Used Ixion Maxion for sale (40)

Condition: good (used), Year of construction: 2003, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm Iedpfok Tuwvox Ag Usht -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V -Dimensions: 620/235/H800 mm -Weight: 70kg

Condition: used, Column drilling machine IXION - MAXION type Unimax 3 serial no. 201516 year of construction 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill throat 260 mm Quill stroke 125 mm Table size 360 x 500 mm Column diameter 110 mm Spindle speed 80 - 3200 rpm infinitely variable Ijdpsrz Tuwjfx Ag Usht Motor power 0.8 / 1.5 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive - Motor speed level 1 for clockwise and counter-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed - Drill table height adjustment via hand crank - RÖHM quick-action drill chuck Ø 1 - 16 mm - Emergency stop button Space requirement L x W x H 800 x 530 x 1800 mm Weight 230 kg Very good condition

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm Ihsdpfju Aq Amox Ag Uot - Pneumatic feed unit PV 12 - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: good (used), Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm Ihsdpfx Agjur H Ehj Uet - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 Iedpsu Aqz Asfx Ag Usht - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: used, Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm Ihjdpfsut Uzaex Ag Uet - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 3 - 16 mm max. 1500 mm Ihodpfohmribjx Ag Uet weight 300 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine -Spindle mount: B10 -Table size: 770 x 300 mm -max. intermediate dimension: mm -Protrusion: 200 mm -Speeds: 250-4000/365-4150 rpm -Spindle stroke: 100 mm -Dimensions: 960/970/H1600 mm -Weight: 512 kg Iedpob D I Dtsfx Ag Ujht

Condition: used, total height: 1,600 mm, total length: 1,250 mm, total width: 800 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Documentation available: No - CE certificate present: No - Serial number: 132832 Ijdpfx Aowywwyeg Ueht - Motor power: 0.6kW - Spindle speed max.: 1600rpm - Model: omboormachine - Table width: 225mm - Table length: 290mm - Spindle speed min.: 320rpm - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2008, IXION TL 1001 CNC Deep Hole Drilling Machine with Equipment Year of manufacture: 2008 Control system: MITSUBISHI M530 Machine number: 950521 Drilling depth (Z), CNC controlled: 1,000 mm Drilling unit (Y), vertically traversable: 800 mm Table size: 1,200 mm x 700 mm Table load: 3,000 kg Table longitudinal travel (X): 1,000 mm Table displacement (W): 1,000 mm Table rotatable by 360° Spindle: SK 40 Spindle speed: 100 – 4,000 rpm Max. drilling capacity in steel: 25 mm Max. thread cutting in steel: M20 Milling in steel possible Weight: approx. 3,500 kg Equipment: Compact belt filter KBF Electronic handwheel Coolant system Chip conveyor KBF 270 P50 Included in delivery: Ihjdpsx Tdwaofx Ag Uot Deep hole drilling tools Workplace with: Holders / mounting brackets / supports / sealing discs Operating manual/documentation Machine parameters on storage medium For equipment, technical data, installation & transport – see PDF. Image, content, and details are provided without guarantee and therefore not binding. All additional accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery includes only the accessories explicitly listed here, in the order confirmation and invoice. FCA (Free Carrier, loaded on truck) D-04643 Geithain packaging only Lead time: immediately Subject to prior sale / Payment due immediately upon purchase

Condition: excellent (used), Year of construction: 2000, Column drilling machine Fabr.IXION Type: BS 30 Year of manufacture: approx. 2000 Spindle holder :MK 3 spindle speed : 160-2800 rpm spindle stroke : 150 mm Drilling capacity in steel : 30 mm Table: 550 mm X 400 mm Ihjdpfxotwnv Ts Ag Uot With machine vice jaw width 110 mm , drill chuck Röhm 1-13 mm Machine has worked little has only drilled wood . Dimensions: 90 cm X 55 cm X 190 cm Weight: approx. 300 kg.

