Used Maurer Stages for sale (2,732)

Condition: excellent (used), Year of construction: 2016, LAMELLA – CASE CLAMP PRESS Hnodpfxjw Td A Ie Aaceu GANNOMAT “CONCEPT 70 ECO” Complete in standard configuration including: - Sturdy, torsion-resistant steel frame, constructed with welded and bolted assemblies - UPPER lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements - Lamella pressure beams feature the tried-and-tested tolerance compensation system (Ganner system) for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir - Clamping is electromotor-driven, with two separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously adjustable electronically using two potentiometers and regulated via frequency inverters, providing a completely wear-free press force control - Pressing force for horizontal beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for vertical beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speeds of the pressure beams with fine positioning, switchable via 3-stage selector: 5 / 10 / 25 mm/sec - Extremely user-friendly operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Overhauled by Ganner, with 6-month parts warranty Location: ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 2012, Serial number: W09STTB3NBEN1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18972 Specifications: - 2012 model - 3 axle - Turn on 3 axles - Lift on 1 axle - Box space - Tvinge fasteners - Extension at 5.5 metres - Internal length on 1. stage: 4,422 m - Internal length on 2. stage: 9,021 m - Total internal length: 13,475 m - Ready for delivery Description: Everything work as it should according to the new owner. Ready for delivery Hjdsvgx Syspfx Aacenu Technical approved: Yes EU-approved until: 02.04.2026 Own weight: 10560 Total Weight: 50000 Payload: 39440 Width: 255 Length: 1378

Condition: good (used), power: 86 kW (116.93 HP), fuel type: diesel, color: yellow, Year of construction: 2004, operating hours: 6,025 h, Equipment: air conditioning, Technical information Drive: Wheel Make of engine: BDR00438 Top speed: 34 km/h Empty weight: 13.800 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: BDR00438 Hnsdpexgvg Rofx Aaceu Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Output of the auxiliary hydraulics: 190 l/min Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 8,3x2,55x3,12 Production country: DE Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: excellent (used), Centrifugal pump, high pressure pump, water pump, multi-stage vertical centrifugal pump, booster pump, pressure intensifier pump, high pressure centrifugal pump -Manufacturer: Lowara, high-pressure centrifugal pump type SV809F40T -Engine power: 4 kW -Flow rate: 6 - 14 m³/h -Head: 112 - 60 m -Pipe connection Ø 38 mm / bolt circle 106 mm see photos -Dimensions: 285/245/H950 mm -Weight: 48 kg. Hnodpfx Aov Aumrsacou

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 25 mm throat 255 mm bore stroke 135 mm spindle turning speed range 8, von 105-2900 U/min table-size 500 x 350 mm column diameter 100 mm spindle taper MK 3 total power requirement 0,65 / 0,9 kW weight of the machine ca. 190 kg Hjdpewqr Ibofx Aacenu dimensions of the machine ca. 0,5 x 0,5 x 1,7 m Unused exhibition machine at a special price: New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Construction principle "Arboga - Sweden", maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 degrees around the column,chip protection with electr. Switch, drilling depth indicator. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: used, This listing is for the Pierre Guerin 1000L Fermenter. The unit is in full working condition and is ready for immediate use. Overview The Pierre Guerin 1000L Fermentation System is a high-capacity, stainless steel bioreactor/fermenter engineered for process development, scale-up, and clinical or commercial production. With a working volume of approximately 700–800 litres, this system bridges pilot and production scale, delivering robust performance, exceptional process control, and full compliance with GMP and FDA requirements. Built by Pierre Guerin, a global leader in sanitary stainless steel process systems, the 1000L fermenter is ideal for demanding applications in biotech, pharmaceutical, food, and industrial biotechnology sectors. Key Features Advanced Bioprocess Control Automated Regulation: Precise control of pH, DO, temperature, agitation, antifoam, and feeding, with optional cascade control strategies. SCADA Integration: Seamless connectivity with Siemens, DeltaV, or Rockwell Automation for full process automation and data logging. Sterile Processing: Designed for SIP (Steam-in-Place) and CIP (Clean-in-Place) operation for maximum sterility and cleanability. Robust, Hygienic Design 1000L Total Volume with up to 800L working volume, ideal for late-stage development and pre-commercial production. 316L Stainless Steel Vessel: Internal surfaces electropolished to Ra ≤ 0.6 μm for hygienic and corrosion-resistant performance. Jacketed Construction: Provides accurate temperature control via integrated thermal fluid systems. Technical Specifications Model: Pierre Guerin 1000L Fermentation System Total Volume: 1000 liters Working Volume: Approx. 700–800 liters Vessel Material: 316L stainless steel Surface Finish: Ra ≤ 0.6 µm (electropolished), optional ASME BPE compliance Sterilization: Fully SIP-capable Hjdsxgqcmepfx Aaconu Agitation: Top- or bottom-mounted agitator with mechanical seal Temperature Control: Jacketed vessel with PID regulation Sensor Ports: For pH, DO, temperature, level, pressure, and foam control Applications Pharmaceuticals: Production of therapeutic proteins, enzymes, and vaccines Biotechnology: Cultivation of microbial, yeast, or mammalian cells Food & Beverage: Probiotics, fermentation-derived ingredients Industrial Biotech: Fermentation of biofuels, organic acids, and fine chemicals R&D and Pilot Production: Seamless scale-up from lab-scale to commercial batches System Components 1000L jacketed stainless steel fermenter with dished head and conical bottom High-efficiency agitator with variable speed drive Integrated control system with touchscreen HMI Gas flow regulation via MFCs (Air, O₂, CO₂, N₂) Foam and level control with automated dosing Sampling valve, exhaust condenser, and sterile utility connections CIP/SIP spray devices and drainable piping Quality Assurance Pierre Guerin systems are designed and built to meet global regulatory standards including GMP, FDA, and ASME BPE. Each system undergoes rigorous FAT (Factory Acceptance Testing) and can be delivered with full IQ/OQ documentation, 3.1 material certificates, and orbital weld documentation. Benefits High Productivity: Large working volume supports batch, fed-batch, or continuous processes Scalable Design: Mimics lab-scale conditions to ensure reliable scale-up Superior Cleanability: Full CIP/SIP compatibility and sanitary design Automation-Ready: Compatible with advanced control platforms Regulatory Compliance: Built for use...

