Used Memobike 6050 for sale (118)

Condition: new, Year of construction: 2023, load capacity: 4,990 kg, lifting height: 4,700 mm, fork length: 1,600 mm, total length: 4,470 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 Gedpfoxd Ep Nsx Aaxebl - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: used, Year of construction: 2023, load capacity: 4,990 kg, lifting height: 4,700 mm, fork length: 1,600 mm, total length: 4,470 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik Gbodexd Hflopfx Aaxsl - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: used, Year of construction: 2023, load capacity: 4,990 kg, lifting height: 4,705 mm, total length: 4,580 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 Godpfx Aoxd Hqzjaxebl - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: used, machine/vehicle number: 12067, Year of construction: 2020, operating hours: 6,641 h, load capacity: 5,000 kg, lifting height: 4,780 mm, free lift: 1,480 mm, load center: 600 mm, construction height: 2,500 mm, fork length: 2,400 mm, front tire size: 355/45-15, rear tire size: 21x8-9, overall weight: 6,000 kg, enginetype: Electric, manufacturer: Still Gsdpew R Aggofx Aaxebl

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,221 h, load capacity: 5,000 kg, lifting height: 3,480 mm, fuel type: electric, mast type: simplex, construction height: 2,650 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery voltage: 80V Battery year of manufacture: 2020 Side shift, fork positioner, Gbsdpevr Nqkjfx Aaxjl 3rd valve, 4th valve, heating, full cabin, air conditioning,

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 5,000 W, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 2,400 kg, TECHNICAL DETAILS Travel Distances X-axis travel: 6000 mm Godpfx Asxbfn Teaxobl Y-axis travel: 2000 mm Z-axis travel: 115 mm Laser power: 5,000 W Maximum workpiece weight: 2,400 kg Maximum positioning speed parallel/simultaneous X-axis: 200 m/min Maximum positioning speed parallel/simultaneous Y-axis: 282 m/min MACHINE DETAILS Laser type: CO2 TLF 5000 Electrical connection: 105 kVA / 400 W (± 10%) / 50 Hz (± 1%) / 3-phase / 160 A Gas consumption CO2: 1 l/h Gas consumption N2: 6 l/h Gas consumption He: 13 l/h EQUIPMENT - Automatic pallet changer - Longitudinal belt conveyor - PlasmaLine-PMS (Plasma Monitoring System) - SprintLine - Blasting - Gas flushing - Immersion - Marking - ContourLine - AutoLas Plus - PierceLine Note: The LiftMaster is not included in the scope of sale and delivery.

Condition: used, total length: 500 mm, The price is for 1 piece of ROBOT EXTENDER Code: KRC2 360-500 ROBOT EXTENDER Length: 25 cm & 50 cm Brand: KUKA Condition: USED Extender – 50 cm | Price: €1,300 Gbodpfomrqwysx Aaxel

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 63,800 h, machine/vehicle number: A0270 A0050, control type: CNC control, controller manufacturer: TRUMPF, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 63,800 h, laser power: 5 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, table length: 6,050 mm, working length: 6,050 mm, working width: 2,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 2,000 mm, power: 87 kW (118.29 HP), overall weight: 24,000 kg, total length: 11,700 mm, total width: 3,900 mm, total height: 2,600 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, In working condition. Can be inspected in the workshop Gbodpfx Aajxl Dt Ajxjl

Condition: like new (used), Year of construction: 2019, operating hours: 4,594 h, load capacity: 1,600 kg, lifting height: 6,050 mm, fuel type: electric, mast type: triplex, construction height: 2,580 mm, Manufacturer + model:LINDE R 16 - Mast:3F6050 ID:25043.7271 Cat.:Used Mast:3F6050 Lowered height:2580 mm Gedpfx Aey Itfpsaxobl Lifting height:6050 mm Capacity:1600 kg Year:29 Hours:4594 hours Capacity:48 v / 775 ah Options:FULL options ; PANORAMA glass roof !! 2 - LED Spotlight on mast !! Air-sprung SEAT with heating !! Emergency LAMP on the back !! USB & 12 volt connection !! Radio !!

Condition: like new (used), Year of construction: 2019, operating hours: 4,770 h, load capacity: 1,600 kg, lifting height: 6,050 mm, fuel type: electric, mast type: triplex, construction height: 2,580 mm, Manufacturer + model:LINDE R 16 - Mast:3F6050 ID:25043.7275 Cat.:Used Mast:3F6050 Lowered height:2580 mm Lifting height:6050 mm Capacity:1600 kg Year:29 Hours:4770 hours Capacity:48 v / 775 ah Options:FULL options ; PANORAMA glass roof !! 2 - LED Spotlight on mast !! Air-sprung SEAT with heating !! Gsdpfx Aoy Itfceaxjbl Emergency LAMP on the back !! USB & 12 volt connection !! Radio !!

