Used Miter Band Saw for sale (8,167)

Condition: new, Year of construction: 2020, Band saw PILOUS - ARG 260 Plus Bandsaw mitre cutting left & right Ø 260 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr) Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 260° Ihjdpfxjx S Iqbe Ag Ujt Cutting flat 90°: 300 x 200mm Capacity L 45°: 175° Capacity R 45°: 200° Cutting speed Vario:35 + 70 Circle blade size: 2880 x 27 x 0,9mm Power: 1,4kW Length: 1900mm Width: 1800mm Height: 2000mm

Condition: good (used), Year of construction: 2008, Used fully automatic band saw from Bauer Type VG 450 ZA-2 Capacity: 90° 430 x 600 mm 45° Left 430 x 430 mm 45° Right 430 x 440 mm 30° 430 x 260 mm Ihedjx Sdmropfx Ag Uot Saw frame is inclined forward by 3° Hydraulic swiveling of the saw frame, 45° to the left and 30° to the right The material clamps have a full stroke The transport clamp has a stroke of 1500 mm Cooling by mist spray unit and/or coolant 2 cutting speeds: 30/60 m/min Excluding roller conveyors

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length Iodeu R R Avspfx Ag Ujht 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2001, Manufacturer: BEHRINGER Type: HBP 530 A Year of construction: 2001 Specifications: Metric Metric US Standard Capacity 90° 530 x 530 ° Min, saw length 40 mm Max. Saw length 17 - 110 Saw power 12 kW Chip conveyor Yes Dimensions (estimate) length 4000 mm width 2250 mm height 3270 mm Ihodpfxou U Nare Ag Ujt weight 4400 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2008, functionality: fully functional, For sale: Bauer VG 320 ST vertical bandsaw Very well-maintained and reliable fully automatic bandsaw machine, complete with roller conveyor. The machine can also be easily set up as a semi-automatic. Equipped with double-sided material clamping for precise cutting and a mist lubrication system for optimal sawing performance. Suitable for mitre cuts up to 30°. Ideal for workshops and production environments where precision and reliability are important. With roller conveyors included! Price excluding VAT Iodpfex Tucgsx Ag Uoht

Condition: new, Working area round 360 mm Working area quadrant 360 x 360 mm Working area bundle W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Hydraulic saw blade tensioning Multiple feed 500 mm Drive power 3.7 kW Machine size LxW 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by IE3 motor with inverter (PMSM, Euate IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vice - Two-piece front vice - Stepless speed control by inverter - Hydraulic blade clamping - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control through quick start sensor Iodpoqrqvhefx Ag Ueht - Preset cutting counter with cut-off function - Nesting device for bundle cutting (hold-down device) - Power-operated blade cleaning brush - Saw blade monitoring with regard to standstill and blade breakage - Flushing hose for machine cleaning - Work light - Roller table with 2 m length - One M42 bi-metal saw blade - One set of tools and one toolbox

Condition: new, Circular working area 360 mm Quadrant working area 360 x 360 mm Bundle working area W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Saw blade tensioning: hydraulic Multiple feed 500 mm Drive power 3.7 kW Machine size L x W 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. Ijdpjwhli Hjfx Ag Ujht - Driven by an IE3 motor with inverter (PMSM, Euate IE4) - User-friendly PC control with touchscreen - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vise - Two-part front vise - Continuously variable speed control via inverter - Hydraulic blade tensioning - Roller bearing with hydraulically controlled carbide blade guide system - Automatic working height control via quick start sensor - Preset cut counter with shutdown - Nesting device for bundle cutting (downholder) - Power-driven blade cleaning brush - Saw blade monitoring for standstill and blade breakage - Flushing hose for machine cleaning - Work light - 2 m long roller table - One M42 bi-metal saw blade - One set of tools and one Toolbox - Full Cover

