Used Labels for sale (1,344)

Condition: used, This listing is for a Raymond A Lamb E22 Cassette Labeller The Cassette MicroWriter System is ideal for automating the referencing of processing cassettes with relevant specimen information – providing a secure method of cassette identification. Controllable via an RS232 serial interface, it is possible to link the unit to a wide range of computer equipment and Bar Code systems. This item was removed from a life science lab as surplus to requirements. Features Should the unit run out of cassettes during the sequence, an audible alarm will sound MicroWriter has a serial interface and is controllable from any device with a RS232 communications port. MicroWriter responds to a restricted set of 127 ASCII characters. Special characters are available upon request including foreign languages and customised symbols. Technical Specifications Hopper Capacity: 75 cassette x 6 Tape: 29mm Wide Dsdexzhg Sopfx Adyoup

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Dsdpfx Adot D E Aisyoup Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Year of construction: 2000, condition: used, Max. speed: 11.000 cycles/h, web width: 130-265mm, max. print width: 254mm, format length: 101.6-254mm, max. processing width: 254mm, paper strength: 100-180g/m², max. cardboard strength: 300g/m², length: 10,509mm, height: 2806mm, weight: 9.5t. Dujdedv Nigspfx Adysp

Condition: ready for operation (used), Year of construction: 2008, Stations: 6, labeling capacity: 3000-4000/h, labeling: wrap-around self-adhesive labels, container formats: 200ml-750ml, bottle formats: 330l Vichy/Longneck/30cl BNR, running direction: left-right, rotation direction: clockwise. Documentation available. On-site inspection is possible. Dodpfx Asulkutjdyeup

Condition: ready for operation (used), Year of construction: 2020, A Labelling Machine E-Packaging S.r.l. for bottling lines, including a printing system, is available. Max. Speed: 20m/min, label length: 500mm, label width: 10-140mm, product height: 30-150mm. The machine was stored and not used, has therefore not been serviced, no known defects, documentation available. An on-site inspection is possible. Dsdjuxdhnepfx Adysup

Condition: ready for operation (used), A labeling machine in a special design is available. It can apply a continuous label to the top and sides, for example for jams, honey jars and more. The machine has never been used. Documentation available. On-site inspection is possible. Dsdpfxjwixzfe Adyeup

Condition: ready for operation (used), Year of construction: 2006, A Krones labeling system with three labeling units is available. Labeling type: variable, wet glue units: 2, self-adhesive units: 1, max. labeling capacity: 72000 containers/h, gripper bore: 150mm, threaded bore: M8, pitch circle: 195mm. Machine dimensions X/Y/Z: approx. 2550mm/2550mm/2500mm. Documentation available. An on-site inspection is possible. Dodpfox E Advjx Adyoup

Condition: ready for operation (used), Year of construction: 2011, A cold glue labeling machine by Krones is available. Concept: rotary type, label type: cut paper labels, max. label width: 180mm, labeling capacity: approx. 6000 bottles/h, machine dimensions X/Y: approx. 3000mm/3000mm, weight: approx. 3500kg. Documentation available. On-site inspection possible. Dedpfx Adjxqgxljyjup

Condition: ready for operation (used), Year of construction: 1998, A fully automatic rotary labeling machine Anker is available. Labels: body/chest/seal/diagonal strip/neck ring/back, nominal labeling capacity: 7000/h, rotary stations: 8, conveyor height range: 800mm-900mm, conveyor length: 3100mm, bottle types: Euro/NRW/Ale, volume: 330ml. Machine dimensions X/Y: approx. 3750mm/2750mm, operating hours: approx. 14500h. Some small parts and components were renewed in July 2024. Documentation available. An on-site inspection is possible. Dujdpfxeyhgnvj Adyep

Condition: ready for operation (used), Year of construction: 1984, A cold glue rotary labelling machine Krones is available. Product: wine, bottle formats: 0.75l/1l, labelling capacity: 10000 bottles/h. Includes all format parts and spare parts. Documentation available. An on-site inspection is possible. Expected to be available from February 2026. Duedpfx Aew H Avhodyop

Condition: ready for operation (used), Year of construction: 2018, A Grafisk Maskinfabrik roll-fed labeling machine with integrated printing system is available. Web width: 330mm, web speed: 100m/min, rewind reel min./max.: 25mm/73mm, substrate thickness min./max.: 40g/300g/m², torque: 10Nm-100Nm, max. reel diameter: 250mm, machine weight: approx. 1300kg. Documentation available. On-site inspection is possible. Dujdpfjwufzcsx Adyop

Condition: ready for operation (used), Year of construction: 2021, Product features: rectangular and dimensionally stable, labeling capacity: 30 products/min, compressed air connection: 6bar, printing process: Thermal transfer printing, product weight range: 15g-1000g, machine weight: approx. 600kg. Label length range top: 15mm-160mm, label width range top: 30mm-300mm. Label length range bottom: 15mm-120mm, label width range bottom: 30mm-300mm. Product dimensions X/Y/Z on top: 30mm-300mm/50mm-250mm/50mm-150mm. Product dimensions X/Y/Z bottom: 140mm-300mm/50mm-250mm/50mm-200mm. Product dimensions X/Y/Z top and bottom: 140mm-300mm/50mm-250mm/50mm-150mm. Including a two meter long and 150mm wide conveyor belt and 180° Dorner conveyor belt. Documentation available. On-site inspection is possible. Dodevcc S Ajpfx Adysup

Year of construction: 2007, condition: ready for operation (used), A complete bottle filling, sterilizing, capping, labelling, cartoning and palletizing line for the wine industry is available. Bottle filling capacity: 4000 bottles/h, bottle format sets: 1l and 0.75l Schlegel/Bordeaux/Bugunder/0.5l/0.25l, sterilizer capacity: 4000 bottles/h, capper capacity: 8000 bottles/h, labelling capacity: 10000 bottles/h, capping capacity: 10000 bottles/h, carton formats: 12 and 6-bottle crates/12 and 6-bottle cartons, palletizing capacity: 1000 cartons/h. Line components: 1) Normpack Compact Form CF 670/980 carton folding machine, year of manufacture: 2000, output: approx. 650 cartons/h, 2) Stork VV-24 L.W. bottle filling machine, Year of manufacture: 1977, 3) Silmo ST XII/110 v ozone immersion bath sterilizer, year of manufacture: 1983, bottle formats: all standard wine bottles, 4) Miho LC 2000 caustic tester, year of manufacture: 2003, 5) Kapsler Robino & Galandrino Monoblocco Fenix 3, year of manufacture: 2002, 6) Syscona Unicount closure checker with counter for cork and metal closures, 7) Garnep Lebetta 4/3/18 1320 labeller, year of manufacture: 2017, including 2x wet gluing units, 3x SK units, camera system for rough alignment of bottles and domino laser for imprints, 8) Adelski PP2004 Longcap automatic capping machine, year of manufacture: 2007, 9) Adelski MCA PV 6541/1/210 AVM2104 automatic capping machine, year of manufacture: 1999, 10) Corker Bertolaso Delta, year of manufacture: 1977, 11) Carton sealing machine Normpack NCF-047, year of manufacture: 2001, including hot melt gluing unit, 12) Packaging machine Kettner Robot Junior Packer BE 2-T, year of manufacture: 1992, 13) Pallet loading machine Kettner Pressant Universal 1200, year of manufacture: 1992, 14) Crate labeling machine Weber Legi-Air 40XX, year of manufacture: 2004, 15) Dryer Okema T3, year of manufacture: 1999, 16) Carton printing machine Blum CompactLine 3. 0, number of heads: 8, printing options: double-sided, 17) Silmo 40g ozone generator, year of manufacture: 1983, 18) Schaberger glass lifting machine, year of manufacture: 1977, including new glass head, 12-bottle crate head and bottle table. Documentation available. On-site inspection is possible. Djdpfevur Htsx Adyjup

Condition: ready for operation (used), A rotary labelling machine for bottles from the manufacturer GERNEP GmbH is offered. Front and back labels, wet glue/cold glue units, self-adhesive units. Inspection by arrangement possible. Dsdpfoxxl Izjx Adyeup

Condition: used, Labeling machine for top and bottom, with a ZODIAC printer for the top labels. Dusdpfeyaqttjx Adyep

Condition: like new (used), Features: * Linear machine designed for applying front and back labels on glass jars of various shapes and sizes (rectangular, cylindrical, and oval). * Suitable for full or empty containers. * Up to 2 labels per container. * Partial or wrap-around labels (on cylindrical containers). * Opaque or transparent labels. * Stainless steel safety cabinet. * Maximum label height: 150 mm. Duodeyn Hddjpfx Adysp * Minimum label height: 10 mm. * Includes 2 ETIMA unwinders, model: DAD-200. * Max. output: 15,000 containers/hour. * Min. output: 5,000 containers/hour (83 containers/min). * Output may vary depending on the container.

