Used O Wire Punch for sale (6,213)

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 square perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Pedpfox A Sd Dsx Aa Eorf Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Weight: 400 kg

Condition: used, power: 294 kW (399.73 HP), overall weight: 78,000 kg, Year of construction: 1997, operating hours: 11,280 h, machine/vehicle number: 72653, Backhoe excavator with digging bucket, extensive documentation available Prsdpfxot S H A Ho Aa Ejf

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 19,295 h, Equipment: cabin, gripper hydraulics, Used O&K MH 6.5 material handler. - Year of manufacture: 2003 - Operating hours: 19,295 - Issues with throttle regulation. The multi-shell grab is not included in the offer and will not be sold with the machine! Prjdpfxexvbh Se Aa Eof

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Pjdpfx Aajmk S Slj Eerf Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: used, Year of construction: 1988, operating hours: 2,360 h, Equipment: soot filter, Ref. No.: B - 02 * O&K * RH 6 * Crawler chassis * with vibratory hammer * approx. 2360 operating hours * fully functional Trade-in possible Financing from 4.99% Subject to errors and prior sale! The information in this listing is non-binding descriptions and does not represent guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Listed equipment should be checked separately. All information in the listings is non-binding! Delivery available throughout Germany upon request Opening hours: Monday to Thursday from 9:00 am to 5:00 pm, Friday from 9:00 am to 2:00 pm, and by appointment! Pjdpoxvf S Ijfx Aa Esrf

Year of construction: 2012, condition: ready for operation (used), A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible. Prodpfx Aexrf I Uja Eef

Condition: used, gr. working width: 1100 mm for sheet thickness (steel sheet) up to approx.: 1 mm electr. drive: 380 V, 0,75 kW space requirement: 2330 x 600 x 1140 mm weight: 357 Predpfx Aajcaxvho Ejf

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate Pjdpfxjq Rxz To Aa Eorf -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Condition: good (used), Double-toggle jaw crusher Pjdpfx Ajv Rp N Roa Eorf Manufacturer: O&K Jaw width: approx. 1,000 x 850 mm In stock

Condition: used, Cooling unit, cooling water chiller, water cooler, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity approx. 6 kW Nominal power of cooling unit: 3 kW Refrigerant R422D Water tank capacity approx. 35 liters Circulation pump flow rate: 40 liters/min Prsdpfepu R Ncsx Aa Eof Pump power: 0.63 kW Water connections: 1/2 inch Power supply: 380 volts, 50 Hz - Temperature adjustment via rotary potentiometer Space requirements: L x W x H 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Micomat 250 Prodpfx Aaoxc Tw Se Esf - 40-250A welding current - Shipping available at extra cost

Condition: used, functionality: unexamined, spindle bore: 81 mm, turning diameter over bed slide: 650 mm, center height: 320 mm, turning length: 1,500 mm, Used lathe, see pictures. With Sony digital readout and 660mm faceplate. Year of manufacture: 1976. Psdpewm Rvisfx Aa Eerf All technical specifications in the last picture. NOTE: The type plate states XD500, but it is actually an XD630, according to the dimensions and delivery note. Center distance: 1500 Trajectory length: 2500 Center height: 320mm With taper turning direction, side guide

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Pjdpfet Hw D Dox Aa Eorf Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction Predpfjk Aubqsx Aa Eof -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg

Condition: used, Ex-Cell-O XG620 Prodeurt Tlopfx Aa Ejf Excello XG 620 Siemens CNC overhauled 2011 docs available ball groove milling for CV constant velocity joints - homokinetic joints This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Condition: used, 3 x O+K V25 for restoration and repair Year of manufacture: 1980, 1982, 1984 Not drivable / not operational Pjdsw U H Ezspfx Aa Eerf Loading possible "SUBJECT TO ERRORS, TYPOGRAPHICAL MISTAKES AND PRIOR SALE"

