Used Market Stalls for sale (810)

Condition: used, mileage: 32,274 km, power: 355 kW (482.67 HP), first registration: 02/2024, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, next inspection (TÜV): 02/2025, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, navigation system, soot filter, STANDARD SPECIFICATION Mechanical cab suspension Adaptive Cruise Control with FCW and AEBS-3 Lane Departure Warning System Goodyear RR, not applicable Euro 6 emission class TraXon automated transmission, 12 gears Standard component layout Left-hand fuel tank DAF Connect Powertrain Plus Warranty - 3 years - 300,000 km Options Rear power take-off switch, version 2 Sleeper High Cab Front chassis version: no floor plate Exterior sun visor Signal horns, 1 set LED headlights and fog lights LED skylights Two LED headlights for rear cab wall Rear window: double-glazed No front mirror DAF Corner View Rear view camera, prepared Central locking, 3 keys, 2 remote controls Adjustable Short roof spoiler, Sleeper High Cab Roof spoiler color: Crystal White Leather steering wheel Dashboard finish: Plateau Cab interior trim: Argenta Door trim: Loosely woven fabric Driver's seat: Super Air Armrests on both sides of the driver's seat Passenger seat: Cinema andamp, table, fabric cover Refrigerator and drawer Extra Comfort mattress for lower bunk Upper bunk Protective net on both bunks Curtains with divider Automatic cab climate control Roof hatch with electric operation Accessory power supply: Standard 2x 40 A ECAS remote control with extended functions FMS connector, extended and prepared Toll preparation Digital tachograph, VDO 1C, version G2V2 Speed limit setting: 90 km/h Tachograph calibration DAF Infot. Exclusive pre-installed, luxury speakers Antennas: DAB-prepared, radio, 2x mobile antennas. GNSS Extra: CB Wireless Charger Rear View Alarm Turn Assist Ready Front: 8.00 t, Parabolic, 165 N Rear Axle 2, 8000 kg, Load Index 156 Axle Load Monitoring Leaf Spring Suspension, Front: Medium Front Axle(s): 385/65R22.5 Driven Rear Axle(s): 315/80 R22.5 2nd Driven Rear/Trailing Axle: 385/65R22.5 F1,385/65R22.5GO KMAXS2 160/000 K Steering BBA R1,315/80R22.5GO KMAXD2 156/150 L Traction DCA R2,385/65R22.5GO KMAXS2 160/000 K Steering BBA MX-13 engine, 355 kW/483 hp Cab emblem: 480 ECO performance No automatic idle shutdown Traction assist 15.0 t Rear axle ratio 2.64 Mechanical differential lock ZF Intarder Bedpfoui Dycex Adxjww Wheelbase 4.80 m / rear overhang 2.70 m Longitudinal member 310/7.0 mm, with internal adjustment front/rear Exhaust pipe right EAS unit right, horizontal 75 l exhaust tank left 620 l aluminum fuel tank left, height 620 mm Prepared for rear work lights Cross member D137 Rockinger coupling D130 Electrical connection for trailers, 24 V/15-pin Analog body signals and warnings Chassis with analog connection for engine speed control ECAS control CAN J1939 functions in the body connector Application connector product-market combination Application connector for the BB remote control Side marker lights Body mounting method BAM 1, console type B PTO engine rear, 1 o'clock, control without clutch, pump drive 130 A generator, 2 x 210 Ah AGM batteries Battery energy monitoring Dust shield Construction: S 21 with 210 mm frame, 50 mm support blocks (always specify when ordering) Additional container centering in the rear area, without support Hole pattern in the subframe for screw mounting (50 x 50 x 15) Screw-on underrun protection R58.03, hydraulically folds out 850 mm to the rear, final paint finish RAL 7021, including sensor and safety circuit, additional hydraulic section, 2 x 12 mm hydraulic lines to the rear

Condition: like new (used), functionality: fully functional, operating hours: 112 h, LIMITED EDITION No. 60 Cold Jet Limited Edition 20th Anniversary. COLD JET AERO 75 DX 20BAR 300PSI This machine is suitable for industrial cleaning, remediation, and large-scale projects. The key advantage of this unit is its minimal use of advanced electronics, making it one of the most robust and aggressive dry ice blasting machines available on the market. The machine is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine Complete with the Following Equipment: Bwsdpjw Ixcrsfx Adxow COLD JET AERO 75 DX DRY ICE Blaster (112 operating hours) Includes: - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles NEW Price: €21,800 This is one of the top-performing dry ice cleaning machines in the world. It contains no sensitive electronics, which makes it highly reliable and cost-effective to maintain. For inquiries or to schedule a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We provide repair and maintenance services for Cold Jet equipment and also supply new Cold Jet machines. Contact us for further information. Worldwide shipping available. Cold Jet dry ice machine for sale Dry ice machine for sale Dry ice blasting machine for sale Dry ice blaster for sale Buy dry ice blasting machine Dry ice blasting – dry ice blasting equipment | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machines for sale Dry ice blasting machines for sale Dry ice blasting machines Cold Jet various models Maintenance and repair of Cold Jet dry ice machines

Condition: used, Year of construction: 1997, operating hours: 6,799 h, load capacity: 3,500 kg, fuel type: gas, gearing type: automatic, Equipment: cabin, head guard, Forklift F 35 U Unladen weight: 5,200 kg Powered by LPG and petrol Very good condition Side shifter Trade-in & Exchange Possible Would you like to trade in or exchange your used vehicle? We are happy to purchase your old vehicle at market value. Please send us your vehicle details by email or give us a call. Registration Service: We are happy to assist you with the application for temporary license plates and export license plates. Despite careful data collection and vehicle assessment, discrepancies in equipment details, scope of delivery, or technical data may occur. The information is for vehicle presentation purposes only and is non-binding. Interim sale and errors are expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of purchase law. The contractual description is decisive. Bedpfxsulli Ee Adxjww

