Used Keyboard for sale (441)

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit • Stepless fine adjustment of the axes via +/# buttons • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools • Storage of the scoring position (3-axis scoring unit) • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes Cjdsyyap Ejpfx Ac Tjhb • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm • Vario drive 5.5 kW (7.5 hp) VAR

Condition: ready for operation (used), Leukhardt LS-IC / ISA-K, ID 6307080 – Industrial computer with monitor and keyboard, 482 x 310 x 410 mm. Serial number as shown in the photo. Used, minimal signs of wear, 100% functional. Scope of delivery as shown in the photos. Csdpfx Aji Ebycec Tohb

Condition: ready for operation (used), Leukhardt LS-IC / ISA-K, ID 6307080, industrial computer with monitor and keyboard, 482 x 310 x 410 mm, serial number as shown in the photo, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Chsdpfx Aei Ebx Ujc Tsb

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Csdpfx Acszw Ukce Tjhb Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, hilips MAHO CNC 3460 Control / Display Panel – Industrial Spare Part For sale is an original control/display panel from a Philips MAHO CNC 3460. Details according to the nameplate: Manufacturer/Model: Philips MAHO CNC 3460 Device type: EP00850200 Serial No.: Power supply: 100–250 VAC, 50/60 Hz Connections for service keyboard / TTL Original metal industrial housing The panel shows signs of age and use, including scratches, dirt and some corrosion on the mounting frame. Cjdezu Danepfx Ac Tohb Condition: Used, untested, sold as shown in the pictures. Suitable as a replacement part, for repair/restoration, or as a parts donor. Included: Exactly the panel shown in the pictures.

Condition: as good as new (ex-display), Working width 630 mm Working height 3-310 mm Motor output 7,5 kW Number of knives 4-TERSA St. Feed speed 6-20 m/min. Vertikal stroke elektrisch FIMAL thickness planer type SP 63 A Demonstration Maschine ----- Chjdpfxeu Uu U Us Ac Tob NEW MACHINE "Partnership Edition" Technical data / basic equipment: ----- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Stock machine additionally equipped with the following options: ----- ----- - Motor with 7.5 kW / 10 hp - Thicknessing table extension, 600 mm - 2x rubberized pull-out roller - TERSA system knife shaft, including reversible knives ----- Promotional price from stock: on request! ----- All prices ex warehouse plus VAT/plus. Freight and assembly at cost (Technical information according to the manufacturer - without guarantee!)

Condition: used, functionality: unexamined, Used ProRheo LS-300 viscometer with controller, and computer with software. Manufacturer: proRheo Chedpfx Acszv S Ame Tsb Model: LS-300 Includes manual, cables, and computer with software, monitor, and keyboard.

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Codpfx Aovvi I Rjc Tshb

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Chsdpfevvkfdjx Ac Teb

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Chodpovvi Htsfx Ac Tob Storage location: Sonnefeld

Condition: ready for operation (used), Year of construction: 2009, number of axes: 8, Welding robot manufactured in 2009. This CLOOS Romat 320 features an integrated 2-axis workpiece positioner with a vertical rotary turntable plate and an L-shaped tilt axis. It includes a full safety perimeter booth with optical safety light curtains and a dual pendant remote control box for station control. If you are looking to get high-quality welding capabilities, consider the CLOOS Romat 320 machine we have for sale. Contact us for further details. - Load Capacity: 15 kg- Own Weight: 205 kg- Controller Unit Model: ROTROL® II- Interface / Input System: Integrated control cabinet panel with compact teach pendant (handheld programmer), full physical QWERTY keyboard drawer, and display unit.- Component/Workpiece Positioner: Integrated 2-axis Cloos workpiece positioner with vertical rotary turntable plate mounted on an L-shaped tilt axis.- Cell Enclosure: Full safety perimeter booth with blue/orange panel walls, integrated sliding or swing doors, and optical safety light curtains on the loading station perimeter.- Manual Operating Panel: Dual pendant remote control box with emergency stop and multi-button configuration for station control. Chodpfx Ajzg H E Doc Tob

