Used Mikron Ume 560 for sale (180)

Condition: good (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 18,000 W, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Crjdpfx Adjzkry Ishsh Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, AC servo controller from CNC machining center Mikron VC500D -Type: TDM 1.2-30-300-W0 -Number: 3x servo controllers available -Price: per piece Codpfx Adjztplysherh -Dimensions: 325/390/H105 mm -Weight: 8.2 kg

Condition: used, Year of construction: 2005, machine/vehicle number: 107.32.99.158, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle was replaced in July 2025! TECHNICAL DETAILS Travel range X-axis: 530 mm Travel range Y-axis: 450 mm Travel range Z-axis: 450 mm Cedpfx Adezara Ujhjrh Rotary table Table diameter: 400 mm Table load: 200 kg Swivel range: degrees Swivel speed: 20 rpm Rotational speed: 30 rpm Tool holder: SK40 Maximum speed: 12,000 rpm Recommended maximum working feed rate: 15 m/min Rapid traverse speed: 22 m/min Feed force X and Y/Z: 5,000 N Magazine capacity: 30 Maximum tool diameter: 90 mm Maximum tool length: 250 mm (manually 350 mm) Maximum tool weight: 6 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 with digital control Positional tolerance according to DIN/ISO 230-2/97: 0.008 mm Machine weight: 6,500 kg EQUIPMENT RENISHAW MP 12 measuring probe Blum tool monitoring system

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Cedpfszmrpujx Adhsrh Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Codpfoqagugsx Adhsrh

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron type HSM 400 U The machine is defective and is being sold for spare parts. Crsdpsyzt A Uofx Adheh Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2005, machine/vehicle number: 107.32.99.158, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, Re-auction due to buyer’s payment default! The machine spindle was replaced in July 2025! TECHNICAL DETAILS Travel range X-axis: 530 mm Travel range Y-axis: 450 mm Travel range Z-axis: 450 mm Rotary table Table diameter: 400 mm Table load capacity: 200 kg Swivel range: degrees Swivel speed: 20 rpm Rotational speed: 30 rpm Tool holder: SK40 Maximum speed: 12,000 rpm Recommended maximum working feed rate: 15 m/min Rapid traverse speed: 22 m/min Feed force X and Y/Z: 5,000 N Magazine capacity: 30 Maximum tool diameter: 90 mm Maximum tool length: 250 mm (manual 350 mm) Maximum tool weight: 6 kg MACHINE DETAILS Cjdpfeziz Ncox Adhsrh Control system: Heidenhain iTNC 530 with digital control Positional tolerance according to DIN/ISO 230-2/97: 0.008 mm Machine weight: 6,500 kg EQUIPMENT RENISHAW MP 12 measuring probe Blum tool monitoring system

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Codpfx Asw Emx Rsdhjrh

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, rotational speed (max.): 18,000 rpm, spindle speed (min.): 18,000 rpm, Equipment: chip conveyor, 5 axes machining center in perfect condition with Heidenhain 430 Cjdpfx Aoh Elngjdhorh

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with a 3-axis Elesta-Visulesta digital display. Fixed angular table, SK 40 spindle mount. In very good, operational condition, from an institute. The machine can be demonstrated under power by arrangement. Crjdpfxog Nw Rzo Adheh

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 500 mm Credpfxsw D Hhps Adhsh z-travel: 450 mm weight of the machine ca.: 3,5 t

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Pallete changer EROWA not come. Cjdpfjm Dtnrsx Adherh

Condition: used, EQUIPMENT Cedpfx Asuhbqpjdhsrh - With automaton Zellio SR3 type - Tilting loader no. 11 and vibratory bowl - part diameter 2.50 to 12.5 [mm] - part length 0.30 to 30 [mm]

Condition: good (used), PLC control, mains filter, mains filter, Simodrive choke transformer Cjdporbm Uhofx Adherh -Manufacturer: Siemens, Simodrive 611 choke and transformer from CNC machining center UME 600 -Chorus: Type 6SN 1111-0AA00-0BA0 -Transformer: Trasfor TNT BN 2K5/E -Price/Delivery: complete -Dimensions: 525/240/H230 mm -Weight: 33.6 kg