Condition: new, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm capacity 90 degrees: flat 700 x 410 mm capacity 45 degrees: round 410 mm capacity 45 degrees: flat 500 x 410 mm capacity 45 degrees: round links 410 mm capacity 45 degrees: flat links 430 x 410 mm Ihedpfx Asx Sr Drog Ujt capacity 30 degrees: round 320 capacity 30 degrees: flat 320 x 410 15 - 150 m/min workpiece weight max. 250 kg/m kg 5,5 kW 3200 kg 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages * Teleservice for remote maintenance * Setting sawing programs in the AV * Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering electric saw feed with ball screw: - highest cutting performance and quality, while being gentle on the saw band - Consistent use of the most modern recirculating ball bearing systems: - smooth-running, highly resilient, low-maintenance and play-free - Unique and patented double miter system: - Material is always clamped at right angles Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic material full stroke clamping - Automatic movement of the vices - Saw frame height adjustment automatically - Minimum speed and saw band monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA pliers insertion system from 5-2300 mm per stroke with integrated roller conveyor *Special equipment: - Laser light for cutting line display/marking saws - Chip brush driven - Micro dosing system - Clamping pressure regulation - Material bundle tension - Job menu - Material database - Zero stop - Scraper belt conveyor for optimal chip disposal, 2000 mm long - Cutting progress control

Condition: excellent (used), Year of construction: 2017, Holzkraft Bandsaw HBS 940 AS – Top Condition – Very Low Hours – DESCRIPTION - Heavy-duty design with high dead weight for maximum running smoothness - Especially quiet and precise operation thanks to a torsion-resistant machine frame - Cast iron flywheels with rubber coating and cleaning brush - 3-roller precision blade guides standard, above and below - Large grey cast iron saw table, tiltable from 0° to +15°, ground and polished surface - Large cast iron parallel fence with round bar guide, easily adjustable - Saw blade tension indicator - Precise cutting height adjustment via rack and pinion, with millimeter scale - Self-braking motor TECHNICAL DATA Dimensions and weight Length (product) approx. 1550 mm Width/depth (product) approx. 920 mm Ihodpsxz Ulzofx Ag Uot Height (product) approx. 2900 mm Weight (net) approx. 860 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Work table(s) Table length: 1250 mm Table width: 800 mm Table height: 1060 mm Table tilt: 0 - 20° Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Cutting range Max. cutting height at 90°: 560 mm Max. cutting width: 910 mm Bandsaw blade Blade speed: 1550 m/min Flywheel diameter: 940 mm Blade length: 6690 mm Min. blade length: 6630 mm Max. blade length: 6700 mm Min. blade thickness: 0.8 mm Max. blade thickness: 0.9 mm Blade guide: precision guide above and below Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, Stable bandsaw Pehaka for cutting wood and other materials. Iodoyarwmopfx Ag Ujht Roll diameter: 800 mm engine: 3 kW clearance height: max. about 350 mm

Condition: used, Year of construction: 2008, cutting diameter / mm saw band length / mm cutting width / mm including roller conveyor 4000 x 500 x 850 mm Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Iodjwm Rqtepfx Ag Ujht Parallel sawing feed system in profile guide rails Mitsubishi NC program control E1032 for preselection of 90 sets, each with a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Hydraulic material clamping with long-stroke cylinder, opening on both sides Material clamping with double vice in front of and behind the saw blade Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kasto KASTOwin A 3.3 Fully Automatic Metal Bandsaw (2017) Manufacturer: Kasto Model: KASTOwin A 3.3 Metal Bandsaw Year of manufacture: 2017 Condition: used, under power Further information available upon request. Cutting range: 330 mm Cutting area [H x W]: 330 x 350 mm Multiple feed: 9,999 mm Saw band dimensions: 5,090 x 34 x 1.1 mm Cutting speed, stepless: 12 – 150 m/min Saw motor, frequency controlled: 4.0 kW Material support height: 700 mm Length: 1,350 mm Width: 2,380 mm Height: 1,850 mm Ihodpfx Aeyab Uujg Uot Weight: 2,200 kg

