Used Lacquer Sanding Machine for sale (91,637)

Condition: good (used), Year of construction: 2010, functionality: fully functional, with sliding table featuring workpiece handling device 400 V, grinding belt speed: v=4 - 25 m/s Drive of the grinding belt via frequency-controlled three-phase motor with P = 4.0 kW Frequency inverter with brake chopper for deceleration in max. 10 s Max. workpiece weight with area load: 100 kg Motorized table height adjustment on roller guides up to max. 480 mm Drive by gear motor with P = 0.55 kW, adjustment speed v = 0.9 m/min Table size 3000x1000 mm, sanding belt 100x9000 mm Extraction nozzle with D=200 mm on the left machine column Gusdpfx Aaoxgpbuoceh Required extraction capacity approx. 3400 m³/h Standard machine color: RAL 5015 (sky blue), RAL 7044 (silk grey); Control cabinets and terminal boxes: RAL 7032 (pebble grey)

Condition: excellent (used), Year of construction: 2006, Dear customers currently we offer a disc sanding machine of the brand HoPa. Here are some technical datas: Disc diameter: 800mm Table length: 1.150 mm Table width: 470 mm Table tilling up and down: +30/-45° Power: 4,0 kW Speed: 750 rpm Gusdpfexlzkfjx Aacoh Dimensions: L 130 cm x B 90 cm x H 180 cm Weight: 390 kg We are looking forward to your questions and inquiries.

Condition: used, Edge sanding machine Gartner FLK 4 - used - including mitre fence ----- Technical Data ----- Sanding belt width: 200 mm, sanding belt length: 2,350 mm, worktable dimensions: 870 x 400 mm, belt speeds: 4, extraction nozzle Ø: 80 mm, motor: 3 kW Godsxd U Uhjpfx Aacouh

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 7612, total length: 6,400 mm, total width: 1,500 mm, total height: 1,250 mm, vertical edge band sanding machine, 7 face sanding supports, 1 upper bevel sanding support, 1 lower bevel sanding support, 1 water groove support, roller conveyor on infeed side 1500 mm, roller conveyor on outfeed side 2000 mm, direction of travel from right to left Gujdpfx Aasxmu Tpoceh

Condition: new, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis Digital Readout Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder (factory installation – price: €672.00 net, not included in price) Centre distance: 1000 mm Centre height: 200 mm Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 – 2000 rpm Longitudinal feeds: (27) 0.06 – 2.78 mm/rev Cross feeds: (22) 0.01 – 0.72 mm/rev Metric threads: (36) 0.8 – 14 mm Inch threads: (30) 2 – 28 TPI Quill diameter: 45 mm Quill travel: 100 mm Quill taper: MT 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Approx. weight: 810 kg Scope of delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, DIN 55029 compliant • Fixed steady rest – max. through diameter 90 mm • Travelling steady rest – max. through diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Removable chip tray • 320 mm face plate • Four-way tool post • Guard for four-way tool post Gsdpfx Aaogd Iagjcouh • Safety slip clutch • Micrometer longitudinal stop • Thread chasing dial • LED machine lamp • Reducer bush • Change gears • 2 live centres • Foot pedal with brake function, CE compliant • Motor with magnetic brake as per CE regulations / operating tool set Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder, factory installation (price: €672.00 net, not included in basic price)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, grinding width: 250 mm, grinding height: 100 mm, Double-sided Brush Sanding Machine / Strip Sanding Machine Make: Quickwood Model: QL 3 Year of manufacture: 2004 Structuring and sanding machine, double-sided operation, with a total of 6 brush units. Machine suitable for integration into a production line due to constant table height. Working width: 250 mm Passage width: 300 mm Passage height: approx. 100 mm Minimum workpiece length: approx. 500 mm Equipped with: 2x bottom brush units, each 1.5 kW, frequency-controlled, suitable for structuring and sanding 2x bottom brush units, each 1.5 kW, frequency-controlled, suitable for structuring and sanding 2x top brush units, each 0.75 kW, frequency-controlled, suitable for fine sanding Gujdpfx Aajwylrfjcoh Pneumatically operated pressure rollers for workpiece guidance and stabilization Feed speed infinitely variable, approx. 5 - 25 m/min. Extraction connections: 150 mm Dimensions: approx. 2045 x 1350 x 1700 mm (LxWxH) Weight: approx. 1000 kg

