Used Kunzmann Wf4 3 for sale (70)

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank Pgjdpfx Aheiqkc Is Tsu

Condition: good (used), Year of construction: 2000, functionality: fully functional, Availability – immediate Good technical condition Location – Warsaw. Configuration: Pgodpfx Ahoxn Sy Ne Tsu - High-pile feeder, - Soundproof covers, - Controller with counter and batch marking, - 6 folding pockets, - 2 folding knives, - Mobile stream delivery. TECHNICAL SPECIFICATIONS Max. input format: 52 x 80 cm (parallel fold); Min. input format: 15 x 19 cm (parallel fold); 15 x 19 cm (cross fold) Paper weight range: min. 40 g/m², max. 300 g/m² Minimum fold length: 45 mm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Tool Milling Machine Kunzmann WF 610M with Heidenhain TNC 128 Control – Like New Condition – Only 182 Spindle Hours – CE Compliant!! Technical Data: - Year of manufacture: 2020 Machine number: 610978 - Milling table clamping surface: 800 x 425 mm Number of T-slots: 6 Slot width: 14 H7 Slot spacing: 63 mm Maximum load: 300 kg - Spindle speed range: 1–4500 rpm - Feed rate: up to 5 m/min - Travel (X/Y/Z): 610 / 400 / 450 mm - Vertical and horizontal quill: SK40 - Hydraulic clamping system - Weight: approx. 2,200 kg - Dimensions (approx.): 2 x 2 x 2 m - Main drive motor (100%/25% duty cycle): 8.5 / 16.2 kW Equipment and Accessories: Psdjw Ifdiopfx Ah Tsgu - Heidenhain TNC 128 CNC control - Heidenhain electronic handwheel - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: For sale is a Kunzmann WF 610M tool milling machine equipped with a Heidenhain TNC 128 control unit. The TNC 128 provides numerous dialog-guided cycles with graphical simulation for fast and user-friendly data input, e.g. various drilling cycles, thread cutting, hole circles, linear hole patterns, rectangular pockets, rectangular tenons, and surface milling. This universal milling machine is in near-new condition. The control system is very user-friendly. Additionally, the machine is equipped with hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal mode is very easy thanks to the swiveling vertical head. The linear guides are lubricated regularly via the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann under power on site.

Condition: good (used), travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, mount diameter: 40 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 700 mm, table length: 425 mm, power: 5 kW (6.80 HP), X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 700 x 425 mm Spindle nose: SK 40 Spindle speeds: 1 - 4000 rpm Spindle stroke: 60 mm Featured with: - ISO toolholders - Cooling unit - User Manuals Pedpfsrxry Tjx Ah Tsgu Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

Condition: used, Year of construction: 1972, Milling machine used Make:Kunzmann Model: UF6N year of construction: 1972 Technical data: Table longitudinal travel automatic: 440 mm Table longitudinal travel by hand: 450 mm Transverse table travel 200 mm Table vertical travel horizontal/ vertical 465/500 mm Table size 860x240 mm Podpfx Ajudb N Dsh Tsgu Table swivels 45° on both sides Distance table/spindle 430 mm Spindle holder ISA 30 Quill stroke 60 mm Tiltability of the spindle head +/- 90 18 spindle speeds horizontal 32-1342 rpm 18 spindle speeds vertical 72-2888 rpm 6 automatic feeds lengthwise 13.12-164 mm/min 6 automatic cross feeds 26.24-328 mm/min. Spindle drive 1.8/2.6 kW with inclinable vertical milling head/clamping vice/ Counter holder/collet chuck with collets Weight approx. 850 kg Dimensions approx. 1400x1900x1800 mm

Year of construction: 2000, condition: ready for operation (used), Folding units buckle plate/sword: 6/2, max. sheet dimensions X/Y: 800mm/540mm, min. sheet dimensions for parallel fold: 150mm/210mm, min. sheet dimensions for cross fold: 150mm/210mm, min. sheet dimensions for triple fold: 210mm/300mm. Folding capacity with parallel fold/cross fold: 40000/22000 sheets/h, paper weight range: 40g-300g/m². Machine dimensions X/Y/Z: approx. 3700mm/1500mm/1700mm, weight: approx. 1300kg, machine working area requirement: approx. 5500mm/3000mm. Including flat pile feeder with suction drum from Kremser, a movable and variable delivery for parallel and cross breaking as well as compressor. Documentation available. On-site inspection is possible. Psdpfxjvwcxlo Ah Tsgu

Condition: used, Year of construction: 1990, Motor output 5 kW Weight 1.500 kg Control cnc Pgsdpfxswgnz Ns Ah Teu

Condition: used, Cross support, cross support, cross table, cross slide table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420 / H730 mm -Weight: 80 kg Pjdpfx Aog Dg Rpjh Tegu

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control System | Excellent Condition | CE-Compliant! Technical Data: Pgodpfx Ajwz Eu Neh Tsu - Year of manufacture: 2015 | Machine No. 610398 - Milling table clamping surface: 800 x 425 mm - Clamping slots: 6 - Slot width: 14 H7 - Slot spacing: 63 mm - Maximum load: 300 kg - Spindle speed range: 1 – 4500 rpm - Infinitely variable feed: 0–2000 mm/min - Rapid traverse (X and Y axis): 5000 mm/min - Z axis: 4000 mm/min - Travel (X/Y/Z): 600/400/400 mm - Vertical and horizontal quill: SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (L x W x H): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Power rating at 100% duty cycle Accessories and Equipment: - Heidenhain TNC 128 control system - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: Offered here is a tool milling machine Kunzmann WF 600M equipped with a Heidenhain TNC 128 control system. The TNC 128 provides numerous dialog-guided cycles with graphical simulation for quick and easy data entry, such as various drilling cycles, tapping, bolt circles, linear hole patterns, rectangular pockets, rectangular tenons, and surface facing. This universal milling machine is in like-new condition. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operation. Switching from vertical to horizontal is very simple by swiveling the vertical head to the side. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested at our facility. You are welcome to view and test the Kunzmann under power on-site.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kunzmann WF 600 M milling machine (2012) Manufacturer: Kunzmann Type: WF 600 M Year of manufacture: 2012 Condition: used, very good Control: Heidenhain TNC 124 X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Table length 650 mm Table width 350 mm Spindle speed 4500 rpm Vertical spindle and horizontal spindle - SK40 Pgodpewp Hv Refx Ah Teu Hydraulic tightening system Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx. 2000 kg Coolant system Scope of delivery: - Documentation - Machine light - Machine feet - Machine vice

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Year of production: 2005 Pedpfx Aherx S Iws Tjgu Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine in use; possibility to carry out work tests during inspections; Good technical condition; Folding machine manufactured by the renowned German company GUK equipped with a high pile feeder (sheet picking with a suction roller from above) FL2-50, 2 folding pockets aggregates, pocket with maximum working widths of 50 cm and mobile chute delivery. Folding machine GUK model FA 50/6-6 FL2-50 – infeed width 500 mm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: 45 mm Feed rate of sheets from feeder: 40 - 180 m/min Maximum performance: 27.000/from sheet A4 Power supply: 400 V/50 Hz Machine equipment: High pile feeder FL2-50; Batch counter. Multifunction counter programming the operation of the machine. Ability to fold sheets in groups (lots) of the given number in each lot, with stepless adjustment of the spacing between parties. I. folding unit FA 50/6, 6 folding pockets; Sound reduction hood, top. II. folding unit FA 50/6, 6 folding pockets Sound reduction hood, top. Mobile chute delivery S 520. To be added after I or II folding station.

Condition: new, Year of construction: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain TNC 128 control system Paths X/Y/Z = 610/400/450 mm Speed 1-4500 rpm Power 8.5 kW at 100 % ED Spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 Fixed angle table 800x 425 mm 6 x 14 H7 T-slots coolant device 66 liters electric handwheel HEIDENHAIN HR 510 FS Further technical data is available on request. Pgsdpfxouf Sv De Ah Tju The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available and can also be inspected. Please register in advance.