Condition: good (used), Year of construction: 1993, Used Darley guillotine shear Type VS 6008 Capacity 6050 x 8 mm Gbsdpsyzf Snefx Aaxjl Machine fully operational, frame needs to be welded (see last photo)

Condition: new, Year of construction: 2025, Description AORE PG6020: (12 Kw) We can deliver this type Laser cap. from ( 20 Kw) A Compact Design with Complete Protection (CE) table length 6050 mm table width 2050 mm Godpfxeiyun Re Aaxjbl laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 12 overall dimensions 14.000 x 3.400 x 2.400 mm weight of the machine ca. 13.450 kg Furnishing: - Max-photonics Laser source 12 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 12 Kw ) - normal steel 35 max 40 mm - stainless steel 30 mm - aluminium 16 mm - brass 12 mm - copper 10 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 6000 mm - Y-axis travel 2000 mm - Z-axis travel 375 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (23 second max for changing) - automatic change, max load on tables 2.400 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 6 part trolly under work table Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 11,500 h, input voltage: 380 V, input current: 44 A, stroke length: 265 mm, table length: 6,050 mm, oil tank capacity: 250 l, total length: 8,500 mm, total width: 3,350 mm, total height: 3,250 mm, overall weight: 22,000 kg, Equipment: CE marking, safety light barrier, Pressure: 220 t Bending length: 6050 mm Approx. weight: 22,000 kg Dimensions (LxWxH): 8500 x 3350 x 3250 mm CNC Press Brake DURMA AD-S 60220 (6 m x 220 t) Technical specifications: Gedpfxjy H D Nvs Aaxebl Manufacturer: DURMA Model: AD-S 60220 Year of manufacture: 2008 Bending length: 6050 mm Pressing force: 220 tons Axes: Y1, Y2, X, R, Z1, Z2 + CNC-controlled crowning Motor power: 22 kW Equipment and highlights: CNC crowning – motorized adjustment from the control panel CNC-controlled backgauge 2 sheet support arms on linear guides Laser safety device according to CE (Lasersafe) on the upper beam 11,500 operating hours Available from 15/8/26

Condition: new, Outer dimensions (width x height): 80 x 80 mm Overall length: 6050 mm Divided into: 2x25/30/35/40/45/50/3x100/11x500 mm Permissible load: 200 t/m Material 42CrMo4, hardened (plasma deep-nitrided: hardness approx. 700 HV, 58 - 63 HRC, depth 0.4 - 0.5 mm), Gbodpfey N S Irox Aaxjl ground

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data: Bending force: 600 tons bending length: 6050 mm passage between the uprights: 5100 mm stroke: 365 mm Installation height: 700 mm Projection: 510 mm table height: 990 mm table width: 154 mm Y High speed: 80 mm Y Working speed: 7 mm/sec. Y retraction speed: 80 mm/sec. X axes working speed: 350 mm/sec. R axes working speed: 300 mm R Axes travel distance: 250 mm X axis distance: 750 mm Godpfx Aefir U Njaxebl Engine power: 55 kW length: 8050 mm width: 3200 mm height: 4250 mm Weight: 72000 kg Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment Control unit - ModEva Premium , 69T and 66T CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes Bil0h3uvee R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement

Condition: good (used), Meiko Dishwasher (Type DV 270.2) with inlet table (featuring rinse sink with mixing tap), outlet table and exhaust hood. On the opposite side, there is an additional rinsing table (featuring double sink and mixing tap). Equipped with 3 doors, 400 Volt power connection, water connection, lighting, meter box, fuses, main switch, soap dosing station, soap and paper dispenser, boiler, water softening system, and hand wash basin with slop sink. Fitted with 2 roof windows and a lifting frame. Attention!! No keys present. Length: 6050 mm Width: 3010 mm Height: 3150 mm Connection power (V): 400 Gbedpfjyxnb Tox Aaxol

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data: AD-R 60400 Bending force: 400 tons bending length: 6050 mm passage between the uprights: 5100 mm stroke: 365 mm Gbedpfx Ajfin Hweaxsl Installation height: 630 mm Abroad: 510 mm Optional foreign diameter: 750 mm | 1000 mm | 1250 mm table height: 1220 mm table width: 154 mm Y Fast speed: 120 mm/sec. Y Working speed: 8 mm/sec. Y Retraction speed: 100 mm/sec. X axes working speed: 250 mm/sec. R axes working speed: 140 mm/sec. R axes travel: 250 Engine power: 37 kW length: 7500 mm width: 2110 mm height: 3710 mm Weight approx. 35 tons With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally renowned manufacturers in their sector, whose products are sold in 120 countries. With the branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here here we are your direct contact person from the ranks of Durmazlar, who will competently assist you with advice and practical support when it comes to machines for sheet metal processing. Our demonstration center gives you the opportunity to get an overview of our