Condition: like new (used), As-new used belt grinder with internal extraction Guedpfx Aaowrz Srjcoh

Condition: good (used), Code: 0413 Brand: STEMAS - ITALY Model: PAF - CE Standard Automatic electronic 6-group sanding machine for edges, for panels, on flat and shaped edges, solid, veneered, unfinished, painted, profiles, funeral caskets, frames and various - CE Standard Technical data: Working height min/max mm 15/100 Working length min mm 200 Gedpfx Aajuzvqtocouh Feed on track Electronically controlled infeed guide Carpet with speed variator 6/30 mt/min Electronic pressure group lifting Panel support with electronic positioning Feed on track with rubber pads and adjustable rubber pressure wheels 1° Group swivelling oscillating sander - Pneumatic pad - Motor Hp 4 (Kw 3) electronic speed - Inverter electronic lift - Automatic group entry - Electronic group inclination - Belt cleaning blower - Suction mouth diameter mm 150 2° Group swivelling oscillating sander - Pneumatic pad - Motor Hp 3 (Kw 2,2) electronic speed - Inverter electronic lift - Automatic group entry - Electronic group inclination - Mechanical indicators SIKO - Belt cleaning blower - Suction mouth diameter mm 120 3° Group swivelling oscillating sander - Pneumatic pad - Motor Hp 3 (Kw 2,2) electronic speed - Inverter electronic lift - Automatic group entry - Electronic group inclination - Mechanical indicators SIKO - Belt cleaning blower - Suction mouth diameter mm 120 4° Group oscillating sander - Pneumatic pad - Motor Hp 2 (Kw 1,5) electronic speed - Inverter electronic lift - Automatic group entry - Electronic group inclination - Mechanical indicators SIKO - Belt cleaning blower - Suction mouth diameter mm 120 5° Group swivelling brush - Brush diameter mm 180 - Motor Hp 2 - Mechanical adjustment by handwheel - Electronic speed - Reverse rotation - Suction mouth diameter mm 100 6° Group swivelling brush - Brush diameter mm 180 - Motor Hp 2 - Mechanical adjustment by handwheel - Electronic speed - Reverse rotation - Suction mouth diameter mm 100 Max pressure 10 atm Additional rollers Set of belts Overall dimensions: Machine mm 7400 x 2200 x 1700 h Electrical cabinet mm 1200 x 600 x 2200 h

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Frame sanding machine sanding pad, oscillation, frame sanding device, feed belt, belt cleaning ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Motor: 5.5 kW, Gsdpfx Aou R Tbhjacsuh weight: 550 kg

Condition: good (used), 8-station tool turret, manually rotatable, for retrofitting 8 x turning tool holders 8 x drilling tool holders Siegfried Volz Machine Tools Guodpfjwg Rv Nox Aaceh Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel

Condition: new, Edge sanding machine Bernardo HV 80 OSZI work table: 850 x 300 mmTable height adjustment: 90 mmBelt length: 2510 mmBelt width: 150 mmSanding belt rear wall: 950 x 200 mmSanding unit lockable: 90° / 0°Belt speed: 16 m/sec.Additional table: 300 x 250 mmSuction connection: Ø100 mmRoller diameter: 110 mmMotor output power: S1 1005 kW (2.0 PS)Motor input power: S6 401 kW (2.8 PS)Voltage: 400 VMachine dimensions (W x D x H)1400 x 680 x 1220 mmWeight approx. 148 kg Guodpfxjd Tb U Se Aacsh

Condition: good (used), 1 x edge sanding machine Christians KB 2 Technical data: Working range: Ruler length: 370 mm Gusdpfefwx Daex Aaceh Sheet thickness: 0 to 2 mm, max. edge clearance with completely opened rulers 3 mm Speed: 3400 rpm grinding wheel 150 x 125 x 42 mm + 125 x 90 x 42 mm Accessories: 2 x grinding wheel with flange 1 x additional flange 1 x key for grinding wheel change The machine can be inspected under power.

Condition: good (used), Year of construction: 2006, Used grinding machine from Kraku (DE) Type: BTS 150 Belt width: 150 mm Godpfowc Nl Ujx Aacsuh Circular grinder with a diameter of 300 mm

Condition: good (used), Code: 0114 Brand: SCM MINIMAX Model: UNILEV 150 Universal sanding machine for straight and round parts , furniture, window frames , panels, doors, window frames and various Guodpfx Aajwh Uaujceh Technical data: Lenght of worktables mm 1440 Tilting worktable 0-45° Motor 3,3 Kw Sanding belt width mm 150 Sanding belt lenght mm 2170 Pneumatically controlled oscillating belt Suction port diameter mm 120 Overall dimensions: mm 1440 x 720 x 1550 h Weight kg 470

Condition: used, Year of construction: 2005, machine/vehicle number: 0411490843, With new carpet Technical data: - Manufacturer: Bütfering - Type: Optimat SCO 113/C/DIA - Year of construction: 2010 - Sanding belt width: 1370 mm Gusdpsu U Ry Hofx Aacoh - Sanding belt length: 2150 mm - Suction volume: approx. 3,530 m3/h - Suction nozzle: 1 x Ø 180 mm (sanding unit) 1 x Ø 140 mm (finishing brush) 1 x Ø 100 mm (suction fan) - Combined sanding unit with switchable sanding sanding drum and sanding pad. - Automatically adjustable, profiled steel steel contact roller with grain equalisation for calibration an electronically controlled pressure beam with lacquer sanding package. - Infinitely variable frequency-controlled sanding belt speed sanding belt speed 2 - 18 m/s. - Vacuum clamping device, fan integrated in the machine stand - Drive motor: 15 kw - Total connected load: approx. 19 kw - Operating voltage: 400 V / 50 HZ. - Location: in stock

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Gujdpet Tqy Esfx Aacjh Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, Bernardo edge sanding machine KSM 3000 C with veneer sanding device Technical specifications working table 960 x 350 mm table height adjustment 210 mm belt length 3000 mm belt width 150 mm sanding belt back 1060 x 200 mm sanding unit swivelling 90° - 45° belt speed 20 m/sec. additional table 330 x 330 mm Oscillation stroke 20 mm Oscillation motor 0,25 kW (0,34 PS) suction connection Ø 120 mm Motor output power S1 100% 3,0 kW (4,0 PS) Motor input power S6 40% 4,5 kW (6,0 PS) Voltage 400 V Machine dimensions (W x D x H) 1910 x 840 x 1020 mm Weight approx. 330 kg Scope of delivery Sanding belt 3000 x 150 mm - K100 Sanding belt oscillation Veneer sanding device additional table Graphite coating Mitre fence Sanding shoe Suction hose Features - Heavy machine stand in torsion- and vibration-free construction, extremely stable - Grooved infeed fence, ideal for sanding veneer overhangs - Suction connection 80 / 100 mm on both sides for optimum chip removal - Oscillating sanding belt ensures high stock removal and a clean sanding pattern - Maintenance-free sanding belt oscillation with separate gear motor, optionally switchable Gjdpfxod N Tdme Aacsuh - Height-adjustable sanding table for utilisation of the entire sanding belt - Standard veneer edge sanding device with fine adjustment - Quick changeover from veneer to solid wood sanding possible - Height adjustment of the working table or swivelling of the sanding unit via handwheels - spring

Condition: good (used), Code: 0116 Brand: GHERMANDI - ITALY Model: OLIMPIA 200 Bottom belt sanding machine for sanding wooden edges, profiles, battens, etc. Technical data: Working width mm 200 Table length mm 1240 Belt development mm 2000 x 200 Belt speed 17 mt/min Working table height mm 820 Motor Hp 4 Vacuum motor Hp 0,5 Overall dimensions mm 1240 x 600 x 1000 h Weight kg 350 Gujdpfxemk T Uij Aacoh

Condition: used, Year of construction: 2002, machine/vehicle number: 02062, The right and left edges are sanded in a single pass. There are 2 brush sanding heads installed on both the left and right sides. Process: 1. The parts are conveyed to the right side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction. 2. The right edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt. 3. The parts are conveyed to the left side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction. 4. The left edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt. - Manufacturer: Supferfici, Delle Vedove - Part width: approx. 1,400mm - Height of sanding head: 80mm - Sanding height: approx. 60mm Gsdpowpwukjfx Aacjuh - Length: approx. 8,800mm - Working height: 880mm - Year of manufacture: 2002 - A new Siemens S7-1200 will be installed for material control. - Location: in stock

Condition: new, Bernardo Belt Grinding Machine KBR 100 x 2000 Duo belt dimension 100 x 2000 mm belt speed 15 / 30 m/sec. min./max. pipe diameter 20 - 76 mm slide adjustment 30° - 90 surface grinding table 400 x 100 mm contact wheel Ø x W 195 x 100 mm suction connection Ø 2 x 100 mm Speed 1410 / 2850 rpm Motor output power S1 100% 2.2 / 2.8 kW (400 V) Motor input power S6 40% 3.0 / 4.0 kW (400 V) Machine dimensions (W x D x H) 750 x 1450 x 1160 mm Guedpfxed Id Ubj Aacsh Weight approx. 158 kg Features Constant belt tension due to spring-loaded tensioning device Standard with cylindrical grinding device for pipes diam. 20 - 76 mm Quick and easy adjustment of the desired grinding angle Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Large dimensioned plane grinding surface with protective cover Slow belt speed (15 m/sec.) optimal for grinding of stainless steel and aluminium User-friendly belt change, fast and uncomplicated Quick and easy change of grinding rollers without tools Different grinding angles from 30° to 90° possible without any problems Shorter processing times compared to milling Scope of delivery Sanding belt K 36 Rubberized sanding roller 1 pc. sanding roller for 3/4" tube (26/28 mm tube) 2 pcs. Hinged protective discs Cylindrical grinding device Grinding and support table 2 x dust extraction nozzles diam. 100 mm 2 pcs. chip collecting container Graphite coating Motor protection switch

Condition: good (used), Code: 0021 Brand: BOHR - AUSTRIA Model: 150/330 Sanding pad for belt sanding machine Universal sanding pad for belt sanders in graphite for solid wood and veneer - mm 330 x 150 Gedpfx Aaoi Art Escsuh Overall dimensions mm 330 x 150 x 100 h Weight kg 4

Condition: used, Year of construction: 2002, machine/vehicle number: 02062, The right and left edges are sanded in a single pass. There are 2 brush sanding heads installed on both the left and right sides. Guedpowpwuqefx Aaceh Process: 1. The parts are conveyed to the right side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction. 2. The right edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt. 3. The parts are conveyed to the left side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction. 4. The left edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt. - Manufacturer: Supferfici, Delle Vedove - Part width: approx. 1,400mm - Height of sanding head: 80mm - Sanding height: approx. 60mm - Length: approx. 8,800mm - Working height: 880mm - Year of manufacture: 2002 - A new Siemens S7-1200 will be installed for material control. - Location: in stock

Condition: good (used), Code: 0749 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Working width mm 1300 Max working thickness mm 130 Min working thickness mm 1 Godpjh T Dzqofx Aacsuh Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Infeed roller conveyor Installed power Kw 32 Compressed air 7 Atm Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

Year of construction: 1996, condition: used, machine/vehicle number: A9611003/0100, Technical data: Gedpowph Rvefx Aacouh - Manufacturer: Venjakob - Type: VBS 1300 - Working width: 1.300mm - Year of construction: 1996 - Operating side: left - Electric height adjustment of the sanding rollers - Constant table height, working height 920+-20mm - Manufacturer of brush sanding heads: Flex Trimm - Number of brush sanding heads: 2 pieces - Diameter of the sanding heads: 280/390mm - Sanding centre length 55mm - Roller1, grit 240, roller2, grit 280 - Speed of the brush sanding heads: 100-1000 rpm - Angled brushes - With brush oscillation - With vacuum belt - Feed speed: 1.5 - 7.5m/min. - Motor power 4KW - Machinelength: 3.500mm - Very sturdily built machine - Colour: light grey RAL 7035 - Total connected load 16KW

Condition: good (used), Code: 0753 Brand: FMB Model: B/3 Gedjrf T S Ijpfx Aacjuh Automatic edge sander for straight, round and shaped edges and profiles, both unfinished and painted Technical data: Working height mm 100 adjustable by handwheel Min working length mm 120 Min working width mm 30 Track feed speed variator 1° oscillating sanding unit - Motor with adjustable speed Lower bevel sanding unit - Motor with adjustable speed Upper bevel sanding unit - Motor with adjustable speed Removable panel support Overall dimensions: mm 3400 x 1300 x 1500 h Weight kg 1900