Used Mix Tower for sale (2,963)

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Crodpfxjwfg E De Aqvoi

Condition: refurbished (used), Year of construction: 1991, Components of an asphalt mixing plant TELTOMAT mixing material silo with bucket elevator Screen and drying drum 2-shaft compulsory mixer 30,000 L heating oil tank AMECO filter system Bitumen tanks Silos with screw conveyor Crodpjtph A Nofx Aqvsi

Condition: used, Year of construction: 1992, HTI thermal oil heating system in a 20" container - 1,600 liter capacity - 320 kW - Flow temperature 300 °C AB 1000 high-temperature boiler - 1,000 liter capacity Cedjwlim Dopfx Aqvsri - Year of manufacture 1978 Weishaupt burner - Type WL40Z-A The system is operational and in good, used condition. Subject to prior sale and errors. System location: Germany - 02943 Boxberg, OT Nochten, Upper Lusatia

Condition: good (used), Tourell Gardner 1500L mixing vessel Cedoz Ak Twjpfx Aqveri Stainless, 1500L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, central bottom discharge into a Waukesha lobe pump 4.0Kw, 3Ph

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Csdpfeyvrvpox Aqvori Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, Gravimetric dosing and mixing system: Csdpfx Aqot S Rduoveri Mixing system with 5 gravimetric dosing units 5 units: • Gravimetric screw dosing unit • Feeding hopper with pneumatic rotary valve, each with a lid • Screw conveyor for feeding from a big bag, with height-adjustable individual stand 1 unit: • Trough screw for combining and conveying the dosed materials into a transfer container. 5 units: • Big bag feeding station, with a suspension crossbeam to prevent the big bag from collapsing during emptying. • Big bag disc base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control system Delivery EXW

Year of construction: 2001, condition: good (used), VMI 2936L mixing vessel 2001, Stainless, 2936L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with Inoxpa centrifugal pump, 3Ph Cedsqqhh Repfx Aqveri

Condition: used, Year of construction: 2014, operating hours: 11,448 h, Equipment: all wheel drive, Mercedes Unimog U400 with Breining U-Tank 2000 Bitumen Sprayer! ----* Manufacturer: Mercedes-Benz * Type: Unimog U400 * First registration: * Recorded mileage: approx. 242,950 km * Recorded operating hours: approx. 11,448 * Video available upon request * German vehicle * German registration * Superstructure: * Manufacturer: Breining * Type: U-Tank 2000 * Year of manufacture: 2002 * Sprayer bar width: approx. 2 meters * Bitumen tank: 1,600 liters * Water tank: 400 liters * With front sweeping brush * Price: 39,900 Euro, net + 19% VAT ----For further questions, please call: Csdpfxsz N Nzfs Aqvjri Erik Kortum: WhatsApp All information is without guarantee, errors and prior sale excepted.

Year of construction: 2001, condition: good (used), VMI 3500L mixing vessel Cedeqqhhxepfx Aqveri 2001, Stainless, 3500L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

Condition: used, Mixing kettle that tilts for emptying This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor. It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Crjdpfx Ajz Nc S Njqvsi Type: Tilting mixing kettle Lid: Pneumatically locked Discharge: By tilting the kettle Controls: Separate control cabinet with push buttons and emergency stop Construction: Stainless steel

Year of construction: 2022, condition: like new (used), functionality: fully functional, Description: JACIR Water Cooling Tower RXH-6029-84-N245-370-BR Characteristics: Thermal power: 4610 kW Incoming temperature: 43 °C Crodpevzw H Esfx Aqvsi Outgoing temperature: 30 °C dBa (20 m): 55 Max. H2O flow: 305 m3/hour

Condition: good (used), Year of construction: 2002, ARCEN CONCRETE BATCHING PLANT – FOR STABILIZATION PRODUCTION. YEAR OF MANUFACTURE: 2003. CONDITION: GOOD. MIXER: 3500 l/2.5 m3 – 160 t/h. AGGREGATE STORAGE BIN, CEMENT SILO, CATERPILLAR GENERATOR. Crjdsz H H R Rspfx Aqvji

Condition: like new (used), Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph Crodpfx Askl Hq Noqvoi