Condition: new, Year of construction: 2025, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed Hjdpfx Aecnxa Seacsnu solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: good (used), power: 250 kW (339.91 HP), fuel type: diesel, color: yellow, Year of construction: 2021, operating hours: 6,068 h, Equipment: air conditioning, Technical information Chassis type: articulated AdBlue system: Yes Make of engine: C9.3 Top speed: 40 km/h Empty weight: 24.900 kg Functional Lifting capacity: 17.421 kg CE mark: yes Condition Hnsdpsxgi Diofx Aacou Technical condition: good Visual appearance: good Identification Serial number: CAT0972MCR1Z00938 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Output of the auxiliary hydraulics: 385 l/min Emission level: Stage V / Tier V Delivery terms: EXW Transport dimensions (LxWxH): 9,315x2,991x3,636 Production country: FR Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: as good as new (ex-display), Year of construction: 2025, The captivating advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working climate due to diagonal low-turbulence air flow. Large airflow window due to air baffles - therefore also suitable for larger workpieces. Separation efficiency of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² - therefore long filter life! Hnodecnz Iqspfx Aaceu Easy and quick filter change on the front side. Inexpensive replacement filters. Low purchase costs and extremely low energy consumption. Dry splashboard made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fibre filter as after-filter unit. Ex-fan incl. throttle valve mounted on the left. Do not compromise on the quality of the surface. Easy Paint extraction walls are the ideal cost-effective solution for effective collection and filtering of paint mist and extraction of solvent vapours. Robust and powerful but economical in consumption. The IPE double filtration system provides two filter stages for a maximum separation efficiency of up to 99 %. The cardboard labyrinth filter initially absorbs considerably more overspray (up to 18 kg/m² filter surface) than conventional filter mats due to the folded filter pockets. The downstream glass fibre secondary filter absorbs only the finest residual particles. As a guide value, the cardboard labyrinth filter, depending on

Condition: good (used), power: 55 kW (74.78 HP), fuel type: diesel, color: yellow, Year of construction: 2019, operating hours: 1,737 h, Technical information Chassis type: articulated Empty weight: 5.600 kg Make of engine: C3.3B Top speed: 35 km/h Functional Lifting capacity: 4.427 kg Bucket capacity: 1,3 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: CAT0906MPK5600456 Other information Front tyres / undercarriage remaining: 80 Hodpfxoxgi Dcs Aaconu Rear tyres remaining : 80 Output of the auxiliary hydraulics: 115 l/min Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 5,639x1,89x2,651 Production country: UK Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: as good as new (ex-display), Year of construction: 2025, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood Hodpfxjdqzbrj Aacjnu required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: good (used), power: 90 kW (122.37 HP), fuel type: diesel, color: orange, Year of construction: 2015, operating hours: 7,839 h, Equipment: air conditioning, Technical information Drive: Wheel Make of engine: AM-4JJ1X Top speed: 35 km/h Empty weight: 16.880 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: HCMLAA5ZJ00060387 Other information Hsdpfx Ajxgi A Sjaconu Front tyres / undercarriage remaining: 70 Rear tyres remaining : 60 Output of the auxiliary hydraulics: 180 l/min Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 8,23x2,53x3,13 Production country: JP Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: new, Year of construction: 2025, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Hjdpfx Aasw Sgnkjconu Available: at short notice

Condition: good (used), power: 90 kW (122.37 HP), fuel type: diesel, color: orange, Year of construction: 2014, operating hours: 6,644 h, Equipment: air conditioning, Technical information Drive: Wheel Hnjdpfx Aoxgi A Eoacju Make of engine: AM-4JJ1X Top speed: 35 km/h Empty weight: 16.880 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: HCMLAA5ZE00060138 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Output of the auxiliary hydraulics: 180 l/min Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 8,23x2,53x3,13 Production country: JP Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running due to precision aggregates and high dead weight Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side Hnodpfx Aaodqzcxeceu With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Speed indication via LED at the front Aluminum stop jaws Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), power: 230 kW (312.71 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 9,205 h, Equipment: air conditioning, Technical information Chassis type: articulated AdBlue system: Yes Hnedpfx Aexgi Axsaceu Make of engine: DC09 085A Top speed: 40 km/h Empty weight: 23.500 kg Functional Lifting capacity: 18.000 kg Bucket capacity: 4,2 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: HHHW700PG0000093 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 70 Tyre brand: BKT Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 8,74x3,1x3,59 Production country: KR Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: new, Year of construction: 2024, Description The universal ones with V-belt drive and high-quality equipment. Especially suitable for craftsmen. These compressors are used where quality of compressed air as well as durability and efficiency are essential, long service life thanks to 2-stage high performance units with low speed, specially machined cast iron cylinders for minimum oil consumption and long service life, high performance valves, optimum cooling due to large fan impeller, motor with overload protection, easy draining of condensate due to standard mounted ball valve 1/2", standard with Condor pressure switch and manometer, standard on safety stand pallet with swinging elements, tank manufactured according to German regulations AD 2000. Further links to "GEWEMA Stationary piston compressor type GEKOMP BK119-270-10V". Technical data Suction capacity: 650 l/min Filling capacity: 520 l/min. Maximum pressure: 10 bar Tank capacity: 270 l Technical data "GEWEMA Stationary piston compressor type GEKOMP BK119-270-10V". Hjdpfx Aaohk Dd Uecjnu Maximum pressure: 10 bar Suction capacity: 650 l/min Filling capacity: 520 l/min Motor power: 4 kW/400 V Cylinder/stages: 2/2 Speed: 920 min-1 Tank capacity: 270 l Location: Ex stock 54634 Bitburg - immediately available-

