ident-No.: 48861861 No.: 5-925-204038 / 1 Flow rate Q: 18–143 m³/h Head H: 35.5–22 m Rotational speed: 2900 rpm Motor technical specifications (50 Hz): Manufacturer: KSB Power: 11 kW Voltage: 380–660 / 420 V Current: 20.8–12.0 / 19.0 A Rotational speed: 2900 rpm cos φ: 0.92 Protection class: IP55 Insulation class: F Motor weight: approx. 79 kg Condition: Bdedpfx Akoz Sn R Reisi Used, in working order. Normal signs of wear and tear resulting from previous use and the age of the equipment. Scope of sale: KSB ETABLOC-GN pump with electric motor – exactly as shown in the photos, in the presented condition and configuration.

Condition: excellent (used), For sale is a Pumpen Distel type 50/200 centrifugal pump equipped with an 11 kW electric motor from Antriebstechnik G. Bauknecht AG. The pump is used and in working order. Visually, it is in good used condition and has normal signs of use and storage. The actual condition and completeness are shown in the photos. Technical data of the pump: Manufacturer: Pumpen Distel Type: 50/200 Serial No.: 78756 Flow rate Q: 40 m³/h Pressure: 4.5 bar Rotational speed: 2900 rpm Power: 11 kW Connections: flanged Technical data of the electric motor: Manufacturer: Antriebstechnik G. Bauknecht AG Type: RF 11/2-75 Power: 11 kW Voltage: 380 V Bdedpfx Ajz Sn Sbskisi Current: 22 A Frequency: 50 Hz Rotational speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Insulation class: B Operating mode: S1 Mounting form: B3/B5 Condition: Used, in working order. Has normal signs of use and storage. Scope of sale: Complete centrifugal pump with an 11 kW electric motor – exactly as shown in the photos.

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Rotational speed: 2900 rpm Connections: flanged Motor data: Manufacturer: KSB Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Bjdez Sn Sujpfx Akijdi Insulation class: F Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.