Used Metal Cabinets for sale (37,243)

Condition: used, Oscillating shear machine KÖLLSCHEN, type BSK 2000/2 Cutting length: 2000 mm Cutting thickness: 2 mm Stand overhang: 90 mm Working height: 920 mm Power supply: 380 volts, 50 Hz Motor power: 4 kW - Drive via geared motor with brake and crankshaft Chjdsifu Anepfx Ap Djd - Mechanical sheet metal holder - Manual back gauge, 500 mm - Gauge adjustment via 2 handwheels, at the rear on the back gauge guide with a measuring scale - Front side gauge, left, 720 mm - Electric foot switch - Manual central lubrication - Control cabinet on the machine - Machine rests on 4 oscillating elements, approximately 100 mm in height Space requirement (L x W x H): 2800 x 1700 x 1450 mm Weight: 2300 kg Good condition

Condition: used, Metal detector with conveyor and reject bin This Goring Kerr metal detector (later part of Thermo) checks products for metal particles as they pass through the detector head on the belt. Products found to contain metal are rejected from the belt into the stainless steel reject bin. Chsdpfoz Nc Udex Ap Djd Belt and detector share a frame on castors, with their own control box for start, stop and emergency stop. We have not been able to confirm the model or year of manufacture. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Metal detector with conveyor Reject: Reject bin beside the belt Belt: Blue plastic belt Controls: Own control box with start, stop and emergency stop Construction: Stainless steel, frame on castors

Condition: used, functionality: fully functional, Year of construction: 1989, Hydraulic Swivel Bending Machine Manufacturer: FASTI, Type: 212 – 20 – 3 Year of manufacture: 1989 Technical data Manufacturer: Fasti Type: 212-20-3 Year of manufacture: 1989 Working length: 2040 mm Sheet metal thickness: 3 mm Chodpsz Hayxjfx Ap Djd Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Equipment - Controlled rear stop 1000 mm with ball rollers, extendable to 1500 mm - Siemens S7 control system for bending angle + rear stop - Manual adjustment of bending dies - Bending rail 12 mm - Support rail, height 130 mm, length 1,600 mm, segmented All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 47800, Offer 26308 Technical specifications: - Maximum working width: 3040 mm - Maximum material thickness at 40 kp/mm² tensile strength: 2 mm - Electronic adjustment of bending angle: 0 - 180° - Automatic sequential control for a complete working process - Maximum upper die setting: 250 mm - Maximum opening width/stroke of the upper die: 350 mm - Height adjustment: - Upper die: 30 mm - Lower die: 90 mm - Upper die drive: 400 V / 1.5 kW Cjdpfxoz Ndu Se Ap Dohd - Lower die drive: 400 V / 4.0 kW - Space requirement: approx. W 4450 x H 1650 x D 2100 mm - Weight: approx. 3900 kg - Includes: - Point rail + lower die rail - E-foot switch

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, drawer cabinet -Tool cabinet Schäfer, drawer cabinet sturdy design -1 drawer/ 2 borders: Layout/height see photos -Cabinet door: lockable -Quantity: 1 piece available Cjdpfx Aoud Utijp Dehd -Dimensions: W x H x D 500/500/1000 mm -Weight: 29 kg

Condition: used, Vötsch VCS 4100 climate testing chamber, -40 °C to +180 °C Manufacturer: Vötsch Type: VCS 4100 Temperature range: -40 °C to +180 °C Supply voltage: 400 V Rated current: 17 A Rated power: 11 kW Refrigerant: R404A KK-07 Chodpfx Apsuuiyge Dod You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Diameter: 800mm 3 Chuck: yes Chedpfxswvrp Ao Ap Ded Spindle bore:130mm Connector: Camlock 13 Max. speed: 100Rpm Length: 800mm Width: 800mm Height: 400mm Weight: 200kg

Condition: used, We are offering a metal saw made by Eisele for sale. Codpfx Ajz S Ndlep Dohd If you have any further questions about the product or are interested in purchasing it, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2012, Apfel – Tool cabinet with four drawers suitable for long tools / reamers & deep-hole drills, etc. - Year of manufacture: 2012 - 3 x drawers, each 180 mm wide / load capacity 900 kg each - 1 x drawer, 300 mm wide / load capacity 1800 kg - Overall height: 2140 mm - Cabinet dimensions (W x H x D): 1040 x 2140 x 1300 mm Cedpe Afdgtsfx Ap Dohd - Empty weight: approx. 450 kg Errors and omissions excepted.

