Used Layer Bags Palletizer for sale (11,463)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 130 kg, arm reach: 2,194 mm, repeat accuracy: 0.06 mm, spindle speed (max.): 24,000 rpm, number of axes: 6, The system is completely unused. The system consists of: - 2 Stäubli robots with milling heads - 2 tool magazines with automatic tool changers - Control unit - Chip conveyor - Rotary table for pallet loading - Complete enclosure of the working area - Tool carrier pallets TECHNICAL DETAILS Number of axes: 6 Maximum payload: 130 kg Repeatability: ± 0.06 mm Arm Axis 1, working range: 360° Axis 2, working range: 235° Axis 3, working range: 285° Axis 1, max. speed: 160°/s Axis 2, max. speed: 160°/s Axis 3, max. speed: 160°/s Codpfx Aboxt Nzbjbjhf Reach: 2,194 mm × 370° Wrist Axis 4, working range: 540° Axis 5, working range: 240° Axis 6, working range: 540° Axis 4, max. speed: 260°/s Axis 5, max. speed: 260°/s Axis 6, max. speed: 400°/s Spindle Type: POWERTECH PT400 Maximum speed: 24,000 rpm Tool holder: Taper ISO30 Weight: 24 kg Maximum power: 13 kW Torque: 10.4 Nm MACHINE DETAILS Operating temperature range: 0–45°C Ambient humidity: 20–80% rH Weight: 980 kg Note regarding sale: The system was intended for milling roof racks. However, a change of shareholder for the user occurred during delivery. The new shareholder did not take over the system. Further details on the equipment can be found in the attached documentation.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,812 h, functionality: fully functional, machine/vehicle number: 108877, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 850 mm, table load: 800 kg, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel Range X-axis: 900 mm Y-axis: 780 mm Z-axis: 850 mm Distance from spindle center to pallet surface: 50 – 950 mm Distance from spindle nose to pallet center: 70 – 850 mm Pallet Pallet size: 500 × 500 mm Indexing angle: 1° Max. workpiece dimensions: 800 × 1,000 mm Max. workpiece weight: 800 kg Spindle Spindle speed: 50 – 20,000 rpm Spindle taper: HSK Rapid traverse & feed rate Rapid traverse (X/Y/Z): 60 m/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Tool system (ATC) Tool holder: HSK Max. tool diameter (adjacent tool): 100 mm Max. tool diameter (no adjacent tool): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Csdpfjxyiq Nsx Abbehf MACHINE DETAILS Dimensions & Weight Machine height: 3,280 mm Footprint (W × D): 3,080 × 5,585 mm Weight: 21,000 kg Operating Hours Spindle hours: 13,812 h Operating hours: 15,544 h Power-on hours: 33,469 h EQUIPMENT 2-pallet rotary table (APC) Splash guard Coolant supply system Chip air blow (nozzle system) Internal chip conveyor (floor-based system) Spindle head cooling system Worklight (fluorescent) Signal tower (3-stage) Foundation pads Clamping bolts

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 565 mm, controller model: FANUC 21M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 565 mm Speed: max. 12,000 rpm Chjdoxz Ax Ajpfx Abbsf Number of pallets: 2 Pallet size: 400 mm × 400 mm MACHINE DETAILS Control: FANUC 21M

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Cjdpfx Aox A Hagjbbshf Automatic shut-off Programmable cutting gas / pressure selection FastLine FlyLine AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified viewing window, right-hand door Electric roller roof

Condition: new, Year of construction: 2024, functionality: fully functional, workpiece weight (max.): 25 kg, product height (max.): 150 mm, product length (max.): 930 mm, product width (max.): 500 mm, production capacity: 100 unit/h, For sale is a new semi-automatic bottom-up bagging plant. The system was acquired in 2024, is dismantled, newly packaged, and has never been operated. The original price of the machine was €235,000! TECHNICAL DETAILS (according to manufacturer) Capacity: approx. 100 bags/hour Bag weight: 20, 25 kg Bag sizes: bag width 500 mm, bag length 700–930 mm, bag depth 150 mm Bag type: paper (2–5 layers) with PE inner bag or PE Weighing range: 10–30 kg Weighing accuracy: 2 sigma +50 g/-0 g Weighing accuracy: PTB compliant MACHINE DETAILS Control voltage: 400 V, 50 Hz – 24 DC, 3-phase Electrical power: 15 kW Electrical components: Siemens/Eaton PLC: S7-300 Drive motors, gearbox: SEW Pneumatic components: Festo Csdpjxz Eapofx Abbjhf Material: stainless steel DIN 1.4301 Cable tray: brand Cablofill Protection class: IP54 Zone: ATEX zone, inside zone 20 up to 500 mm radius, zone 21 for 500–1000 mm radius, zone 22 Working pressure: 6 bar Compressed air consumption: V = 89 Ndm³/bag Pneumatic connection: 5–6 bar Air consumption: 400 Nl/min Protection class: IP54 Dust extraction air: 45 m³/min Note: Further data regarding the machine can be found in the attached order confirmation.

Condition: excellent (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, total width: 600 mm, total length: 4,700 mm, load capacity: 400 kg, The FRB-P5 scissor roller conveyor from TecMaschin is the optimal solution for an inexpensive entry into goods transport without a drive. It is ideal for spaces where space is limited or fixed conveyor lines cannot be installed and allows customisation according to your needs. The roller conveyor can be extended up to 4.700 mm. In addition, curves can also be formed, flexibly guiding the goods to be transported to the desired loading position effortlessly and with minimum effort. Thanks to the height-adjustable feet (700 - 1.000 mm), the inclination of the roller conveyor can be adjusted quickly and easily, enabling parcels to be transported even on sloping or stepped surfaces. This also facilitates the unloading and loading of transport vehicles, as differences in height can be easily overcome. In addition, handling is particularly uncomplicated and flexible thanks to the small dimensions (1.920 - 4.700 mm x 750 mm x 700 mm) when pushed together and the swivel castors and brakes. The retractable handle at one end of the roller track further simplifies handling. The castors made of durable ABS are particularly light compared to steel castors, which means that the roller track only weighs 97 kg. The FRB-P5 can be loaded with a maximum of 40 kg/m². Codpfx Aex Dca Sobbohf Application scenarios The roller conveyor FRB-P5 can be used flexibly in many application areas in a wide range of industries, such as parcel and courier services, mail order and the packaging industry. Optimally suited for loading and unloading trucks and swap bodies or as relief routes at peak times and for emergency scenarios. Info: To ensure the best possible transport, goods should rest on at least 3 support rollers and have a smooth floor. Ships on a treble UK pallet. Shipping is not included.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Control Unit Brand FANUC Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 570 mm Z-Axis Movement 570 mm Csdpfxox Dd Tyo Abbohf This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Application Types Milling

Condition: like new (used), Year of construction: 2020, operating hours: 100 h, functionality: fully functional, For Sale; 2 Martini Quad Seal Bag Formers, little used, as new. Smaller; makes bag 60mmx45mm Larger; makes bag 90mmx60mm Sale Price is less than 50% of actual cost Cedpfx Aboxzdhxobjhf

Condition: used, Used PET Bottle Recycling Line. Approximately 2,000 kg/hour (4,400 lbs/hour) input, producing about 1,700–2,000 kg/hour (3,750–4,400 lbs/hour) of clean PET flakes depending on feedstock quality and operating conditions. The line was built in 2011-2012. Originally designed for processing post-consumer PET bottles into clean PET flakes. Includes bale breaking, bottle sorting, size reduction, hot and cold washing, polymer separation, flake sorting, and bagging. Main Equipment Includes: Infeed conveyor Bale breaker Metering screw conveyors Star screen classifier Vibrating chute (2) Sesotec optical bottle sorters (4) Collecting conveyors Cutting mill (Model KSM 800-1530) Friction washers Hot washers with recirculation systems Chjdpfx Abew U A Ixobof Sink-float separation stage Post washer and recirculation system (2) Double-stage air separators Sesotec optical flake sorter (9) Filling stations Electrical control system Steel structures and piping More information is available on request.