Condition: good (used), Year of construction: 2021, Medium-size baler, MACFAB, 150A – used -: Ex-site price: now only €2,950 (net) instead of €3,900 (net) Manufacturer: MACFAB Model: 150 AUTO HT Serial number: MFE1066 Year of manufacture: 2021 Serial number: 167317 Bale dimensions Height: 1,000 mm Width: 975 mm Depth: 800 mm Weight: up to 150 kg (depending on material) LOADING CHAMBER DIMENSIONS Height: 470 mm Width: 975 mm Depth: 800 mm Machine dimensions Height: 2,630 mm Width: 1,560 mm Depth: 1,030 mm Weight: 780 kg Transport height: 1,955 mm SPECIFICATIONS Power supply: 220 – 240 Volt, single phase Motor: 2.2 kW – 16 Amps Pressing force: up to 8 tons Noise level: 68 dB Cycle time: 40 seconds Bodpfow D E Uujx Adxoww A medium-sized vertical baler that compacts cardboard or plastic film into bales weighing up to 150 kg. Ideal for businesses such as supermarkets or retail stores generating a moderate volume of packaging waste. The large top door opening makes it easy to load materials into the bale chamber. Finished bales can be easily ejected onto a Euro pallet using the hydraulic ejection cylinder. The baler is equipped with three strapping points to secure the bales after pressing. Original price: €10,802 (net) Condition: good Availability: immediately Location: 68307 Mannheim

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 7,508 h, 💡 Unique Opportunity – Showroom Machine from Official Dealer This machine comes from the demonstration showroom of a former official Markforged and DWS dealer who operated in the Italian market until 2025. It was used exclusively for demonstration purposes, maintained in excellent condition, and has very few operating hours. Now available through 3D Machineries Srl, this represents a rare opportunity to purchase an almost new industrial 3D printer, at a fraction of its original cost – with immediate availability and full transparency on provenance and usage. Bedpfx Ajwzmgtodxsww -----LISTING DESCRIPTION----- Markforged – Complete Metal X System for Metal 3D Printing (Printer + Wash + Sintering Furnace + Accessories) 💰 New value over €200,000 For sale: complete Markforged Metal X system for metal 3D printing, including all necessary components for in-house metal part production using the bound metal printing process (FFF technology + debinding + sintering). ✅ The system comes from a showroom and is in excellent condition. Sale of individual components also considered. The package includes: 🔹 Markforged Metal X 3D Printer 🔹 Markforged Wash-1 – Debinding unit for binder removal 🔹 Markforged Sinter-2 – Industrial sintering furnace 🔹 Argon gas control panel – with reducers and quick couplings 🔹 Original Markforged case – with spare build plates 🔹 Mobile wheels for machine handling 🔹 Isolation transformer Key technical data: Printer model: Metal X (F-PR-5101) Sintering furnace model: Sinter-2 (F-SR-0002) Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Furnace power supply: 200–240 V AC 30+PE | 347–415 V AC 30+N+PE / 30 A Certifications: CE, FCC, UL, RCM, UKCA Assembled in the USA ✅ The Metal X system enables printing of stainless steel components (17-4 PH, 316L), pure copper, Inconel, and tool steel ✅ Ideal for machine shops, R&D departments, prototyping centers, and companies in the aerospace and automotive sectors 💡 The new value of the complete package is over €200,000. 📦 Option for separate sale: printer, wash unit, sintering furnace, accessories. 📩 Contact us to receive a detailed price list, images, videos, usage hours or to schedule an inspection.

