Used Oerlikon for sale (68)

Condition: excellent (used), Year of construction: 1982, Make: OERLIKON Type of machine: FM3 Year of manufacture: 1982 Control system: HEIDENHAIN x-travel: 1300 mm Gjdpfx Aji If N Isaletw Speed range: max. 1120 U/min Control: conventional Machine's weight: 6 t

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 291127, wheel diameter: 275 mm, wheel width: 55 mm, controller manufacturer: Siemens, controller model: 840 C, Face Milling - Single Part Process - Continuous Process: - The workpiece and tool (usually Spiron) rotate simultaneously, and all teeth are machined simultaneously in a single operation. - The cutter head has multiple cutter groups (not arranged in a circle) - Parallel tooth height - Conical tooth tip surface Single Part Process: - The workpiece is stationary, and the tool (usually Arcon) rotates and cuts a tooth by plunging the tool. - Once a tooth is cut, the tool moves back out of the tooth, the workpiece continues to cut by one tooth width, and the next tooth is cut until all teeth are finished. - The cutter head has all cutters arranged on a circular path. - Conical tooth height - Parallel tooth tip surface The C28 can handle both gear and pinion. For the single part process, a C28 must be "prepared" - i.e., a direct measuring system + part gear brake, workpiece axis + license file for manufacturing single part processes. TECHNICAL DETAILS Control: Siemens 840 C Wheel diameter: max. 275 mm Wheel width: 55 mm Module: 1.5 - 6.5 Helix angle: 0-60° Number of teeth: 6-120 mm Gear ratio: 1:10 - 1:1 Cutter head radius: 62 - 110 mm Number of knife groups: 5-19 (Oerlikon) Travel X / Y / Z: 500 / 885 / ±185 mm Motor speed per axis: 2400 rpm Ratio X / Y / Z: 3:1 Spindle pitch per axis: 10 mm Movement range E / V-axis: -5° to 95° / ±7.5° Motor speed E / V-axis: 400 / 900 rpm Travel E/V-axis: 1800 / 1098 °/min E/V-axis gear ratio: 80:1 / 1:1 A/B-axis mounting diameter: 130 / 140 mm A/B-axis spindle speed: 667 / 345 rpm Permissible A/B-axis motor speed: 10,000 / 4,500 rpm A/B-axis gear ratio: 15:1 / 13:1 Gtjdpfsv I Ud Isx Aalew V1-axis travel: 85 - 225 mm V1-axis travel speed: 6 m/min V1-axis motor speed: 1800 rpm V1-axis spindle pitch: 5 mm U-axis travel: 112 - 258 mm U-axis travel speed: 0.6 m/min U-axis gear ratio: 4.3:1 U-axis motor speed: 3000 rpm U-axis spindle pitch: 5 mm MACHINE DETAILS Weight: 13 t Space requirement: 5.2 x 2.3 x 2.4 mm Power requirements: 3 x 400V, 50 Hz, 90 A Transport weight: 16.5 t

Condition: good (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 400 V, ground cable length: 5,000 mm, type of cooling: water, TIG welding unit, water-cooled, DC/AC power source CITOTIG 350W AC/DC Godpfex A S Txex Aalotw Welding current range 3...350A DC / 10...350A AC with 5m power cable with plug for mains connection 3 x 400V - Gas hose 1.5m - Ground cable with fixed clamp 5m, 50mm2 - Transport trolley TY2A - Coolant FREEZECOOL 10l - TIG torch CITORCH T 35W EB C5B, 5m water-cooled - TIG torch CITORCH T 10W EB C5B, 5m water-cooled - Argon / CO2 pressure regulator

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm Gjdpfx Aajhcnhmjljtw - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Year of construction: 2000, condition: good (used), machine/vehicle number: 84061, Offer 22629 - air-cooled direct - alternating current - unit, mobile - for welding of all weldable metals - e.g. stainless steel, steel, aluminum, brass, etc. - Welding current TIG infinitely variable from 20 A to 270 A 35% ED - A 100% ED - Connection 400 V - with: - Digital welding current display - Frequency control of the arc - HF - ignition - pulse device - hose package 5 m - pressure reducer - ground cable - trolley Gtodpfsixp D Uox Aalew - Space requirement approx. W 550 x H 1150 / 1300 x D 950 mm - Weight approx. 180 kg

