Used Machine Spirit Level Accuracy for sale (68,652)

Condition: excellent (used), Year of construction: 2021, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, Bwodpfsz Ha H Sjx Afmew C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2017, Ref:11156 . 2017 Schmedt Präleg XL Casing-in Pressing Machine For casing-in a variety of thin to thick books into flexible or hard cases. Special features: • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Bjdpfx Afsz Hbuqjmoww Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230 V + compressed air.

Condition: excellent (used), Year of construction: 2012, operating hours: 37,984 h, functionality: fully functional, machine/vehicle number: 30-2626/01WM4513c.132, total length: 6,698 mm, total width: 2,730 mm, total height: 3,008 mm, overall weight: 4,500 kg, input current: 95 A, feed length X-axis: 2,500 mm, feed length Y-axis: 1,300 mm, input frequency: 50 Hz, type of input current: three-phase, input voltage: 415 V, working height: 925 mm, power: 58 kW (78.86 HP), feed rate X-axis: 18 m/min, pressure: 8 bar, rotational speed (max.): 30 rpm, travel distance X-axis: 6,698 mm, year of last overhaul: 2025, operating pressure: 8 bar, final pressure: 8 bar, protection type (IP code): IP00, volume flow: 10 m³/h, type of cooling: air, number of rollers: 3, Equipment: rotational speed infinitely variable, We offer this very good BENTELER 30-2626 Benteler Glass wash, year of construction 2012. Operating voltage: 415 V Phases: 3 Frequency: 50 Hz Connected load: 50 kW Nominal current: 55 A Bwodpfx Asz Rztvjfmjw Maximum current limited: 87 A Control voltage AC: 125 V Control voltage DC: 24 V Year of manufacture: 2012 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2011, XYZ: 760 x 610 x 610mm, Table 900 x 600mm, 21kW, Heidenhain TNC530, 12000 rpm, 30 station ATC, BT40 taper, swarf conveyor, through spindle coolant, Bwedpfoz Rz Nqsx Afmew

Condition: used, Year of construction: 2013, A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine is equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Specification Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Bwodpfxezzwg Us Afmsw Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain. With following options fitted : - Pneumatic tool change ISO 30 - Drilling unit with ER25 collet. - Extended Y axis stroke 400mm - Increased clamping capacity 200mm. Year - 2013 CE Compliant Serial Number - 22170

Condition: ready for operation (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, spindle speed (min.): 30 rpm, Huron MU6 Universal Milling Machine Model: MU6 Table Size: 2000 x 460mm ‘X’ Longitudinal Travel: 1500mm ‘Y’ Cross Travel: 700mm ‘Z’ Vertical Travel: 550mm Bwjdpfx Aoz S Nkrsfmsw Spindle Speeds: 30 – 2066 RPM Spindle Taper: 50 INT Machine with: Digital Readout

Condition: ready for operation (used), grinding length: 2,500 mm, grinding wheel diameter: 750 mm, grinding diameter: 400 mm, distance between centers: 2,500 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 25 rpm, workpiece spindle speed (max.): 360 rpm, Newall Cylindrical Grinder 400 x 2500mm Model: LA 96 Capacity: 400 x 2500mm Wheel Size: 75 x 750mm Work Head Speeds: 25-360 RPM Machine With: Bwsdpfxoz S Nmyo Afmow 2 Steadies Swivel Table Coolant System

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Bedpfx Afsz S T Injmeww Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 508 x 406 x 394mm, Table 660 x 381mm, Spindle taper BT30, Beds Agn I Djpfx Afmsww 11.2kW Spindle Motor giving 15,000rpm, HAAS Control, 20 Station ATC, Coolant.