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 400 mm, The design of the basic machine is characterized by the following features: - Horizontal arrangement of the workpiece spindle; vertical arrangement of the milling spindle or milling head - The workpiece is held between the workpiece spindle housing (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The swivel milling head is equipped with an automatic angular adjustment (A-axis); the swivel slide (Y-axis) moves tangentially to the workpiece diameter TECHNICAL DETAILS Travel range, X-axis: 140 mm Travel range, Y-axis: 100 mm Travel range, Z-axis: 300 mm Tailstock travel, W-axis: 420 mm Swivel angle, end mill head, A-axis, left: 50° Swivel angle, end mill head, A-axis, right: 60° Largest module that can be milled with involute cutters according to DIN 8002: 4.5 mm Largest module that can be milled for high-performance milling: 3.0 mm Number of teeth: 2–999 Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Workpiece length: max. 400 mm Milling spindle speed range, B-axis: 0–1,500 rpm Workpiece speed, C-axis: 0–350 rpm Milling tool data Milling tool diameter: 40–102 mm Csdszwmyispfx Adherh Milling tool length: max. 230 mm Radial front diameter (standard): 16–32 mm Milling coordinates Z-axis: 100–400 mm X-axis: 130–150 mm Y-axis (face of milling spindle): 50–230 mm W-axis (face of tailstock spindle): 165–585 mm Feed rate, X-axis: 3,500 mm/min Feed rate, Z-axis: 3,500 mm/min Feed rate, Y-axis: 4,000 mm/min Feed rate, W-axis: 5,500 mm/min Feed rate, V-axis (portal loader): 80,000 mm/min EQUIPMENT IBH control system Loading device A wide range of accessories

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 300 mm, table length: 450 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 400 mm Crjdpfxozpwx Hj Adhjh Work table surface area: 300 x 450 mm Number of threaded holes: 2 x 6

Condition: good (used), Pressure boosting cylinder, pressure boosting of hydraulic pump, hydraulic power unit, hydraulic pump, hydraulic pump Cjdpoztpp Eofx Adhsrh -Manufacturer: Mikron, RAM POWER pressure amplifier from a Mikron VC500D CNC machining center -Type: 152 284 4 RP 9813 -Individual components: see photos -Transport dimensions: 580/215/220 mm -Weight: 12.6 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller model: iTNC Heidenhain 530, spindle speed (max.): 42,000 rpm, swivel angle C-axis (max.): 360 °, number of axes: 5, No minimum price – guaranteed sale to the highest bidder! The lot consists of 2x 5-axis HSC machining centers and pallet system with robot MIKRON HSM 600 U (serial number: 217.88.00.070) TECHNICAL DETAILS Travel X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / –110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Credpjx Hx T Aofx Adheh Torque (max.): 217 Nm max. Clamping torque: 1,400 Nm B-Axis Swivel range: +30° / –110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load capacity: max. 120 kg Tool magazine: 68 stations Control: Heidenhain iTNC 530 Workpiece weight: max. 120 kg EQUIPMENT Rotary tilting table with Erowa UCP MIKRON HSM 400 U (serial number: 217.87.00.178) TECHNICAL DETAILS Travel X-axis travel: 400 mm Y-axis travel: 240 mm Z-axis travel: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ±110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): 217 Nm max. Clamping torque: 500 Nm B-Axis Swivel range: ±110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): 686 Nm max. Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load capacity: max. 25 kg Tool magazine: 36 stations Control: Heidenhain iTNC 530 EQUIPMENT Rotary tilting table EROWA ROBOT MULTI TWIN Gripper station: 6 stations Grippers: various Storage system Rotary storage: 5 levels Level allocation Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Absolute measuring systems on all axes Infrared touch probe LASER Electronic handwheel for setup mode Graphite dust extraction 2x BURN WK 5806 Rotary pallet storage

Condition: good (used), Year of construction: 2000, 20000 rpm, tool measurement on table will come, Parts shown by hand not come. Crodpfx Ader Urm Sjhsh