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Constants need to be reset by a technician, and the backup battery needs to be replaced. New LCD display was recently installed. New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel paths Ijdsh Dpv Rspfx Ag Uoht + Quill Tl 601 (Z) 600 mm + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Condition: repair required (used), Year of construction: 1991, functionality: limited functionality, machine/vehicle number: 950082, drilling depth: 1,000 mm, travel distance X-axis: 1,500 mm, type of input current: three-phase, This machine is equipped with a Bosch CC100 M control system and has a defect. All motors and the drive are in working condition. The machine can be used for retrofit or as a source of spare parts. Ihjdpfxjx Afbps Ag Uet

Condition: used, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 170 mm 4 speeds 70 - 1400 U/min table-size 600 x 450 mm Ihodpfxsvvnlno Ag Ust total power requirement 3,0 kW weight 350 kg dimensions 1200 x 800 x 2150 mm Features: - Automatic feed - Coolant device - Infinitely variable speed control - Adjustable fixed depth stop - Drill chuck

Condition: ready for operation (used), Ixion BS 23 STG with thread cutting device Ihsdjxvzw Tspfx Ag Ust

Condition: excellent (used), Drilling capacity -16mm Ihodpoq Dlznefx Ag Uet MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Misc. Accessories Marcels Maschinen AG

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Ihsdpfx Agswk Nxqs Ujt Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: used, Used pillar drilling machine from Ixion Isdpfohcr I Esx Ag Usht speed range 400-3000 rpm Mk2 holder drilling capacity up to max. 18mm

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, Machining Center - Vertical IXION model BAZ 325 year of manufacture 2001 type of control Heidenhain TNC 426 x-travel 600 mm y-travel 400 mm z-travel 650 mm tool magazine 12 pcs table surface area 800x400 mm tool taper SK40 spindle turning speed range 40- 7000 U/min weight of the machine ca. 4 t Ihedpexl Syqefx Ag Ujt Z-axe error - needs to be repaired - for parts No tools, no air extractor Offers wanted

Condition: used, sehr schöne Tischbohrmaschine von IXION BST 13 very nice Drilling machine IXION BST 13 Tischbohrmaschine / Drilling machine IXION BST 13 Baujahr / Year 1971 - Serial-No. 37919 Abmessungen / Dimensions 220 x 400 x 820mm Gewicht / Weight 50kgs Iodpfx Aexp H Dxog Ujht Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, bore capacity in steel (diameter) 32.0 mm bore capacity in cast iron 36.0 mm throat 280 mm bore stroke 150 mm turning speeds 80 - 1400 U/min table-size 400 x 550 mm morse taper MK 3 feed 0.1-0.2-0.3 mm/U total power requirement 1.1 / 2.0 kW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 1900 mm Furnishing : - Column drilling machine - Drive: V-belt - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank Ihodpfsxabv Dsx Ag Uet - machined base plate with T-slots - adjustable drilling depth stop - Connection cable + 16A plug * Machine link: ?machineno=1008-9103736

Condition: used, Year of construction: 2001, drilling diameter 18 min drilling capacity diameter max. 15 mm bore depth 90 mm throat 215 mm spindle bis 360 mm spindle 560 mm Ihjdpfoxbtrajx Ag Uet table plate 350 x 290 mm column diameter 75 mm Total height max. 1050 mm weight ca. 100 kg spindle turning speed - stepless 100 - 1800 U/min motor speeds: 700 / 1400 U/min Pole-changing motor

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,900 mm, total width: 600 mm, total length: 900 mm, table width: 400 mm, table length: 550 mm, overall weight: 360 kg, spindle stroke: 150 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 160 rpm, input voltage: 380 V, Equipment: rotational speed infinitely variable, type plate available, 3-phase 380V, 2-speed motor is running fine. Stepless speed adjustment thanks to variomatic spindle drive. Spindle RPM adjustable from 160 up to 2800. Ihjdowy Ec Djpfx Ag Uet MT3 spindle taper. Albrecht 1-13mm drill chuck included. Chuck eject tool included. Drilling depth adjustable. Maximum drilling depth: 150mm Table size: 550x400mm Table height adjustable. Weight: 360KG Overall dimensions: 90x60x190cm Made in Germany Overall good condition. Contact us for shipping possibilities! € 2,350.00

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 23 mm throat 270 mm bore stroke 110 mm taper MK 3 MK table-size 400 x 385 mm feeds mm/U turning speeds 135 - 825 U/min total power requirement 0,9 KW Ijdpfx Agstqy Ngo Ueht weight of the machine ca. 0,25 t dimensions 1,2 x 0,8 x 2,0 m

Condition: used, bore capacity in steel (diameter) 13 mm throat 180 mm bore stroke 70 mm morse taper 3 MK table: 215 x 215 mm turning speeds 240 - 4000 U/min Ihedpfswpltuex Ag Uot engine output 0,7 kW column diameter 65 mm dimensions 650 x 250 x 800 mm weight 50 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.