Used Mixing Silo for sale (2,607)

Condition: good (used), functionality: fully functional, 1 Used Small Concrete Mixing Plant For example, for precast concrete production Manufacturer: PEMAT Type: 0.5 m³ Aggregate Storage 2 bins 2 separate dosing and discharge conveyors per hopper Mixer: 0.5 m³ pan mixer Dosing: Bljdpfxsyk Ev Rs Agzed Aggregates via dosing conveyors at the hopper 250 kg cement scale 100 l spirit level Cement silos 1 x 40 ton Control: Manual operation / control panel AVAILABLE IMMEDIATELY Location: Northern Germany Offer is net ex works Subject to prior sale, errors and/or misrepresentations excepted Sold as is, without warranty or guarantee, lying down and/or standing up Reproduction, further use, publication and/or copying of this offer is strictly prohibited!

Condition: excellent (used), Wood chip silo with rotary extractor: - 56 panels 1500 x 3000 mm in 2.5 mm thick galvanized steel, distributed over 4 levels, supplied with 56 reinforcements and 42 junctions, bolted assembly, - Ø 6250 mm, - Height 12 m, 350 m3 volume, Blsdpfxoyhpzfe Agzjd - Self-supporting roof with safety railing, - Caged ladder with a resting platform at 6 m, - 12 Atex vents, - 1 inspection door on the roof, - 1 Ø 480 mm inlet on the roof, - 1 discharge door 1200 x 2000 mm - 1 DENIS ECR 240 rotary extractor, all disassembled and palletized. OR - Silo without extractor for €30,000 excl. VAT - DENIS ECR 240 extractor for €15,000 excl. VAT

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, Year of construction: 2025, Equipment: ABS, New vehicle! Available for rent, purchase, or rent-to-own by agreement! 54 m³ Kempf grain tipping semi-trailer with sluice / 3 compartments / unladen weight only 6,750 kg! _____ * Manufacturer: Kempf * Model: SKM 36/3 AK – High-performance sluice tipper with 3 compartments * First registration: – (NEW) * Capacity: approx. 54 m³ (10.00 m long x 2.43 m wide x 2.20 m high) * Gross weight: 36,000 kg * Unladen weight: approx. 6,750 kg * Payload: approx. 29,250 kg * Axles: 3x SAF axles / 1st axle liftable / disc brakes * Tyres: 385/65 R22.5 NEW on Alcoa Dura-Bright rims * Suspension: Air suspension with lift/lower function / rapid discharge * EBS Wabco * Kempf 400 high-performance steel sluice, throughput capacity 30–40 m³/h * 2 partition walls with 3 locking positions, sliding in overhead rails * Transverse auger installed at the end of the loading floor * Storage box for conveyor hoses on the right (hoses not included) * Combination door (swing + double-wing door (2/3 + 1/3)) * Pneumatic 4-hook locking system * Doors 1/3 to 2/3 division * 1x grain shutter with funnel/dust sack * Fifth wheel height from 1,170 mm to 1,230 mm * 1x approx. 4.00 m ladder * 1x water tank * 1x air connection, rear left * 2x toolboxes, 660x500x460 mm * 1x control box, rear right * Single wheel mudguards * Drop legs, aluminium * Operator platform at the front * Sliding tarpaulin with central locking * 3x tarpaulin support bows * Load manometer Blodewuyx Aopfx Agzed * Shovel and broom holder * Dual round LED three-chamber tail lights * 1x LED work light, left * 1x LED work light, right * 1x LED interior lighting with switch * Body finished in RAL 9007 grey aluminum, chassis RAL 9005, tarpaulin colour dust grey * Air tanks made of aluminum * 4 m aluminium ladder * Tyre pressure monitoring system * Access steps inside front bulkhead * Floor, 6 mm New vehicle! Rental option also available!

Condition: used, This listing is for a Sartorius Stedim Palletank Cubical Jacketed-Mix 200L Storage Tank. The unit is in full working condition and is ready for immediate release. Unit is supplied with x2 Sartorius 200L STD Plastic Palletank and dolly. The Sartorius Stedim Palletank Cubical Jacketed-Mix 200L is a high-performance storage and mixing solution designed for biopharmaceutical applications. Engineered for compatibility with Sartorius single-use mixing systems, this temperature-controlled stainless steel tank provides efficient liquid handling, precise temperature control, and optimized mixing performance. Key Features: - Jacketed Temperature Control – Ensures precise heating or cooling for sensitive bioprocess applications. - 200L Capacity – Ideal for medium-scale liquid storage and mixing in GMP environments. - Ergonomic Design – Front doors allow for easy bag installation and port gates facilitate tubing and sensor integration. - Integrated Pro Mixer Compatibility – Railed port enables quick coupling of the mobile Pro Mixer drive unit in under a minute. - Optimized Draining System – Sloped bottom board ensures high product recovery without manual bag manipulation. - Weighing Function Option – Allows for precise volume control, preventing aggregate formation and ensuring product quality. - Visual Inspection Windows – Side windows enable real-time process monitoring during mixing. - Surface Finish Options – Available in Bead Blast or ASME #4 brushed finish for enhanced corrosion resistance and cleanability. Specifications: Model: Palletank Cubical Jacketed-Mix 200L Capacity: 200 Liters Material: Stainless Steel Jacket Type: Temperature-Controlled Jacket Mixing Type: Integrated Pro Mixer Compatibility Drainage System Sloped Bottom for High Recovery Blodpfx Agoxxybvszjd Application Storage & Mixing for Bioprocessing Compliance GMP, Biopharma Standards Benefits: - Precise Temperature Control – Maintains optimal conditions for biologics and cell culture media. - Efficient Mixing – Designed for homogeneous blending of process liquids, buffers, and media. - Enhanced Process Control – Weighing and volume control prevent aggregate formation. - Easy Integration – Compatible with Sartorius Flexsafe® Bags & Biostat® Systems. - Ergonomic & User-Friendly – Front door access and port gates for seamless tubing and sensor installation. - Durable & Hygienic – Stainless steel GMP-compliant construction with highly cleanable surfaces. - Applications: - Biopharmaceutical Manufacturing - Cell Culture & Media Preparation - Buffer & Reagent Storage - Vaccine & Protein Processing

Condition: used, This listing is for a Sigma Aldrich 2Mag MIX 1 magnetic stirrer The unit is in full working condition and is ready for immediate release. The Sigma Aldrich 2Mag MIX 1 magnetic stirrer is a powerful, wear-free magnetic stirrer designed for demanding lab use, featuring an inductive magnetic drive for reliable and maintenance-free operation. It offers a stirring volume of up to 10,000 mL, a speed range of 100 to 2000 rpm, and a digital display for speed and power settings. The stirrer has an ultra-flat, stainless steel housing that is easy to clean and includes features like SoftStart for smooth acceleration and QuickSet for fast speed adjustments. Blsdexrt U Aepfx Agzed Key features Drive system: 100% maintenance-free and wear-free using the inductive 2mag-Magnetic-Drive concept. Speed: Ranges from 100 to 2000 rpm, with jerk-free stirring even at low speeds. Stirring volume: Capable of stirring up to 10,000 mL. Power settings: Adjustable power settings up to 20 watts, with 4 different power levels for varying applications, from high-power viscous mixing to low-power continuous operation. User interface: Clear digital display for both speed and power settings. Design: Ultra-flat and durable stainless steel housing that is resistant to chemicals and easy to clean. SoftStart: Ensures reliable catching of the stir bar and safe acceleration. QuickSet: Allows for quick setting of start and maximum speeds. Memory function: Automatically saves the last settings used.

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Legs: Bljdpfxjx Nuf Hs Agzed Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Blodsx Nuf Tepfx Agzsd Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Trailer—Type: CR 47 Chassis: Two fully automatically welded I-shaped longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, 3x 9t SAF axle units with air suspension, axle spacing of 2 x 1310 mm, lift and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Dura Bright aluminum rims, size 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO compressed air brake system with RSS, according to standard 98/12/CE – ECE R13/09, connected brake wear indicator Landing Gear: Mechanical landing legs with two speeds, 2x 20t support load with pivoting foot, rear without landing support Electrical System: All lights are LED, 24 V electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, required number of yellow side marker lights, rear position lights, front marker lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, two multifunction rear lights mounted at the pivot height in aluminum brackets according to standard 97/28/CE-2007/35/CE, one LED work light on the tank, yellow warning beacon at the rear, mounted at hose pipe height, 2x reverse lights in underrun protection, 2x reverse lights at landing leg height (each switchable on the power console) Tank Version: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, 47,000 liter capacity, tank warranty: 24 months from delivery. Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°C Filling Options: 4 manholes DN 450 with swing and hinged dome covers. The dome covers are sealed pressure-tight with 4 wing nuts each, rubber supports on top for dome covers, drip rail closed at the front, open at the rear Material Discharge: 1 material discharge cone DN 800 made of stainless steel, folding with stainless steel agitator disc, material discharge cone can swing sideways, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: Bsdpfx Asx Nufmjgzeld A 2.5'' stainless steel main air line mounted right side operations, one 4" stainless steel air distributor pipe mounted at the rear of the tank, air valves (shut-off flaps) in INOX, upper air hose and air connection hoses are in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail, can be raised with a separate fold-out ladder section from below with parking brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Delivery Hose Compartment: 4 hose tube containers 5 m long, DN 200, made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum, left side

Condition: new, functionality: fully functional, Year of construction: 2026, Lintec 120 To./h fully mobile asphalt mixing plant - year: Neu - capacity: 120 To./h - cold feeder: 3x 6m³ - dryer drum Bedpfsylqfgsx Agzsld - drag elevator to load asphalt onto the trucks - dust collector Dry system with Nomex sleeves filters ; filter space 320m² - mixer Body in carbon steel plate structure, with heating cabinet by thermal oil, internal coating system anti-wear, sealing caps and inspection - control room with fully automatic software and manual mixing desktop - Mobile Tank 60.000L (40.000L bitumen / 20.000L fuel) available for extra price

Condition: new, functionality: fully functional, Year of construction: 2026, Lintec 80 t/h Mobile Asphalt Mixing Plant - Year of manufacture: New - Capacity: 80 t/h Bsdpfxoylqfas Agzjld - Cold feed: 3 x 6 m³ - Drying drum - Towing conveyor for loading trucks - Dust separator: Dry system with Nomex bag filters; filter area: 370 m² - Mixer: Carbon steel sheet housing, heated cabinet with thermal oil, wear-resistant internal coating, sealing caps, and inspection openings - Control room with fully automatic software and manual mixing console - Mobile tank: 60,000 l (40,000 l bitumen / 20,000 l fuel) available at extra cost

Condition: new, functionality: fully functional, Year of construction: 2026, Lintec 50 t mobile asphalt mixing plant Condition: New Bodpfx Agjylqdiozsld Capacity: 50 t/h Warranty: 1 year

Condition: new, functionality: fully functional, Year of construction: 2026, Lintec 40-ton mobile asphalt mixing plant Condition: New Capacity: 40 t/h Warranty: 1 year Blsdpfjylqc Sjx Agzod

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/2014, Year of construction: 2014, Equipment: ABS, Tipper with pump device 2x aluminum cabinets Pipe holder + pipes 8x container mounts Drip tray Tread plate Good condition Blodpfx Aextc Sajgzsd Input errors, amendments, mistakes, and prior sale excepted. The information given in our advertisements, online, on price tags, and in pictures constitutes non-binding descriptions and does not represent guaranteed characteristics. The seller assumes no liability for typing or data transmission errors.

Condition: new, DOPAG Micromix Bledpfxsxcgpze Agzsd The devices in the micromix series are solvent-free, compact, pneumatically driven dosing and mixing units with piston pumps. They are used for processing multi-component, low- to high-viscosity media based on, for example, epoxy, polyurethane, and silicone, with a mixing ratio from 100:100 to 100:4 in spray or continuous flow operation. The materials can be both abrasive and filled.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 0208447/TN138, tank capacity: 22,000 l, Equipment: compressor, - Tropper roll-off silo with functioning scale, see attached photo - Used - The structure is still in daily operation - Sale due to new acquisition - The silo is suitable for pellets, feed, bulk goods, etc. - On-site inspection possible at any time Bljdpfx Agsymw T Tezed

Condition: excellent (used), functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2024, operating hours: 25 h, machine/vehicle number: 24168, The inoCOMB Cabrio mini silo is used for mixing and conveying pumpable materials (mineral or organic products) with a particle size of up to approximately 8 mm. It can process pre-mixed dry mortar, screed material, or floor levelling compounds supplied by the material manufacturer. The material hopper of the mini silo can be filled directly with bagged goods, one-way containers, or big bags. During operation, the dry material is transported from the material hopper into the mixing tube via the dosing shaft. In the mixing tube, the dry material is blended with water by the mixing shaft to form a homogeneous, pasty or liquid product. At the outer end of the mixing tube, the mixed material falls directly into the pump hopper. In the pump hopper, the material is conveyed to the pump unit (rotor/stator) via the pump shaft. From there, the material is pumped through material hoses to the application site. Bljdpoyk Twpefx Agzed

Condition: excellent (used), functionality: fully functional, Aluminum flour silo with extended base ring (used), designed for a bulk density of 0.8 kg/dm³ Volume: 56,000 liters Available units: 1 Diameter: approx. 2,400 mm Cylindrical height: approx. 15,000 mm Total height: approx. 16,500 mm (incl. roof perimeter safety railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Equipment and connections: Top head: - 1 x pressure/vacuum relief valve - 1 x venting filter add-on - 1 x flange for filling pipe - 1 x flange for level measurement - 1 x flange for pressure transducer - 1 x flange for level indicator - 1 x roof perimeter safety railing with handrail - 2 x lifting lugs Silo shell: - 1 x access door 850 x 1800 mm Bedpfjyhznzox Agzjld - 8 x pipe brackets ø 108 mm for filling pipe - 1 x filling pipe DN 100, ending at TW connection at the bottom - 1 x cable protection pipe DN 50 - Various pipe penetrations in the area of the lower base ring The silo features a 40° conical bottom, terminating in a DN 1500 flange for fitting a vibrating floor. At the bottom/cone: - 1 x block flange for empty indicator - 1 x vibrating floor The currently installed measuring and control technology is included in the above offer, but no guarantee is given for its functionality! Otherwise, as per images and drawing.

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Flour silo / sugar silo made of aluminum with extended support skirt (used), designed for a bulk density of 0.95 kg/dm³ Capacity: 70,000 liters Available quantity: 4 Diameter: approx. 2,400 mm Cylindrical height: approx. 17,500 mm Total height: approx. 19,200 mm (including roof edge railing) Material: AlMg3 Bulk density: 1.0 kg/dm³ Features and connections: Top (roof): - 1 x manhole DN 600 with cover - 1 x pressure/vacuum relief valve - 1 x vent filter attachment (ø 1000 x 5 mm) - 1 x flange DN 125 for fill pipe Blsdeyhzm Rjpfx Agzod - 1 x flange DN 50 for pressure transmitter - 1 x roof edge railing with handrail - 2 x crane lifting lugs Shell (side wall): - 1 x bursting disc fitting (approx. 920 x 586 mm) - 1 x access door 850 x 1800 mm - 8 x pipe clamps ø 108 mm for fill pipe - 1 x DN 100 fill pipe, terminating at the bottom in a TW connection - 1 x cable protection pipe DN 50 - 1 x block flange for level sensor - Various pipe passages in the lower support skirt area The silo features a 40° discharge cone at the bottom, ending in a DN 1500 flange for mounting a vibrating base. At the bottom/cone: - 1 x vibrating discharge base VB 1400 with motor, manufacturer AZO - 1 x block flange for empty detector The currently installed control and measurement technology is included in the above offer, but no warranty is given for its functionality. Otherwise, as per pictures and drawings.