Condition: new, cutting diameter 570 mm saw band length 7250 x 41 mm cutting width 1,3 mm capacity 90 degrees: square 550 x 550 mm capacity 90 degrees: flat 550 x 700 mm total power requirement 4 kW weight of the machine ca. 6050 kg required space 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting Gbjdpfx Aasymf Sdsxel - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: used, mileage: 386,260 km, power: 350 kW (475.87 HP), first registration: 09/2020, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,700 mm, loading space width: 2,480 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, navigation system, parking heater, soot filter, Mercedes-Benz 3248 Arocs Platform Truck + PK48002 Crane 8x2 Suspension: Leaf-air Wheelbase: 6.05 m Payload: 12,025 kg PALFINGER Crane Type: 48002-EH 6x Hydraulic Extensions 4x Hydraulic Outriggers 1x Remote Control Platform bed: Length: 6.70 m Width: 2.48 m Height: 0.80 m Special equipment: Axle load measuring system, Front axle load 8.0 t, Trailer brake 2-line system, Connections left, Audio system: Digital radio DAB / DAB+, Equipment package: Media, Passenger-side mirror with maneuvering position, Battery 220 Ah, Side-by-side battery arrangement, CB radio, Interactive multimedia cockpit, Air horns (2) on cab roof, Electrical pre-installation in cab 24V / 100 A, Cab: Electro-hydraulic tilting device, Cab: Reinforced rear suspension, Cab: Steel sprung, comfort, Front suspension: 8.0 t, 3-leaf springs, Remote Online pre-check function, Tinted front window with sun screen band, Alternator 150 A, Speed limiter system, 12-speed transmission - Type: G 281-12, Rear axle crown wheel 485, Interior filter for construction vehicles, Cooling box / refrigerator, Illuminated Mercedes star, Reinforced engine brake, Reinforced engine mounting, Trailing axle 8 t steered, liftable, unloadable, Navigation system, PTO MB 123-10c, Configurable special module, Wheelbase version 6050 mm, Chassis lowering with air bellows residual pressure regulation, Chassis overhang 2200 mm, Rain sensor, Reverse warning buzzer and flashing warning lights (external warning signal), Fleet management system interface, Drawers under platform railing, Circuit breaker, Seat cover/upholstery: passenger seat velour, Seat cover/upholstery: driver’s seat velour, Cab seating: driver's comfort suspension seat, External sun visor, Side window sunblinds, Driver and passenger door, Cab door extension, Pre-installation for 4 surround cameras (display via onboard monitor), Preparation for beacon, Additional thermal insulation, Additional heater (water), Transmission oil cooler Additional Equipment: Axle configuration: 8x2/4, Heated starting/front mirrors, Trailer socket 24V / 15-pin, Arocs 5, Exhaust to right side, Two-piece exhaust system, Exhaust pipe bow over 2nd axle, Compressed air connection in cab, Steel air tanks, Gedpfxoyvmk Is Aaxjbl Condensate monitoring on air system, Medium-sized air unit, Automatic driving light activation (light sensor), Cab: fixed entry, Cab: L ClassicSpace, 2.30 m wide, 170 mm tunnel, Suspension: leaf/air, Electric window lifters, No rear cab window, AdBlue tank: 25 L, Manual lifting roof (steel), Comfort locking system, Fuel tank: 290 L aluminum, left, Unregulated steering pump, Multifunction steering wheel, Steering oil cooling, Air intake behind cab, 2-cyl. air compressor, Heated air dryer, Engine 12.8 L - 350 kW R6 diesel (OM 471), engine variant OM 471, Ramp mirror, Residual heat utilization, Disc brakes partially shielded, Disc brakes front and rear axles, LED flashing side marker lights, Servotwin power steering, Cab seating: functional passenger seat, Front mudguards, Front axle stabilizer, 12V socket in passenger footwell, Steel front bumper corners, Tachograph / EC control device, Automatic daytime running lights, Truck Data Center 7 (fleet management system), Rear underride guard fixed, Front underride protection, Pre-installation for Truck Data Center (fleet management system), Dropped front axle, Regulated water pump, Permissible GVW 32,000 kg We are happy to assist you as well...