Condition: used, mileage: 11,932 km, gearing type: other, fuel type: electric, color: red, overall weight: 1,330 kg, empty load weight: 700 kg, maximum load weight: 150 kg, number of seats: 1, first registration: 12/2016, emission class: none, suspension: other, Year of construction: 2016, operating hours: 11,932 h, driver cabin: other, fuel: electricity, The Linde P 60 Z tractor is a used, electrically powered three-wheel tractor, first registered on December 20, 2016. With a mileage of 11,932 kilometers and operating hours, the vehicle has a robust record of use. The red paintwork is striking and the machine has space for a driver. The tractor is powered by a 48V battery of type 3 EPZV 300, although a charger is not included in the scope of delivery. With a permissible total weight of 1,330 kg, the Linde P 60 Z can be used flexibly in various areas of application. It was previously used by a single owner and is now aimed primarily at commercial buyers or the export market. Interested parties can view the tractor without prior appointment from Monday to Saturday in Rohrbach (Palatinate). The seller also offers registration services and options for delivery within Germany for an additional charge. Bodpfx Ajr Uzixedxeww Sale only to traders (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, mileage: 944 km, power: 300 kW (407.89 HP), first registration: 05/2025, overall weight: 18,000 kg, fuel type: diesel, color: black, axle configuration: 2 axles, next inspection (TÜV): 05/2026, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day Cab * Mechanical cab suspension * Adaptive Cruise Control with FCW and AEBS-3 * Lane Departure Warning System * Goodyear * Euro 6 emission class * 12-speed TraXon automated transmission * Standard component layout * Left-hand fuel tank * DAF Connect * 3-year, 500,000 km Powertrain Plus Warranty Options * NH4 gearbox PTO version swap * Vision Package XD * Front chassis design: robust * Exterior sun visor * Horns, 1 set * LED headlights, cornering lights, and fog lights * Height-adjustable headlights * Two LED headlights for rear cab wall * Rotating beacons on front cab, prepared * Handlebar and lamp, surround: black, wall: blackout/window * Windshield with sun protection film * Rear window: Double-glazed * Curbside window on passenger door * Rearview camera, prepared * Central locking, 3 keys, 2 remote controls * Mirror housings in cab color * Headlight bezel color: cab color * Bumper color: cab color * Door trim: Loosely woven fabric * Driver's seat: Luxury Air * Armrests on both sides of the driver's seat * Passenger seat: Cinema and/or table, fabric upholstery * Armrests on both sides of the passenger seat Bwodpfepbwynox Adxow * Red seat belts * Dashboard table * Cooler or refrigerator * Automatic cab climate control * Auxiliary heater with waste heat pump and timer * Driver's side roller blind * Roof hatch with electric operation * ECAS remote control with extended functions * FMS connector, extended and prepared * Toll preparation * Digital tachograph, VDO 1C, version G2V2 * Speed limit setting: 90 km/h * DAF Infotainment Luxury Plus, Exclusive loudspeaker * Antennas: DAB-prepared, radio, 2x mobile antennas GNSS Extra: CB * Wireless Charger * Reverse Alarm * Front: 8.00 t, Parabolic, 165 N * Front Axle 1, 8,000 kg, Load Index 156 * Axle Load Monitoring * Front Leaf Spring Suspension: Medium * Front Axle(s): 315/80 R22.5 * Driven Rear Axle(s): 315/80 R22.5 * Black Steel Disc Wheels * Black Wheel Center Caps * F1,315/80R22.5GO KMAXS2 156/150 L Steering CBA * R1,315/80R22.5GO KMAXD2 156/150 L Traction DCA * MX-11 Engine, 300 kW/408 HP Cab Badge: 410 * ECO Performance * None Automatic idle shutoff * 12-speed TraXon transmission 12TX2010 DD, 16.69-1.00 * Rear axle ratio 2.71 * Mechanical differential lock * MX engine brake * Spring-loaded brake cylinder on the first front axle * Parking brake assist * Wheelbase 3.80 m / rear overhang 1.15 m * Longitudinal member 260/7.0 mm, without internal reinforcement * Exhaust pipe on the right * Preparation for rear work lights * Taillights with LEDs * Use with drawbar, type plate, up to max. GVW * Cross member D137 Ringfeder coupling D137 * Pneumatic connection for trailer, swivel coupling * Electrical connection for trailer, 24 V/15-pin * Analog body signals and warnings * Chassis with analog connection for engine speed control * ECAS control * CAN J1939 functions in the body connector * Application connector product-market combination * Application connector for the BB remote control * Additional taillight wiring * Side marker lights * Body mounting method BAM 1, console type B * First transmission PTO N./4c-U-32/25 * Generator 110 A, batteries 2x 230 Ah * Battery energy monitoring * Max. GVW drawbar/coupling 57,000 kg * Max. gross combination weight drive system 44,000 kg Class 2 * Dust shield BODY: Three tipping hooks, middle and upper

Condition: like new (used), Year of construction: 2012, operating hours: 191 h, functionality: fully functional, compressed air connection: 20 bar, pressure: 20 bar, Cold Jet Aero 40 HP This machine is suitable for industrial cleaning, from routine tasks to very large projects. The advantage of this unit is its lack of next-generation electronics, making it straightforward and robust. It is considered one of the most aggressive and effective machines on the market. The machine is in excellent condition. Cold Jet Aero 40 HP Dry Ice Blasting Machine – Complete with the Following Equipment: - COLD JET AERO 40 HP DRY ICE BLASTER (191 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) Price: €19,500 This is one of the best machines available worldwide. It contains no electronic control systems, which makes it extremely reliable and reduces maintenance costs. For inquiries or to arrange a viewing, please contact DrDryice. All machines are sold with a 1-year warranty. We offer repairs and maintenance for Cold Jet machines and also supply new Cold Jet models. Contact us for more information. Worldwide shipping available. Relevant keywords: Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting machine Dry ice blasting machine | dry ice blaster | dry ice cleaning Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Bwsdpjwyk Uxofx Adxow Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale dry ice blasting machine for sale Cold Jet dry ice blasting machines various models Maintenance and repair of Cold Jet dry ice machines

Condition: used, Year of construction: 1999, operating hours: 7,835 h, load capacity: 3,000 kg, fuel type: gas, gearing type: automatic, Equipment: cabin, head guard, Forklift A 30 U Unladen weight: 4,100 kg Runs on LPG and petrol Very good condition Bsdpfsulltwex Adxsww Sideshift Trade-in + exchange possible Would you like to trade in your used vehicle or exchange it? We are happy to purchase your old vehicle at market price. Please send us the vehicle details by email or call us. Registration service: We are happy to assist you with the application for temporary license plates and export plates. Despite careful data collection and vehicle assessment, there may be discrepancies in equipment data, scope of delivery, and technical specifications. The information is provided to present the vehicle and is non-binding. Interim sale and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in terms of contract law. The description in the purchase agreement is decisive.

