Used Liebherr L 522 for sale (262)

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 280 mm max. module: 5 min. module: 1 min. number of teeth: 7 Itsdpfswh Dlmex Achek toolpiece turning speed range: 4.000...10.000 U/min tool length: 210 mm CBN *

Condition: used, Year of construction: 2020, operating hours: 5,000 h, * Liebherr R920 Compact LC tracked excavator Itodpfx Acezbwn Hohsk * Year of manufacture: 2020 * 4,990 operating hours * 22,400 kg * 110 kW * OQ65 fully hydraulic quick coupler * Variable-geometry boom * Blade * Central lubrication system * Refueling pump * Air conditioning * 3 m undercarriage width * 75 cm track pads * 180° camera * Undercarriage in very good condition * Maintained according to service schedule

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1443, table diameter: 180 mm, gear diameter: 200 mm, milling spindle length: 230 mm, spindle speed (max.): 750 rpm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Max. table speed: 100 rpm Center distance: 15 - 400 mm Machine column Max. axial travel: 600 mm Milling head swivel device Milling head swivel angle: ± 45 degrees Milling head Drive power: 27 kW Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter column Max. counter support travel: 540 mm Itedew T Ry Tepfx Achek Max. counter support rapid traverse: 15,000 mm/min Max. counter support arm force: 13 kN MACHINE DETAILS Approximate total weight: 15,000 kg Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump flow rate: 24 l/min Hydraulic volume in hydraulic reservoir approx.: 7 l Max. average noise level: 82 dB(A)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1130, table diameter: 250 mm, wheel diameter: 280 mm, spindle speed (max.): 1,500 rpm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Table speed range: 100 rpm Table diameter: 250 mm Centre distance: 15 - 285 mm Max. axial travel: 350 mm Milling Head Isdpfow T R Ahjx Achstk Drive power: 16 kW Min. number of teeth: 4 Cutter speeds: 1,500 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Tangential travel: 200 mm Tangential speed: 3,000 mm/min Swivel angle: ± 45° MACHINE DETAILS Approx. machine weight: 13,000 kg Supply voltage: 400 V Mains frequency: 50 Hz Connected load: 35 kVA

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1719, wheel diameter: 280 mm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Itedpfx Acew T R Auohjk MACHINE DETAILS Machine weight: 13 t Operating voltage: 400 V Control voltage: 24 V DC

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 50.00.283, SKS cream cooler cabinet from Liebherr for 60x40 tilting shelves Made entirely of stainless steel Itsdpfx Ajghr N Iochsk Like new.

Condition: good (used), functionality: fully functional, mileage: 13,187 km, power: 140 kW (190.35 HP), gearing type: automatic, fuel type: diesel, Year of construction: 2007, operating hours: 13,187 h, Wheel loader Liebherr L556-454, 2plus2 configuration, year of manufacture 2007. Equipped with Liebherr engine D934L A6 delivering 140 kW, automatic transmission, and self-locking differentials on both axles. The stepless 2plus2 drive system and wet multi-disc brakes on both axles ensure high traction and operational safety. The machine features single-lever control, air conditioning, adjustable steering column, and a driver's suspension seat with LFD damping system for enhanced operator comfort. The cab is fitted with a laminated safety glass windscreen, green/tinted version. Additionally, there are 4 working lights at the front and 2 reversing lights. Attachments and special equipment: - 2600 mm lift mast - Piston rod protection for 2600 mm lift mast - 4 Michelin tyres 23.5 R25 XHA*L3 - Quick coupler - Single rail guide for Z-kinematics / 2600 mm lift mast - Single front hydraulic auxiliary circuit and additional hydraulic swing function - Automatic central lubrication system with electric pump and electronic control - Reversible fan drive - Electronic auxiliary module with keypad - Top-Air pre-cleaner - Control lever lift lock for add-on lever set - Operator seat with pneumatic suspension Grammer 24V - Radio installation kit 24V - Rear view monitoring with camera and monitor - German/Luxembourg version - Operating manual GT list A powerful and comprehensively equipped wheel loader, suitable for demanding tasks in construction, recycling, industrial applications, and material handling. Iedpfx Acey Dt A Tehotk Sale is made without warranty and liability.