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Steel and metal bandsaw machine / Brand: MÖSSNER REKORD / Type: SSF 801 / Year of construction: 1972 TECHNICAL DATA: - Roller diameter: 800 mm - Outreach: 785 mm - Maximum clearance height: 720 mm - Working table: can be swiveled on two sides Swivel range: right: approx. 45°, left approx. 10° - Band saw length: min. 5.650 mm, max. 5.800 mm - Saw band width: 10/20 mm - Cutting speed range, stepless: 15 - 940 m/min in 3 cutting speed ranges: I: 15 - 79 m/min II: 67 - 305 m/min III: 207 - 940 m/min IV Rapid speed: 4.000 m/min - Drive: 11kW - Power supply unit: 500 V, 50 Hz - Machine weight: approx. 2,3 tons - Space requirement (width x height x depth): approx. 1,6 x 2,9 x 1,9 m Additions / accessories: - Hot-knife cutting: For hot-knife cutting of steel sheets of any strength and hardness up to a cutting height of approx. 25 - 30 mm, the machine has a direct high gear with a cutting speed of 3.000 or optionally 4.000 m/min. - Band filing device - Belt grinding device Isdpsvx Hugofx Ag Ujht - Circular cutting device: The circular cutting device is attached to the guide arm directly above the clamping plate. With its help, circular saw cuts from 40 - 290 mm radius can be made. - Choice of saw bands Minimum radii that can be cut: Radius: Band width: 6 mm 3 mm 10 mm 4 mm 17 mm 6 mm 30 mm 8 mm 45 mm 10 mm 140 mm 16 mm The number of teeth on the saw band depends on the types and thicknesses of the materials to be cut. Steel: 5 - 20 mm material thickness 14 Z" over 20 mm " 8 - 10 Z" under 5 mm " 18 - 22 Z" Gray cast iron: 5 - 20 mm " 10 - 14 Z" over 20 mm " 6 - 8 Z" Brass, copper, zinc: over 5 mm " 8 - 10 Z" under 5 mm " 10 - 14 Z" Aluminum and plastics: over 5 mm " 7 - 10 Z" Soft solder: 8 - 14 Z" - Saw guides The machine has two different saw guides: * 1 x precision saw band jaw guide with replaceable, carbide-tipped, ground and lapped guide inserts for 4, 6, 8 and 10 mm saw band width. * 1 set of guide rings for 20 mm wide saw blades for working with metals and plastics at higher cutting speeds and for hot cutting. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: new, Model Name Shark 282 CCS Ihsdpfx Agogvkbco Ust

Condition: new, Model Name Ijdpfxogvkgls Ag Ueht Shark 281 SXI evo

Condition: new, Model Name Ihjdpfxjgvkche Ag Uet Shark 281 CCS

Condition: new, Model Name Ihsdpol Sva Isfx Ag Uet SHARK 331-1 NC 5.0 SPIDER

Condition: new, Model Name Shark 332-1 SXI evo Ihsdpfegvkafex Ag Ust

Condition: new, Model Name Ijdpfxegvquwo Ag Ujht Shark 332-1 CCS

Condition: new, Model Name Ihodpfjgvkctjx Ag Ust Shark 282 SXI evo

Condition: new, Year of construction: 2025, cutting diameter 240 mm saw band length 2910 x 27 x 0,9 mm cutting width 310 mm table height 900 mm 35 + 75 m/min 1,1/1,8 kW 470 kg 800 x 1720 x 1450 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV Iedjwa Ui Tjpfx Ag Ujht - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel Ihedpfolf Tu Usx Ag Uet integrated belt circulation contro...

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm 200 x 210 mm 130 mm Isdpfehhzl Hox Ag Ujht 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Condition: new, cutting diameter 280 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm 280 mm 250 mm Ihedpfsivuqtex Ag Uot 350 x 200 mm 240 mm 220 mm 230 x 220 mm 170 mm 150 mm 170 x 100 mm saw tape speed 37 + 74 m/min total power requirement 1,8 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,5 x 1,7 x 2,0 m

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1,1 mm table height 750 mm feed 5 - 2300 mm pro Hub Ihjdoulnb Depfx Ag Ujt capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 capacity 30 degrees: flat 170 x 335 15 - 150 m/min workpiece weight max. 250 kg/m kg 3,0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA