Used Metacap Spray Gun for sale (4,049)

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. Csdjfy T Arepfx Abbsaa A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Year of construction: 2018, condition: ready for operation (used), I sell the 4-side spraying automat Automatica 90° feeding system Caedpfjw Ancfjx Abbea 4 x 2 spraying guns from each side Feeding system with motors. Good condition. Available immediately.

Year of construction: 2023, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: WQA1313, Used industrial automatic spray paint stripping demo device. The device is designed for quick and efficient paint stripping, for example, from powder-coated parts or rims. It features a filtration system to remove paint particles from the process. Technical specifications are included in the documents. The device is ready for immediate use. Cjdewrfayspfx Abboaa We recommend using ALIT Technologies SPA paint removal chemicals.

Year of construction: 2025, condition: new, RC1100G5 FREE SHIPPING TO EUROPE Cajdpfxogd Ucgo Abbja Product from Serbia 100%. 1. Platform diameter: 1100mm 2. Maximum height : 650mm (from platform to nozzles) 3. Maximum load : 350kg 4. Pumps : 2 pumps, each to 2,2kW 400L/min 3,7 bar. stainless steel AISI304 5. Special shape of laser-made nozzles (The best ratio of pressure and width of the jet) 5. Platform drive : Step SERVO MOTOR with with collision detection 6.Heaters : 2x(2x3kW) = 12kW stainless steel AISI304 7. Cover sensor: YES 8. Liquid sensors : YES 9. Platform overload detection : YES 10. Oil skimmer : YES 11. Digital control unit with color screen, 3D notifications, time regulator (up to 80 min.) and temperature regulator (up to 80C) 12. Transport box : Safety wooden packing. WARRANTY 24 months ----- We also offer smaller machines from this series with a platform diameter of 700mm and 900 mm ----- 35 YEARS OF EXPERIENCE IN THE PRODUCTION OF AUTOSERVICE WASHING EQUIPMENT

Condition: good (used), Year of construction: 2003, NAGEL MODEL TBT M320-6 6 SPINDLE CNC HORIZONTAL GUN DRILL, 2003 Equipped with: Panel Mate Power Pro Control Counter Rotation Cross Drilling High Pressure Coolant System Auto Loader Cajdpertrztefx Abboa Magnetic Chip Separator Hydraulic System Chiller Specifications: Maximum Drill Depth (Approx): 16" Maximum Drill Length: 36" Number of Drill Spindles: 6 Spindle Motors (3): 7.5HP HP Per Spindle: 3.75 Drill Head Slide Stroke: 16.9" Maximum Diameter Mild Steel: 0.750"

Condition: excellent (used), PRO XS4 MANUAL ELECTROSTATIC AIRBRUSH SPRAY GUN GRACO REF. 244580 - Brand: GRACO - Reference: 244580 -PRO XS4, SMART, BOQ. 1,5 MM., 85KV. - For solvent-based paints. -General industry, metal, wood. -Hose not included - Second hand product totally revised. Codpfohydcqsx Abbsaa - VAT not included

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✅✅✅Energy class A+++✅✅✅ €1750 EX. VAT (transport costs on request) ►►Buy It Now◄◄ This product is only sold outside Europe. ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ✨Sprays all powders with ease, coats complex geometries with outstanding efficiency and quality, and gets it done in the toughest of environments. This paint gun set is designed with stronger and more stable structure. ✨Works with any powder: Today you are faced with the challenge of spraying a wide variety of paints and chemicals. PROTON CLASSIC gives you the power and control you need to get the best possible finish from any powder. ✨Optimal ergonomics: The lightweight, ergonomically designed gun offers better balance and feel in hand, allowing you to position it comfortably for better coverage and faster coating. ✨Regardless of the conditions: No matter where you are, you will be new to the Coat PROTON CLASSIC perfectly. Whether in the heat or cold, PROTON CLASSIC delivers under dry or damp conditions excellent functionality and performance for any required coating environment. Caodpfsc Utdrjx Abbsa ✨These devices can take a beating... Industrial pistol design from a single source, Die-cast pump and carriage in steel construction ensure unparalleled toughness and durability in each withstand the coating environment. All equipment is new, not used. Do you want a special configuration ❗ Call us now❗ ✅WE OFFER SPECIAL SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, PRODUCE AND INSTALL SPECIALLY FOR YOU.✅ ☀️ 2 YEAR WARRANTY ☀️ *This product is only sold outside Europe.