Condition: good (used), mileage: 886,157 km, power: 324 kW (440.52 HP), first registration: 10/2013, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 355/50R22,5, fuel: diesel, wheelbase: 5,100 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 5,050 mm, Year of construction: 2013, Equipment: ABS, air conditioning, cruise control, parking heater, retarder, traction control, trailer coupling, = Additional Options and Accessories = - 2nd Diesel Tank - Digital Tachograph - Tachograph (Control Unit) - Hydraulic System - Alloy Wheels - Power Take-Off - Pump - Winch - Additional Braking System = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 8380 kg, Gross weight: 19000 kg, Total tank capacity: 800 liters, 2nd Diesel Tank, Trailer hitch, Kingpin diameter: 50 DIN, Number of locks: 1, Winch, Alloy Wheels, Suspension type: Full air, Cruise control, Tachograph (Control Unit), Digital Tachograph, Air conditioning, Auxiliary heating, Color: White, Engine power: 324 kW (434 Hp), Euro: 5, Transmission type: AS-Tronic, Gears: 12, Additional braking system, Retarder brand: Intarder, Power steering, ABS, ASR, hydraulic system, power take-off, PTO type: 1, maximum number of vehicles: 1, pump = Further information = Transmission Transmission: 12-speed, automatic Bedpfx Ajuxxvasdxoww Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: Tire size: 355/50R22.5; steered; left tire profile: 9 mm; right tire profile: 8 mm Axle 2: Tire size: 295/55R22.5; twin tires; left tire profile inside: 2 mm; left tire profile outside: 4 mm; right tire profile inside: 2 mm Tire tread, right outer: 3 mm Dimensions Dimensions (L x W x H): 855 x 255 x 361 cm Weight Curb weight: 8,380 kg Payload: 10,620 kg GVW: 19,000 kg Functional Max. number of cars: 1 Pump: Yes Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 2 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 10100074, Year of construction: 2023, operating hours: 20 h, 💡 Unique Opportunity – Ex-Dealer Showroom Machine This machine comes from the demo showroom of a former official Markforged and DWS dealer, who was active on the Italian market until 2025. It was used exclusively for demonstration purposes, maintained in excellent condition, and has extremely low operating hours. Now available through 3D Machineries Srl, this is a rare chance to purchase an industrial 3D printer in practically new condition at a fraction of its original cost – ready for immediate delivery with complete transparency regarding its origin and usage history. -----LISTING DESCRIPTION----- Bwjdpfx Aswzmhwodxjw DWS – XPRO SL – 3D Stereolithography (SL) Printer 📍 REF: 10100074 – SN: C362922 – Year: 2023 🆕 DEMO UNIT – USED ONLY FOR CLIENT TESTS DWS Digital Wax XPRO SL professional 3D printer, designed for high-precision applications with SLA (Laser Stereolithography) technology. This machine is as good as new, manufactured in 2023, and was used solely for brief demonstration testing at the official DWS showroom. It is perfect for companies seeking a professional plug-and-play system at a significantly lower cost than new equipment. ✅ Key technical data: Model: DIGITAL WAX XPRO SL REF: 10100074 SN (Serial Number): C362922 Year of manufacture: 2023 Origin: DWS showroom display Condition: Excellent – minimal use (only for testing) Technology: SLA (Laser Stereolithography) Manufacturer: DWS Srl – Thiene (VI), Italy Made in Italy ⚙️ Technical features (generic for XPRO SL model): Ideal for: aesthetic and functional prototypes, high-precision components Ultra-high resolution: for fine details and industrial-grade surface finishing Compatible with: wide range of DWS resins (transparent, technical, elastic, functional) Proprietary software included Intuitive controls and user interface Connections: USB / Ethernet ✅ Perfect for industrial design, jewellery, dental labs, biomedical/medical, precision mechanics 💡 Unique opportunity: 2023 machine, virtually new, at a significantly reduced price compared to the official list. 📩 Contact us for further details, additional photos, the official DWS price list, or to arrange a viewing of the machine.

Condition: new, The Turnado 280/2000 is a remarkable example of the Conventional Horizontal Lathes category, showcasing the best features of the Engine Lathes group. This KNUTH machine combines a robust construction with a powerful motor to offer a high level of versatility designed to meet various production requirements. Proven over 20 years in the market, the Turnado series is adaptable due to its extensive standard equipment, including a quick-change toolholder system, three and four-jaw chucks, and a 3-axis position indicator that maximizes precision in machining tasks. With a heavy cast iron bed that supports large workpieces and a user-friendly control panel, operators can easily handle complex machining processes, ensuring efficiency and safety. You will appreciate the automatic feed shut-off for repetitive tasks, along with features like a coolant system and protective shield. For reliable performance and outstanding quality, particularly in demanding applications, you can request a quote for the Turnado 280/2000 today, and experience the excellence of KNUTH's Conventional Horizontal Lathes and Engine Lathes. Bwodpfx Ajuzk S Esdxew

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 20 h, total length: 1,000 mm, total height: 500 mm, total width: 500 mm, type of input current: AC, overall weight: 550 kg, temperature: 280 °C, ambient temperature (min.): 15 °C, ambient temperature (max.): 28 °C, positioning accuracy: 0.1 mm, wall thickness: 1 mm, space requirement length: 2,715 mm, space requirement height: 2,765 mm, space requirement width: 2,170 mm, High-performance materials: Best-in-class print heads With its nozzles, the STUDIO G2 is ready for printing with fiber-reinforced and other industrial-grade materials at maximum speed and precision. The specially designed extruder achieves a high level of detail with layer thicknesses as low as 0.1 mm on objects up to one meter long. This allows for more options for perfecting a part's mechanical properties. Optimal printing temperatures: The temperature-controlled build chamber The STUDIO G2's enclosed, temperature-controlled print chamber creates perfect conditions for printing with industrial-grade materials. The transparent doors allow users to visually monitor the printing process with safe and easy access to the print bed. User-friendly features such as automatic pausing when the housing is opened ensure a smooth and safe printing process. Independent Temperature Control: Heated Filament Chambers The STUDIO G2's integrated heated filament chambers ensure that the printing materials remain dry in a constantly controlled environment, guaranteeing print quality unmatched in this class. The filament chamber exceeds industry standards by offering temperature control independent of the print room. Bodpfx Aewgbcyedxjww Optimal Print Temperatures: Fast-Heating Print Bed Low setup time thanks to a fast-heating print bed. Increased bed temperature up to 100°C improves adhesion for a wider range of materials. New inductive sensor for fast, precise semi-automatic bed leveling. Simple & Intuitive: The New Slicer The user-friendly BigRep "BLADE" slicing software allows for greater control over printing parameters and offers presets for all BigRep-compatible materials, enabling a quick, hassle-free start to print. BLADE is one of the fastest and most precise slicers on the market, specifically optimized for large-format printing. Large enough for every idea: The large print area Create space for innovation with the STUDIO G2's large 500 mm x 1000 mm x 500 mm print area, packed into a compact housing and with features optimized for fast, high-resolution printing of large-format, industrial-grade parts.

Condition: used, Year of construction: 2008, operating hours: 256 h, functionality: fully functional, compressed air connection: 9.6 bar, operating pressure: 10 bar, Cold Jet Aero 75 This machine is ideal for industrial cleaning, heavy-duty, and large-scale projects. Its key advantage is the absence of complex modern electronics, making it highly reliable and straightforward to maintain. Recognized as one of the most aggressive and efficient machines available on the market, this particular unit is in excellent condition. Cold Jet Aero 75 Dry Ice Blasting Machine Complete with the Following Equipment: - COLD JET AERO 75 DRY ICE (256 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Coldjet Applicator - 2 x Nozzles (NEW) Price: €16,500 Considered one of the best machines worldwide—no onboard electronics, ensuring reliability and low maintenance costs. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines are sold with a 1-year warranty. We also perform repairs and maintenance on Cold Jet machines, and supply new Cold Jet units. Get in touch for more information. Worldwide shipping available. Bjdpfx Aswynncodxoww Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dry ice blaster for sale buy dry ice blasting machine Dry ice blasting machine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines – various Cold Jet models Service and repairs for Cold Jet dry ice machines

Condition: used, maximum load weight: 39,600 kg, overall weight: 47,000 kg, axle configuration: 3 axles, first registration: 08/1998, Equipment: ABS, Floor trailer FLO 17 30 H2 with Kennis crane 14,000 kg Air and steering axle Bwedpfsulltdex Adxow Building material transport trailer Trade-in + exchange is possible Would you like to trade in or exchange your old vehicle? We would be happy to buy your old vehicle at market price. Send us the vehicle data by email or call us. Registration service: We would be happy to help you apply for short-term license plates and export license plates. Despite careful data collection and evaluation of the vehicle, there may be deviations in the equipment data, scope of delivery and technical data. The information is intended to present the vehicle and is non-binding. Subject to prior sale and errors. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description in the purchase contract is decisive.

Condition: used, mileage: 18,983 km, power: 110 kW (149.56 HP), first registration: 09/2011, overall weight: 18,000 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, maximum load weight: 9,400 kg, empty load weight: 8,600 kg, tire size: 295/60R22.5, fuel: diesel, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, Year of construction: 2011, operating hours: 18,983 h, total length: 9,300 mm, number of seats: 2, construction height: 2,900 mm, Equipment: ABS, air conditioning, onboard computer, The Mercedes-Benz KAMAG WBH 25 Wiesel is a used transfer vehicle that was registered in 2011. With a mileage of 213,221 km and 18,983 operating hours, it is robustly usable. Powered by a 4,249 cm³ diesel engine with an output of 110 kW (150 hp) and equipped with a Euro 3 emissions class, the vehicle offers an automatic transmission. It is painted in striking yellow and has 2 doors and 2 seats. The vehicle is equipped with a fifth wheel coupling and has air conditioning and Webasto equipment. It was specially designed for tradesmen in agriculture, freelancers and for the export market. In addition, it has only one previous owner, which makes its history transparent. The dimensions are 9,300 mm in length, 2,550 mm in width and 2,900 mm in height. With a permissible total weight of 18,000 kg, the Mercedes-Benz Bwjdpsr Uzm Ujfx Adxjw KAMAG has a strong load-bearing capacity. Mileage: 213,221 km Operating hours: 18,983 hours Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, 💡 Unique Opportunity – Official Dealer Showroom Machine This machine comes from the demonstrative showroom of a former official Markforged and DWS dealer active on the Italian market until 2025. It has been used exclusively for demonstration purposes, maintained in excellent condition, and with very low operating hours. Now available through 3D Machineries Srl, this is a rare opportunity to acquire an industrial 3D printer that is practically new, at a fraction of its original cost – with immediate availability and maximum transparency regarding its origin and usage. -----LISTING DESCRIPTION----- Markforged X7 – 3D Printer for Composite Materials (CFR) – Used for Demos For sale: Markforged X7, top-of-the-line industrial 3D printer featuring Continuous Fiber Reinforcement (CFR) technology, specifically designed for manufacturing high-performance functional parts. The machine was installed on 01/02/2024 and has only 2,262 operating hours, exclusively in showroom use for demo purposes. It comes from an official Markforged dealer currently in liquidation. Bedpfswzmd Eex Adxoww ✅ Condition: Excellent – demo use only ✅ Installation date: 01/02/2024 ✅ Print hours: 2,262 ✅ Serial number: 21450012211002129 ✅ Origin: Official dealer showroom ✅ Continuous fiber reinforcement: carbon fiber, fiberglass, Kevlar® ✅ Included software: Eiger (cloud and local) ✅ Dry Box for safe material storage included Technical Specifications: Technology: FFF + CFR (Continuous Fiber Reinforcement) Build volume: 330 x 270 x 200 mm Enclosed chamber for improved thermal stability Layer height: from 50 µm Accuracy: ±150 μm (X,Y) High-resolution optical encoders Connectivity: Ethernet, WiFi, USB Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon Fiber, Fiberglass, Kevlar®, HSHT Certifications: CE, FCC, UL, UKCA Ready for Blacksmith (automatic dimensional calibration) ✅ Perfect for aerospace, automotive, industrial manufacturing, advanced prototyping, defense 💡 Unique chance to acquire a professional CFR 3D printer at a competitive price! 📩 Contact us to receive the technical data sheet, video, full documentation, or to schedule a viewing of the machine.

Condition: used, Year of construction: 2023, In the market for a Top of the Range Miyano? Then have a look at this one! 18 months old and just over 1000 hours on the clock…it is as new! Still on site where it can be seen under power. The following is from Miyano’s Spec sheet: The Miyano ABX-64SYY – is a Top of the range, twin spindle, twin turrets with Y-axis on each turret. The ability to machine simultaneously at the left and right spindles using the upper and lower turrets, both featuring a Y-axis function, means that complete front and back machining of products with complex shapes can be accomplished simply and in a short time. High rigidity and high torque with 40 Nm driven tools. The use of rigid 40 Nm driven tool drives capable of heavy cutting ensures stable milling. Two turrets with a total of 24 tool positions, all driven, handle complex machining just like a machining centre. This machine also features the optional parts conveyor, Hainbuch collet chucks on both spindles, high pressure coolant, probing and a steady rest that’s mounted on the lower turret. Machining Capacity and Chuck System Maximum Machining Diameter of Bar Work SP1/SP2 ø64/51mm Collet Chuck SP1/SP2 Stationary Power Chuck SP1/SP2 6″/6″ hydraulic drive Standard Turning Length 125mm Spindle Spindle Nose SP1/SP2 A2-8/A2-6 Spindle motor(30min./Cont.) SP1 15/11kW SP2 7.5/5.5kW Spindle Speed Range SP1 50 – 5,000min-1 40 – 4,000min-1 SP2 50 – 5,000min-1 Turrets(Upper L/R Turrets & Lower Turret) Type of Turret 2 x 12 Station Turret Shank Height of Square Turning Tool □20mm Diameter of Drill Shank ø40mm ø20mm ø25mm Slide Stroke X1, X2 axis 190mm Z1/Z2 axis 550mm/721mm Y1, Y2 axis ±40mm Zs axis 756mm Rapid Traverse Rate X1, X2 axis 16m/min Z1/Z2 axis 30/20m/min Y1, Y2 axis 12m/min Zs axis 30m/min Driven Tools Maximum Number of Revolving Tools 24 Rotation speed of Driven Tools 60 – 6,000min-1 Driven Tool Motor AC Servo 4.5kW Machine Dimensions Machine Height 2,222mm Floor Space 3,290×2,204mm Machine Weight 10,900kg Name of the machine: Miyano ABX-64SYY Bwjdpsw I D Duofx Adxew

Condition: used, mileage: 57,837 km, power: 150 kW (203.94 HP), fuel type: electric, gearing type: automatic, wheelbase: 3,200 mm, overall weight: 3,500 kg, empty load weight: 2,635 kg, maximum load weight: 865 kg, first registration: 08/2021, color: grey, suspension: other, number of seats: 8, total length: 5,140 mm, fuel: electricity, Equipment: air conditioning, airbag, car registration, central locking, cruise control, immobilizer system, navigation system, onboard computer, sliding door, Interior trim, double sliding door(s), disc brakes, touchscreen, electric, auto-dimming exterior mirrors, 360-degree camera, heat-insulating glass, metallic paint, 4-door, CarGarantie warranty, front-wheel drive, one owner, tinted windows (privacy glazing), battery purchased, rearview camera, black, passenger airbag, front window/head airbags, 8 airbags, right sliding door, left sliding door, color monitor for navigation system, front parking sensors, rear parking sensors, parking assist, parking assist camera, electric windows (2x), seat heating, radio/MP3, outside temperature display, colored glazing, heated exterior mirrors, auto-dimming interior mirror, power steering, electric exterior mirrors, brake assist, speed limiter, comfort seats, 3rd brake light, center armrest, German market version, new roadworthiness/emissions inspection, additional features available, subject to errors and prior sale. New inspection included. Trade-in possible. Leasing and financing available; please contact us for a customized offer. 60-month 'Junge Sterne' (Young Stars) warranty; offer valid until 30.11.2025 subject to early budget exhaustion. 'The vehicle comes with a battery certificate.' BA3 Active Brake Assist, BB7 CO2-optimized brake system, BHHOLD function, C70 pedestrian protection, CF9 Base chassis Plus, CL1 steering wheel adjustable in tilt and height, CL3 leather steering wheel, CL4 multifunction steering wheel with trip computer, D14 anodized roof rails, E07 hill-start assist, E1 digital radio (DAB), E1E digital extra: hard drive navigation, E1 display diagonal 26 cm (10.25''), E1T touchpad, E3K charging cable Mode 3 (Type 2, 3x20A) 5m, E4S digital extra: smartphone integration, E6M MBUX multimedia system Mid, E7L AC charging 11 kW / DC charging 110 kW, E7T high-voltage battery (90 kWh), ED4 fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in trunk/loading area, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, EZ6 park package with 360° camera, EZ8 PARKTRONIC, F65 exterior mirrors, automatically folding. Bwedpfxoxp R U Uo Adxjw