Condition: new, CNC Panel Saw Wehrmann WT-38/1040 New machine For the conventional cutting of workpieces made of wood/wood-based materials with laminate (CLP, HLP), paper, foil or veneer Panel dimensions + data (finished panel): Length: from 140 mm Width: min. (finished dimension) 38+38 mm Width: max. (finished dimension) 520+520 mm (asymmetrical cutting is possible) Thickness: 8 mm - 40 mm Weight: approx. max. 30 kg Workpiece shape: rectangular Basic structure: - User-friendly combination machine with adjustable zero line - All drives and adjustments are servo-controlled - The machining motors are frequency-controlled. - Stable steel welded construction - Workpiece transport is carried out by means of a transport belt and height-adjustable top pressure. Base machine: - Sound-absorbing/protective hood with safety interlock - The required connection nozzles for an external extraction system with an air velocity of min. 28 m/sec. (underpressure 2480PA) - A compressed air connection incl. maintenance unit. - Integrated control cabinet with cooling unit for operating the machine at an ambient temperature of 10 - 45 degrees Celsius - PC control Beckhoff - Safety and protection devices according to CE guidelines - CE marking Feed rate v= 5 - 40 m/min servo-controlled drive Electronic height adjustment of 5 - 45mm adjustable via Beckhoff servo axis Stop ruler made of Teflon on the right side of the machine adjustable via Beckhoff servo axis Chjdpfx Acozvdw No Tjb Infeed ruler on the left with pneumatically sprung unit adjustable via Beckhoff servo axes Machine equipment: Unit 1: Slitting saw, frequency-controlled Milling stand with column guide and connecting plate Motor Perske 4.4 KW 50 Hz 400 Volt 4500 RPM. Tool holder D = 35 keyway External + internal thread right / left, controllable via servo drive, operating in the same direction, not swiveling with height adjustment via Beckhoff servo axis Lateral adjustment with mechanical digital display Saw blade max. 350 mm without tools Flow-optimized extraction hoods Unit 2: Saw motor, frequency-controlled Milling stand with column guide and connecting plate Saw motor not controllable, operating in the opposite direction Motor Perske 6 KW 50 Hz 400 Volt 5000 RPM. Tool holder D = 35 wedge shaft with external + internal thread right / left Saw blade max. D400 mm without tools with manually adjustable splitting wedge with height adjustment via Beckhoff servo axis Lateral adjustment with mechanical digital display Flow-optimized extraction hoods Beckhoff control technology - PC-based control system with integrated PLC and electronic path control - Virtually unlimited program memory - Operation via keyboard / mouse / touch - Reporting system for operator and error messages - MDE Basic for recording machine data, production time, set-up time, downtime, fault time, quantity and adjustable recording period - Fast data exchange between control and I/O component via EtherCat - Uninterruptible power supply for panel PC - Feed lock for adjacent machines or transport - Powerful panel PC with integrated 15.6 inch display with touch screen, integrated keypad, keyboard and mouse - USB port - Fast EtherCat interface (field bus) - Ethernet network connection RJ45 - Operating system Windows with TwinCat 3 system for real-time control

Condition: new, SIEMENS P/N SINUMERIK OPERATOR PANEL Codeylcr Sjpfx Ac Tshb OP 012: 12.1" with membrane keys and mouse ID - 1P 6FC5203-0AF02-0AA1 ST-V32028510 Made in Germany Immerse yourself in the world of precision and efficiency with the Siemens SINUMERIK Operator Panel OP 012. This state-of-the-art operator panel is the ideal addition to any industrial application, be it in manufacturing, automation, or CNC machining. Featuring an impressive 12.1-inch display, combined with a user-friendly membrane keyboard and mouse, the OP 012 offers intuitive control and monitoring of your processes. Developed and manufactured in Germany, the Siemens SINUMERIK Operator Panel stands for quality and reliability. Each panel is produced to the highest precision to meet the rigorous demands of modern industrial environments. The OP 012 is presented in brand-new condition, including its original packaging. This well-designed packaging ensures your operator panel is optimally protected during transport and ready for immediate commissioning upon arrival. Experience the future of industrial control technology with the Siemens SINUMERIK Operator Panel OP 012—reliability, precision, and efficiency combined in an outstanding product.

Condition: used, SIEMENS SINUMERIK 810D/840D OPERATING PANEL FRONT OP 010, 10.4" TFT (640 x 480) Chedpswtr Hijfx Ac Tjb Version F Resolution: 640 x 480 pixels (VGA) Keyboard: Mechanical keys Compatible with: SINUMERIK 810D / 840D / + Article number (Version F): 6FC5203-0AF01-0AA0 All information is provided without guarantee of accuracy or completeness.