Condition: good (used), power: 381 kW (518.02 HP), fuel type: diesel, color: yellow, axle configuration: 6x6, Year of construction: 2017, operating hours: 11,996 h, Equipment: air conditioning, all wheel drive, Technical information AdBlue system: Yes Make of engine: C18 ACERT Top speed: 55 km/h Empty weight: 33.400 kg Functional Cargo space capacity: 25.000 l CE mark: yes Hjdpsxgi Arefx Aaconu Condition Technical condition: good Visual appearance: good Identification Serial number: CAT0745CCTFK01626 Other information Max. working load: 41000 kg Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,429x3,53x4,041 Production country: UK Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: new, Year of construction: 2025, Technical data: Suction capacity 510 l/min. Filling capacity 400 l/min. Maximum pressure 10 bar Tank capacity 90 l Cylinder/stages 2/1 Speed 1.300 min/1 Motor power 3 kW/ 400 V Description: The universal with V-belt drive and qualitative equipment especially suitable for craftsmen for use where compressed air quality, durability and efficiency are essential long life thanks to high performance low speed units safe transport and excellent stability thanks to large wheels with parking brake Optimum cooling thanks to large fan impeller aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air better efficiency due to optimised aggregates Hsdpfx Aashk Dfkecenu Standard with: Condor pressure switch Pressure gauge Pressure reducer with water separator and Rectus quick coupling Motor with overload protection Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), power: 376 kW (511.22 HP), fuel type: diesel, color: yellow, axle configuration: 6x6, Year of construction: 2016, operating hours: 14,240 h, Equipment: air conditioning, all wheel drive, Technical information AdBlue system: Yes Make of engine: C18 ACERT Top speed: 55 km/h Empty weight: 33.400 kg Hsdjxgi Alspfx Aacsnu Functional Cargo space capacity: 26.500 l CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: CAT0745CTTFK01398 Other information Max. working load: 41000 kg Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,429x3,53x4,041 Production country: UK Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm Hnedpeg U Uv Uofx Aaceu T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: good (used), power: 240 kW (326.31 HP), fuel type: diesel, color: yellow, axle configuration: 6x6, Year of construction: 2016, operating hours: 8,782 h, Equipment: air conditioning, all wheel drive, Technical information AdBlue system: Yes Make of engine: OM936LA Top speed: 50 km/h Empty weight: 22.885 kg Functional Cargo space capacity: 18.000 l CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: B93A631EH01206854 Other information Tyres remaining: 80^80^80^80^80^80 Max. working load: 28000 kg Emission level: Stage IV / Tier IV final Hnsdexgi Afopfx Aacou Delivery terms: EXW Transport dimensions (LxWxH): 9,953x2,985x3,426 Production country: DE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: new, Year of construction: 2025, Hoku BK119-270-10-VKK upright piston compressor with refrigerant dryer, automatic condensate drain, oil-water separator, pre- and fine filters, mounted with rubber vibration dampers on a safety pallet. Hnjdpfx Aaer Ig Aheceu Universal piston compressors with belt drive and high-quality features. Pressure vessel manufactured according to German AD 2000 regulations. Intake capacity: 650 l/min Effective delivery rate: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor power: 4 kW/400 Volt Air throughput: 650 m³/h Motor power: 4 kW Machine dimensions: 1200 x 800 x 2000 mm Pressure vessel: 270 L Effective delivery volume: 520 L/min Intake volume: 650 L/min Maximum pressure: 10 bar Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, For sawing, milling, planing/thickness planing and optional slot drilling in confined spaces High-precision format sliding carriage made of anodized aluminum, various lengths Large extension arm (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional fence flaps Max. Saw blade Ø 315 mm, tiltable from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° backwards Four milling speeds up to 10000 min-¹, manually adjustable With right-left rotation of the milling spindle Heavily ribbed dressing tables made of stress-free gray cast iron for decades of stability and flatness 2-stage feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch, motor protection switch Fixed hand wheels Dimensions and weights Weight (net) approx. 857kg Dressing table Dressing table width 410mm Dressing table length 2000mm chip removal max. dressing 5mm Connection suction Suction port diameter 3 x 120mm Suction port diameter saw blade guard 60mm Installation information Required space length 5960mm Space requirement width/depth 5140mm Explanation of space requirements The dimensions take into account maximum travel distances or useful lengths. Working area length 1600mm Working area width/depth 1600mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Thickness Thickness table length 757mm Thickness table width 423mm Working height thickness min. 3mm Working height thickness max. 230mm Chip removal max. thickness 5mm Electrical data Supply voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5,0kW Sliding carriage and table sliding table length 2660mm Format sliding carriage width 360mm format sliding carriage height 142mm table length 1250mm table width 430mm table height 900mm Milling spindle spindle inclination 0 - -45 spindle mandrel diameter 30mm useful length of spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min⁻¹ Milling tool diameter max. Tool diameter max. lowerable 210mm tool diameter max. lowerable 45° 150mm tool diameter max. tenon milling 275mm Planer cutterhead Type of cutterblock TERSA planing shaft diameter 87mm Number of planing knives 4pcs planing shaft speed 5200min-¹ Circular saw unit trimming length 2600mm Hedpfxjih Dxle Aacenu Cutting width with rip fence 900mm Max. Cutting width left of saw blade 3260mm saw blade inclination 90 - 45 Max. Cutting height at 90° 90mm Max. Cutting height at 45° 63mm Max. Saw blade projection 90° 100mm Max. saw blade Saw blade projection 45° 71mm Diameter (main) saw blade 315mm Explanation Diameter (main) saw blade with scoring device Speed (main) saw blade 4000min-¹ Feed rate Feed speed 6 - 12m/min Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 2017, condition: excellent (used), Stationary piston compressor with 500 L tank Air outlet ¾" Dimensions and weights Length (product) approx. 2020mm Width/depth (product) approx. 570mm Height (product) approx. 1340mm Weight (net) approx. 245kg Electrical data Supply voltage 400V Mains frequency 50Hz Output power 5,5kW Hnodpfx Aaolczl Uscou input power 6,52kW Noise emission Sound pressure level Lp 83dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Compressor Compressor system HOS Suction capacity approx. 950l/min Filling capacity approx. 750l/min Explanation Filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 960min¯¹ Compressed air tank Maximum pressure 10bar Tank capacity 500l Location: Ex stock 54634 Bitburg - immediately available -