Condition: ready for operation (used), A good used Safeline Mettler Toledo Metal detector and Conveyor with automatic reject (Pusher) Three Phase Supply Belt Length 1040mm Chedpfxewihc Sj Abbsf Belt Width 130mm Aperture dimensions - width 200mm - usable height 360mm Contact us on Whats App for videos and additional pictures or send a message telling us about your requirement - this machine was previously used for 1Kg Bags of Granulated Sugar Ready to ship worldwide

Year of construction: 2004, condition: good (used), Traverses X Y Z; 680 x 394 x 625mm, B axis -110/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum workpiece diameter 300mm, maximum workpiece height 250mm, number of pallets 40, spindle taper BT40, 240 Station ATC, Chjdjm H Uyzepfx Abbef spindle speed 12000rpm, Fanuc G-Tech 16I control, through spindle coolant, and swarf conveyor.

Condition: excellent (used), Year of construction: 2019, operating hours: 600 h, functionality: fully functional, type of input current: AC, volume flow: 5,950 m³/h, negative pressure: 30,590 Pa, intake manifold diameter: 315 mm, overall weight: 325 kg, total length: 3,440 mm, total height: 2,950 mm, input voltage: 415 V, nominal power: 7.5 kW (10.20 HP), input frequency: 50 Hz, inlet: 315 mm, MK 4 MTFA from Inventair with autoskaker function Date of Manufacture: 2019 Condition: Fully functional and clean Csdpfxjxzgpxj Abbjhf Usage: Only used on an edgebander to remove waste from MFC. No MDF use so fitler bags are clean. Extras: Two boxes of bags and new bag seals Shipping: Can be delivered on a skid of four pallets Terms: Ex works Video: Video of the machine on request Pricing: This item is priced for a quick sale.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Chjdpfxjx Dd T Te Abbof Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2023, overall weight: 1,550 kg, 2023 DMG Mori Automation PH 150 Automatic 4 Position Pallet Handling System With 6 Erowa Pallets Pallet Dimension 500 x 500mm. Maximum Pallet Weight 250kg. Maximum Weight Per Level 1,500kg. Axis Travel 'X'=2,170mm, 'Z'=75mm, 'C'=360°. Rated Acceleration 'X'=200mm/s², 'Z'=800mm/s², 'C'=20°/s². Trigger 'X'=3,000mm/s², 'Z'=1,600mm/s², 'C'=150°/s². Maximum Speed 'X'=500mm/s², 'Z'=500mm/s², 'C'=50°/s². Voltage 400V. S/No. 7717000254A. With 6 Erowa Pallets, Signal Tower, Guarding Transport Brackets, Lifting Shackles & Manuals, Overall Dimensions L1,849 x W1,710 x H2,324mm. Weight 1,550kg. Chsdpfx Absx Aicdjbof

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,200 mm, Genox GXC1200T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 90kW Drive Motor with outboard rotor bearings (110kW & 132kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,200mm wide x 660mm diameter cutting chamber with a choice of either a 10 knife/5 row or 14 knife/7 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). Chjdpfx Absx Ardwsbsf A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: ready for operation (used), functionality: fully functional, A good used take off conveyor in stainless steel fitted with modular belt suitable for use with bagmaker to take filled bags and elevate up to working height - this conveyor is in stainless steel and it was designed and built to accept a metal detector if required (see metal free zone) - complete unit on lockable swivel castors with brakes - three phase geared drive motor with gearbox - modular belt with flights Ready to ship worldwide Chedpfxewucfrs Abbjf Ask for more videos and pictures via Whats App Floor length - 2200mm Belt width - 300mm Infeed height to top of belt - 180mm Outfeed height - 1050mm

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, Chedpfxswq Iwxe Abbef B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Machine weight 9500 kg Main Drive Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Chodpfjx Dd Udox Abbef Application Types Milling

Condition: excellent (used), Year of construction: 2018, Heller H6000 CNC Twin Pallet Horizontal Machining Centre With Siemens 840D sl Control Pallet Dimension 630 x 630mm. Maximum Pallet Mass 1,000kg. Maximum Workpiece Height 1,200mm. Axis Travel 'X'=1,000mm, 'Y'=1,000mm, 'Z'=1,000mm, 'B'=360° (0.001° Increments). Rapid Traverses 'X'=50,000mm/min, 'Y'=50,000mm/min, 'Z'=75,000mm/min, 'B'=25rpm. Feed Thrusts 'X' And 'Y'-axis With Duty Cycle = 40% 15,000N, 'Z' Axis With Duty Cycle = 40 % 20,000N. Spindle Speed Range 5-6,000rpm. Drive Power At Duty Cycle S6 40% 60kW, Maximum Torque At Duty Cycle S6-40% 2,292Nm. 50 Position ATC. Spindle Taper HSK 100A. Maximum Tool Ø280mm, Maximum Tool Length 600mm, Maximum Tool Mass 25kg. S/No. MA56338 (2018). With Absolute Measuring Scales 'X', 'Y' & 'Z', Baluff Tool Chip Reader, Renishaw Spindle Probe Interface, Knoll Through Spindle Coolant System, Knoll Chip Conveyor, LTA Industrial Cleaning Mist Extraction Unit, Signal Tower, Foot Switches, Handwheel & Manuals. Overall Dimensions L7,650 x W3,500 x H4,300mm. Weight 13,500kg. Chedpjx Aia Ajfx Abbjf

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,600 mm, Genox GXC1600T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. Csdox Arc Hjpfx Abbehf 110kW Drive Motor with outboard rotor bearings (132kW & 160kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,600mm wide x 660mm diameter cutting chamber with a choice of either a 5 row or 7 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: excellent (used), Year of construction: 2014, Wheelabrator TTX2 Dry Blasting Line With Siemens Simatic Touchscreen PLC Codpfsx Ah Dgox Abbehf Semi-Automated Abrasive Blast Cell With Cyclone & Extraction System. Donaldson Torit DCE Extractor. Cyclone. YOM: 2014. S/No. 602498. Included with The Purchase Of The Machine is An Upgrade Package Purchased In 2020 But Not Fitted That Includes: Media Dosage System, Automatic Media Refill, Dust Collector Bag Weight Monitoring, Cyclone Replacement, Additional Maintenance Platform, Additional Blowoff Air Nozzle, Machine ‘Self-Cleaning’ System, Removable Door Ledge, Media Sampling System Upgrades, Improved Door Opening System. With Spare (New) Cyclone and Extractor. BIDDING NOTE: All Top Closing Bids received either through Auction or via Make Offer function will be presented to Rolls Royce for final approval. Buyers will be notified by email and/or by Invoice if their bid is successful. COLLECTION NOTE: Due to Rolls Royce Company Policy, ONLY Approved Removal Contractors are Permitted to Operate on this Site. Please See Collection Details for Contact Information.

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Chedpfx Aex Arcyobbsf

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. Codpjx Arcgofx Abbehf All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: new, Year of construction: 2025, functionality: fully functional, nominal power: 55 kW (74.78 HP), rotor diameter: 520 mm, rotor width: 1,000 mm, Genox GXC1000 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. Cjdpjx Arb Nefx Abbehf 75kW Drive Motor with outboard rotor bearings (90kW, 110kW & 132kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1000mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 50 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2025, operating hours: 5 h, condition: new, functionality: fully functional, rotor diameter: 420 mm, rotor width: 800 mm, Genox GC800T Series - High Performance Granulator suitable for processing various materials including plastics, wood, rubber etc. 37kW Drive Motor with outboard rotor bearings, heavy duty precision machines rotor, and 580rpm operating speed as standard. 800mm wide x 420mm diameter cutting chamber with heavy duty, high inertia Cascade Rotor with 24 x rotor knives. Two rows of counter knives are mounted in the chamber. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. An electric assisted chamber opening with actuator with integrated safety interlocks and a setting jig is for pre-setting of knives off the machine are provided to enable quick, easy knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. This machine is in stock at our warehouse in the UK. Chsdpfex Arb Ajx Abbef