Condition: excellent (used), SIEMENS 6FC5203-0AF22-0AA2 Description: MACHINE CONTROL PANEL KEYPAD/KEYBOARD OPERATOR PANEL SINUMERIK MCP 483C Chjdpfxjyk Iiyo Ac Teb 19" WIDTH 22 MM EMERGENCY BUTTON

Year of construction: 2001, condition: excellent (used), machine/vehicle number: 013012 / 013013, Technical Data Manufacturer: Wenzel Type: RS1625 plus (Two-column) CNC Year of manufacture: 2001 Serial number: 013012 / 013013 Measuring range X = 6500 mm Y = 1600 mm / 1600 mm Z = 2500 mm Measuring table 7200 mm x 3280 mm (divided at Y0) Measuring accuracy 40 µm + (L / 25 µm), but a maximum of 100 µm Accessories Software: Metrosoft CM SP2 Controller: 2 x Wenzel WPC 2030 / Renishaw PI200 Probe Interface Codpfxjfluuwj Ac Tohb Control panel: 2 x Wenzel HT400 (cable) / 2 x Key Sonic keyboard (wireless) / 2 x HP monitor The machine can be upgraded with new software according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in technical data, information, and prices, as well as prior sale!)

Condition: used, Year of construction: 2007, machine/vehicle number: 134418, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Equipment: type plate available, Technical Data Manufacturer: Zeiss Type: Accura 12/18/10 S/N: 13418 Chedpfx Ajxnruaec Tob Year of manufacture: 2007 Measuring Plate Hard stone measuring plate Width: 2,400 mm Depth: 1,700 mm Height: 400 mm Measuring Range X-axis: 1,200 mm Y-axis: 1,800 mm Z-axis: 1,000 mm Accessories Control panel PC unit 2 x 27" monitors, brand BenQ Keyboard Mouse Accessories Stored in a two-door metal cabinet Price: on request! Note: Our offer is aimed exclusively at professional customers. (Subject to change and error in technical data, details and prices as well as prior sale!)

Condition: good (used), Year of construction: 2008, machine/vehicle number: 149616, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 2,500 mm, Equipment: type plate available, Technical Data Manufacturer: Zeiss Model: Pro T Compact S/N: 149616 Year of manufacture: 2008 2 measuring arms Measuring table Width: 3,000 mm Depth: 6,000 mm Travel ranges Y-axis: 1,600 mm Chsdpfxjxnrums Ac Tsb Z-axis: 2,500 mm Equipment 2 x control PCs (FTSD0026; FTSD0029) 4 x 24" monitors, make Eizo 2 x keyboard 2 x mouse Misc. accessories Price: on request! Note: Our offer is directed exclusively at professional customers. (Modifications and errors in the technical data, information and prices as well as prior sale remain reserved!)

Condition: good (used), Year of construction: 2003, Technical Data Manufacturer: Zeiss Model: Carmet Year of manufacture: 2003 2 measuring arms Measuring plate Mounted grid plate Width: 3,100 mm Depth: 2,000 mm Accessories PC unit (FTSD0026) Joystick control 2 x 24" monitors, make Eizo Keyboard Mouse Price: on request! Codexnru Hopfx Ac Tjhb Note: Our offer is intended exclusively for professional clients. (Subject to change and errors in technical data, specifications and pricing, as well as prior sale!)

Condition: good (used), Year of construction: 2012, machine/vehicle number: 158750, measuring range X-axis: 5,000 mm, measuring range Y-axis: 2,600 mm, measuring range Z-axis: 2,100 mm, Technical Data Manufacturer: Zeiss Model: Carmet II Duplex Serial No.: 158750; 157854 Year of manufacture: 2012 2 measuring arms Measuring plate Centrally installed grid/adapter plate Width: 2,600 mm Depth: 4,800 mm Platform installation Measuring range X-axis: 5,000 mm Y-axis: 2,600 mm Z-axis: 2,100 mm Accessories 2 control PCs (FTSD0026; FTSD0029) 4 x 24" monitors, make Eizo Cedpfxsxnruge Ac Tjhb 2 keyboards 2 mice Price: on request! Note: Our offer is addressed exclusively to professional customers. (Subject to changes and errors in technical data, information and pricing as well as prior sale!)