Condition: used, total length: 6,500 mm, total width: 3,450 mm, total height: 3,930 mm, Year of manufacture: 2002 Colour: Green Empty weight: 94.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Bjdpfs Agn Svox Afmsww - Year: 2002 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 385 - Drive system: CNC - Control system brand: Swebend - Control system type: 2021 Seven X CNC - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Power [kW]: 163.0 - Max. sheet thickness [mm]: 77 - Max. prebending thickness [mm]: 65 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 700 - Bottom roll diameter [mm]: 700 - Options: Cone rolling, Plate support - Transport dimensions: 6500mm x 3450mm x 3930mm (l x w x h) - Transport weight [kg]: 94000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 1,100 kg, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Bwodpfxjzp E Sbj Afmsw Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: new, Year of construction: 2026, table length 3048 mm table width 1524 mm burner heads 1 Bwsdpfx Afo Agpg Uemow Control CNC workpiece weight 911 kg traversing speed 80 m/min dimensions of the machine ca. 5600 x 2260 x 1960 mm 1. BodorPower 6 kW laser source 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed with tenon-and-mortise structure 5. Bodor servo motor and driver 6. Bodor oxygen control valve and nitrogen control valve 7. Bodor Lightning perforation technology 8. 21.5-inch touchscreen monitor 9. Automatic cutting gas pressure adjustment 10. Active anti-collision function 11. Intelligent vibration protection 12. Burn-resistant mineral cast housing 13. Bodor Mango® ergonomic remote control 14. Gas-saving nozzles with stable flow 15. Smart maintenance reminder 16. Wi-Fi internet connection 17. Smart alarm for anomalies 18. Water cooling 19. Wear parts kit 20. Exhaust system 21. Nitrogen proportional valve 22. Oxygen pressure gauge/nitrogen pressure gauge MAX. SHEET THICKNESS, CARBON STEEL (mm) 20 MAX. SHEET THICKNESS, STAINLESS STEEL (mm) 18 MAX. SHEET THICKNESS, ALUMINUM (mm) 14 RATED POWER (KW) 30.6 MAX. START-UP CURRENT (A) 58.1

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used 6-meter pipe bending machine with Siemens control Pipe length: 4 meters Bsdpfx Afe Agu D Eemeww Year of manufacture: 2011 6 tool sets Round 22, radius 44 Round 42, radius 84 Round 28, radius 56 Round 18, radius 36 Round 35, radius 70 Round 54, radius 108

Condition: used, Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D Powerline, workpiece height (max.): 1,580 mm, workpiece diameter (max.): 1,000 mm, total height: 3,394 mm, total length: 5,551 mm, total width: 3,375 mm, table width: 800 mm, table length: 1,000 mm, overall weight: 17,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are pleased to offer this CNC 5-axis universal machining center. It is a Deckel Maho (DMG) DMC 100U Duoblock from 2008 with the Siemens 840D control. Technical specifications: Table dimensions: 1000 x 800mm Number of pallets: 2 Bjdpfx Ao Agvh Tofmoww Max. workpiece dimensions: ø1000x1580 mm Max. workpiece weight: 1000kg X-axis travel: 1000 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm A-axis (rotation of the head): 130 ° (0,001 °) C-axis (work table rotation): 360° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 28/19 kW Number of positions in tool magazine: 60 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you.

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Bwedpfx Aezlt Aysfmew This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 50,0 mm arm length 1.350 mm workpiece height max. 1630 mm turning speeds 19 - 1320 U/min bore spindles - Morse Taper 5 MK engine output 5,5 kW weight 5 t range L-W-H 2,4 x 1,0 x 3,55 mm feed movement 475 mm Bwsdpfx Afowiikdjmsw floor plate size: 1650x1000 mm feeds 0,07-2,9 mm/U

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: SACMI / Pack Sud HPS20 Industrial Flowpack Packaging Machine We are offering a SACMI / Pack Sud HPS20 horizontal flowpack packaging machine, manufactured in 2021. The machine is designed for automatic packaging of products in flexible film, creating sealed packages with one longitudinal and two transverse seals. Technical Specifications Manufacturer: Pack Sud S.r.l. – SACMI Group, Italy Model: HPS20 Year of manufacture: 2021 Serial number: HPS20-21044C Machine type: Horizontal Flowpack Packaging Machine Maximum capacity: Up to 150 cycles/minute Maximum film speed: 20 metres/minute Electrical supply: 400 V / 50 Hz / 3-phase Installed power: 3 kW Required compressed air pressure: 6 bar Bwsdpfxj Afamij Afmsw Machine dimensions: Approx. 4,100 × 1,278 × 1,622 mm Machine weight: Approx. 850 kg The stated capacity and dimensions are based on the manufacturer's standard HPS20 specifications. Actual performance depends on the product, packaging dimensions, and machine configuration. Applications Suitable for horizontal packaging of products using flexible packaging film, including applications within the food and industrial packaging sectors, subject to product compatibility. Documentation Available Original user and maintenance manuals Electrical schematics Control panel documentation CE Declaration of Conformity Additional Information The machine can be offered as an individual unit. Further technical information and documentation are available upon request. For more information, please contact: SACMI HPS20, SACMI HPS 20, SACMI packaging machine, SACMI flowpack, SACMI flow wrapper, Pack Sud HPS20, Pack Sud HPS 20, PackSud HPS20, Pack Sud packaging machine, Pack Sud flowpack, HPS20-21044C, Italian packaging machinery, used SACMI machine, used Pack Sud machine, 2021 packaging machine. English – Packaging Machines: Flowpack machine, flow pack machine, flow packer, flow wrapping machine, horizontal flow wrapper, horizontal flowpack machine, horizontal packaging machine, automatic packaging machine, industrial packaging machine, wrapping machine, automatic wrapping machine, flexible packaging machine, film packaging machine, horizontal form fill seal machine, horizontal form fill and seal, HFFS machine, HFFS packaging machine, pillow pack machine, pillow packaging machine, three-side seal packaging, longitudinal sealing machine, transverse sealing machine, rotary sealing machine, heat sealing packaging machine, plastic film wrapping machine, roll-fed packaging machine, food packaging machinery, product wrapping machine, individual product packaging machine, used packaging equipment, second-hand packaging machine, pre-owned flow wrapper, packaging machinery for sale.

Condition: used, total height: 1,900 mm, total width: 1,800 mm, total length: 2,100 mm, Colour: Green Empty weight: 2.000 kg Bedpfx Afo Ahy Afsmjww - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 6.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 290 - Z-axis travel [mm]: 450 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 1250 - Table width [mm]: 280 - Tool holder: ISO40 - Min. spindle speed [rpm]: 35 - Max. spindle speed [rpm]: 1800 - Options: Chip collection tray, Digital readout, Drill milling machine - └ Type of digital readout: Mitutoyo - Transport dimensions: 2100mm x 1800mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1112519, MACHINE SPECIFICATION Table size 914mm x 356mm Bwsdpfx Afo Ahw Rzsmow X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102 -610mm Spindle BT 40 Spindle speeds 0-12000rpm Spindle motor 22.44kW Rapid feed rate 35.6m/min Toolchanger capacity 24 + 1 tools Approximate weight 3800Kg MACHINE EQUIPPED WITH: - Haas CNC control Wireless intuitive probing system Swarf auger Coolant system Lighting Guarding

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, Bedpfxjxwytce Afmsww spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, 4th axis unit through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: excellent (used), Year of construction: 2007, operating hours: 9,454 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, DMG DMU50 - 2007 Well-maintained 3+2 axis CNC machine. FIRST original owner of this machine. Machine is still fully operational, it has seen very little use over the past years. Bwedpfe Ahxi Dsx Afmew A live demonstration of the machine running is available upon request. Technical Specifications:  Control system: Heidenhain iTNC 530  Axis configuration: 3+2 axis (automatic table, no handwheels)  Travel (X / Y / Z): 500 mm / 450 mm / 400 mm  B-axis: -15° to +110°  C-axis: 360° Included Equipment & Accessories: This is a very complete package. The sale includes:  Tool holders: ±100 tool holders included (please note: milling tools and collets are excluded)  Workpiece touch probe heidenhain.  Spindle speeder: Madaula spindle speeder (compatible with the tool changer)  Workholding: 2 Schunk clamping vices + 1 height block + several extras.

Condition: used, mileage: 865,949 km, power: 235 kW (319.51 HP), first registration: 08/2007, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 7,350 mm, fuel: diesel, color: silver, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 12,020 mm, total width: 2,550 mm, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, differential lock, electric window regulation, seat heater, traction control, = Additional Options and Accessories = - Lift axle - Radio - Sun visor - Spotlights - Toolbox = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 295/60R22.5; Dual tires; Tire tread depth left (inside): 40%; Tire tread depth left (outside): 40%; Tire tread depth right (inside): 40%; Tire tread depth right (outside): 40%; Suspension: Air suspension Rear axle 2: Tire size: 355/50R22.5; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Air suspension Weights Unladen weight: 16,990 kg Payload: 11,010 kg GVWR: 28,000 kg Functional Crane: Hiab Identification Model number: ACTROS 2532 6x2 / HIAB CRANE / M Bwsdpfxs Ahwz Se Afmsw = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT). We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 2 h, load capacity: 1,800 kg, lifting height: 4,800 mm, free lift: 1,515 mm, load center: 600 mm, fuel type: electric, mast type: triplex, battery capacity: 150 Ah, remaining battery capacity: 100 %, battery voltage: 80 V, DGUV certified until: 11/2027, fork length: 1,200 mm, tire condition: 100 %, total height: 2,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, full service history, hydraulic fork positioner, lighting, sideshift, Noblelift CPD18-A Electric Forklift - NEW - with the following specifications: · Lifting capacity: 1,800 kg at a load center of 600 mm · Lifting height: 4,800 mm · Overall height: 2,200 mm Bwjds Ahzqtepfx Afmew · Year of manufacture: 2026 (new) · Operating hours: 2 Noblelift electric forklift, lithium-ion battery, non-marking tires, triplex mast with side shifter and fork positioner, load guard, lighting, single-pedal operation, four-link mechanical system, fork length 1,200 mm, integrated charger Price ex works, including valid FEM (UVV) inspection upon sale Inspection, demonstration, and test drive are available by appointment. Warranty: 84 months or 10,000 operating hours manufacturer's warranty on the lithium-ion battery 12 months or 1,000 operating hours manufacturer's warranty on the machine (whichever comes first) Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-type low-bed trailer (transport costs upon request). Further information and offers can be found on our redesigned website!