Condition: good (used), Lock Metal detector Chedpfxjyhhxis Ap Ded Stainless, belt dimensions 1500mm x 500mm, aperture 530mm x 100mm, Password 1111, stop / start with alarm, 3Ph

Condition: used, Memmert B60 Incubator For sale is a used incubator, model B60, manufactured by Memmert. Technical details: - Manufacturer: Memmert - Model: B60 - Type: Incubator / Heating cabinet - Temperature range: approx. +10 °C above room temperature up to 70 °C - Power: approx. 2000 W (220 V / 50-60 Hz) - Application area: Laboratory, research, industry, medicine - Condition: Used, fully functional Chsdpfx Apsxlq Nks Dod - Internal dimensions: L: 50 cm, W: 100 cm, H: 80 cm Buy Memmert B60 incubators and other items at affordable prices – Buy from the professional for the professional – You will find more attractive offers in our shop.

Condition: used, Heraeus Kendro UT 6120 Drying Cabinet For sale is a used laboratory heating oven from Kendro Laboratory Products – model UT 6120, manufactured in Germany (Hanau). This device is ideal for laboratory applications, drying, heating, and material testing up to 300 °C. Technical details: Chjdpjxl A Tbsfx Ap Dsd - Model: UT 6120 - Order number: 51008822 - Factory number: 99108504 - Max. temperature: 300 °C - Supply voltage: 230 V - Frequency: 50 Hz - Power consumption: 2.4 kW - Current consumption: 10.2 A - Protection class: Class 2 - Degree of protection: IP 20 - Temperature protection: DIN 12880/1 - Connection type: 1N/PE - Origin: Made in Germany (Hanau) Condition: Used, with minor signs of wear (see pictures). You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Rittal control cabinet air conditioning unit TS 8806.500 Rittal standard control cabinet used air conditioning unit TS 8806.500 Lighting PS 4155100 220x80x60 cm (H x W x D) Csdpfx Aoxl Td Rep Djhd Powder-coated Rittal control cabinet air conditioning unit SK 3304500 EAN: 4028177251038 control cabinet air conditioning unit You can find more control cabinets in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Lista drawer cabinet with milling tools Lista drawer cabinet Number of drawers: 13 Type of extension: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Codpfsq Aa I Tsx Ap Dohd Color of cabinet: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 720 x 710 x 1000 mm Contents: Metal circular saw blades Disc milling cutters, cross-toothed and coupled Disc milling cutters, cross-toothed Angle, semi-circular milling cutters Dovetail milling cutters Semi-circular milling cutters Thread milling cutters More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, Center length ----- 1000 mm Center height ----- 180 mm Turning diameter ----- 360 mm Passage of main spindle ----- 38 mm Bed width ----- 203 mm Spindle speed ----- 45-1800 rpm Motor ----- 2.4 KW Weight ----- 880 kg INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 scoops * 3 chuck 200 mm * 4 chuck 200 mm * chuck 250 mm * LED work light and cooling system * Fixed and moving guards * Foot brake (CE) * Electric brake (CE) Codpfx Asq E Iyzep Dshd

Condition: excellent (used), Year of construction: 2016, operating hours: 5 h, functionality: fully functional, overall weight: 19 kg, type of input current: DC, input voltage: 220 V, total height: 320 mm, control voltage: 24 V, year of last overhaul: 2025, compressed air connection: 4 bar, temperature: 60 °C, Equipment: type plate available, Implantation by gravity fall or full column. Mechanical Description: • Height: 320 mm max • Effective passage diameter: 45 mm • Aluminum ejection valve • Aluminum Chassis • Phenolic resin inner tube (anti-wear option on request) Chsdpfxohr R Ius Ap Ded • Overload tolerated above the device: 150kg • Weight: approximately 18kg Conditions of use: • Working temperature: 0 to 60°C • Protection: IP50 • 4 to 6 bar compressed air, water and oil free filtered, quick coupling NW7.2 • Maximum product drop height: 0 to 600mm • Maximum flow rate with standard pellets from 2 to 4mm: 5400 L/H • Detection sensitivity with STANDARD electronics • Ferrous: 0.35 mm • Stainless steel: 0.9 mm • This data may vary depending on the location, vibration or effect may reduce sensitivity.

