Used Ice Machine for sale (115,680)

Condition: used, Packaging machine, strapping tool, and automatic strapping machine ORGAPACK Type CT 2650 Strapping machine for plastic strapping Automatic strapping machine, automatic strapping machine for PP strapping Machine No. 1624, built approx. 2010 Table size: 930 x 470 mm Working height: 700 to 800 mm Maximum frame width: 930 mm Maximum frame height: 700 mm Package width: max. 900 mm Package height: max. 680 mm Package width: min. 80 mm Package height: min. 30 mm Strap width: max. 12 mm (installed is 12 x 0.55 mm) Tension force: 10 to 500 N Coil width: 180 mm Power supply: 400 volts, 50 Hz. - Fully automatic strapping machine for PP plastic packaging strapping (polypropylene packaging strapping) - Sealing unit with heat-welded seal (heat wedge seal) - Continuously adjustable strap tension via electric slip clutch - Electric foot switch - Strap dispenser fixed to the side of the machine Fjdpfx Adsukxwme Njgi - Stainless steel table with steel rollers - Mobile on casters - Operating instructions - Included is a roll of plastic packaging strapping 12 x 0.55 mm, Ø 400 mm (black) Function: The strap is located in the outer frame. The strap is automatically wrapped around the object to be packaged (carton) and inserted into the clamping point. The tensioning mechanism is electrically triggered. Once the tension is reached, the strap is welded and separated. The strap then immediately re-runs automatically through the outer frame. Dimensions L x W x H: 1540 x 520 x 1630 mm Weight: 160 kg Good condition

Condition: repair required (used), pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulics defective Fododpvwijpfx Ad Njgi -Jaw width: 160 mm -Jaw height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm -Weight: 55 kg

Condition: used, jaw width: 160 mm jaw height: 55 mm span width: 310 mm Fgodpsbt Sd Dofx Ad Nei span power: 5000 kg total height: 170 mm

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, For cutting uniform cubes, strips and slices from various products, such as potatoes, vegetables (carrots, celery, etc.) and fruit. Fgjdpfx Asxbcr Aed Nsi

Condition: ready for operation (used), ZEISS Rondcom 54 Form Measuring Instrument – Surface and Contour Measuring Device Max. Measuring Diameter (OD): approx. 300 mm Max. Workpiece Diameter: approx. 580 mm (depending on configuration) Max. Workpiece Load: approx. 30 kg Rotational Axis (C-axis) – Radial Roundness: 0.020 + 6 H / 10,000 µm (tolerance) Axial Runout: 0.020 + 4 R / 10,000 µm Measuring Speed (Rotation): approx. 2 – 10 rpm Centering Range: ± 2 mm Leveling / Tilting Range: ± 1° Resolution (Rotary Axis): 0.025° Z-Axis (Vertical Travel): 300 mm (optionally expandable to 500 mm) Straightness Deviation Z-Axis: 0.12 µm / 100 mm, 0.20 µm / 300 mm Parallelism Deviation (relative to rotary axis): 0.8 µm / 300 mm R-Axis (Radial Movement) – Travel: 170 mm Straightness Deviation R-Axis: 0.8 µm / 150 mm Parallelism Deviation (C vs. R): 1 µm / 150 mm Linear Scale (on R-Axis): Yes, available as standard (for higher accuracy) Measuring Force (stylus / probe): adjustable, 30 – 100 mN Measuring Range (probe): ± 1000 µm (adjustable) Detector Resolution: up to 0.001 µm (1 nm) Standard Stylus: Length L = 54 mm, Ball Ø = 1.6 mm carbide Fodpfsxhd E Dex Ad Negi Power Supply: 100 – 240 V AC, 50/60 Hz Power Consumption: approx. 600 VA Compressed Air Requirement: 0.3 – 0.7 MPa Weight (approx.): approx. 170 kg You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. Export customers can be issued a net invoice, provided a valid VAT ID number is supplied. Sale subject to prior sale. Visit our shop to view our other offers as well. All company names and trademarks are property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in item descriptions are subject to change.

Condition: excellent (used), Machine vice, mechanical.jaw width, approx.: 200 mmspan width, approx.: 425 mmDimensions LxWxH, approx.: 630 x 300 x 165 mmWeight, approx.: 75 kgArt. 0320275 Fgedped Ttd Rofx Ad Nji

Condition: used, Year of construction: 2010, machine/vehicle number: 25064, Item No. 25064 Fsdpfjwhbzlox Ad Nsgi Technical Specifications: - Jaw width 200 mm - Jaw height 63 mm - Maximum clamping range 280 mm - Total height 150 mm - Maximum clamping force 6200 daN - Clamping range adjustment with Camlock system - Weight 78 kg - Minimum space requirement L 695 x W 200 x H 150 mm - Hand crank

Condition: good (used), 3 machine vices Goody. Fedpfx Adjrai Aks Njgi

Condition: good (used), machine/vehicle number: 17 10(5), Jaw width: 125 mm Jaw height: 45 mm Clamping width: 220 mm Overall height: 145 mm Space requirement: total length max. 683 mm Weight: 45 kg Fgjdpfxsl Ra Uxs Ad Nji

Condition: used, Tool presetting device SOMET type SPS 500 U Machine no.: S1 Year of construction: 1987 Table surface: 545 x 1000 mm Travel paths: X = 500 mm, Y = 340 mm Width in portal: 550 mm Height table to portal underside: 250 mm - Longitudinal portal guide right and left on the table Fgsdpfx Aodzqrtsd Noi - Adjustment via very fine threaded spindles with handwheel - Quick adjustment by electric release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 clamping fixtures for tool measurement - On base with shelf and drawer Required space (L x W x H): 1100 x 700 x 1650 mm Weight: 560 kg Good condition

Condition: ready for operation (used), GehoTM 800 D Film Sealing Machine / Foil Sealer Foot Pedal Operation Seam Length: 820 mm Seam Width: 3 mm With integrated cutting device You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided that a valid VAT ID number is available. Subject to prior sale. Fjdjxfh D Eepfx Ad Negi Visit our shop and browse our additional offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and product description purposes. Technical specifications and item descriptions may be subject to errors or deviations. We reserve the right to make changes.

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Fgsdpfx Aev N Uyrsd Nsi Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm - Height-adjustable protective cover - Automatic spindle sleeve feed - Lifting motor for milling head - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame

Condition: good (used), Year of construction: 2023, functionality: fully functional, The machine is in good condition and has been professionally and carefully maintained. Graco airless unit, type Merkur ES with spray gun Including various nozzles Further information available by email or phone. Private sale, therefore no return, no warranty and no guarantee. Sale is made with exclusion of any liability. No shipping Fodpfjxgn Uasx Ad Nsgi

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle Fgsdpfod N E Rvjx Ad Nsi 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

Condition: ready for operation (used), Herrmann HIQ Dialog 1200 SpeedControl Ultrasonic Welding Machine Generator rated power: 1200W Operating hours: 8704 h Ultrasonic active operating hours: 3 h Weldings performed: 61680 Year of manufacture: 2010 Fjdpfxewcb Dij Ad Nsgi Cylinder diameter: 32mm Piston rod diameter: 12mm Cylinder stroke: 100mm You are welcome to visit us for a viewing. We can arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Jaw width, approx.: 200 mmClamping width, approx.: 365 mmDimensions LxWxH, approx.: 630 x 300 x 165 mmWeight, approx.: 75 kgArt. 0320276 Fjdpfxofbaq He Ad Njgi

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius Fsdpfx Ajwhf Hfed Negi 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Hydraulic machine vise ARNO Jaw width: 200 mm Jaw height: 60 mm Fgsdpod Amwiefx Ad Nei Clamping force: 8 ton. Clamping range: 0 to 370 mm Opening: max 373 mm Guide rail height: 140 mm -2 socket pins adjustable clamping ranges -Swivel base Dimensions L x W x H: 900 x 400 x 210 mm Weight: 125 kg good condition

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Fgodsdzqccspfx Ad Nsi Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition

Condition: used, Straightening machine, strip straightening device with adjustable LENZE geared motor Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a classical straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, stepless Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Fgododzp U Aepfx Ad Nsi Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz - Pull roller pair, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit not driven) - On a sturdy metal base - Straightening machine was used for cardboard approx. 350 x 1.5 mm Space requirement (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: used, TIG welding machine, electric welder KESTRA type WIG 350 AC/DC E-welding machine Serial No. Year of manufacture approx. 1985 Output: 350 amps = 60% duty cycle Adjustment range: 3 stages and fine adjustment Current type: AC / DC Power connection: 400 V, 50 Hz, 32 A plug - 4-metre hose package with TIG torch - 2-stroke / 4-stroke welding function - Water-cooled - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg Fjdjdzql Sepfx Ad Nogi The welding test shows good results when welding stainless steel with DC and good results when welding aluminium with AC. The HF ignition does not work, the arc can be started via brief contact.

Condition: used, Mechanical pull-down NC machine vice FRIBOSA type size B Precision machine vice, grinding vice, clamp Jaw width 100 mm Jaw height 34 mm Clamping width 0 to 130 mm guideway height 40 mm guideway length 270 mm - mechanical machine vice - Clamping range via trapezoidal spindle - Stable base body ground on all sides Fgsdpfoilx Ufex Ad Nsi - Can be clamped horizontally, vertically or laterally Dimension L x W x H 310 x 100 x 77 mm weight: 10 kg good condition

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Fgodpfx Adsdzqace Nei Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Current type: DC and AC (AC-DC) Mains connection 380 Volt, 50 Hz - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment - Digital ampere display - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition Fgodpodzqa Hofx Ad Nji

Condition: used, TRIGO Type SCS 120-250 Mechanical NC Machine Vice Precision machine vice, clamp Jaw width 120 mm Fgsdpfjwki Avsx Ad Nji Jaw height 20 / 55 mm Clamping width 0 to 190 mm Clamping range with 55 mm jaw height approx. 0 to 40 and 32 to 88 mm Clamping range with 20 mm jaw height approx. 89 to 138 and 132 to 190 mm Clamping pressure approx. 4 tons Top jaw guide groove 20 mm Guideway height 80 mm Height with base jaws 100 mm Bed length 250 mm - Mechanical precision machine vise - 1 fixed jaw mount with 2 mounting positions (50 mm spacing) - 1 movable jaw mount with approx. 55 mm adjustment - Adjustment via trapezoidal spindle with 14 mm hexagon drive (Allen key) - Special grip reversible jaws with 3 mm grip step on both sides, pointed design, for soft materials, type 87.120 - Sturdy base body, ground on all sides - Can be clamped horizontally, vertically, or laterally - Guideway with 18 mm guide groove, 6x M12, hole pattern 100/100 x 80 mm Dimensions L x W x H 260 x 120 x 155 mm Weight: 22.5 kg good condition