Condition: used, Year of construction: 2010, Equipment: all wheel drive, Internal vehicle number: T028 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Manufacturer: Manitowoc Lifting moment: 1230 kNm Capacity: 45 tons at a reach of 2.5 m Lifting capacity: 35 t at a reach of 3 m Maximum lifting moment: 125 kNm Reach: 34 m MAX. reach: 47 m 360-degree rotation Combined engine for driving and crane operation: HINO E 13 C, 6 cylinders, Euro engine III A, 330 kW at 1,800 rpm Torque: 1,930 Nm at 1,300 rpm Operating hours: approx. 5,900 Financing example: * Internal number: T028 * Purchase price: €109,900.00 * Down payment: 10% * Term: 60 * Monthly payment: €1,700.49 * Residual value: €22,000.00 If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to hearing from you. Subject to errors. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. Cedpfx Aqszpcxfovori GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), Year of construction: 2016, usable tank capacity: 18,000 l, total width: 2,200 mm, total height: 4,500 mm, For Sale: Sourdough preparation and storage set 3x IsernHäger Cooled and insulated stainless steel mixing/storage tank + 1x Diosna Isernhager preparation tank 3x PABST MF6000 stainless steel mixing tank - 6,000 l (2016) - Insulated (IsernHäger) Technical specifications: Brand: PABST Type: MF6000 Year of manufacture: 2016 Capacity: 6,000 liters Material: Stainless steel Insulation: Yes, fully insulated Manhole: Yes, equipped with an inspection hatch Total height: approx. 4,500 mm (4.5 meters) Tank height (without frame): approx. 2,800 mm Total width/diameter: approx. 2,200 mm Net weight: 1,650 kg Mixing system: Yes, equipped with a built-in agitator Agitator power: 7.5 kW Description: High-quality PABST MF6000 vertical stainless steel storage and mixing tank for sale. These high-quality industrial tanks from 2016 have a capacity of 6,000 liters each and are ideally suited for the food industry, including large-scale bakeries, for the storage and processing of liquid ingredients or dough products. Equipped with a powerful, integrated agitator (7.5 kW) mounted on the top, the tank ensures very efficient mixing and homogenization. The tank is fully insulated to maintain a constant product temperature during processing or storage. Key features: High-quality construction: Made of high-quality stainless steel for maximum hygiene and durability. Powerful agitator: Integrated 7.5 kW motor effortlessly handles fluids with varying viscosities. Full insulation: Excellent temperature control for sensitive ingredients. Easy to maintain: Equipped with an inspection hatch (manhole) on the top for easy access and cleaning. Safe design: Robust vertical construction on heavy-duty legs. 1x IsernHäger Diosna storage tank 1000 syst Brand: IsernHäger Load cells: Yes Manhole: Yes Own weight: 410 kg Stainless steel: Yes Total dimension Height: 2000 mm Cedpfx Aqjzval Asvori Year of manufacture: 2016 Type: 1000 syst Agitator power: 5.2 kW Tank diameter: 1300 mm Tank height: 1150 mm It is possible to view these tanks at our location. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Crjdpfjzmyviox Aqvoi Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Crodpfxezabnze Aqvoi Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Year of construction: 2013, condition: ready for operation (used), A horizontal single-shaft plowshare batch mixer WAM is available. Nominal volume: 15000l, usable volume: 10500l, mixing ratio: 1:100000, max. residual quantity: 0.1%, discharge angle: 15°, number of shafts: 1, mixing chamber material: carbon steel. Machine dimensions X/Y/Z: approx. 6150mm/2800mm/2550mm, weight: approx. 8000kg. Documentation vorhanden. An on-site inspection is possible. Codpfx Aeywlpljqvsri

Condition: used, Year of construction: 1999, Equipment: all wheel drive, FAUN RTF 40-3 very good condition repainted in 2021 currently in use with us Trade-in possible under certain conditions / LFBK / Brillen Fzg. / AWU APU / VSN / eligible for GDV listing New general inspection (HU) New UVV inspection Crodpfx Aewpn Saeqvei