Year of construction: 2009, condition: good (used), machine/vehicle number: 4495678, Offer 18336 Portable TIG-DC welder on transport cart Technical data: - TIG - DC + electrode welding - Welding current infinitely variable for TIG welding from - 5 A-10.0 V to 150 A - 22 V 35% ED - 100 A 100% ED - connection 220 V / 50 Hz 15 A - with: Gtsdohq T N Depfx Aalew - 2 cycle 4 cycle - function - HF- ignition - Welding current descent adjustment - gas pre-flow regulation - gas post-flow regulation - hose package 4,5 lfm, light version - ground cable - pressure reducer - Space requirement approx. W 200 x H 300 x D 500 mm - weight approx. 10 kg - Transport trolley with gas bottle storage space W 550 x H 900 x D 560 mm - Weight of transport trolley approx. 10 kg

Condition: refurbished (used), Oerlikon Leybold Vacuum ScrewLine SP630 refurbished Gsdpfex Hh Agsx Aaletw

Condition: used, Excellent welding quality with advanced processes and capabilities • New inverter generation with 30% lower power consumption compared to conventional devices. This performance results in significant energy cost savings. • Over 100 synergy curves for almost all base materials (factory-equipped) • Wide process variety: - MIG/MAG Standard - MIG/MAG Pulse Godpfx Aewwtwdjaletw - MIG/MAG Special Arc Types - MIG Brazing - Manual Metal Arc Welding (basic, rutile, cellulosic) - Gouging with up to 8.0 mm electrode diameter • High-performance machines with up to 500 A at 60% duty cycle • Automation interface A1, no additional cards required for simple, analog integration • 99 memory slots • Password-protected parameter locking (fine adjustment within +/-20% still possible) • Program selection via torch button • Simple polarity change

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. Gsdsx Aqa Depfx Aalotw DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum.

Condition: used, Year of construction: 2002, crown gear diamter max. 500 mm distance crown gear spindle - front pinion spindle 150 - 350 mm distance pinion spindle - front crown gear spindle 120 - 340 mm control GE FANUC Series 160i-M 70 mm pinion turning speeds max. 0 - 3.000 mm crown gear turning speeds max. 0 - 2.600 U/min inner taper pinion spindle Ø 99,2 mm inner tape crown gear spindle Ø 99,2 mm rated current 30 A weight of the machine ca. 6,40 t dimensions of the machine ca. 2,40 x 2,20 x 2,10 m Gedpfjvxwpuox Aalstw Own lapping system included Was also operated at a lapping center

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Gedpsv I U Hcefx Aalstw Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Sold without cutting table.

Year of construction: 2001, condition: as good as new (ex-display), Not used, dismantled from the production line Gedpfx Aohtzn Ejalstw

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad Gtodpfx Aasvxwxcslsw speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: used, 800040V1444, TURBOVAC T1600, Oerlikon Leybold turbomolecular pump Gtedpfx Aaerf U Trelsw Model: 800040V1444 Type: TURBOVAC T1600 Condition: Used Note on condition: free of contamination

Condition: as good as new (ex-display), 844224V0002 + 400000250 + 400000801, COOLVAC 1500 + RGD 7/25 / COOLVAC 1500 + RGD 7 25 / COOLVAC1500 + RGD725, Oerlikon Leybold vacuum cryopump - as good as new Model: 844224V0002 + 400000250 + 400000801 Type: COOLVAC 1500 + RGD 7/25 Gtsdpfx Aoq S Twgoalew Condition: as good as new

Condition: as good as new (ex-display), 844224V0004 + 400000250, COOLVAC 1500 / COOLVAC1500, Oerlikon Leybold vacuum cryopump - as good as new Model: 844224V0004 + 400000250 Type: COOLVAC 1500 Condition: as good as new Godoh Igffepfx Aalstw

Condition: good (used), Year of construction: 2006, voltage 110 - 230 V frequency 50 - 60 Hz Power connection 0,5 kVA Gedpfx Aasymfz Sslstw weight 150 kg dimensions of the machine ca. 1,0 x 0,8 x 1,75 m Stick blade profile control unit - Control via PC control with Windows XP operating system - Digital drive amplifiers, linear motors and measuring systems - Fully automatic position determination of the cutting edges and axis position of the stick blade - Measurement of almost all single-part and continuous processes required for spiral bevel gears and hypoid gears - Machine concept designed for the shortest set-up and changeover lines and maximum measuring accuracy - Combination probe for measuring tip and surface measurement - Integrated drawer for accessories - Keyboard integrated in flat drawer - Operating elements and PC protected against unauthorized access with lockable cabinet element

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and Gtsdpew N S E Aefx Aalew easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data