Condition: used, first registration: 04/2007, Equipment: ABS, * Köhler 2-axle silo trailer Blodpowyrrlefx Agzod * Type BHC 18/30/4A * 30,000 liters * Air suspension * EBS * ABS

Condition: used, Used stainless steel planetary mixer by Grieser (DE) model VPL 350. Mixer has two spiral agitators and one side wall scrapper. Agitators are belt driven by el motor 15 kW, 1460 rpm, 400 V, 50 Hz and planetary gearbox. Rising and lowering of agitators by hydraulic device. Mixer is equipped with 9 mobile stainless steel mixing pans. Each pan has internal diameter 695 mm x 500 mm depth, total volume 365 l, working about 350 l. Two mixing pans have bottom outlets with manually operated valves. There is also included mechanical rising and tilting device for discharging pans. Mixer has local control panel and el. cabinet. Technical documentation - general manual and el. schemes available in digital form. Machine currently dismantled. Last time used in food production. Bljdoyma E Espfx Agzsd Specifications: Power: 15 kW

Condition: used, Used dissolver by Oliver+Batlle S.A.(ES) type DISPERMIX 50 designed for work on vacuum. Machine has non-corrosive shaft with working length 144.5 cm. Shaft is belt driven by el motor 40 kW, 1470 rpm, 380/660 V, 50 hz. Ex design of motor (ExeG). Mechanical adjustment of shaft rotation. Shaft is equipped with stainless steel toothed disc, with diameter 350 mm. Rising and lowering of agitator in range 110 cm and is driven hydraulically. Machine has also lid cover, with diameter 108.5 cm, for work on vacuum, rised and lowered by two hydraulical actuators. Together with mixer there are: Bledpfx Aeyma Exsgzed - vacuum pump Pfeiffer Vacuum model Hena 200, output up to 240 m3/h, driven by el motor 5.5 kW. - stainless steel mixing pan with volume 500 l. Mounted on 4 leg, no bottom discharge outlet. - local control panel integrated with two hydraulic devices. Specifications: Power: 40 kW

Year of construction: 2011, condition: ready for operation (used), A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible. Bledpfxowrhwzj Agzed

Year of construction: 1983, condition: ready for operation (used), Various mixing and storage silos are available. 1) Stainless steel silo. 2) Stainless steel silo Zeppelin, year of construction: 1983, capacity: 32m³, friction angle range: 25°-45°, overpressure range: 5mbar-45mbar, max operating temperature: 50°C, bulk density: 0.6kg/dm³, silo height: 11250mm, silo diameter: 3000mm. 3) Stainless steel silo. 4) 3x identical HD-PE mixing silos, total height: approx. 10500mm, diameter: 3000mm, volume: approx. 49.5m³, mixing pipes: NW 150, motor power: 15kW. 5) 2x identical storage silos Zeppelin, year of construction: 1980, volume: 127m³, capacity: 119m³, silo diameter: 3500mm, inclination angle: 15°, hopper height: 1680mm, support ring height: 3700mm, total height: 17500mm. Documentation available. An on-site inspection is possible. Individual sale possible. Bljdpoxxl I Uefx Agzjd

Year of construction: 2021, condition: ready for operation (used), A silo system consisting of 3 storage silos, 1 weighing silo and conveying units is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, storage silo volume: 32.6m³, weighing silo volume: 13.8m³. Storage silo capacity at 0.2t/m³: 6500kg, weighing silo capacity at 0.2t/m³: 2800kg. Storage silo dimensions X/Y/Z: 4200mm/4200mm/4200mm, weighing silo dimensions X/Y/Z: 3000mm/3000mm/3400mm, control: Siemens S7. Including steel frames, gate valves, full and demand indicators, filter bags, filling line, conveying and dosing system, rotary valves and gate valves. Documentation available. On-site inspection is possible. Bljdpfx Agjv Ip Stjzed

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Blsdpfx Agewfg E Dezsd