Used Hinkel Maschine for sale (1,429)

Condition: ready for operation (used), Tool changer unit, 12 stations, for Manforts RNC 600 E machine, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Fedpfxoz Adm Ds Aivjgh

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Fodpfx Aisznz Ezjvegh Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: ready for operation (used), Spindle with Röhm OVS 130 552-493 full-stroke cylinder for Monforts RNC 600E machine, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Fgsdpsz Ac E Sefx Aivoh

Condition: new, Year of construction: 2026, CNC 1212INDUSTRY 2.0 6kW 1200x1200 milling machine with Becker KVT 3.140 vacuum pump The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1200 x 1200 mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Technical data: Manufacturer: TechnologieCNC Model: 1212 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in free runs: up to 33m/min Fgedpstu H Tujfx Aivoh Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1200x1200x300mm - Hybrid table (vacuum + T-slot) Control: NK-105 G2 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Weight: approx. 650kg Dimensions: For transport - 220 / 190 / 220 Machine assembled and ready to work - 220 / 225 / 230 Standard equipment Hybrid table, i.e. vacuum table enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Central oil lubrication system for trolleys and guides as standard equipment Drive transmission is carried out via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: used, We have a Mercure envelope closing machine available. Can process and close up to C4 envelopes with the flap on the long side. Fgsdpfx Aez Hyvasiveh

Condition: ready for operation (used), INA YRT F-229093 Radial bearing for Supfina machine, the item has been overhauled, used, good condition, 100% working, scope of delivery as per photos Fedpeulqh Hofx Aivogh

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Fodpjx S Etmefx Aivjgh Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Year of construction: 2023, condition: new, GRS 14 Cable Stripper Machine Power:380V/15KW/50HZ Diameter of cable to be processed：φ30mm～φ200mm Stripping Thickness:≤50mm Processing Speed:max.18m/min Net Weight:1200Kg Gross Weight:1350Kg Fgedpfx Aomcbl Ioiveh Machine Dimensions:1620mm*1000mm*1700 mm（L*W*H） Package Dimension:1750mm*1130mm*1900mm（L* W*H）

Condition: ready for operation (used), Deckel Maho 2238-4630 rotary table SN: 0174 for FP4-60 machine – diameter: 63cm / height: 43cm, used, normal signs of wear, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Fsdpfsy Np Najx Aivegh

Year of construction: 2023, condition: new, Cable stripping maschine ,wire stripper Technical Data: Dimensions: W / H / D 75 cm / 68 cm / 86 cm Weight: app. 95 Kg Color: blue / yellow Fodjk Ra Tuopfx Aivsgh Cutting speed: app. 48 Meter per Minute Engine: 230V / 3000 W

Condition: ready for operation (used), Motorized tool holder SK40 / SK50 from Zoller machine 6084 / H4000, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fodpsztmkgsfx Aivjgh

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and production-ready. Ideal for automotive, aerospace, and general metalworking applications requiring precision 3D contour cutting on tubes, hydroformed parts, and complex profiles. Machine at a glance Model: TRUMPF TruLaser Cell 8030 Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed on inspection) Fodpfjukhltex Aivjgh Operating hours: 70,000 h total / 41,125 h beam-on Condition: Fully operational, currently in series production Service history: Annual maintenance exclusively by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Uninterrupted OEM service record – no third-party interventions Our difference: modular handover, not just a machine sale We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 staff, 12 M€ revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose what fits your project: ModuleScope M1 – Ex WorksPick-up at our site, loaded onto your truck. Machine tested before handover.Buyers with own rigging and installation capacity. M2 – DeliveredM1 + international transport, insurance, and unloading at your facility (DAP/DDP on request).Buyers with internal installation team. M3 – Delivered & InstalledM2 + mechanical installation, utility connection, first power-up, laser alignment.Buyers without dedicated installation resources. M4 – TurnkeyM3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol.Buyers who want the machine producing from day one. On-site inspection and sample cuts on your own parts available at our facility in France prior to purchase.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 23.30 E91D-A003, input voltage: 230 V, total length: 125,000 mm, total height: 2,500 mm, total width: 125,000 mm, • Automated sorting and palletizing system with robotics • Robot-assisted sorting, packaging, and palletizing system • Flexible sorting and packaging system with delta and palletizing robots • Automated packaging and palletizing system • Intelligent sorting and palletizing solution with robotic systems • Fully automatic sorting, packaging, and palletizing system Fsdpfjz Df Aajx Aivsgh • Robot-assisted packaging and palletizing system • Automated packaging line with delta robots and palletizing robot • Modular sorting and packaging system for packaging • Highly automated sorting, packaging, and palletizing system Automated sorting and palletizing system with robotics For sale is an automated sorting and palletizing system for processing and packaging various products. The system is equipped with two delta robots for product handling and sorting, an industrial palletizing robot, and a case sealer for automatically closing the packages. After sorting, the products are automatically grouped into packages, case sealed, and then palletized. The system is suitable for high throughput rates and can be adapted to different products and packaging concepts. The modular design allows individual stations to be expanded or integrated into existing production lines. Equipment: • 2 × Delta robots for pick-and-place and sorting • 1 × Industrial palletizing robot • Automatic case sealer • Conveyor technology and system control • Suitable for semi-automatic and fully automatic operation The system is in good condition and can be inspected by arrangement. Further technical information, documentation, and images are available upon request.