Condition: not inspected (used), Mitutoyo Chsdpfx Aeztyabsc Tsb Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks. For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including the existing PC system, two monitors, control unit, measuring software, and extensive documentation. The existing PC system and the installed QVPAK software start. However, the complete machine and measuring function could not be fully tested. The Quick Vision series is used for non-contact dimensional measurement of workpieces using an optical system, image acquisition, and image processing. Suitable for precise measuring and testing tasks, including those involving components from the electronics, precision mechanics, and industrial manufacturing sectors. Technical data: Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of manufacture: Japan Machine type: CNC image processing measuring machine Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010 Equipment: Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carrier GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the picture Connecting cables and accessories as shown in the picture Application areas: Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision measurement technology Component and contour inspection Manufacturing and process control Scope of delivery: Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures. Condition: Used Optical condition according to the pictures PC system and existing QVPAK software start. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures. Important note: The machine has not been tested because it is in a protection mode after being moved. This is also intended by the manufacturer during machine transport. The machine must be put back into operation by qualified Mitutoyo personnel. Shipping by freight forwarder is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Chsdpfxszrfpxo Ac Tjb Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,500 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Machine construction: Welded steel frame; bending system: Wedge drive; crowning: Included, adjustable via machine control • Manipulation and positioning • 2-axis part manipulator with suction cups (X travel 2,653 mm; stroke 100 mm; 12 suction modules) • 5-axis rear stop; rotary manipulator; front stop; loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop speed: 3,000 mm/s • Part manipulator speed: 3,000 mm/s • Rotary manipulator speed: up to 3 rev/s • ToolMaster Bend speed: 2,400 mm/s • Positioning accuracy • Y-axis: 0.10 mm; X-axis: 0.05 mm; R-axis: 0.05 mm • CNC control • 21.5-inch touchscreen; OS: Windows 7 Ultimate 64-bit • Keyboard and mouse; USB; RJ45 network; Ethernet 10/100 Mbit/s • Internet teleservice / remote diagnostics • Bend angle measurement • Optical bend-angle assistance; integrated camera; graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety equipment • CE certification; rotating safety doors; safety light barriers; working-area access protection • Foot switch with enable function; emergency stop • Electrical data: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation/feeding/transfer; automatic finished-part unloading • Belt conveyor for finished parts; max blank size 3,048 x 1,500 mm • Storage interface included • Loading trolley: Not included; Rail set: Not included • Tooling and tool systems • ToolMaster Bend: Automatic hold-down tool positioning and setup; automatic positioning of standard, Pick&Place, and curved holders • Included tooling: 16 standard hold-down tools (160 mm each); 6 Pick&Place hold-down tools; Pick&Place segments 10/15/20/40 mm; corner hold-down tool (199 mm); OBW90 and UBW90 bending tools • ENW equipment: ENW function for tilting hold-down tools; ENW110-40 tool (length 3,123 mm; depth 40 mm); min bending width with ENW tools 40 mm Chsdpfjzvdc Ssx Ac Teb • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules; 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Software and data capture • TecZone Fold floating license: automatic programming from 2D/3D data, automatic bending program generation, 3D simulation, collision checking, manual modification • Wireless 2D code reader with Bluetooth: barcode and DataMatrix reading; automatic production program loading

Condition: used, Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, OPS Ingersoll OPS 550 – HSC Milling Machine (Year of Manufacture 2007) with Tool Changer & Extraction System Manufacturer: OPS Ingersoll Funkenerosion GmbH Model: OPS 550 Year of Manufacture: 2007 Machine No.: 655029 Made in Germany The OPS Ingersoll OPS 550 is a precise and powerful high-speed milling machine (HSC) designed to meet the highest demands in toolmaking, mold making, and precision component manufacturing. Featuring an integrated tool changer, a high-performance extraction system, and a user-friendly control unit, it provides optimal conditions for efficient and highly precise work. Equipment & Features Integrated tool changer with multiple tool positions Extraction system for clean operation Chjdpew I Sm Dsfx Ac Tjb OPS control unit with screen, keyboard, and emergency stop Precise HSC machining for fine contours and complex shapes Robust machine construction for lasting precision Technical Specifications Power supply: 400 V, 3-phase, 50 Hz Control voltage: 24 V DC Rated current: 63 A Power consumption: 55 A Year of manufacture: 2007 Errors, typographical mistakes and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 710 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 210 mm, spindle speed (max.): 20,000 rpm, number of axes: 3, This 3-axis ISEL FlatCom M30 DoppelFlat 75-35 was manufactured in 2016. It features a complete sound-insulated safety enclosure with sliding viewing doors and a swivel-mounted CNC control console. The machine is equipped with a top-mounted multi-port suction hood and integrated pneumatic pressure regulators. If you are looking to get high-quality milling capabilities, consider the ISEL FlatCom M30 DoppelFlat 75-35 gantry milling machine we have for sale. Contact us for further details. • Machine Type: CNC Gantry Milling (Double Flat / Twin Table Station) • Enclosure: Complete sound-insulated safety enclosure with sliding viewing doors • Control Unit: Swivel-mounted CNC control console with monitor, keyboard, touchpad, status indicator lights, and key switch • Operator Controls: Standalone two-hand safety control pedestal equipped with palm switches and emergency stop button • Extraction System: Top-mounted multi-port suction hoods with 4 flexible extraction hoses • Cooling & Climate Control: Cabinet-mounted enclosure air conditioning/cooling units • Pneumatic System: Integrated pneumatic pressure regulators, air filtration assembly, manifold block, and coiled hose connection • Safety Equipment: Red/Green signal tower light mounted on the frame Chsdpfezu Rtusx Ac Tsb