Condition: used, Year of construction: 2008, machine/vehicle number: ET226, Machine Overview Automatic inline pressure‑sensitive labelling machine equipped with two self‑adhesive application stations for front and back labels. The system conveys containers in a linear path and provides positive product control via an integrated spacing device, wrap/rolling unit and a top hold‑down counter‑belt. At the machine exit a dedicated smoothing system ensures optimal label adhesion and finish. The unit is suited for medium to large containers in the 1–10 L range and has been refurbished in 2022 to extend lifecycle and reliability. Designed and built by P.E., model PACK LAB, year of manufacture 2008. Key Technical Data Configuration: Linear labeller with 2 self‑adhesive stations Labelling method: Pressure‑sensitive (adhesive) labels Label placement: Front and Back (single or dual application) Optical centering: Not equipped (mechanical guidance and product handling) Container range: 1–10 L containers (typical rigid bottles/cans with stable base) Product handling: Container spacing device, wrap/rolling unit, top hold‑down counter‑belt Outfeed: Label smoothing system at machine exit Protection class: IP54 (machine and electric motors) Year: 2008 | General overhaul: 2022 Productivity: 6000 bph Automation & Control Control architecture: Industrial PLC‑based control with 24 VDC auxiliaries for machine logic Electrical distribution: 400 V ±5%, 50 Hz, 3P + N + PE (neutral and separate protective earth) Instrumentation supply: 24 VAC / 230 VAC Dedpfx Aoyhcgzsdyeup Operator interface: HMI with recipe/format management and station status (typical for this series) Sensors and interlocks: Safety‑interlocked guards, product presence and label application monitoring Line Integration Infeed control: Integrated spacing module stabilizes product pitch before labelling Product stabilization: Top hold‑down counter‑belt and wrap/rolling unit for accurate label placement Outfeed quality: Smoothing/pressure elements at discharge to ensure adhesion and finish Mechanical interface: Linear conveyor path suitable for integration into existing bottling/packaging lines Utilities interface: Standard industrial electrical connections as specified below; no optical centering required Condition & Maintenance Refurbishment: Comprehensive overhaul performed in 2022, including verification of application stations, drive components, belts/rollers, guarding and electrical sections Preventive maintenance: Routine service recommended on label unwind/rewind groups, rollers, belts and sensors according to operating hours and label materials Spare parts: Standard wear components readily serviceable for long‑term support Performance & Versatility Applications: Front and back labelling on a wide variety of rigid containers in the 1–10 L segment (e.g., food, beverages, household/industrial chemicals) Materials: Compatible with common pressure‑sensitive label stocks (paper and film) and standard adhesives Changeover: Recipe‑based adjustments with mechanical guides and positioning scales to reduce format setup time Quality: Stable product handling and final smoothi...

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this used Durfo D1Z labelling machine, year of manufacture 2015, for self-adhesive bottle labels with inkjet printer for, e.g., best-before date or batch number on the label. Model: D1Z Year of manufacture: 2015 Serial number: AB1699E Djdpfx Aeym Sppsdyeup Operating voltage: 400 V Number of phases: 3 Frequency: 50 Hz VIDEO available on request! If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2006,  6 x flexographic printing units  Die cutting unit  Central impression design  VETAPHONE corona treatment unit  Web cleaning system  UV drying system with exhaust and ducting  Technotrans temperature control / ink cooling unit  Web guiding system  Infeed and rewinder units  Control panels per printing unit  Safety guards and emergency stop system  Central electrical cabinets Dsdpfjyhpmbsx Adysup  Printing cylinders  Anilox rollers

Condition: used, Year of construction: 2010, operating hours: 15,000 h, machine/vehicle number: M312, Technical Specifications and Performance Data This pre-owned monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functions into a compact rotary system designed for professional beverage production. The machine is equipped with a double capsule applicator with rotating heads for precise capsule application and three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting high-quality wines and can be integrated into a used bottling line or as a stand-alone module in an industrial packaging environment. Manufacturer: Omar Model: Simphony Washer-Dryer Year: 2010 Configuration: Drying module + double capsuling unit with rolling heads + 3 self-adhesive labeling stations (front/back/neck) Bottle Formats: Compatible with Bordeaux and Burgundy bottles Label Application: Pressure-sensitive (self-adhesive) for front, back, and neck Container Type: Glass bottles Format Examples: Reference capacity 0.5 L Application: Suitable for integration into beverage production lines and industrial filling Advanced Automation and Control Systems The monoblock is designed for synchronized operation of the drying, capsuling, and labeling units. The self-adhesive labeling stations ensure precise application with fine adjustment for front, back, and neck labels. The double capsuling stations with rolling heads ensure consistent finishing quality on wine capsuling units. Rapid mechanical adjustments support the changeover from Bordeaux to Burgundy bottles, improving production flexibility in existing bottling lines. Production Line Integration Capability Designed for in-line operation, the unit interfaces upstream with fillers and capping/closing machines and downstream with inspection and packaging equipment. It adapts to standard conveyor logistics, enabling smooth transfer of glass bottles. Format changes between compatible wine bottle geometries are supported, making the machine suitable for multi-SKU beverage production. Machine Condition and Maintenance History The machine has undergone a thorough restoration, which included purchase, transport, and recommissioning, resulting in a fully functional and reliable second-hand asset. It is ready for use in a production setting, suitable for rapid integration into an existing bottling line. Operational Performance and Versatility Dusdpfxoygh I Us Adysp Optimized for glass wine bottles, the monoblock combines drying, precise capsule application with rolling heads, and three-point self-adhesive labeling. This configuration supports premium packaging standards and is suitable for wineries and beverage producers seeking consistent presentation quality in an industrial packaging environment. Installation Requirements and Site Preparation The rotary machine’s compact footprint allows for easy placement within typical bottling rooms. Connection to existing conveyor belts and utilities is recommended for optimal integration. The site layout must allow for safe operator access around the guards and clear spaces for format changeovers and routine maintenance. Certification of Conformity and Safety Standards The monoblock includes protective guards around the moving units, with standard operator guards and emergency stop functions typical of modern bottling...

Condition: like new (used), functionality: fully functional, This type of machine belongs to the group of linear industrial labelling machines. This type of machinery is particularly suitable for cylindrical and flat containers, depending on requirements. - Production output may vary depending on the container. Features: - Maximum reel diameter: 220 mm. Duodpeynkm Aofx Adysp - Minimum mandrel diameter: 40 mm. - 8 cm PVC hinge conveyor belt.

Condition: good (used), Year of construction: 2008, MR Closure Labeller Type 393 Duedeyghtwjpfx Adyep

Year of construction: 2022, condition: excellent (used), functionality: fully functional, For sale: Automatic industrial labelling machine designed for labelling round containers of various capacities starting from 25 ml (and similar dimensions). The device is fully operational and ready for immediate use. Technical specification: • Type: Automatic industrial labelling machine • Container capacity: ~50 ml (ideal for cosmetics, pharmaceuticals, food products) • Operating mode: Continuous – integrated belt conveyor • Label type: Self-adhesive from roll • Control: Control panel with digital display • Drive: Electric motors with gearboxes • Power supply: Standard 230V • Construction: Stainless steel – robust, corrosion-resistant and easy to maintain • Adjustments: Height and width of guides, pressure rollers, and labelling head • Labelling speed: Adjustable according to requirements • Conveyor belt width: up to 113 mm • Vertical working range: up to 250 mm • Horizontal working range: up to 113 mm • Conveyor belt height: up to 50 mm • Max label height: 30 mm (can be modified to 195 mm with a simple adjustment) Compatible devices can be found in our other listings. Complete production lines can be configured: • Automatic labeller for containers from 25 ml and similar • Automatic capping and cap application machine • Stainless steel cap feeder • Automatic labeller with belt conveyor – self-adhesive labelling system • Stainless steel rotary infeed/outfeed table for production lines Application: • Cosmetics industry – labelling vials, cream and oil containers • Pharmaceuticals and laboratories – vials, bottles, supplements • Food products – sauces, samples, spices • Household and technical chemicals – small liquid containers Dodpfx Adsxftnvjysup Advantages of the device: • Fully automatic operation • Highly precise label application • Robust industrial construction • Intuitive control panel • Adaptable to different container sizes (with minor configuration changes) Included in the set: • Complete labelling machine with integrated belt conveyor • Bottle guiding and stabilising system • Adjustable labelling head • Control panel • Freestanding version – ready for integration into production line Technical condition: Used, in very good condition. Regularly serviced. Ready for operation. On-site testing possible. VAT invoice issued. Technical support and training available on request.

Year of construction: 2008, condition: good (used), Marel AEW delford weigh price labeler Duodpfx Aog Hwnkjdyjp Model: 8160 Serial: 82012 2008, Stainless weigh price labeller, min weight 1.5kg - max weight 20kg, scale interval 1/2g, Max tare weight -1Kg, overall length 2750mm, belt width 200mm, weigh platform 200mm x 240mm, with spares and manuals, 1Ph

Year of construction: 2012, condition: ready for operation (used), There are eight identical label dispense available, speed: 0-80m/min, output: 1000 label/ min, length: 700mm, width: 320mm, height: 500mm, including accessories. Dusdpfxsflmc Ne Adyop