Used Material Shelf for sale (15,663)

Condition: used, mileage: 450,000 km, first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, * DAF XF 480 FT 4x2 tractor unit * ADR equipment * Automatic transmission * Retarder * Parking air conditioning * Automatic climate control * Auxiliary heater * 1x bed * Leather seats * Front leaf suspension * Rear air suspension * Mileage: approx. 450,000 km * Year of manufacture: 03/2023 * Accident: Front damage * Engine, transmission, water cooler, frame, axles, and cab are in good condition. * The engine runs perfectly, the vehicle is ready to roll. * Tel.: call (Contact · Telephone · Mobile · WhatsApp) ---- Air conditioning: Automatic climate control Gisdpfey Ikv Sex Amust * Parking air conditioner Hydraulic system: None Safety: Retarder/Intarder

Condition: used, Year of construction: 2008, operating hours: 16,160 h, 2008 | Sennebogen 850R with hydraulic rotating grapple | Used Material Handling Excavator | 16160 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 165000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 47 approved ✅ 9 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Machine is operational with normal wear for 15,000 hours, some minor oil leaks. Turret brake needs inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32948 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Giodsx Ti T Hjpfx Amuet

Condition: used, functionality: fully functional, Year of construction: 2007, - Machine in good working condition Godpfxoy Rfmqj Amusit - Immediately available - Including Arden sorting grapple

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 50 kg, power: 1.1 kW (1.50 HP), tank capacity: 10 l, Material Conveying Unit Simar FX 2504 Motor Power: 1.1 kW (brushed motor) Power Supply: 230 V / 50 Hz Container Capacity: approx. 5 litres Conveying Performance: approx. 150 – 200 kg/h (depending on material) Maximum Conveying Distance: approx. 15 – 20 meters Pipe/Hose Diameter: 38 mm (DN 38) Housing Material: Polished stainless steel Gijdpfjy Hlv Rex Amuet Colorant Doser Simar FDX-2 Drive Type: Stepper motor (high RPM repeatability) Power Supply: 230 V / 50 Hz Speed: Infinitely adjustable (depending on control unit, typically 0.1 – 200 rpm) Color container capacity: approx. 5 – 10 litres

Condition: used, Year of construction: 2014, Sennebogen material handler 835 Gisdpjyfx Shofx Amust    • 11,376 operating hours    • 6-cylinder water-cooled engine    • Dutch machine    • Equipped with central lubrication    • Solid rubber tires    • 4 stabilizers    • Cameras for all-round visibility    • Joystick control    • 2 units available! Condition: Used Year of manufacture: 2014

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 1 kW (1.36 HP), Simar FX 2004 Material Conveyor Motor power: approx. 0.9 – 1.1 kW (brush motor) Power supply: 230 V / 50 Hz Gisdsy Hldnopfx Amujt Container volume: approx. 3 – 4 liters Conveying capacity: approx. 60 – 100 kg/h Hose connection diameter: 38 mm (standard) Filtration: Polyester filter with automatic cleaning Simar FDX-2 Colorant Feeder Drive type: Stepper motor (high repeat accuracy of speed) Power supply: 230 V / 50 Hz Speed: Infinitely adjustable (depending on the control unit, typically 0.1 – 200 rpm) Colorant container capacity: approx. 5 – 10 liters Two units available Price: 950 EUR per unit!

Condition: good (used), Year of construction: 2016, functionality: fully functional, overall weight: 50 kg, power: 1.1 kW (1.50 HP), tank capacity: 3 l, Motor power: 1.1 kW (brushed motor) Power supply: 230 V / 50 Hz Container volume: approx. 5 litres Delivery rate: approx. 150 – 200 kg/h (depending on material) Max. conveying distance: approx. 15 – 20 metres Pipe/hose diameter: 38 mm (DN 38) Gisdpfx Amjy Hk I Sjuet Casing material: Polished stainless steel