Condition: excellent (used), Year of construction: 2005, Working area X: 6050 mm Working area Y: 1300 mm 4-axis Electrospindle Door milling unit Tool changer with approx. 24 positions Worktable with 10 beams Chip conveyor belt Safety mats Gsdpfey Nfmusx Aaxobl Weight approx. 6400 kg Includes 16 clamps, suction cups, and Freud cutters for wooden and wood-aluminium profiles 68/82/92, and spare electrospindle Ideal machine configuration for windows, frames, and doors

Condition: used, Year of construction: 2017, Working hours laser on: 28.313 h Working hours beam on: 8.421 h Laser power: 6000 Watt Gbjdpfxoyrfxzo Aaxsl Working range laser: 3048 x 1524 x 70 mm Max. steel: 25 mm Max. stainless steel: 30 mm Max. aluminium: 30 mm Max. copper: 12 mm Max. brass: 12 mm Length: 11000 mm Width: 6050 mm Height: 2565 mm Machine weight: 12000 kg Electrical connected load: 31 kW Standard configuration - Maximum positioning speed parallel axis x, y: 120 m/min- Maximum simultaneous positioning speed: 170 m/min- Positioning accuracy Pa: +/- 0,05 mm- Repeatability Ps: +/- 0,025 mm- Maximum workpiece weight: 1100 kg- Operation via panel: ByVision Touchscreen and manual control unit Extended machine accessories - nozzle changer 40 positions- Detection Eye - Cut Control- Power Cut Fiber Automation - ByTrans Extended

Condition: ready for operation (used), Year of construction: 2008, Zinser 2325-N Working area: 3100 x 6050 mm 1x straight oxy-fuel torch No filter unit included. Control upgraded in 2021. Gedewwtzpopfx Aaxebl More information in the attached documents.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 197600 € 3734.64 € 400 to 6050 mm 3 365 mm 5100 mm 510 mm 630 mm hydraulisch 120 mm/s 8 mm/s 100 mm/s 750 mm 350 mm/s 300 mm/s 250 mm 1220 mm 154 mm 500 l 37 kW 7500 mm 2110 mm 3810 mm 34660 kg 3 axes (Y1, Y2, X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form Gedpfx Ajyui R Teaxsbl - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devided and cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKAS mounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... PRICE FCA TÜRKIYE OPTIONS (PRICES ON REQUEST): R-axis R/Z1/Z2-axes DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Hydraulic tool clamping systems

Condition: good (used), Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, blind conveyor belt, slat conveyor belt, transfer station -Transfer station: Conveyor belt with tipping function, comes from blind production -Speed: 10 m/min -Conveyor belt width: 6050 mm -Conveyor belt length: approx. 880 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Transport dimensions: 6050/910/H960 mm Gbsdpfxeptf H Ds Aaxsl -Weight: 520 kg

Condition: ready for operation (used), functionality: fully functional, mileage: 436,000 km, power: 264.78 kW (360.00 HP), first registration: 05/2017, fuel type: diesel, maximum load weight: 138,000 kg, overall weight: 26,000 kg, tire size: 315/80r22.5, axle configuration: 6x4, wheelbase: 6,050 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 9,250 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, Year of construction: 2017, Equipment: ABS, air conditioning, car registration, compressor, hydraulics, navigation system, onboard computer, spoiler, tail-lift, traction control, IVECO STRALIS AT260S36Y\FS D - Chassis WJME62RP90C368060 Year 05/30/2017 - EURO 6 Mechanics: Cursor 9 – 310 HP – 8790 cc – km 458,523 Transmission Traxon 12 speed Body: white color IC194 Tyres: dim. 315\70r22.5 Gbsdpjq Iu Nbsfx Aaxol STRUCTURE: Wheelbase 6050 mm - Active Time cabin - Stralis Evo - Front suspension + Rear suspension pneumatic – Full pneumatic, Third steering axle with lift Gross weight: 260 Q.li - Payload: 138.15 Q.li TECHNICAL EQUIPMENT TRUCK: Cursor 9 engine – 360 HP – 8790 Cc, 12tx 1810 Td gearbox, Expansion Module – Can Open Interface, Front and rear pneumatic suspension – Full Pneum, Third steering and liftable axle, Climate control, Independent air heating, Towing version, Abs (Electronic Brake System + Brake Assist System), Aebs (Abs – Asr) + Bas, Esp, Immobilizer, Cruise Control Adaptive, Engine Brake With Retarder Function, Ldws Lane Detection System, Power Steering, Electronic Speed Limiter, 135 Lt Heated Urea Tank, 640 Lt Aluminum Fuel Tank, Steel Air Tanks, At Evo Mhr Cabin, 1 Bed In Cabin, Opening Roof, Central Locking, Connectivity Box, Removable Refrigerator, LED Drl Daytime Running Lights, Integrated Fog and Driving Lights, Pneumatic Driver's Seat, Electric and Heated Rearview Mirrors, Sun Visor, Height-Adjustable Spoiler EQUIPMENT: FIXED BODY WITH FRENCH-STYLE FIXED FRAME Internal useful dimensions approximately 9.25 * 2.48 h 2.70 RETRACTABLE TAIL LIFT Brand: DHOLLANDIA - Serial Number: 17030319 - Lifting capacity 20 Q.li Documents: Nationalized - Approval certificate