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Prodpfx Ajd Nw Ttsa Esf Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, BROWARY & DISTILLERIES Sp. z o.o. has been providing professional consulting, design, and implementation of beer and distillate production lines for many years. We produce private label products for our clients and automated drink dispensing systems. Our company’s strength lies in our highly qualified and experienced team of engineers, enabling us to offer comprehensive turnkey project execution. To date, we have designed and commissioned 28 craft breweries and 3 craft distilleries in Poland, produced over 200 private label craft alcohol brands for our clients, and installed 30 DRINK WALL automated drink dispensing systems in hotels and restaurants. We are pleased to offer you a used SALM brewpub brewery. Since 1924, SALM has been producing complete brewing systems. This brewery was manufactured in 2023 for a client in Bucharest and has only brewed 5 batches to date, which allows us to consider the offered installation as practically brand new! The brewery is in perfect technical and visual condition. Below is the full technical specification of the offered brewery: Annual production capacity: 1,100 hl of beer 1. Two-vessel brewhouse, 5.5 hl, stainless steel, A-frame design with Salm Brewmatic 02 computer control system – 1 unit. 2. Copper cladding on the mash tun and lauter tun’s cylindrical sections. 3. Stainless steel brewhouse platforms – 2 units. 4. External wort boiling kettle with atmospheric gas burner, powered by natural gas or propane – 1 unit. 5. Vapour condenser for brewhouse, mash, and lauter tuns, stainless steel, with built-in injection condenser and fan for odorless operation and DMS removal – 1 unit. 6. Two-roller malt mill – 1 unit. 7. Wort cooler – 1 unit. 8. Mains water chiller (for water above 10°C) – 1 unit. 9. Whirlpool – 1 unit. 10. Mobile beer pump – 1 unit. 11. Wort aeration system – 1 unit. 12. Oil-free air compressor – 1 unit. 13. Glycol cooling system – 1 unit. 14. Hot water tank, stainless steel, double-walled with PU insulation – 1 unit. Prjdpfx Asx Aky Dja Eef 15. Brewhouse ladder – 1 unit. 16. UNI tanks, 11 hl, double-walled, 100 mm PU-insulated, built-in cooling jackets, stainless steel 1.4301, 1.0 bar, built-in CIP – 6 units. 17. TÜV certification for the above 6 UNI tanks, with a nameplate on each. 18. Serving tank for finished beer, 3.0 bar, capacity 10 hl, stainless steel 1.4301, PU foam insulated, water-jacketed, horizontal on a frame – 4 units. 19. Electronic temperature control for each UNI and serving tank – 10 units. 20. Control cable with protective hose and screw connection for each UNI and serving tank – 10 units. 21. Full set of piping and fittings for installation on a single surface – 1 set. 22. Set including 1 beer hose (22 m) with fittings and a mini-laboratory. The brewery has a type approval from the Central Office of Measures in Warsaw. On request, we can arrange transportation of the brewery from Bucharest to any country of your choice and handle installation. We will gladly send you more photos, a presentation video of the brewery, and a profitability calculation for running your own brewpub via email.

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 Pedjf Nku Repfx Aa Esrf The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: used, Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift Prodpjl U E Ttofx Aa Ejf -Manufacturer: MO Weidmann, material lift assembly lift -Load capacity: max. 225 kg -Lifting height: max 1.78 m -Equipment: with winch, with standard fork -Dimensions: 1240/690/H2230 mm -Own weight: 76 kg

Condition: used, CNC control, control panel, machining center, server cabinet -I/O Control: control panel -Dell: Desktop KXGVD -Dell: Optiplex 390 Tower Pedpfx Aofkq T Tsa Esrf -Dimensions: 505/640/H1600 mm -Weight: 72 kg

Condition: used, CNC control, control panel, machining center, server cabinet -I/O: Control panel -Dell: Desktop KXGVD Prsdpfx Aasfkq T Uj Ejf -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, excavator cylinders -Manufacturer: O&K, hydraulic cylinder with control valve stroke 470 mm -Type designation: 1 713 351 1554 541 -Piston rod: Ø 70 mm -Hole diameter 120/60 mm, hole spacing 970/1440 mm -Dimensions: 1160/390/H230 mm -Weight: 99 kg Prjdpfx Aajt H Tqms Ejf

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A Pjdpfx Asfcl H Usa Eerf -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm Prsdpfxjfcl H Ie Aa Esf -Weight: 8.1 kg