Used Jig Grinding for sale (4,232)

Condition: used, Year of construction: 2000, centre distance 1000 mm grinding length 1000 mm centre height 300 mm Control Siemens 840 800 kg weight of the machine ca. 6,7 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Hedpfx Aeynbi Ijcvjk if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Hjdpfxoxc Nyve Acvjk Subject to prior sale!

Condition: good (used), Year of construction: 1988, JUNG JF 415 E Machine type: Surface grinding machine Year of manufacture: 1988 Working area Grinding length (X): approx. 400 mm Grinding width (Y): approx. 150 mm Max. workpiece height: approx. 240–400 mm Hedeyx S R Sjpfx Acvjk Magnetic chuck: 400 × 150 mm Grinding spindle / Tool Grinding wheel: approx. Ø 225 mm, width 16–25 mm Spindle power: approx. 2 – 4 kW Speed: up to approx. 4,500 rpm Feeds / Movements Longitudinal feed: approx. 1 – 20 m/min (hydraulic) Cross travel: approx. 150 mm Infeed: automatic Connection / Power Mains connection: 380–400 V / 50 Hz Total power: approx. 4–4.5 kVA Dimensions / Weight Machine weight: approx. 1,300 – 2,250 kg Dimensions: approx. 2,200–2,500 × 1,300–2,100 × 1,500–1,900 mm

Condition: used, Technical Data Manufacturer: Technica Model: 5100 Hedoyw Rr Eopfx Acvek Design: Centre grinding machine with vertical construction Workpiece holding: Between centres with tailstock and guide Grinding spindle: High-speed grinding spindle Equipment: Various grinding wheels and live centres included Maximum workpiece length: 1100 mm Minimum workpiece length: 50 mm Maximum workpiece diameter: 125 mm Minimum workpiece diameter: 8 mm Centre height above guide: 145 mm Centre height above carriage: 65 mm Centre hole taper angle: 60° Maximum centre hole diameter: 50 mm Minimum core hole diameter: 2 mm Weight: 460 kg Dimensions: 850 x 750 x 1850 mm Condition: Used, good No guarantee is given for the correctness, completeness, and up-to-dateness of the information provided.

Condition: used, Year of construction: 1989, band width 150 mm band length 3500 mm Hsdpoyw Tkkofx Acvsk band speed 30 m/sec Scheiben-Ø 400 mm grinding feed 0 - 5 m/min work piece revolutions 0 - 140 U/min power capacity - workpiece power 2,2 kW grinding diameter 100 - 600 mm clamping length 6000 mm bed length ca. 8000 mm voltage 380 V / 50 Hz motor speeds: 1450 U/min power capacity 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 8,6 x 2,6 x 2,5 m

Condition: like new (used), Machine come with lot of additional equipement. Hjdpfxohvr Hbo Acvsk

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path and the grinding wheel width. Hedpou Hiq Rofx Acvjk Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data

Condition: good (used), Machine is in good working condition. Hjdpfjwu Exnex Acvek

Condition: good (used), Year of construction: 2000, Machine is in good working condition. Hjdorh Ipajpfx Acvsk Magnet 600 mm

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Hjdpfjuwp Epjx Acvok Parts shown by hand not come. Technical data are in documents .

Condition: good (used), Machine is in good condition with equipment. Hedpfx Acjwu Ey Ejvek

Condition: good (used), Year of construction: 1984, Machine is in good working codition. Hjdjxvikuepfx Acvsk

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder, tool grinding machine -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: Ø 300 mm -Operating voltage: 380 volts Hodpfxjd Dfhwj Acvsk -Dimensions: 1080/480/H1240 mm -Weight: 252 kg

Condition: good (used), Year of construction: 2000, Universal Cylindrical Grinding Machine Studer S30 leanPRO Studer S 30 Year of manufacture: 2000 Operating hours counter Regular maintenance intervals by manufacturer (last service 11/25, report available) Wheel change: according to manufacturer intervals Hydraulic inspection: annual check Backup battery replacement: included in Studer maintenance Control system: FANUC 16 T Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 125 mm Distance between centers: 650 mm Optional grinding cycles for increased center height Table adjustment: 11° Glass scale on X / Z axis Paper band filter unit Workpiece headstock: approx. 1-1,000 rpm Internal grinding attachment with accessories LED spotlight with flexible arm Grinding wheel: 400x80 mm Frequency converter for external grinding spindle Hsdpfx Aoyx Hgzjcvsk Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Workpiece support with live center and MK 4 Workpiece headstock: MK 5 taper Tailstock: MK 3 taper Quill stroke: 40 mm Machine weight: approx. 3,400 kg Installation dimensions (LxW): 2,300x1,550 mm Machine height: approx. 2,000 mm Electrical supply Digital linear measurement system Coolant supply with fleece filter, tank capacity 300L Operating hours counter, control ON: 35,978 h