Condition: used, Year of construction: 1999, x-travel 4000 mm y-travel 1000 mm z-travel 1500 mm Cajdoxzuz Njpfx Abbja Control Heidenhain 355 weight max. 10 t ja more pictures available

Condition: new, Year of construction: 2025, travel distance X-axis: 1,200 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 32,000 m/min, torque: 108 Nm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, workpiece weight (max.): 800 kg, table width: 600 mm, table length: 1,400 mm, table load: 800 kg, rotational speed (max.): 12,000 rpm, overall weight: 9,000 kg, coolant supply: 20 bar, spindle nose: SK 40 BIG PLUS, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, SPECIAL CLEARANCE SALE AT DISCOUNTED PRICE BRAND NEW MACHINING CENTRE Control and motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, handwheel) Additional equipment: Prepared for 4th axis (rotary table) Full enclosure with side folding inspection windows Cjdpfsxx S Tdsx Abboaa Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm This offer applies only to this LAGUN L1200 stock machine (interim sale reserved).

Condition: excellent (used), Güntner GVH 102B/2x2N air-cooled condenser Patented Güntner support tube design All fans in ISO F configuration Performance data in R404A Condenser block: The refrigerant-carrying core tubes are relieved of stress by the patented support tube design. This results in increased leak resistance. Copper pipe Ø 12 mm, 50 x 25 mm offset Aluminum fins, 2.4 mm spacing Copper distribution and collection pipes and pipe connections Permissible pressure: ps=28 bar Permissible temperature: ts=100°C Fans: Low-noise axial fans with maintenance-free motors with IP54 protection, three-phase 400/3/50, according to DIN 40050 Design: Caodpsq A Tunofx Abbja Insulation class F Permissible conveying medium temperature -30 to +55°C All three-phase fans are generally available with 2 speeds (Δ-Y switching) and speed-controlled via Güntner control units Case: Galvanized and painted sheet steel, RAL 7032 Rated power: 369.5 kW Air volume flow: 93,800 m³/h Number of Fans: 2 x 2 Motor P = 2200W I = 4.20A (400V) n = 650 min Rated voltage: 400V Other items in different sizes – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Mobile Star Screen with conveyors with hook lift Codsxywa Sopfx Abboaa

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Codpexx Tmrofx Abboaa Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: excellent (used), The tilt scale is fully functional. Codpfx Ajphph Iebboaa The scope of delivery includes: 01x inclination scale, used Manufacturer: Rapido-Werke dim.: approx. 1.250 x 1.360 x 2.250 mm (WxDxH) maximum load: 750 Kg feet: 04x / height adjustable with tare compensation Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 16,722 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,200 rpm, controller model: Heidenhain iTNC 530, Submission of a bid obligates the buyer to collect the machine by the end of this year! TECHNICAL DETAILS Travel X: 4,000 mm Travel Y: 1,200 mm Travel Z: 1,000 mm Maximum spindle speed: 4,200 rpm Tool holder: SK50 DIN 69871 Table load capacity: 10,000 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Operating hours Control unit on-time: 47,181 h Machine on-time: 45,697 h Program running time: 16,722 h EQUIPMENT Csdpfx Absxx Uayeboaa 45° diagonal milling head with 2.5° indexing Drum-type tool changer with 24 tool positions (vertical tool change) Machine enclosure: front guard with 2 doors Rear guard with additional door Side slats for machining of extra-long workpieces Longitudinal chip conveyor (discharge on right-hand side) Control cabinet air conditioning Swivel arm for machine control (operation from front and rear)

Condition: used, static maximum load 4,000 kg diameter 160 mm height 35 mm thread M 16 x 1.5 levelling height 20 mm weight 2.2 kg - 95 units on stock - new - Codpfxofii Dio Abboaa price per unit  

