Used Mikron Haas Vce 500 for sale (174)

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm tool taper:SK 40 total power requirement:7,8 kW weight of the machine ca.:1.8 t Rcedpfscxxq Dox Adzef dimensions of the machine ca.:2,1 x 1,6 x 2,2 m

Condition: repair required (used), Year of construction: 2001, X-axis: 400 mm Y-axis: 240 mm Z-axis: 350 mm Spindle speed: 42,000 rpm Tool holder: HSK-E40 UPC pallet system: 320 x 320 mm Rcsdpfxjznk Ryo Adzof Control system: HEIDENHAIN TNC 430 M The machine is not ready for operation; the spindle needs to be replaced.

Condition: good (used), Year of construction: 2004, HSK 63 18.000 rpm Rodpfx Aoznmifedzjcf Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 1998, A Mikron CNC vertical machining center is available. Travel X/Y/Z: 900mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: approx. 500kg, tool holder: SK40, speed: 5000rpm, rapid traverse: 10m/min, feed: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 5000kg, control: Mikron, operating hours: approx. 35580h. The main control board of the machine has a defect. Including approx. 100 SK40 tool holders and tools. An on-site inspection is possible. Rcodezf Ncijpfx Adzsf

Condition: ready for operation (used), X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible. Rcedpezavyrofx Adzef

Condition: ready for operation (used), Rotational speed: 0-3150/min, power supply: 20A, connected load: 9kW, control: Heidenhain TNC 155, length: 2700mm, width: 2900mm, height: 2000mm, weight: 2.3t. An on-site inspection is possible. Rcjdjzavyxspfx Adzef

Condition: used, Year of construction: 1987, functionality: limited functionality, machine/vehicle number: 30 09, Mikron WF 31 C, universal CNC milling machine. CNC control: Heidenhain TNC 155. Weight approx. 2300 kg. The machine is currently not connected and is in transport condition, but can be prepared according to customer requirements. Rodpfxeygk Nns Adzscf

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 400 mm Control Heidenhain turning speeds 3150 U/min table surface area 700x350 mm Table load 400 kg spindle taper ISO 40 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Rcjdpfx Adoyutv Hezjf Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2000, Travel paths X travel: 600 mm Y travel: 450 mm Z travel: 450 mm Table size: 850 x 530 mm Rcjdpfxsyvzbno Adzof Working spindle Spindle speed: 100 – 20,000 rpm Tool holder: HSK 63 Tool magazine capacity: 30 slots Machine dimensions: 3900 x 3500 x 2700 mm Weight: 6500 kg

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, rotational speed (max.): 18,000 rpm, spindle speed (min.): 18,000 rpm, Equipment: chip conveyor, 5 axes machining center in perfect condition with Heidenhain 430 Rcodjh Elngjpfx Adzjf

Condition: used, Year of construction: 2005, machine/vehicle number: 107.32.99.158, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle was replaced in July 2025! TECHNICAL DETAILS Travel range X-axis: 530 mm Travel range Y-axis: 450 mm Travel range Z-axis: 450 mm Rotary table Table diameter: 400 mm Table load: 200 kg Swivel range: degrees Swivel speed: 20 rpm Rotational speed: 30 rpm Tool holder: SK40 Maximum speed: 12,000 rpm Recommended maximum working feed rate: 15 m/min Rapid traverse speed: 22 m/min Feed force X and Y/Z: 5,000 N Magazine capacity: 30 Maximum tool diameter: 90 mm Rcodpfxjzara Us Adzjf Maximum tool length: 250 mm (manually 350 mm) Maximum tool weight: 6 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 with digital control Positional tolerance according to DIN/ISO 230-2/97: 0.008 mm Machine weight: 6,500 kg EQUIPMENT RENISHAW MP 12 measuring probe Blum tool monitoring system

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Rcsdpfxszmrpuo Adzjf Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Rcjdpfxoh Tnpxo Adzef

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal Rcedpsw A Af Iofx Adzjf - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, Year of construction: 1997, total height: 2,900 mm, total length: 4,000 mm, total width: 2,400 mm, Colour: White Empty weight: 10.000 kg - Year: 1997 - Documentation available: No - CE certificate present: No - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Heidenhain - Power [kW]: 22.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 750 - Z-axis travel [mm]: 750 - Table length [mm]: 1150 - Table width [mm]: 750 - Tool holder: ISO40 - Max. spindle speed [rpm]: 12000 Rcodpsy Uwawofx Adzof - Options: Tool measurement system - Transport dimensions: 4000mm x 2400mm x 2900mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m Rcodpfjtv Ia Tox Adzof • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: used, Year of construction: 2000, x-travel 1000 mm y-travel 1040 mm z-travel 750 mm Rjdpfxstig D Is Adzocf control Heidenhain TNC 426 turning speeds 15000 U/min total power requirement 40 kW weight of the machine ca. 10,1 t required space / m

Condition: used, Year of construction: 2005, machine/vehicle number: 107.32.99.158, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, Re-auction due to buyer’s payment default! The machine spindle was replaced in July 2025! TECHNICAL DETAILS Travel range X-axis: 530 mm Travel range Y-axis: 450 mm Travel range Z-axis: 450 mm Rotary table Table diameter: 400 mm Table load capacity: 200 kg Swivel range: degrees Swivel speed: 20 rpm Rotational speed: 30 rpm Rcjdeziz Ncspfx Adzsf Tool holder: SK40 Maximum speed: 12,000 rpm Recommended maximum working feed rate: 15 m/min Rapid traverse speed: 22 m/min Feed force X and Y/Z: 5,000 N Magazine capacity: 30 Maximum tool diameter: 90 mm Maximum tool length: 250 mm (manual 350 mm) Maximum tool weight: 6 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 with digital control Positional tolerance according to DIN/ISO 230-2/97: 0.008 mm Machine weight: 6,500 kg EQUIPMENT RENISHAW MP 12 measuring probe Blum tool monitoring system

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Rjdpfxjqttt To Adzecf

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 500 mm z-travel 400 mm table-size 900 x 530 mm control Heidenhain TNC 355 tool adaptor ISO 40 | | turning speed range 40- 4000 U/min rapid speed 5 / 6 m/min feed speeds 2 - 3000 | mm/min | power requirement 6 kW table load 350 kg Rcedpfx Ajyxr Hmedzjf dimensions 2,6 x 1,8 x 2,2 m weight 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Rcsdpfsw Emx Rox Adzof

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 300 mm, table length: 450 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 400 mm Rsdpszpwx Hjfx Adzocf Work table surface area: 300 x 450 mm Number of threaded holes: 2 x 6

Condition: used, Year of construction: 1990, x-travel 450 mm y-travel 400 mm z-travel 400 mm Rsdpfxopxrkno Adzecf control Heidenhain 355 total power requirement 4 kW weight of the machine ca. 2,4 t

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos Rcedpfx Adewd N S Djzsf -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: ready for operation (used), Year of construction: 1995, operating hours: 9,031 h, spindle speed (max.): 5,000 rpm, overall weight: 3,200 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 407, spindle motor power: 9,000 W, number of axes: 3, This 3-axis MIKRON UME600 was manufactured in 1995. It features a maximum spindle speed of 5,000 rpm and a feed rate of up to 10,000 mm/min. The table size is approximately 900 × 530 mm, providing ample workspace for various machining tasks. If you are looking to get high-quality milling capabilities, consider the MIKRON UME600 vertical machining centre we have for sale. Contact us for further details. • Feed rate: max. 10,000 mm/min • Table size: approx. 900 × 530 mm • Automatic tool changer: none • Condition: Used, good overall condition; fully functional and ready for operation • Machine hours: 11,643 h • Spindle hours: 9,031 h Additional equipment • Coolant pump • Machine vise • 3D touch probe • Various collet sets / SK40 tool holders • Tool cabinet with worktop and bench vise • Additional accessories by arrangement Technical Specification Rcsdpfoyll Szjx Adzef Taper Size SK 40