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: fully functional, total height: 1,800 mm, total length: 1,000 mm, total width: 1,200 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 6 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 50 mm, We offer this used DIMA (Selective Protective Coating Machine) Hybrid Coating System HC-200, manufactured in 2007. Sale is ex works. Operating hours: 20,000 h, machine is operational. Fjdpoz Ix R Eefx Aivogh If you have any questions or require further information, please send us a message or call us. On-site inspection is welcome. Technical data: Type: HC-200 Selective protective coating machine Dimensions (L x W x H): 1000 x 1200 x 1800 mm (+500 mm for signal light) Stepper motor in combination with encoder, with ball screw and linear guide and spline axis XY speed 0.2 m/s Z-axis speed 0.1 m/s XYZ resolution 0.00625 mm Resolution of the rotary axis 0.036° Rotation 370 degrees Working area (based on a valve on the Z-slide) 600 x 600 mm – Z-movement 50 mm Inline chain conveyor 500 x 600 mm – Z-movement 50 mm Inline belt conveyor with clamping 525 x 600 mm – Z-movement 50 mm Min./Max. conveyor width (chain): 35 mm / 500 mm (manually adjustable) 35 mm / 500 mm (automatically adjustable) Min./Max. conveyor width (belt): 35 mm / 500 mm

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. Fgedpfxsz E S Hhj Aivsh The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.

Condition: new, Year of construction: 2026, machine/vehicle number: YS501X-1, Die Kartonverschließmaschine vom Typ VOGEL YS501X ECONOMIC ist unsere Empfehlung speziell für eher große Kartonformate, welche in Serien verklebt werden Karton-Formate: Länge 150 – ∞ mm Breite 150 – 500 mm Höhe: 140 – 560 mm Technische Daten: Betriebsspannung 220 V CE-Kennzeichnung Zubehör: Zu unserem VOGEL-Karton-Verschließer-Programm bieten wir Laufrollen, Vor- und Nachlauftische, Rollenbahnen an. Unser Kartonverschliesser YS501X ECONOMIC ist eine günstige Lösung, wenn es darum geht Kartons in eher großen Formaten sicher zu verschließen. Durch zwei seitliche Förderbänder werden Ihre Kartons sicher durch den Kartonverschliesser befördert. Die Einstellung der Kartonbreite erfolgt mechanisch über eine Kurbel. Die Höheneinstellung ist bei dieser Maschine besonders leicht und schnell zu lösen, denn das obere Klebeaggregat muss nur entriegelt werden und kann dann einfach auf die jeweilige Höhe gebracht werden. Auf Grund der mechanischen Einstellung der Formate ist diese Maschine für Serienproduktionen gedacht, bei welcher eine längere Zeit hintereinander Kartons im gleichen Format verschlossen werden sollen. Die Deckelklappen der Kartons werden vor dem Zuführen in die Maschine manuell niedergedrückt. Ausgelegt ist diese Maschine für Klebebänder mit 76mm Kerndurchmesser und 50 mm Breite. Wir empfehlen dazu den Einsatz von Maschinenklebeband mit mehr Metern je Rolle ( als bei Handrollen), so können Sie länger arbeiten ohne das Klebeband wechseln zu müssen! Es können gleichermaßen PP & PVC Klebebänder, wie auch umweltfreundliche Papierklebebänder genutzt werden. Die Klebeaggregate können leicht heraus genommen werden, um die Kleberollen zu wechseln. Fodpfx Aoz E Imdjivsgh Ebenso kann dies aber auch genutzt werden, wenn Sie Kartons vielleicht nur oben zukleben wollen ( Stichwort: Automatikbodenkartons). Selbstverständlich trägt auch diese Maschine das CE Zeichen.