Condition: used, LAUDA Heat Transfer System ITH350/25kW – Industrial Temperature Control Unit For sale is a high-quality heat transfer system from LAUDA, model ITH350/25kW. Ideal for industrial applications, laboratories, or production processes requiring precise temperature control. Features: - Robust construction, reliable for continuous operation - Precise temperature control over a wide range - IP54 protection – dust and splash-proof Technical Data: - Model: ITH350/25kW - Item No.: LSI 51807 - Mains voltage: 400 V / 3~ / PE / 50 Hz - Power consumption: 28.5 kW - Current consumption: 41 A - Permissible temperature [TS]: +20°C … +350°C - Protection class: IP 54 Heat transfer circuit: - Medium: Marlotherm SH - Minimum flow rate: 1 m³/h - Nominal diameter: DN 25 - Max. permissible operating pressure: 10 bar - Weight: approx. 700 kg - Condition: used Cedpfxoxr Dgvo Abbsaa Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: new, functionality: fully functional, mileage: 1 km, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.1 l/h, color: yellow, overall weight: 1,230 kg, empty load weight: 1,230 kg, operation weight: 1,230 kg, maximum load weight: 670 kg, lifting power: 670 kg/m, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, shovel volume: 0.16 m³, Year of construction: 2025, machine/vehicle number: 123, Equipment: additional headlights, cabin, head guard, The GG300K is a versatile skid steer loader that combines reliability, power, and modern technology. Ideal for light to medium-duty tasks, it offers precise control and robust performance on challenging terrain. Engine and Drive System Powered by a Kubota D1105 water-cooled three-cylinder engine with a displacement of 1.123 liters, producing 25 hp (18.4 kW) at 3000 rpm. Fuel consumption ranges from 1.3 to 1.5 l/h, ensuring economical operation. The oil change quantity is approximately 4 liters. Hydraulic System Equipped with Hengli V90C23HT1 and Tianjin Walking 316 pumps (each delivering 48 l/min) operating at a pressure of 16 MPa. The pilot-operated multiway valve ensures accurate control, while the Hengli BMER-600 motor with a displacement of 600 ml provides efficient drive on rough terrain. Performance and Capacity Codpfx Aexy Tdyobboaa With an operating weight of 1230 kg and a rated load capacity of 300 kg, the GG300K is suitable for medium-duty construction and agricultural tasks. It offers a gradeability of 30%, a tipping load of 670 kg, and a bucket capacity of 0.16 m³ for efficient material handling. Dimensions and Maneuverability Transport dimensions are 2655 mm in length (with bucket), 1985 mm in length (without bucket), 1000 mm in width, and 1810 mm in height. The maximum loading height is 2260 mm, the dump height is 1725 mm, and the ground clearance is 176 mm, providing versatile usability. Specification Engine brand: Kubota Engine model: D1105 Maximum power (horsepower): 25 hp Maximum power: 18.4 kW Maximum speed: 3000 rpm Displacement: 1.123 liters Number of cylinders: 3 Cooling method: Water-cooled Theoretical fuel consumption: 1.3-1.5 L/h Hydraulic oil tank capacity: 32 liters Fuel tank capacity: 32 liters Gear pump brand: Tianjin Walking Gear pump model: 316 Main pump brand: Hengli Main pump model: Closed pump V90C23HT1/RNB2S12KA1-LP01 Maximum main pump flow: 48 L/min Multiway valve: Pilot-operated Rated pressure setting: 16 MPa Hydraulic travel motor type: Hengli BMER-600 Travel motor brand: Hengli Drive motor displacement: 600 Performance Range Operating weight: 1230 kg Safe load capacity: 300 kg Maximum load capacity: 670 kg Bucket capacity: 0.16 m³ Travel speed: 8 km/h Gradeability: 30% Bucket width: 1000 mm Main Dimensions Transport length – with bucket: 2655 mm Transport length – without bucket: 1985 mm Transport width: 1000 mm Transport height: 1810 mm Maximum dump height: 1725 mm Maximum loading height: 2260 mm Maximum dump reach: 508 mm Minimum ground clearance: 176 mm