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 23,000 kg, Year of construction: 2019, operating hours: 9,563 h, LIEBHERR LH22M. Year: 2019. Hours: 9,563. Hydraulic cab. Four outriggers. Solid tyres. 5-meter industrial boom. 4-meter industrial stick with hydraulic line for attachments. Fitted with stone grapple. CE certified. Excellent condition. Ijdpfsyh N Tfex Achotk

Condition: used, functionality: fully functional, color: yellow, Year of construction: 2017, operating hours: 13,450 h, LIEBHERR LH40M. Year: 201. Hours: 13,450. Four grapples. Solid tires. Hydraulic cabin. 9.10 m industrial boom. 7.50 m industrial stick. CE certificate. Very good condition. Itodpfjxl E Afox Achjk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 15,080 h, Liebherr LH30. Year: 2015. Hours: 15,090. Industrial boom 6.80 m. Industrial stick 5 m with front cylinder. Four outriggers. Solid tires. CE certificate. Good condition. Isdpfxeya Iads Achetk

Year of construction: 2000, operating hours: 1 h, condition: used, Transmission: Automatic Power: 1 kW (1 HP) Empty weight: 645 kg Iodpfsx R Uamsx Achetk Please contact Emal Jaweed for more information

Condition: used, functionality: fully functional, Year of construction: 1988, 1 Unit Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Manufacture: 1988 Output: approx. 55 m³/h (compact concrete at 30 sec. mixing time) Aggregate Storage 4-compartment inline silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 Equipped with moisture probe / moisture measurement system Weighing / Dosing System Aggregates via weighing conveyor: max. 2,500 kg Cement scale: 250 kg Water scale: 250 liters Cement Silos 3 × 60 tons – Manufacturer: Kurz 1 × 60 tons – Manufacturer unknown Control System Gedis Operator Station-Control container Additional Equipment Partial enclosure included Admixture container included Available immediately Location: Ludwigslust / Northern Germany Offer is net, ex works (EXW) from current location Subject to prior sale Itodpfx Aey Hia Tjchok Errors and/or misstatements excepted Sold as seen, without warranty or guarantee - Any reproduction, reuse, publication, or copying of this offer, in whole or in part, is strictly prohibited.

Condition: new, For inquiries regarding the attachment, Mr. Herden is happy to assist you (by phone at ...). Liebherr Likufix SW48 Adapter Plate / NEW / in stock & immediately available Price: €5,690.00 net / €6,771.10 gross Two hole patterns available. Drawings of the hole patterns can be found in the photos. - Likufix SW48 adapter plate is fitted with 4 connections - Also available from stock with connector for leakage oil line! Surcharge: €375.00 net - Excavator class: 15t – 35t - Weight: 258 kg Compatible with many attachments such as hydraulic hammers, sorting grabs, and also suitable for the following Westtech products: Small hole pattern: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large hole pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leakage oil line) - Westtech CS580 (requires leakage oil line) - Westtech CS780 (requires leakage oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 Itodpfjykhuijx Achsk - Westtech T4000 - Westtech W1350 - Westtech W1800 All compatible Westtech products are also in stock and immediately available! Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and ready for immediate delivery. Mr. Herden (Tel. ...) will gladly assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Holp. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Westtech. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telescopic handlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = More information = Intended use: Construction Please contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Liebherr Likufix SW33 Adapter Plate / NEW / In Stock & Immediately Available Price: €4,690.00 net / €5,581.10 gross Two bolt patterns available. Drawings of the bolt patterns can be found in the photos. - Likufix SW33 adapter plate is pre-fitted for 4 lines - Also available from stock with a connector for a leakage oil line! Surcharge: €375.00 net - Excavator class: 8t – 20t - Weight: 160 kg Suitable for many attachments such as hydraulic hammers, sorting grabs, as well as for the following Westtech products: Small bolt pattern: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large bolt pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 Iodpfsykhucex Achetk - Westtech CS610 compact (requires leakage oil line) - Westtech CS580 (requires leakage oil line) - Westtech CS780 (requires leakage oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products are also in stock and immediately available! Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. Mr. Herden (Tel. ...) will be happy to advise you. On request, we will also be pleased to provide you with a financing offer. We are an official sales and service partner for OilQuick, Holp, Gierking GMT, Weber MT, Westtech, DMS, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Subject to errors and prior sale! = Further Information = Intended use: Construction Please contact Marius Herden for more information.

Condition: used, Year of construction: 2020, operating hours: 12,057 h, Liebherr LH 50 M material handler, year of manufacture: 2020, operating hours: 12,057 h, incl. timber grab, front and rear dozer blade, heating, air conditioning, all-wheel steering, steering wheel & joystick steering, central lubrication for upper and lower carriage, engine: Liebherr [170kW/230HP], weight: approx. 40,300 kg, good condition, immediately available for operation. Upon request, we can provide a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. For further information, please visit our homepage. Subject to prior sale and errors. Ijdpfxjyfrpyo Achotk ZSA = Further information = Drive: Wheel Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 25,000 kg, wheel width: 3,000 mm, feed length X-axis: 1,000 mm, LIEBHERR L3002 CNC Internal and External Gear Hobber Itjdpfswdmy Esx Achek Built 1982, Modernized 2006 CNC SIEMENS 840 D. Max Wheel diameter 3,000 mm. Max helical angle 45° Internal and external Head. 44/50 kW.

Condition: used, power: 170 kW (231.14 HP), Year of construction: 2017, operating hours: 7,229 h, Equipment: air conditioning, LIEBHERR R936 NLC, year 2017, 7229 operating hours, weight 33,200 kg, 170 kW, equipped with a hammer attachment, and featuring locking valves. Iodpfx Acei Uy Afohstk

Condition: good (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 12,000 kg, feed length Y-axis: 300 mm, feed length Z-axis: 1,080 mm, table diameter: 1,200 mm, feed rate X-axis: 3 m/min, feed rate Y-axis: 500 m/min, feed rate Z-axis: 3 m/min, input current: 195 A, workpiece diameter (max.): 1,600 mm, milling spindle length: 450 mm, table bore: 400 mm, spindle speed (min.): 250 rpm, overall weight: 51,000 kg, power: 115 kW (156.36 HP), Equipment: documentation/manual, Liebherr high-performance gear hobbing machine LC1502 in good condition Controller Liebherr LH90 V4, Bosch Rexroth drives Itsdjwqm A Tjpfx Achjk Extensive accessories such as BHG, cooling unit for lubrication and coolant, extractor, cutter arbors, various software packages/limit value extensions, and complete documentation. We can also assist with setup and commissioning up to production, depending on effort!

Condition: used, Year of construction: 2007, max. wheel diameter 380 mm gear width 540 mm max. module 7 Control SINUMERIK 840 D Axial travel 600 mm table diameter 317 mm table speeds 100 U/min milling head -swivable + / - 35 Grad milling spindle drive 27,00 kW milling spindle speeds (infinitely variable) 1500 U/min diameter of hob 160 mm cutter length max. 330 mm cutter speeds max. 3000 1/min hob dia. - max. 160 mm swarf cutter lenght - max. 330 mm tangential travel max. 300 mm 10.000 mm/min Ijdpfx Acjyt Rvhohjtk tangential speed max. 3000 mm/min 7.500 mm/min oil volume 100 l coolant capacity 780 l Counterholder movement 540 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,00 x 4,50 x H3,50 m for the following processes: axial hobbing, individual part milling, Worm wheel milling, roofing, deburring; NC tailstock

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, table bore: 80 mm, table diameter: 145 mm, gear diameter: 125 mm, controller manufacturer: Siemens, controller model: SINUMERIK 840 D, TECHNICAL DETAILS Maximum wheel diameter: 125 mm Maximum module: 3 Maximum gear width (spur gears): 24 mm Center distance: -25 to +180 mm Maximum swivel angle: 12° Maximum helix angle: 45° Table Table diameter: 145 mm Table bore: 80 mm Infinitely variable table speed: 0.03 – 50 rpm Shaper spindle Stroke rate (double strokes): 1,500 – 3,000 DS/min Stroke position adjustment: 70 mm Stroke length min./max.: 0 – 30 mm Shaper spindle diameter: 85 mm Cutter holder mount: HSK 80 B Tool and workpiece Tool number of teeth: 1 – 200 Minimum tool module: 0.05 Itedpfxsxf Azxe Achok Workpiece number of teeth: 1 – 1,500 Minimum workpiece module: 0.05 Control Control: SINUMERIK 840 D MACHINE DETAILS Electrical data Drive power: 7.5 kW Total power requirement: 30 kVA Weight and dimensions Machine weight: approx. 8 t Space requirement: approx. 4.3 × 2.8 × 2.9 m EQUIPMENT Swiveling counter-holder with 4 positions Automatic workpiece changing device Linear workpiece conveyor

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, table bore: 80 mm, table diameter: 145 mm, gear diameter: 125 mm, controller manufacturer: Siemens, controller model: SINUMERIK 840 D, TECHNICAL DETAILS Working Area Maximum wheel diameter: 125 mm Maximum module: 3 Maximum gear width (spur gears): 24 mm Centre distance: -25 to +180 mm Maximum swivel angle: 12° Maximum helix angle: 45° Table Iodpfxswyn Ame Achjtk Table diameter: 145 mm Table bore: 80 mm Infinitely variable table speeds: 0.03 – 50 rpm Shaper Spindle Strokes (double strokes): 1,500 – 3,000 DS/min Stroke position adjustment: 70 mm Stroke length min./max.: 0 – 30 mm Shaper spindle diameter: 85 mm Cutter holder interface: HSK 80 B Tool and Workpiece Tool number of teeth: 1 – 200 Minimum tool module: 0.05 Workpiece number of teeth: 1 – 1,500 Minimum workpiece module: 0.05 Control Control system: SINUMERIK 840 D MACHINE DETAILS Electrical Data Drive power: 7.5 kW Total connected load: 30 kVA Weight and Dimensions Machine weight: approx. 8 t Space requirement: approx. 4.3 × 2.8 × 2.9 m EQUIPMENT Swiveling counter holder with 4 positions Automatic workpiece changer Linear workpiece conveyor

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 10 (18) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm Itsdpfeyv Ipfox Achjk tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: used, Year of construction: 2015, operating hours: 15,583 h, Equipment: ABS, LIEBHERR LH 22 M LITRONIC Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? BETRIEBSSTD. 15 583 Std TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Itodpfxjycbb Hj Achek * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, Year of construction: 2008, Equipment: ABS, LIEBHERR PELLE A316 Imported / Accident-FREE Itsdpfeum Ihysx Achok IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2008 ? BETRIEBSSTD. 18 887 Std TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, functionality: fully functional, fuel type: diesel, overall weight: 23,500 kg, Year of construction: 2021, operating hours: 4,650 h, Equipment: UVV, adjustable boom, air conditioning, gripper hydraulics, hammer hydraulics, hydraulics, soot filter, For sale is our Liebherr 922 tracked excavator from 2021. The machine has approximately 4,650 operating hours and has been regularly serviced. • Year of manufacture: 2021 • Operating hours: 4,650 hrs • Tracked excavator with adjustable boom for professional applications • Robust construction for tough jobs Itedpfx Acoyg Sm Iehek The excavator is in very good condition and has been maintained on a regular basis. It is perfectly suited for demolition work, excavations, sewer construction, and road construction. If you are interested or have any questions, please feel free to contact us.