Condition: used, Laminar Flow Microbiological Safety Cabinet BDK S 1200 Principle of Operation The safety cabinet is a laboratory device in which a largely turbulence-free (laminar) displacement flow prevails in the working area. The air flowing through the working area, as well as the exhaust air, is cleaned by a high-performance particulate filter. Scope of Performance and Features Csdpfxsl Smgge Ap Dshd - Model Version The safety cabinet is manufactured in three different sizes: BDK-S 1200, 1500, and 1800. - Air Monitoring The air flow velocity in the recirculating air (downflow working area) and exhaust air area (inflow exhaust air) is monitored using flow probes. Any occurring malfunctions are indicated by an indicator light and a signal horn. - Viewing Panel Monitoring The viewing panel made of safety laminated glass is equipped with a weight compensation system and can be moved very easily and smoothly by hand. If the viewing panel is not in the working position (opening greater than 190 mm), this is indicated on the display and with a signal horn. - Control Panel All the switching elements, membrane keypad, signal horn, and indicator lights required for operation, as well as the display for showing the various operating states, are arranged in the control panel. - Microprocessor Control The microprocessor control system is self-monitoring and continuously displays the air flow velocity. - Device Depth < 800 mm (840 mm) Due to the small device depth, the safety cabinet fits through all standard laboratory doors. - Housing Design For safety reasons, the housing is made of 1.5 mm thick Zincor sheet metal with a welded pressure area. - Contamination Areas All contamination areas are flushed with negative pressure. - Low noise emissions - Glare-free lighting of the working area - Seamless working area made of stainless steel Manufacturer: BDK Model: S-1200 Type: Laminar Flow Safety Cabinet Year of Manufacture: 2001 New Price: €6,500 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Feutron Temperature Test Chamber -40 to +100°C The Feutron TPK 3403/125, due to its robust design, is a reliable workhorse for standardized temperature tests. The main application areas for this model are: 1. Electronics and Component Testing This is the most common application. It involves testing how components react to extreme temperatures: Functional testing: Does the circuit board still function flawlessly at -40 °C or +150 °C? Burn-in tests: Artificial aging of components through continuous operation at high temperatures to provoke early failures. Cedoy Nynaspfx Ap Dshd 2. Material Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in the cold? Deformation: Do composite materials warp in the heat? Storage tests: How stable do chemical substances or adhesives remain over long periods at a constant temperature? 3. Quality Assurance (QA) Sampling inspection: Tests carried out during series production to ensure that the production process meets the specified temperature ranges. Standard testing: Performing tests according to common industry standards (e.g., DIN EN 60068), which specify certain temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions before mass production. Manufacturer: Feutron Type: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration unit: Air-cooled condenser Temperature stability: approx. ±0.1 to ±0.5 K Usable volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power connection: 220/280V-3-50Hz Supply line fuse: 25 A Protection class: IP 20 Weight: 480 kg “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More items - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FX32 PLUS with a pivoting beam, featuring both fixed and segmented tooling. The Plus model, with its adjustable bending center, maintains a consistent distance to the radius rail throughout the entire bending process. The result is a perfect radius, without causing material stress, regardless of thickness, ensuring a flawless finish and virtually unmatched accuracy in angles and measurements. Technical specifications: Cjdpfezc Hvisx Ap Djhd Year of manufacture: 2024 Control: CNC with nuLink Mechanical bending compensation adjustment (Crowning system) Working length: 3200 mm Max. bending thickness: 2 mm Bending beam tooling: 7/10 and 20 mm Automatic back gauge – flexible 1550 mm CNC control with nuLink graphical user interface (intuitive, easy programming) Quick-change segmented tooling High accuracy and repeatability Application: These machines are designed for bending, forming, and profiling sheet metal. They are ideally suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Bending machine Manual swing-beam bending machine Manufacturer: Gabro Box Folder Type: BF Bending capacity: 500 x 2 mm Steel: 1000 x 1.25 mm By using a split bending beam, boxes with the following dimensions can be produced: 1000 x 570 x 215 mm Chodpszdp Hxefx Ap Ded New price: 2733 Euros Length: 1200 mm Width: 750 mm Height with pallet: 1400 mm Weight with pallet: 155 kg