Condition: good (used), Year of construction: 1980, For sale: 1 piece milling machine Manufacturer: Kunzmann Type: HF6/2V YEAR OF MANUFACTURE: 1980 For speeds see type plate Pedsq Rfqbjpfx Ah Togu Table: 700 x 170mm Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: used, Universal milling head, milling adapter, milling extension, angled milling head, universal milling angled head, milling angled head, milling head, top head Pgjdpfxsg Dg R Ns Ah Tju -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Gear: 31 teeth -Dimensions: 505/180 / H195 mm -Weight: 30 kg

Condition: used, z-travel:380 mm y-travel:400 mm x-travel:500 mm Pgedpfscxxmqjx Ah Teu tool taper:SK 40 vertical head swivelling:beidseitig 90 Grad table-size:LxB 700x425 mm dimensions of the machine ca.:2x2x2 m quill stroke:60 mm groove width:14H7 mm flute distance:63 mm weight of the machine ca.:2 t total power requirement:10 kW Speed range of live tooling:5 - 3000 min -1 Loading:max. 250 kg clamping slots:6 power capacity - milling spindle:5,5 kW

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Pgsdpfxswp Hv Ds Ah Teu Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet – Machine light

Condition: used, Year of construction: 1977, Technical details: x-travel: 450 mm y-travel: 200 mm z-travel: 400 mm spindle taper ISO: SK 30 distance table/horizontal spindle: max. 400 mm cross rail adjustment - horizontal: 400 (manuell) mm range of revolution per miute: horizontal: 30 - 1275 / 18 step U/min spindle taper: horiz.+vertikal: SK30 distance between table/spindle: vertikal: max. 430 mm quill travel: 60 mm swival range +/-: 90° Grad range of revolution per miute: Vertikalspindel: 50 - 215 / 18 step U/min clamping surface area: 860 x 240 mm table swivable approx.: 45° feed:: 0 - 1.000 / steples mm/min Pgodpfx Ahjvc Awfs Tsu rapid traverse: 2.000 mm/min. total power requirement: 6,0 kW machine weight approx.: 3100 kg dimension machine xH: 1,6 x 1,6 x 1,9 m Coolant device 3-way DRO Heidenhain control panel Accessories see photo *

Condition: used, Counter bearing, bearing block, pillow block, bearing for milling machine, upper support Pjdpfx Aod Tx E Neh Tjgu -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, Kunzmann WF 7 CNC milling machine TNC 410 control Manufacturer: Kunzmann Type: WF 7 Year of manufacture: 2001 Condition: used, under power Control: Heidenhain TNC 410 X-path 610 Y-path 400 Z-path 400 SK 40 housing Pgedpfjwp Hvdox Ah Tju Speed 1-5000rpm Tilt/swivel table Scope of delivery: - Underlays - Various tool holders

Condition: excellent (used), Year of construction: 2016, operating hours: 9,025 h, functionality: fully functional, Kunzmann BA 1000 machining center (2016) Manufacturer: Kunzmann Type: BA 1000 Year of manufacture: 2016 Control: Heidenhain iTNC 530 HSCI Condition: used, good, in production X-travel 1020mm Y-travel 620mm Z-travel 610mm Feed 15m/min Rapid traverse 30/30/24 m/min InLine milling spindle 1-12000rpm Tool holder ISO 40 DIN 69871 Tool magazine 32 slots Clamping table 1200×610 mm 6 T-slots 18 H 8 Table load 850kg Automatic central lubrication Spindle oil cooler Chip flushing hose Spindle blow-out system Coolant device Hinged conveyor belt (right or Left) Podpfowp Hu Tox Ah Tsgu IKZ 25 bar Internal cooling by air Handwheel HR410 Infrared button TS632 Power consumption 35kVA Length 450cm Width 230cm Height 260cm Weight 7800kg Without clamping device