Condition: used, x-travel 450 mm Cjdpfsxv D U Iox Adherh y-travel 400 mm z-travel 400 mm Control Heidenhain TNC 355 turning speed range 40 - 4000 U/min number of speeds 21 tool taper ISO 40 quill stroke 90 mm feed speeds 2-3000 mm/min rapid traverse longitudinal and cross 6000 m/min rapid traverse Z-axis 5000 m/min distance spindle nose and table 450 mm table travel 495 mm table surface area vertikal 300 x 450 mm fixed clamping table 460 x 800 mm max. loading 350 kp dimensions ca. 3150 x 1800 x 2125 mm weight - pallet system ca. 2380 kg weight of the machine ca. 2,4 t incl. variois tool holders SK 40 manual included

Condition: used, Year of construction: 1991, Milling machine in good condition, fully operational. Connected, can be tested, inspected. Specification: Model: Mikron WF31C Year: 1991 X axis: 500 mm Y axis: 500 mm Z axis: 400 mm Speed: 31,5 - 3150 rpm Contorter: Heidenhain TNC 155 Motor power: 4kW Weight: 2 300 kg Crjdpoq Hdwuofx Adhoh Machine dimensions: 2580 x 1800 x 2125 mm Manufactured in: Switzerland If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 0144, functionality: fully functional, operating hours: 17,716 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 600 mm Z-axis travel: 675 mm Work spindle speed: 30 - 8,000 rpm Tool holder: ISO B 40 Table size: 1,220 x 620 mm T-slots: 18 T-slots: 5 x 18 mm T-slot spacing: 100 mm Table load capacity: 1,700 kg Control system: Heidenhain iTNC 530 Feed rate X / Y / Z: 3,000 mm/min Rapid traverse X,Y / Z: 24 / 20 m/min MACHINE DETAILS Csdpox Trpqofx Adhjrh Voltage: 3 x 400 V AC + PE, 50/60 Hz Control voltage: 24 V DC Connected load: 16 kW Weight: 8,000 kg Operating hours Control on: 44,842 h Machine on: 36,513 h Program run: 15,882 h Drives on: 31,655 h Spindle on: 17,716 h

Condition: good (used), Main spindle with drive motor, universal milling head, milling chuck, milling extension, angle milling head, top slide, top slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper tool slide from Mikron VC500D CNC milling machine -Motor: INNDRAMAT 165V 5.5 kW see photo type plate 100C-B050B1-AS03 -Speed: 1500/8000 rpm -Spindle head: SK40 mount -Dimensions: 910/1120/H510 mm Codpfx Adoy H Ivmohjrh -Weight: 365 kg

Year of construction: 2005, condition: excellent (used), MIKRON HSM 400 U High-Speed Machining Center The exact scope of the offer can be found in the photo series. It includes, among other things: measuring probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, band filter system, approx. 50 HSK tool holders, etc. 1. TECHNICAL DATA Working area X-axis: 400 mm Cjdpfsigrf Ijx Adhsrh Y-axis: 450 mm Z-axis: 350 mm B-axis: +-110° C-axis: 360° Spindle Speed range: 100 – 42,000 RPM Tool interface: HSK E 40 Spindle power at 40% duty cycle: 13 Spindle power at 100% duty cycle: 10 Torque at 60% duty cycle: 4.25 Torque at 100% duty cycle: 3.2 Lubrication: Oil/air Feed rate Rapid traverse speed: Max. 40 m/min B-axis: 150 RPM C-axis: 250 RPM Axis acceleration, XYZ: Max. 1g (10 m/s2) B-axis: 100 rad/s2 C-axis: 300 rad/s2 Tool changer: 68 positions Chip-to-chip time: 12.5 s Tool change time: 10.0 s Work table: 120 mm Max. workpiece diameter that can still be rotated 360°: 230 mm Max. workpiece height: 350 mm Max. workpiece weight: 25 kg Control system: Heidenhain iTNC 530 Weight: 5500 kg We do not guarantee the accuracy, completeness and up-to-dateness of the information.

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron VC500D -for: max. 16 recordings -Recording: SK40 -Individual components: see photos -Transport dimensions: Ø 780 x 540 mm -Weight: 56 kg Codpfoy Tvttjx Adhsrh