Condition: excellent (used), Year of construction: 2022, Wobarg 1700 Automatic Stacker / Strapping Machine 2022 – Industrial Packaging & Strapping Machine Manufacturer: Wobarg Maskinkonstruktion ApS, Denmark Type: Automatic Stacker / Strapping Machine Year: 2022 Machine number: 1700 Control system: Siemens SIMATIC HMI Compressed air: 6 bar Frequency: 50 Hz The machine features an integrated conveyor system, adjustable product guides, pneumatic handling components, motor-driven mechanisms, and a Siemens SIMATIC touchscreen control panel. The system is enclosed by transparent safety guarding with access doors and emergency-stop controls. Automatic stacking and strapping configuration Siemens SIMATIC HMI operator panel Integrated motor-driven conveyor belt Adjustable product positioning and guiding Pneumatic handling system Industrial electric motor and gearbox Strapping material reel holder Safety enclosure with transparent panel The machine is available for inspection. Operating condition, production capacity, and suitability for specific products should be verified before purchase. Bjdpfxj Afangj Afmsww Manufacturer & Machine Identification: Wobarg, Wobarg Maskinkonstruktion, Wobarg Maskinkonstruktion ApS, Wobarg Stacker, Wobarg Strapping Machine, Wobarg Stacker Strapping Machine, Wobarg 1700, Wobarg 2022, Cyklop, Cyklop packaging, automatic stacker, automatic strapping machine, industrial stacker, automatic stacking machine, stacking and strapping machine, automated packaging equipment, Siemens SIMATIC HMI. English – Packaging & Strapping Machinery: Automatic strapping machine, industrial strapping machine, automatic strapper, automatic stacking machine, stacker strapper, stacking and strapping system, automatic bundling machine, industrial bundling machine, bundle strapping machine, product stacking machine, automatic product stacker, packaging line equipment, automated packaging line, end-of-line packaging, end-of-line automation, packaging automation, industrial packaging machinery, automatic packaging system, conveyor strapping machine, inline strapping machine, automatic banding machine, PP strapping machine, plastic strap machine, automatic product handling, industrial conveyor system, production line automation, secondary packaging equipment, bundle packaging machine, product grouping machine, packaging conveyor, stacking conveyor, industrial handling equipment. English – Food Industry & Processing: Food industry equipment, food processing equipment, food packaging machinery, industrial food packaging, food production line, food packaging automation, food handling equipment, automated food packaging line, food factory equipment, food processing plant machinery, secondary food packaging, food product stacking, food product bundling, food industry conveyor, food production automation, frozen food packaging equipment, chilled product handling, industrial food handling, food packaging line equipment, food factory automation, packaging machinery for food manufacturers. English – Dry Ice Industry: Dry ice production equipment, dry ice packaging equipment, dry ice packaging line, dry ice block handling, dry ice block stacking, dry ice block strapping, dry ice production line, dry ice processing equipment, dry ice factory machinery, CO2 dry ice production, dry ice block production, dry ice industrial equipment, dry ice handling equipment, dry ice production automation, dry ice packaging automation, dry ice block bundling.

Condition: as good as new (ex-display), Year of construction: 2024, bore capacity in steel (diameter) 32.0 mm throat 230 mm bore stroke 120 mm morse taper 3 MK table: 400 x 320 mm turning speeds 105 - 1725 U/min total power requirement 1.2 kW weight 245 kg range L-W-H 470 x 810 x 1710 mm Furnishing: Bwjdpjw U U N Iefx Afmew - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover