Used Magnetic Stirrer for sale (2,018)

Condition: used, Type SD 15 / 35 . Technical data : Length: 350 mm width: 150 mm Polarity ~ 9 mm . Nwodjyk Emcepfx Adbjc Space requirement approx.: L:440 x W:210 x H:135 mm . Voltage: 24V Current: 2,04A

Condition: used, This listing is for a Bibby Scientific HT2 Halogen Hotplate Stirrer The unit is in full working condition and is ready for immediate release Bibby Scientific HT2 Halogen Hot Plate Stirrer Bibby HT2 Bibby Sterlin HT2 HT2 120 Volt a high heat glass top halogen hot plate stirrer Nwsdpsxv Acwefx Adbsc Maximum temperature 450C Stirrer speed range 0 to 1100 rpm Heater Twin infra red halogen lamps Heater area (dia) 140 mm Dimensions lxwxh 300 x 300 x 100 mm

Condition: used, This listing is for the Stuart CB162 Hotplate Stirrer The unit is in full working condition and is ready for immediate use Overview: Stuart CB162 Hotplate Stirrer The Stuart CB162 is an analogue hotplate stirrer combining heating and magnetic stirring capabilities. It has traditionally been used in lab settings for tasks requiring both uniform heating and effective mixing. Key specifications include: Plate material: Glass ceramic — highly resistant to chemicals and heat, easy to clean, with cooler edges to reduce burn risk. Heating power: Approximately 500 W, capable of reaching a maximum plate temperature of about 450 °C. Stirring speed: Variable from ~100 to 1,500 rpm, using strong magnetic coupling. Capacity: Effective for stirring up to around 15 litres. Safety features: A flashing "Hot" warning light that stays on if the plate temperature exceeds 50 °C — even when turned off or unplugged. Spill‑proof design and an independent safety circuit to prevent overheating. Product Status & Successors The CB162 model is now obsolete. It has been officially replaced by the Undergrad UC152, a newer analogue hotplate stirrer with similar features. The SB162, a similar model but with an aluminium‑silicon alloy plate, was replaced by US152 Nwjdpjxhfn Hofx Adbsc

Condition: used, This listing is for the Stuart CR302 Infrared Hotplate stirrer The unit is in full working condition and is ready for immediate use Nwedpjxhfq Usfx Adbjc Overview & Key Features Infrared (IR) Heating: Utilizes a 900 W infrared heater—this allows it to boil 1 litre of water over 30% faster than standard 1200 W ceramic hotplates. Powerful Magnetic Stirring: Equipped with rare-earth magnets, it can stir up to 15 litres of liquid. Stirring speed is adjustable, ranging from 100 to 1500 rpm, with feedback control to maintain steady rates. Temperature Capability: The hotplate can reach a maximum temperature of 400 °C. Size & Portability: Hotplate surface: 30 × 30 cm Overall dimensions: approximately 32 × 37 × 11 cm (W × D × H) Weight: about 4 kg Power Supply: Designed for use with 240 V, compatible with standard UK lab mains at 50/60 

Condition: used, This listing is for a IKA Euro-star 100 D S002 Overhead Stirrer The unit is in full working condition and is ready for immediate release The IKA Eurostar 100 D S002 is a powerful laboratory overhead stirrer designed for a wide range of applications, ideal for mixing volumes up to 100 liters of water (H₂O). Engineered for precision and durability, it’s perfect for laboratories needing reliable and consistent mixing performance. Specifications Speed Range: 0/30 to 1300 rpm Maximum Stirring Capacity: 100 liters (H₂O) Maximum Viscosity: 70,000 mPas Maximum Torque: 100 Ncm Motor Rating Input/Output: 186 W / 136 W Motor Type: Maintenance-free brushless DC motor Chuck Range: 0.5 to 10 mm Protection Class: IP 42 Interfaces: RS 232 and USB for control and data documentation Dimensions (W x D x H): 86 x 208 x 248 mm Nwsdpfjxv Dg Rox Adboc Weight: Approx. 3.9 kg Power Supply: 230 V, 50/60 Hz Key Features Digital TFT Display: High-visibility screen for real-time parameter monitoring Removable Wireless Controller: Enhances ease of use and flexibility Microprocessor-Controlled Speed Regulation: Automatically adjusts speed to maintain precision within the set range, even with changes in sample viscosity Integrated Torque Trend Display: Enables real-time monitoring of viscosity changes Safety Systems: Built-in overload and anti-stall protection with automatic shut-off Quiet Operation: Low-noise performance for lab comfort Push-Through Agitator Shaft: Allows quick removal and easy cleaning Error Code Display: Notifies users of system alerts or issues Constant Speed Maintenance: Ensures uniform mixing, compensating for viscosity fluctuation

Condition: used, This listing is for a IKA Eurostar PWR CV Overhead Stirrer. Nodpfx Adjxxz S Aebowc The unit is in full working condition and is ready for immediate release. The IKA Eurostar PWR CV Overhead Stirrer is an efficient laboratory device specifically designed for various stirring tasks, excelling in mixing both high and low viscosity substances. This stirrer is part of the comprehensive IKA Eurostar series, which offers diverse models tailored to different laboratory needs. Key Features: Speed Range: Features a versatile speed range of rpm, with automatic adjustments made possible through advanced microprocessor-controlled technology. Safety Circuits: Equipped with built-in safety circuits that provide automatic cut-off in cases of anti-stall or overload conditions, ensuring user safety and equipment protection. Constant Speed: Maintains a steady speed regardless of viscosity changes in the sample, as it continuously compares the actual shaft speed with the set speed for optimal performance. Stirring Quantity: The EuroStar 20 model can handle a maximum stirring quantity of 15 litres (H2O), making it suitable for larger volumes. Torque: Delivers a maximum torque of 20 Ncm at the stirring shaft, providing sufficient power for effective mixing. Stirring Element Fastening: The stirring element is securely fastened using a chuck, ensuring stability during operation. Applications: Laboratory Use: Designed specifically for laboratory environments, making it ideal for routine stirring tasks. Mixing Substances: Capable of efficiently mixing a wide range of substances, whether they are of high or low viscosity, catering to diverse experimental needs. Intensive Mixing: Suitable for applications that demand intensive mixing, such as preparing emulsions or suspensions.

Condition: used, This listing is for the Stuart Scientific SM1 Magnetic Stirer The unit is not at it's best aesthetically and that is reflected in our pricing, it is however in full working condition and is ready for immediate release. The Stuart Scientific SM1 Magnetic Stirrer is a laboratory bench-top device designed to mix liquids uniformly using a rotating magnetic field. It’s a basic analogue magnetic stirrer often found in educational, research, and routine laboratory settings for mixing solutions, suspensions, or samples without heating The SM1 is suitable for everyday laboratory mixing tasks such as: Mixing aqueous solutions, buffers, and reagents. Suspension of particulates or cells. Routine solution preparation and titration support. Nwjdpfx Aox Npnvjdboc Because it lacks a heating element, it’s ideal where temperature control isn’t needed, or when stirring only is required (e.g., during dissolving solids into liquids).

Condition: ready for operation (used), An IFE magnetic separator with a Wagner magnet is available. Magnet type: FE0446-30/55, magnet weight: approx. 78kg. On-site inspection is possible. Nsdev Dwi Eepfx Adbjwc

Condition: good (used), electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate, magnetic prism, magnetic prism Nodpfx Aex Sv Sasdbowc -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 120 mm -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Dimensions: 120/75/H105 mm -Weight: 4.5 kg

Condition: good (used), I SELL FEIN PS 50 MAGNETIC DRILL. IN VERY GOOD CONDITION. Nwodoulc Tuopfx Adbjc

Condition: used, This listing is for a Metrohm 719S Titrino with 20ml burette and 728 Stirrer Njdpfxsxzg Iuj Adbjwc

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. Nodschuvrjpfx Adbewc For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Year of construction: 2015, condition: ready for operation (used), Stirrer in stainless steel. Brand - Rollmatic Type - Bull 60-P INOX. Year - 2015. Total weight - 262kg. Voltage - 400V-3-50/60hz. 3kW. Ampere - 7.2A. Both for 60 and 40 liter kettle. Nwsdev Upbhjpfx Adboc 1 pc. HOVMAND kettle lifter included. Video of the stirrer is available where it is connected to power. CLH.24

Condition: refurbished (used), Year of construction: 2004, total width: 15,000 mm, total length: 26,500 mm, Overband magnetic separator new bearings included new motor included Attention old pictures because the magnet is in storage inspection possible Nwjdpfx Aora Dvkodbjc Available immediately

Condition: used, Solenoid valve, disc valve, flap valve, electromagnetic valve, magnetic valve, solenoid gas valve, gas solenoid valve Nwjdpfetu Rk Tex Adboc -Manufacturer: Bürkert, solenoid valve unused -Type: 0211 A 00,0 NBA MS -ID No.: 00067378 -Voltage. 60 V -Number: 19x valve available -Price per piece -Dimensions: 50/32/H51 mm -Weight: 0.2 kg/piece

Condition: good (used), Solenoid valve for glue melters Nwsdpfx Ajdntfrjdbjc -Magnet valve: 5/2 way valve -Pressure: max. 6 bar -Connection: 24 V DC -Watt: 8 W. -Protection class: IP 65 -Dimensions: 95/30/H65 mm -Weight: 50 g

Condition: used, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor -max. speed: 1500 rpm -Shaft: Ø mm -Quantity: 1 piece available -Dimensions: 670/206/H245mm -Weight: 51 kg/piece Nsdsdpvwtspfx Adbswc

Condition: used, Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L Njdpfx Adofc R D Ajbowc -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg

Condition: used, 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Manufacturer: Festo, solenoid valve -Type: CPE14-M1BH-5J-1/8 -PN: 2 - 8 bar -Dimension: 135/15/H40 mm Nedpfx Aoii Sfiedbewc -Weight: 0.1 kg

Condition: used, Safety switch, Safety Switch, Magnetic door contact safety switch, Surface magnet, Electromagnetic locking system, Electric door opener -Manufacturer: BSW, surface magnet door contact safety switch Ovp -Type: EF150UPCTC -Operating voltage: 12/24 V -Number: 2x electric door openers available -Price per piece -Dimensions box: 280/95/H40 mm Nedpfxsr Im R Ue Adbewc -Weight: 1,3 kg/piece

Year of construction: 2006, condition: used, Butterfly valve, flap valve, solenoid valve, solenoid valve -Manufacturer: Asco, two-way solenoid valve -Type: SCG262C022 -Connection: 1/4 " Nedpfx Adsgg Tggsbowc -Number: 1x valve available -Dimensions: 70/40/H60 mm -Weight: 0.4 kg

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck, magnetic round chuck -Magnetic clamping plate: permanent magnetic lathe chuck with chuck flange Nodpfx Adswn D Twebowc -Recording: MK4 -Clamping surface: Ø 160 mm -Dimensions: Ø 160 x 205 mm -Weight: 9.8 kg

Condition: good (used), Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor Nodpfx Adsm Dyhisbewc -Manufacturer: Rexroth, 3-phase permanent magnet motor -Type: MKD041B-144-KPO-KN -Speed: 7500 rpm -Shaft: Ø 14 x 30 mm -Dimensions: 275/83/H112 mm -Weight: 4.6 kg

Condition: used, solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, solenoid gas valve, gas solenoid valve -Manufacturer: Bürkert, solenoid coil unused -Type: 0256 A 4.0 NBA 00 -ID-No.: 00061150 voltage. 18-33 V Nwsdsubfxwopfx Adbec -Quantity: 15 pieces available -Price: per piece -Packaging dimensions: 190/120/H50 mm -Weight: 0.4 kg/piece

Condition: used, Solenoid valve, disc valve, flap valve, electromagnetic valve, magnetic valve, solenoid gas valve, gas solenoid valve -Manufacturer: Bürkert, solenoid valve unused -Type: 0313 D 2.0 NBA MS -ID No.: 00061096 -Voltage: 18-33 V -Number: 191x valve available Nwsdotuycgepfx Adboc -Price per piece -Dimensions: 68/32/H51 mm -Weight: 0.2 kg/piece