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Codsxx Ti Tjpfx Abboaa Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Application: suitable for laid gratings Casdpfxjn Tprno Abbja for mesh size approx. 33 x 33 mm Included in delivery: 01x clamp fastening, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 100 x 32 x 15 mm (LxHxW) 01x bracket, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 50 x 25 mm 01x threaded rod M8, II. choice (virgin material) total length: approx. 100 mm 01x square nut M8, II. choice (new goods) Material color: hot-dip galvanized Total weight: 0,120 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, functionality: fully functional, 4 pieces of used adjustable wheel clamps for recovery crane, etc., fully functional. No shipping available. Cjdpjx Agklefx Abbeaa Please do not send email inquiries. If you have any questions, we are happy to assist you by phone. Viewing and collection are only possible by prior telephone appointment. Subject to changes, prior sale, and errors. We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: new, BRAND NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 CNC Control HEIDENHAIN Package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 1,500 mm Y-axis (cross-ram): 1,300 mm V-axis (cross-column): 1,000 mm Rotary table (C-axis): 2,000 x 2,000 mm Max. load capacity up to 15,000 kg Automatic universal swivel head 1° x 1° (optional with fixed quill Ø 210mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Maximum spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm ATC - Tool changer: 60-station (vertical/horizontal change) Cedpfx Ajq I Nkbobbeaa Double hinged belt chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be answered.

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Cedpsxwmkujfx Abbeaa Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: new, mileage: 1 km, power: 11.77 kW (16.00 HP), fuel type: diesel, color: yellow, overall weight: 1,000 kg, empty load weight: 1,000 kg, operation weight: 1,000 kg, lifting height: 2,610 mm, tire size: rups, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, digging bucket width: 430 mm, Year of construction: 2024, Equipment: additional headlights, adjustable boom, crane, hydraulics, rubber tracks, GG1100 The mini excavator GG 1100 with 3 cylinder Kubota engine is a 1T weighing machine with a swivel frame/knuckle boom and adjustable chassis. Description The latest model GG1100 from Günter Grossmann Each machine from Günter Grossmann is composed of quality parts. The GG1100 model is a well-equipped machine for the most demanding contractors in construction, electricity and hydraulics. Excavators are made based on advanced technologies. We guarantee after-warranty service and we have spare parts in stock in Europe Price list Cedpfxsp Aruxo Abboaa EUR 10,500.00 Includes: GG 1100 + container 380 mm SPECIFICATIONS Model: GG 1100 Brand: Günter Grossmann Operating weight: 1000kg Boom: articulated arm / swing arm Track: Hydraulically adjustable Bucket capacity: 0.025 cbm Bin width: 380 mm, Engine: Japanese Kubota Cylinders: 3 cylinders Power: 16 hp Main pump: Wanye hydraulic Rotary engine: Dali driving work engine: Dali Movement speed: 1.5 km/h MAIN DIMENSIONS Total dimensions (DxSxW): 2770x936x1490 mm Total track length: 1230 mm Chassis width: 896 mm Track width: 200mm Chassis ground clearance: 132 mm Track height: 320 mm WORK SPACE Max. digging depth: 1650 mm Maximum digging height: 2610 mm Maximum digging radius on the ground: 2890 mm Turning circle: 360° Max height of the dozer blade max.: 345 mm Max. depth dozer blade: 255 mm

Condition: new, travel distance X-axis: 850 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 48,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 7, workpiece height (max.): 450 mm, workpiece diameter (max.): 750 mm, workpiece weight (max.): 500 kg, rotary table diameter: 630 mm, rotational speed (max.): 12,000 rpm, overall weight: 14,000 kg, coolant supply: 40 bar, spindle motor power: 32 W, spindle nose: SK 40 BIG PLUS (BVD 40), number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Brand new 5-axis simultaneous machining center Casdpop Nnutefx Abbea HEIDENHAIN TNC 7 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) Additional equipment: Renishaw OMP 60 wireless probing system Renishaw NC 4 laser tool control system HEIDENHAIN KKH 125 calibration sphere with KINEMATICS Full enclosure Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Only inquiries from Germany will be responded to

Condition: new, FACTORY-NEW MACHINING CENTER HEIDENHAIN TNC 7 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 650 mm Y-axis: 700 mm Cedpfx Abehy Artjboaa Z-axis: 645 mm Table diameter: 410 mm Maximum workpiece diameter: 500 mm Maximum spindle speed: 12,000 rpm (oil-cooled with MQL) Spindle taper: SK 40-BIG PLUS (BVD 40) Maximum spindle motor power: 17 kW ICS – internal coolant supply – 20 bar Rapid traverse X, Y & Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC – automatic tool changer with double gripper: 30 stations (expandable up to 80 tools optional) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will be answered / Only inquiries from Germany will be processed.