Condition: excellent (used), Year of construction: 2021, total length: 1,200 mm, total width: 800 mm, total height: 250 mm, SCHUNK - KONTEC KSG 100 MACH-ID 9632 Make: SCHUNK Type: KONTEC KSG 100 Year: 2021 Clamping force 4 - 30 kN Weight 19.5 Kg Single stroke vice Clamp width: 100mm Max. opening: 100mm Manuel or hydraulic: Manuel Number of matching vices:4 Length: 1200mm Width: 800mm Height: 250mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Cedpfx Ajy Uvk Isp Dshd

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 12.22 C5205905, overall weight: 13,000 kg, FINN-POWER C5 CNC | 1250 x 2500 mm | 30 Ton | Year 2005 FINN-POWER C5 CNC Turret Punch Press For sale: Finn-Power C5 CNC turret punch press, manufactured by the renowned Finnish sheet metal processing machinery producer. The machine has been used in regular production and remains complete, operational, and ready for further use. The machine can be inspected under power by prior appointment. Sale with VAT invoice. All costs related to dismantling, loading, transportation, and reinstallation are the responsibility of the buyer. Technical Specifications Manufacturer: Finn-Power Model: C5 Year of Manufacture: 2005 Control System: Siemens Sinumerik Codpfxj Ah Ha Ae Ap Dehd Maximum Sheet Size: 1,250 × 2,500 mm Punching Force: 300 kN (30 tons) Turret Capacity: 20 tool stations Operating Pressure: 300 bar Machine Weight: approx. 13,000 kg Equipment Turret equipped with tooling Additional tool holders and tools included Siemens Sinumerik control system Brush table Technical documentation available on site Manual sheet loading Machine Condition Machine operated in production until 30 September 2026 Regularly used and maintained All major components complete Available for inspection and testing Key Advantages ✅ Proven Finn-Power technology ✅ 30-ton punching capacity ✅ Working area 1,250 × 2,500 mm ✅ Siemens Sinumerik CNC control ✅ Tooling package included ✅ Available for live inspection

Condition: good (used), Year of construction: 2016, operating hours: 9,150 h, functionality: fully functional, Used Edgebreaker 2000Plus in good condition, with Teka wet dust extraction system, immediately available. Chjdpfx Apj Ah E Tko Dsd Can be inspected while powered on.

Condition: ready for operation (used), functionality: fully functional, operating hours: 17,508 h, Year of construction: 2018, machine/vehicle number: S0721Q0022, laser power: 500 W, overall weight: 4,300 kg, construction height: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Build volume: Ø 300 × H 400 mm Build rate: 5–60 cm³/h Chjdoz Irhkepfx Ap Djd Layer thickness: 20–150 µm Laser power: 500 W Beam diameter: 100–500 µm O₂ concentration: 100 ppm Exposure speed in the powder bed: 3 m/s Preheating of the substrate plate: 200 °C MACHINE DETAILS Voltage: 400 V Current: 32 A Frequency: 50/60 Hz Dimensions & Weight Dimensions incl. filter system: 3,385 × 1,435 × 2,225 mm Weight incl. filter system: 4,300 kg Laser operating hours “Laser Beam on”: 17,508 h (as of 11.04.2023) EQUIPMENT Filter system Zirox sensor Single laser Powder Bed Monitoring Condition Monitoring Performance Monitoring Protective gas operation with nitrogen or argon 4 dosing containers 1 build cylinder 1 overflow container Various spare parts, including protective glass Manuals All axes professionally secured for transport The following materials can be processed: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum-, nickel-based, cobalt-chromium, copper, titanium and precious metal alloys. Last processed material: AlSi10Mg

Condition: used, functionality: fully functional, number of straightening rollers: 11, working width: 2,500 mm, sheet thickness (max.): 17 mm, roller diameter: 180 mm, type of input current: AC, product width (max.): 2,500 mm, input voltage: 400 V, roller (top) diameter: 180 mm, straightening roller diameter: 180 mm, VEB Gotha UBR 16x2500 Sheet Metal Straightener, Used machine Manufacturer: VEB Blechbearbeitungsmaschinenwerk Gotha (Germany) Type / Model: UBR 16x2500 Overall dimensions: Machine dimensions: 2000 x 7300 x 2100 mm Roller tables (2 pcs): 6000 x 2220 x 770 mm Technical and capacity data: Number of straightening rollers: 11 pcs Working width (max. sheet width): 2500 mm Chodpfx Ape Ah Dx Hj Djd Roller diameter: 180 mm Straightening capacity by steel grade: St60 steel: max. 14 mm St50 steel: max. 14 mm St42 steel: max. 16 mm St37 steel: max. 17 mm