Condition: ready for operation (used), Year of construction: 1977, Immediately available due to business closure: Reform Hydraulic Knife Grinding Machine Type AR 40 Type 40 Year of manufacture: 1977 Grinding length: 1000 mm Grinding head: 400 mm diameter Swivelling magnet: 1000 x 150 mm Coolant system Grinding motor: 4 kW Weight: 2 tons Hedpfxoyyktzs Acvok Offered at a price of EUR 3,250—plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex location: Reform Knife Grinding Machine Type AR 18 Model 4 Year of manufacture: 1979 Grinding length: 1800 mm Hjdpfx Aceyyktusvek Grinding width: 400 mm Drive: 4.5 kW Magnet: 1800 x 400 mm, swiveling Weight: 4 t Coolant system Price: EUR 5,500.— plus VAT, ex location.

Condition: good (used), Cup wheel diameter: 175 mm Table clamping surface: 150 x 250 mm Max. installation height without/with magnetic chuck: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Hodpfxsyvfq Es Acvsk Drive motor: 380 V, 1.5 kW Required space approx.: 800 x 600 x 1600 mm Weight approx.: 200 kg

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Hedpfx Aoym Tuajcvok Technical Details: grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC angle approach cylindrical grinder Technical Details: diameter 250 x 800mm, VM24 grinding wheel balancing system, MARPOSS InProcess measuring unit, CNC SIEMENS SINUMERIK 840D Hodpfx Acjym Tcwjvok

Condition: used, Year of construction: 2000, Lot consists of: (1) Crankshaft machining unit Technical details: Hjdpfjym Tbgjx Acvek Crankshaft machining unit, 400V 50Hz 12.5kVA 18A, CNC SIEMENS SINUMERIK 840D

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC grinder Technical details: center height 180 mm, working range Ø 200 x 600 mm, one grinding slide / travel 150 mm, CNC SIEMENS SINUMERIK 840D, dimensions (LxWxH) approx. 3 x 2 x 2 m, weight approx. 6.5 t. Hodpfsym S S Dsx Acvjk

Condition: used, Year of construction: 2004, Lot consists of: Hedsym Syhopfx Acvek (1) CNC main bearing grinder Technical Details: Crankshaft length 630 mm x diameter 180 mm, 2 grinding spindles (grinding wheel diameter 400 mm), MARPOSS E82 in-process grinding wheel balancing system, CNC LANDIS 6400, weight approx. 16 tons

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC con-rod bearing grinder. Technical details: crankshaft length 600 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 in-process grinding wheel balancing system, CNC LANDIS 6400, weight approx. 16t. Hedpfx Aoym Spiscvjk

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, spindle speed (max.): 10,000 rpm, type of input current: three-phase, grinding wheel diameter: 250 mm, overall weight: 8,100 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 20 m/min, travel distance X-axis: 380 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 280 mm, grinding spindle motor power: 15,000 W, table length: 500 mm, table width: 330 mm, input voltage: 400 V, CNC Tool grinding machine SCHNEEBERGER Gemini DMR TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC 31i B5 Software installed: Quinto Qg1 Colour touchscreen: Yes Number of axes: 5 Stroke X axis: 380 [mm] Max. Stroke speed X axis: 20000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Y axis: 300 [mm] Max. Stroke speed Y axis: 5000 [mm/min] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 280 [mm] Max. Stroke speed Z axis: 20000 [mm/min] Resolution Z axis: 0.0001 [mm] Table length: 500 [mm] Table width: 330 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10000 [rpm] Grinding spindle motor power: 15 [kW] Max. diameter grinding wheel: 250 [mm] Weight: 8100 [Kg] INCLUDED EQUIPMENT: x1 grinding wheel changer with 8 positions x1 FANUC 6-axis robot, type LR Mate 200iC 5L x3 HEIDENHAIN linear glass scales on all X, Y, and Z axes Machine visible under power in our premises by appointment. Price on request, loading on truck included. Hjdpfx Ajywzayscvek Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools such as milling cutters, taps, and drills. Machine comparable to brands such as Blohm, Elb, Ewag, Favretto, Fenix, GER, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, and Walter. Also consider cylindrical or surface grinding machines, lathes, machining centers, and milling machines.

Condition: good (used), Please read the technical specifications carefully. If the machine is a potential investment for you, we kindly ask that you provide full identification with a correct telephone number and email address before we can issue an offer. LOG-O-MATIC (Mainaschaff/Germany) Surface Grinding Machine FS 5030 AH Hsdpfx Acexz R Niovsk Year of manufacture: 4/1991 Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal, cross, and vertical feed Accessories/Features: - Electromagnetic chuck approx. 500 x 300 mm - Manual wheel dresser on the carrier - Paper band filter - Coolant system - Machine lamp - Machine feet Additional accessories: - Side-, angle-, and radius dressing device - Balancing scale - Demagnetizing plate The machine is in very good condition and comes from a training facility. Available from March 2026.