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, functionality: fully functional, warranty duration: 12 months, Cold Jet Aero 75 DX Machine – Like New Condition This machine is designed for industrial cleaning, including the toughest large-scale applications. A key advantage of this model is that it does not feature complex new-generation electronics, making it highly reliable and easier to service. It is regarded as one of the most powerful dry ice blasting units available on the market. The machine is exceptionally well-maintained and in pristine condition. Specification: COLD JET AERO 75 DX DRY ICE BLASTING MACHINE (ONLY 12 OPERATING HOURS) Package Includes: - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) Bwodpjwg R Edofx Adxjw Price: €21,800 This is one of the top-performing dry ice blasting machines worldwide. With no complex electronics, it is dependable and cost-effective to maintain. Estimated New Price: €42,000 For inquiries or to arrange an inspection, please contact DrDryice. All machines are sold with a 1-year warranty. We provide repairs and maintenance for Cold Jet machines. We also offer new Cold Jet systems. Please contact us for further information. Worldwide Shipping Available. Keywords: Cold Jet dry ice machine for sale Dry ice machine for sale Dry ice blasting machine for sale Dry ice blaster for sale Buy dry ice blasting machine Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale (various Cold Jet models) Maintenance and repair of Cold Jet dry ice machines

Condition: new, Year of construction: 2025, functionality: fully functional, Professional Embroidery Machine Mirror Model Model: Mirror Heads: 1 Needles: 15 Applications: caps / finished garments / flat embroidery Embroidery area: 350 x 500 mm Cap embroidery area: 270° Maximum speed: 1000 RPM Bwodpfxexbr Dhs Adxjw Motor: Servomotor High Quality and Optimal Performance with the Mirror Embroidery Machine The Mirror by IBAIMA represents excellence in professional embroidery technology, combining innovative design with top-level performance. Its robust construction and quiet operation ensure absolute precision even with the most complex embroideries. Ideal for various fabrics and materials, it is engineered for durability and consistent output. The Smart Upgrade for Growing Businesses If you are looking for a solution to boost your productivity, the Mirror is the perfect machine. Featuring two operating heads and 15 needles per head, it enables multicolour embroidery in reduced time, optimizing every stage of the workflow. It is the ideal choice for those who want to handle larger orders without compromising on quality. Ease of Use and Advanced Technology with the Mirror Equipped with a state-of-the-art computer system and an intuitive interface, the Mirror simplifies the management of every embroidery project. The machine supports fast and easy programming, minimizing downtime and increasing efficiency, even for users with less experience in the field. Reliability Trusted by Leading Companies The Mirror is chosen by professionals and enterprises seeking a reliable partner to develop their embroidery business at its best. The combination of technology, power, and versatility makes it a winning investment for those who want to stand out in the market.

Condition: excellent (used), CATALOG NO. 6623 TECHNICAL DATA - Diameter of processed logs: 75–200 mm - Minimum input material length: 1100 mm - Stepless feed speed adjustment + forward/reverse - Cutterhead drive motor: 15 kW - Feed motor: 1.7 kW Sequence: - 2 geared feed rollers - 4-knife cutterhead - 2 smooth outfeed rollers - Electrically adjustable cutterhead - Electrically adjustable rollers - Dimensions (LxWxH): 3570 x 1300 x 1700 mm - Weight: approx. 4000 kg ADVANTAGES – Manufactured in Germany - Suitable for taper turning of posts – Used rounder, in very good condition Net price: 129,900 PLN Net price: 30,920 EUR (based on 4.2 EUR/PLN rate) Bsdpfxelrvhnj Adxjww (Prices may change according to currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes to identify the goods. We only resell items that were previously placed on the market by the manufacturer. We have no business affiliation with the manufacturer.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 22203052404000057, Year of construction: 2024, operating hours: 356 h, 💡 Unique Opportunity – Official Dealer Showroom Machine This machine comes from the demonstration showroom of a former official Markforged and DWS dealer active in the Italian market until 2025. It has only been used for demonstration purposes, maintained in excellent condition, and has very low operating hours. Now available from 3D Machineries Srl, it represents a rare chance to purchase a virtually new industrial 3D printer at a fraction of the original cost – available immediately with full transparency regarding its origin and usage. -----LISTING DESCRIPTION----- Markforged FX10 Industrial 3D Printer – Showroom Demo Use Only For sale: Markforged FX10, a professional composite material 3D printer, exclusively used in the showroom by an official dealer. The machine was installed on 01/05/2024 and has only 356 print hours. ✅ Condition: Excellent – demo use only ✅ Installation date: 01/05/2024 ✅ Total print hours: 356 ✅ Origin: Official Markforged dealer showroom Technical specifications: Model: Markforged FX10 Certifications: CE, FCC, UL (ETL Intertek), UKCA, R-NZ Power supply voltage: 100–240V, 50–60Hz Maximum current draw: 12.6 A Rated power: 1000 W Device ID: e5a4e1e1–1025–4d8f–9edd–2b8aeb6aad2f Serial number: FX10 – 22203 Designed in the USA (Massachusetts) – Assembled in Israel Additional certifications: UL 2011, CSA Std. C22.2#301 Connectivity: WiFi, Ethernet, USB Touchscreen control with advanced monitoring of nozzles, print bed, chamber, and materials Filament bays: 4 auto-switching slots (A1, A2, B1, B2) Vacuum system for print bed fixation Dual print head for fiber-reinforced material printing (A/F configuration) This printer is top of the range for aerospace, automotive, advanced tooling, and defense applications, offering precision, reliability, and ease of use. A unique opportunity to purchase a state-of-the-art machine on exceptional terms. 📩 Contact us for further technical details, machine viewing, or private negotiation. Bodewzmcnjpfx Adxoww Original packaging Standard accessories Technical documentation Demo residual materials available upon request ✅ Condition Demonstration unit, never used in production Like new condition Available immediately for viewing or shipping

Condition: used, mileage: 61,388 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x4, wheelbase: 3,665 mm, overall weight: 3,500 kg, empty load weight: 2,518 kg, maximum load weight: 982 kg, first registration: 08/2019, loading space length: 2,708 mm, loading space width: 2,030 mm, loading space height: 400 mm, fuel consumption (urban): 10.3 l/100km, fuel consumption (extra-urban): 7.6 l/100km, fuel consumption (combined): 8.6 l/100km, CO₂ emissions: 226 g/km, emission class: euro6, color: green, driver cabin: other, suspension: other, number of seats: 6, total length: 6,156 mm, fuel: diesel, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), onboard computer, soot filter, traction control, Interior trim, timber loading floor, aluminum loading flaps, double cab, disc brakes, right-side mirror electrically adjustable, lumbar support, clock & tachometer, brake pad wear indicator, 4-door, single owner, green emissions sticker (4), spare wheel, steel rims, black, 6-speed transmission, passenger airbag, electric windows (2x), radio, radio/MP3, outside temperature display, tinted windows, heated exterior mirrors, power steering, wood trim, electrically adjustable mirrors, comfort seats, third brake light, center armrest, German market version, additional features available, errors and prior sale excepted. Trade-in possible. Financing possible—please contact us for a custom offer. AR3 axle ratio i = 4.182, C6L multifunction steering wheel, CL1 steering wheel adjustable in tilt and height, E07 hill start assist, E1A MBConnect - 5, E1D digital radio (DAB), E3M MBUX multimedia system with 7-inch touchscreen, E46 power outlet in cab, E57 trailer socket wiring, ED1 AGM battery 12 V 70 Ah, EE1 230 V outlet, EK1 terminal strip for electrical connection, ES0 jump start contact, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, F64 exterior mirrors foldable electrically, F68 exterior mirrors heated and electrically adjustable, FF0 coat hook in passenger compartment, FF5 overhead shelf above windshield, FJ4 storage compartment under the dashboard, FM3 WET WIPER SYSTEM, FU5 exterior mirrors without indicator, GD6 6-speed manual transmission (ECO Gear), H2 all-round heat-insulating glass, HH9 semi-automatic TEMPMATIC air conditioning, IF4 chassis with double cab, J55 seat belt warning for passenger seat, J58 seat belt warning for driver’s seat, J65 outside temperature display, JA8 Crosswind Assist, JF1 rain sensor, JG0 gear shift indicator, JH3 communication module (LTE) for digital services, K53 lockable AdBlue filler cap, K56 red diesel filler cap, KB7 main tank 93 liters, KLEB fully wrapped vehicle, L44 front side indicator lights, LA2 light assistant, LB1 side marker lights, LE1 adaptive brake light, M4 generator 14 V / 180 A, MI2 engine. Bedpjxp N Tcsfx Adxjww

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: FPR3016042306000126, Year of construction: 2023, operating hours: 1,530 h, 💡 Unique Opportunity – Showroom Machine from Official Dealer This machine comes from the demonstration showroom of a former official Markforged and DWS dealer, active in the Italian market until 2025. It has been used exclusively for demonstration purposes, maintained in excellent condition with very few operating hours. Now available from 3D Machineries Srl, it represents a rare chance to purchase a virtually new industrial 3D printer at a fraction of the original cost – with immediate availability and full transparency regarding its origin and usage. -----LISTING DESCRIPTION----- 🖨️ Markforged FX20 – Industrial 3D Printer for Composite Materials 🔧 Model: FX20 🔢 Serial Number: FPR3016042306000126 📅 Year of Manufacture: 2023 🏷️ Condition: Demonstration – from showroom 📦 Packaging: Original, machine packed and ready for shipment 📍 Location: Turin, Italy 🧩 Description The Markforged FX20 is the most advanced 3D printer for high-performance composite materials, designed for the most demanding industrial applications. It prints with materials such as Onyx™, ULTEM™ 9085, and continuous carbon fiber, glass fiber, and Kevlar. With a large build volume and a heated chamber up to 200°C, it enables the production of strong, lightweight functional components, ideal for aerospace, automotive, defense, and advanced manufacturing sectors. 📐 Key Features Build volume: 525 x 400 x 400 mm Technology: FFF + CFF (Continuous Fiber Fabrication) Heated chamber: Up to 200°C Compatible materials: Onyx™, Carbon Fiber, Fiberglass, Kevlar, ULTEM™ 9085 Software: Eiger™ (cloud or on-premise) Connectivity: Ethernet, Wi-Fi Power supply: Multivoltage 200–415V, 50/60Hz, three-phase 🧾 Certifications and Compliance CE, FCC, UKCA, ETL, CSA Compliance: UL 2011, NFPA 79, CSA C22.2#301 Manufactured in the United States 📦 Included in the Sale Markforged FX20 3D printer Original packaging Standard accessories Bjdpjwy Uiajfx Adxoww Technical documentation Residual demo materials upon request ✅ Condition Demonstration machine, never used in production As-new condition Immediately available for inspection or shipping