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, overall weight: 20 kg, power: 1 kW (1.36 HP), tank capacity: 3 l, Motor type: Single-phase (brush motor / vacuum blower) Motor power: approx. 1.0 – 1.1 kW Power supply: 230 V / 50 Hz Container volume: approx. 3 liters Delivery capacity: up to approx. 100 kg/h (depending on the bulk density of the material and hose length) Hose connection diameter: DN 38 (standard) Housing material: Stainless steel (V2A) Giodpfjy Hk D Tsx Amust Control: Microprocessor-controlled, programmable filter filling and cleaning times 2 units available Price: 480 EUR / unit

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2.23024635/4097, overall weight: 15 kg, type of input current: AC, power: 1 kW (1.36 HP), tank capacity: 10 l, Motor power: 1 kW Supply voltage: 230 V AC (+/- 10%) Godpfxsy Hkyhj Amueit Frequency: 50–60 Hz Container volume: approx. 10 liters Conveying capacity: approx. 10–120 kg/h (depending on material and distance) Required compressed air connection: approx. 5 bar (for filter cleaning/control) Device weight: approx. 15 kg Material: stainless steel

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 103000050, load capacity: 250 kg, Equipment: documentation/manual, The MiR250 is a more flexible AMR – compact and powerful. The MiR250 features a small footprint of just 580 x 800 mm and a height of only 30 centimeters. Despite its size, it easily transports loads of up to 250 kg and can travel at speeds of 2 meters per second. This agility sets it apart from all other AMRs on the market and makes it particularly adaptable to demanding environments. Godpfsyf Etxjx Amujit Thanks to its compact design, it can navigate spaces with a width of just 80 centimeters. This means that doors and elevators, which might pose a challenge for other mobile robots, are no obstacle for the MiR250. The MiR250 is engineered for durability and can operate around the clock, with a battery that can be replaced quickly. Additionally, it meets the latest safety standards – which is why we believe it is the safest AMR on the market. It has so far only been used in laboratory conditions and has virtually no operating hours. Accessories: - Cable Charger Lite 48V, 3A, wired charger - WISE WLAN EA module 4060, 4x digital inputs, 4x relay outputs

Condition: used, Year of construction: 2018, functionality: unexamined, machine/vehicle number: 45940-30, overall weight: 2,150 kg, Large conveyor belt for sale Weight: 2150 kg Gijdpfsv N I E Ijx Amuot

Condition: used, Dimensions, width x depth x height approx. 1.15 x 0.55 x 1.95 m Gjdpjy Dcuxofx Amusit

Condition: used, We are offering used pallet racking for sale here. TECHNICAL DATA Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box section: 120 x 50 mm Bay load: 2,400 kg Colour: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 add-on bays consisting of: 2 starter bays + 8 extension bays 12 frames 40 beams 160 safety pins Yellow bumper guards (upright protection) can be purchased for €5.00 per piece net. PRICES Net price: €1,115.68 Gross price: €1,327.66 (incl. VAT) Available quantity: 350 m pallet racking Location: 14656 Brieselang – transport can be organized on request YOUR CONTACT PERSONS Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. Extra costs depend on the destination and shipment volume and can be quoted individually upon request. Giodpfey Dgcmsx Amuot TERMS OF PAYMENT Terms of payment are to be agreed upon in the case of an order. The price stated is per item/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT. ABOUT US DLK in Nordhorn specializes in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, We offer used pallet racks for sale here. TECHNICAL DATA Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box profile: 120 x 50 mm Bay load: 2,400 kg Color: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 add-on bays consisting of: - 4 frames - 12 beams - 2 locking pins The yellow collision protectors (upright protection) can be purchased for €5.00 each (net). PRICES Price: €360.00 net Price: €428.40 incl. VAT Available quantity: 350 m of pallet racking Location: 14656 Brieselang – Transport can be arranged upon request YOUR CONTACTS AT OUR COMPANY Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist with transport and assembly of the goods. This item is available for pickup. Delivery or shipping is possible for an additional charge. The extra costs depend on the delivery location and shipment size and can be requested individually from us. PAYMENT TERMS Payment terms are to be arranged in the event of an order. The price stated is per unit/net price or as specified in the item description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US Gsdpjy Dga Esfx Amuoit The company DLK in Nordhorn deals in new and used products from the fields of intralogistics, conveyor technology, mezzanine floors, textile warehouses, as well as machines for commerce, industry, and trades. We continuously offer a range of attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The building blocks for success from DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, mileage: 825,128 km, power: 340 kW (462.27 HP), first registration: 06/2016, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, parking heater, soot filter, FT XF 460 SC ICE WHITE Automatic temperature control and air conditioning Cab interior trim color: Earth White work lights Front mirror Basic immobilizer Upper bunk for luggage storage Tail lights with bulbs Stabilink rear axle suspension Halogen headlights Rear: 13.00 t, air suspension, SR1344 Traction control (ASR) Drive rear axle with disc brakes Front underrun protection Catwalk step on the left AdBlue tank 90 liters on left fender Passenger seat: Basic Fuel tank left side Front axle 1, 8000 kg, load index 156 Rear axle 1, 13000 kg, load index 149 Door trim made of fabric Soft-touch steering wheel, black Electronic Stability Control (VSC) Fog lights Electric windows Pollen filter Brake system EBS-3 Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS interface Driver Performance Assistant Storage compartment for trailer connections Central locking 24V sockets 2x7 pins + EBS, cabling 2x7 pins w/o EBS External sun visor, smoke gray, translucent Truck navigation radio, 6 speakers Air-suspended cab Rear axle 1: 315/80R22.5 Reversing warning system Digital tachograph, VDO Engine MX-13, 340 kW/462 HP. Cab badge: 460 Aluminum fuel tank 620 l, height 620 mm ZF intarder Alcoa Dura-Bright aluminum wheels 32 mm Auxiliary power supply 12V/20A, 24V/2x15A+2x40A Batteries in rear overhang, no spare wheel holder 12-speed AS Tronic 12AS2330 DD, 15.86-1.00 Front axle 1: 385/65R22.5 Eberspächer auxiliary air heater with timer Emission standard Euro 6 Top air intake with cyclone filter Space Cab - cab AS Tronic transmission, 12 speeds Wheelbase 3.80 m / rear overhang 0.99 m Front: 8.00 t, parabolic, standard, 165N, one ride height M8870 Ice white Gijdpjyz Hd Eofx Amuot Coolbox or refrigerator Extra-long catwalk with step Xtra Comfort mattress lower bunk PTO NAS/10bc-40/17/27 DAF Night Lock Truck phone Cab interior design, Argenta Driver's seat: Super Air Analog bodybuilder signals and warnings Rear axle ratio 2.79 Axle load monitoring Aluminum air tanks Adaptive cruise control with FCW and AEBS Signal horns, 2 sets Armrest driver's seat Lower bunk with 65-liter drawer Antennas: AM/FM, 2x GSM, GPS. Extra: CB Lane departure warning system ADR certificate CB radio speaker 2 beacon lights on lamp bar 2 flashing beacon lights 2 work lights behind driver cab, on top Schoch chrome lamp bracket 4 Hella blue-light H1s for Schoch lamp bracket Bycool compressor rooftop parking cooler 24V NATO socket on chassis / batteries in rear Compressed air gun in cab CB radio 40 channel Cold power socket for coffee machine Tipper hydraulics incl. separate tank 200l (factory only) Compressor

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) Gsdpeh R Taqsfx Amujit - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth Gijdpfxjmhhypj Amujt 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Gjdpfx Amemhh Dhsujit Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Giedpofdkb Tjfx Amujt - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Gsdpfjmhh Dzjx Amusit - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Giodpfx Aomhh Anjmuot Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany Gsdpfxjguk A Hs Amueit - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) Gijdpfxemhhy Nj Amuet - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Godoguk Dkopfx Amusit Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Godpfxsmhh Dto Amujit 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.