Year of construction: 2017, condition: ready for operation (used), First vessel chamber pressure min./max.: -0.1MPa/0MPa, max. second vessel chamber pressure: 0.4MPa, min. process temperature: 0°C, max. vessel chamber process temperature 1/2: 100°C/152°C, vessel chamber volume 1/2: 241l/27l, vessel chamber test pressure 1/2: 0MPa/0.77MPa. Documentation available. An on-site inspection is possible. Credpjy Aad Ujfx Aqvsi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, FOR SALE: COMPLETE ELBA EMC 38 READY-MIX CONCRETE PLANT – 2007 – 4 FRACTIONS – 2 × 50 T SILOS – PLC CONTROL For sale is a complete ELBA EMC 38 ready-mix concrete plant, manufactured in 2007. The equipment is sold as a complete technological system, including a 4-fraction batching system, a conveying belt system, 2 x 50-ton cement silos, automatic PLC control, and a control/office container. TECHNICAL DATA AND EQUIPMENT: • Manufacturer: ELBA • Type: EMC 38 • Year of manufacture: 2007 • Horizontal-shaft mixer with bevel gear drive • Mixer capacity: approx. 0.5 m³ / 500 liters per mixing cycle • Nominal operating capacity: approx. 38 m³/hour • 4-fraction batching system for aggregates • Conveying belt system • 2 cement silos, each with a capacity of 50 tons • Refurbished cement silos • New silo filters Crjdjz Db Tzopfx Aqvji • New safety/overpressure valves • The mixer lining is in new condition and very good condition • Automatic PLC control • Control/office container included in the purchase price DISMANTLING, LOADING AND TRANSPORT: The ready-mix concrete plant is sold in a dismantled condition. During dismantling, electrical cables and connections will be marked to ensure that the equipment can be reassembled and electrically reconnected in its new location as clearly as possible. The seller will arrange for the equipment to be loaded onto the buyer’s provided transport vehicles. The organization of transport, the provision of suitable transport vehicles, and all transport costs are the responsibility of the buyer. The equipment is sold in the condition documented in the photographs and with the equipment detailed above. Additional detailed photos, technical information, and videos are available upon request. Location: Hungary Purchase price: 120,000 EUR + VAT

Condition: used, Used Bibby approximately 300 litre capacity 316 stainless steel vertical mixing vessel. Unit has welded dished top and bottom heads. Internal rated 3.48 bar/full vacuum design pressure at 100 deg.c. Unit has top entry off-site stainless steel agitator driven by Lightnin model LS25A air operated drive. Unit is mounted on (4) stainless steel legs. Crjdjygvl Uopfx Aqvji Specifications: Capacity: 300 L Type of Stainless: 316 Stainless Steel Internal Pressure [Y/N]: Yes Mixer/Agitator [Y/N]: Yes Tank Bottom: Dish Vertical/Horizontal: Vertical Legs/Lugs/Skirt/Saddle: Legs

Condition: used, BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open-circuit cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are priorities. Technology Patented BACross III fill media system, which allows for easy inspection of the fill to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance access: A large, inward-swinging access door and internal maintenance platforms allow technicians to conveniently perform inspections while standing inside the unit. Hygiene control: The design minimizes standing water and protects against sunlight through special air inlet elements, reducing algae growth. Flexibility: The single-sided air intake allows the cooling tower to be installed even in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial cooling: Used in factories for process cooling. HVAC: Used in large building complexes as part of a central chiller system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity, as the actual performance depends entirely on the thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Water temperatures: The performance changes significantly depending on the warm water inlet temperature (e.g., 35 °C) and the cold water outlet temperature (e.g., 29 °C). Air volume flow: According to BAC's technical data, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three installed 11.0 kW fan motors. If this air volume is reduced by a frequency inverter (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Cedpfxoynkbms Aqvjri Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of power the tower can provide. Technical Data: Fan and Air Data - Air volume flow: 60.0 m³/s (generated in suction operation) - Fan motors: 3x 11.0 kW (axial fans) - Technology: Integrated belt drive - Water flow: 198 l/s Hydraulic Connections - Water inlet: 1x DN 250 (nominal size ND 250 mm) - Water outlet: 1x DN 300 (nominal size ND 300 mm) - Make-up water connection: 1x DN 40 (ND 40 mm) - Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions and Weights - Operating weight: 11,446 kg (including water fill up to overflow) - Shipping weight: 5,350 kg (empty weight) - Heaviest single part: 3,114 kg (for installation)

Condition: used, functionality: fully functional, Year of construction: 2013, Concrete mixing plant, Sipe 1100 Year of manufacture: 2013 Credpfj Advnmox Aqvei Mixer: 1100 l / Output approx. 25 m³/h Mixer has 2 outlets/discharge points 2 x cement silos, each 40 t, with cement screw conveyor Mixing gantry with mixer and fully automatic control system with recipe memory 1 x scraper arm with chain for 2 types of gravel Installation/commissioning can be offered.

Condition: used, mileage: 1,001 km, gearing type: other, color: grey, first registration: 01/2005, Year of construction: 2005, driver cabin: other, Vehicle location: Bovenden, Structure: Stetter concrete mixing structure AM7FHC approx. 7m³ on Dautel interchangeable system ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! Cjdpfjvy A Rmjx Aqvsri - .