Used Hydraulic Power Pack for sale (52,529)

Condition: used, Year of construction: 2006, Overview This Tempo-Pack SATURN is a rotary stretch wrapper for pallet loads, built in 2006 and supplied as a complete end-of-line system: infeed roller conveyors, a top-sheet dispenser, the wrapping station and outfeed conveyors with a 90° turn in an L-shaped layout. It was designed for cartons on Euro and half pallets at an output of 60 pallets per hour. The film carriage rotates around the stationary pallet, so the load is not turned during wrapping. Technical data - Manufacturer: Tempo-Pack - Model: SATURN - Year of manufacture: 2006 - Output: 60 pallets per hour - Product: cartons on pallets - Pallet formats: 1,200 x 800 mm (Euro pallet), 800 x 600 mm (half pallet) - Maximum load footprint: 1,300 x 1,100 mm - Maximum load height including pallet: 1,800 mm - Maximum load weight: 1,500 kg - Conveyor height: 150 mm - Stretch film height: 500 mm - Top-sheet film width: 1,400 mm - Power supply: 3 x 400/230 V, 50 Hz, N, PE; 32 A - Compressed air: 6 bar - Machine height: 2,910 mm; minimum hall height 2,900 mm in the wrapper area - Layout footprint: approx. 13,590 x 6,750 mm Equipment Credpfxe Ahgtio Aqvei - Rotary stretch wrapper with film carriage - Top-sheet dispenser ahead of the wrapper - Powered roller conveyors on infeed and outfeed, with a 90° transfer to the outfeed line - Control cabinet with touch panel operator interface - Safety fencing with access door - Layout drawing available Condition Used, functional and ready for operation. Viewing on site is possible by appointment. Availability Available immediately. Location: Germany.

Condition: used, Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks Crjdped E Tfpsfx Aqvsi -Beeks: hard -Chuck size: Ø 250 mm -Short taper mount for: bayonet disc -Short taper mount: Ø 139.719 mm -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 44 kg

Condition: used, Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: ELCO -Type: HMC-1B 5V10A -Number: 1x control cards available -Price: per piece -Dimensions: 250/135/H60 mm -Weight: 1.3 kg Crsdpfx Ajcpnl Noqvsi

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic test pump Crsdpec Skt Ejfx Aqvei -Hydraulic unit for: Power chuck -Hydraulic pump type: B1A8E -Pump max. pressure: 80 bar -Pump max. flow rate: 12 l/min -1x Drive: 1.1 kW 1400 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 500/410/H670 mm -Weight: 100 kg

Condition: used, Hydraulic power unit, KOSMEK hydraulic unit Pneumatic pressure converter Type: PL 087 Operating pressure: 100 bar Flow rate: 1 liter/min Tank capacity: approx. 4.5 liters - pneumatic drive - hydraulic connection Space requirement L x W x H: 250 x 140 x 290 mm Weight: 16 kg Cjdpfx Aqezpbqtjvsri in good condition

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 40 bar -Liter flow rate: 15 l/min -Drive: 0.55 kW 1400 rpm -Hydraulic tank -Foot switch Cedpfx Aob A Hdqsqvjri -Weight: 100 kg

Condition: used, Technical data: - Pressure: 100 bar - Capacity: 2 L Crsdpfx Aqezrxunsvji - Motor: 0.75 kW

Condition: used, Technical data: Cjdpfx Aqszrxuhevori - Working pressure: 70 bar - Motor: 1.5 kW

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg Csdpfjdq Nftex Aqvsri

Condition: used, Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact power supply Quint Power -Type: Quint-PS-3x400-500AC/24DC/10 -Order No.: 2938617 Credpenbhluofx Aqvoi -Dimension: 130/85/H130 mm -Weight: 1.1 kg

Condition: ready for operation (used), functionality: fully functional, The Tecma Pack FM1200p box erector automates the process of forming flat-folded cardboard blanks into tray-style boxes. It forms and then glues the flaps to create regular tray boxes, ready to receive products. A tray box is essentially a cardboard tray with raised side walls. This design facilitates the loading of products while providing good support during handling, storage, and transportation. This format is particularly suitable for packaged food products, trays, pouches, and items intended for quick shelf placement. Tray boxes are among the common formats produced by industrial box erectors and tray formers. Forming and hot melt gluing First, the operator loads the cardboard blanks into the machine's magazine. Then, the FM1200P takes each blank and performs the various folds. Next, it forms the side walls and applies hot melt adhesive to the designated areas. Finally, the machine discharges a formed and glued box to the next station. As a result, it provides packaging that is ready for manual or automatic filling. This process improves the consistency of the boxes and significantly reduces manual operations at the end of the line. Integration into a packaging line The Tecma Pack FM1200P can operate upstream of a loading station, a case packer, or a conveyor. Thus, the formed tray boxes can receive products directly before closing, labeling, or palletizing. Furthermore, its programmable logic controller (PLC) facilitates cycle monitoring. The hot melt gluing system also ensures consistent box assembly. With a stated output of 1,200 boxes per hour, the machine meets the needs of industrial production lines that require a continuous flow. Credpfx Aey Nxnljqvei A clearly identifiable box format Therefore, the FM1200P does not produce a generic cardboard box. It produces a tray box, formed from a flat-folded cardboard blank. A photo of the resulting box should appear in the gallery so that the buyer can immediately understand the format that can be produced. However, the exact format of the box depends on the installed tooling and the dimensions of the blanks used. Therefore, it is advisable to present a photo of a box actually produced by this machine or by its current tooling. Technical specifications: Manufacturer and model: Tecma Pack FM1200P Machine type: automatic tray box erector Product: formed and glued tray box, ready for filling Output: up to 1,200 boxes per hour Gluing system: hot melt Machine power: 2 kW Gluing unit power: 4 kW Pneumatic supply: 6 bar – consumption of 7 m³/h Control: programmable logic controller (PLC) Weight: 1,000 kg Dimensions (L × W × H): 3950 × 1860 × 2250 mm

Condition: used, 4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks Codpfx Aqjfpif Devori -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

Condition: good (used), 4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 200 mm -Type: LK 200 A72-2163-132 -Thread: M20 Credpjv Uwqkefx Aqvji -Bolt circle: Ø 140 x 17 mm -Jaw width: 23 mm -Passage: Ø 32 mm -Dimensions: Ø 200 x 170 mm -Weight: 18.8 kg

Condition: good (used), 4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 160 mm -Thread: M16 -Bolt circle: Ø 133 x 13 mm Cjdpfx Aqsv Tvzlsveri -Dimensions: Ø 160 x 210 mm -Weight: 10.7 kg

Condition: used, 4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 Cjdpef Atqbofx Aqvjri -Weight: 79 kg

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -without: interchangeable jaws Crsdpfx Aqjb A Smwsvsi -Mouth size: Ø 225 mm -Cone: Ø 106 mm -Weight: 28 kg

Condition: used, Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Manufacturer: Sauter HA 1401 86 38 192 -Hydraulic unit: for power chucks -Drive: 0.75 kW 1410 rpm -Volume flow: approx. 11 l/min -Dimensions: 510/300/H750 mm -Weight: 80 kg Crjdod S Nmijpfx Aqvoi

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Crjdpfx Asd R Hrdoqvsi -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 Crodpfx Aqsd Ira Devei -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck Csdpfxeb A Rdzj Aqvsri -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Credpfxod R Exhe Aqvei -Handover: as is -Chuck size: Ø 200 mm -Bolt circle: Ø 134 mm -Weight: 20.7 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Mounting thread: M20 -Gradient: 2.5 mm Crjdpfxed Itcrj Aqvoi -Weight: 32 kg

Condition: good (used), Schon 8 LES hydraulic swing-arm clicker press The machine is in excellent condition and ready for operation. Crjdpfx Aqoz S Uxhjvoi Ideally suited for die-cutting challenging materials; widely used in the leather goods and printing industries. Compatible with both leatherworking and bookbinding/printing dies. Capable of cutting paper, cardboard, leather, plastics, etc. Pressing force: 22 tons Power supply: 380V Table dimensions: 900 mm x 450 mm Head (striking plate) dimensions: 550 mm x 450 mm Maximum stroke: 150 mm Weight: 1200 kg Two-hand control or foot pedal operation. Equipped with an additional safety guard.

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump -Spare part E forklift -Power supply: 24 volts -Power: 2.8 kW -Speed: 1600 rpm -Hydraulic tank Crsdpfxjb A Nabs Aqvji -Weight: 70 kg

Condition: new, Year of construction: 2026, Powered Load Moving Skates with a compact design, low overall height and load capacities of 10, 24, 40, 48 and 80 tonnes. Intelligent Single-Joystick control for all movements. Available in as version with a hydraulic lifting cylinder (+H) or as a DUO or DUO H, with synchronised control of two skate systems. This enables loads to be manoeuvred in a crab steering or round tight bends. The POWER-Skate is the modern way to effectively synchronise or move machinery and equipment in production. Please send us your enquiry. Cedpfx Aogi Dm Hsqvori