Condition: new, Year of construction: 2026, machine/vehicle number: YS501X, Die Kartonverschließmaschine vom Typ VOGEL YS501X ECONOMIC ist unsere Empfehlung speziell für eher große Kartonformate, welche in Serien verklebt werden Karton-Formate: Länge 150 – ∞ mm Breite 150 – 500 mm Höhe: 140 – 560 mm Technische Daten: Betriebsspannung 220 V CE-Kennzeichnung Zubehör: Zu unserem VOGEL-Karton-Verschließer-Programm bieten wir Laufrollen, Vor- und Nachlauftische, Rollenbahnen an. Unser Kartonverschliesser YS501X ECONOMIC ist eine günstige Lösung, wenn es darum geht Kartons in eher großen Formaten sicher zu verschließen. Durch zwei seitliche Förderbänder werden Ihre Kartons sicher durch den Kartonverschliesser befördert. Die Einstellung der Kartonbreite erfolgt mechanisch über eine Kurbel. Die Höheneinstellung ist bei dieser Maschine besonders leicht und schnell zu lösen, denn das obere Klebeaggregat muss nur entriegelt werden und kann dann einfach auf die jeweilige Höhe gebracht werden. Auf Grund der mechanischen Einstellung der Formate ist diese Maschine für Serienproduktionen gedacht, bei welcher eine längere Zeit hintereinander Kartons im gleichen Format verschlossen werden sollen. Die Deckelklappen der Kartons werden vor dem Zuführen in die Maschine manuell niedergedrückt. Ausgelegt ist diese Maschine für Klebebänder mit 76mm Kerndurchmesser und 50 mm Breite. Wir empfehlen dazu den Einsatz von Maschinenklebeband mit mehr Metern je Rolle ( als bei Handrollen), so können Sie länger arbeiten ohne das Klebeband wechseln zu müssen! Es können gleichermaßen PP & PVC Klebebänder, wie auch umweltfreundliche Papierklebebänder genutzt werden. Die Klebeaggregate können leicht heraus genommen werden, um die Kleberollen zu wechseln. Ebenso kann dies aber auch genutzt werden, wenn Sie Kartons vielleicht nur oben zukleben wollen ( Stichwort: Automatikbodenkartons). Selbstverständlich trägt auch diese Maschine das CE Zeichen. Fodpfoz E Iqcjx Aivegh

Condition: ready for operation (used), Operating manual for Brother TC-225 machine, model 38351, over 400 pages, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgedpsz Dnw Hsfx Aivsh

Condition: new, Year of construction: 2024, Grinding wheel D x B 455 x 255 mm, workpiece diameter 1 - 60 mm, regulating wheel D x B 255 x 255 mm, regulating wheel speed 10 - 100 rpm, Fgjdpfx Aedlgq Ujiveh drive power 11 kW, weight approx. 3.7 tons, dimensions approx. 2,700 x 1,700 mm Machine suitable for continuous and plunge grinding, hardened and ground guideways, grinding and regulating spindle with hydrodynamic three-point bearing, central lubrication for slides and feed spindles, regulating wheel drive via DS motor, frequency-controlled, hydraulic dressing devices for grinding and regulating wheel, electrical equipment predominantly with Siemens components, electrical control cabinet assembled in Germany, GC 1810-NC with stepper motor and Siemens S7 control for plunge and feed movement. Very economical price/performance ratio.

Condition: ready for operation (used), Milling table 800x500x210.50 for DMC 63V machine, used, good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Fgodpey Srnwefx Aivjh

Condition: used, functionality: limited functionality, machine/vehicle number: 118 255, distance between centers: 2,500 mm, year of last overhaul: 2016, The machine is operational and in production use and can be inspected after prior arrangement. Delivery in November 2026. No delivery service is included; dismantling and transport are the responsibility of the buyer. Two 5-ton cranes are available for loading. The sale is made without any warranty or guarantee, and only to commercial buyers, plus VAT; no liability for material defects. Maximum distance between centers: 2500 mm Maximum height between centers: 250 mm The machine has limited functionality because the feed mechanism occasionally fails to operate. Fodpfx Asz I T A Aoivsgh The sale includes the coolant system.

Condition: refurbished (used), Hydraulic pump, Sperry Vickers Type: GPA2-10-E-30-R-GE 334 Fedpfx Aed Szm Tjivjgh with attachment, gear motor coupling, Leroy-Somer from Kupplungstechnik

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89A 2664, power: 18.5 kW (25.15 HP), overall weight: 1,950 kg, fuel type: electric, loading space volume: 1.6 m³, loading space width: 800 mm, loading space length: 1,000 mm, loading space height: 2,000 mm, Description For sale is a robust ZENO wood waste shredder / single-shaft shredder, type ZTLL 800 × 1000, manufactured in 1989. The machine is in good working order and was used in a wood processing facility. The shredder features an 18.5 kW main drive and a hydraulic pusher floor. The feed hopper measures 1,000 × 800 mm, and the height is approximately 2,000 mm. The rotor diameter is approximately 300 mm (type-specific), and the rotor speed is approximately 140 rpm. The machine weight is approximately 1,950 kg (type-specific). Fsdpjz Ikz Ajfx Aivsgh The rotor is equipped with cutting plates / individual teeth mounted on tool holders. The blades or cutting teeth are in good used condition. The rotor also shows a well-maintained condition with no significant damage visible in the provided images. It is fitted with a sturdy, reinforced perforated screen basket with a 20 mm hole diameter. The perforated screen is in very good condition. The 20 mm screening is suitable for producing a correspondingly fine, uniform shredded material. The complete electrical control system, including the control cabinet, is included in the scope of delivery. This includes, among other things, a main switch, system on/off, operating and fault indicators, forward/reverse, and control for the hydraulic pump. The control cabinet is fully present and will be sold together with the machine. The offer also includes a powerful transport fan for pneumatic transport of the shredded material. The fan motor has 18.5 kW / 25 hp, 380/660 V, 36.5/21 A, 1,455 rpm, 50 Hz, cos φ 0.86, and protection class IP54. The motor weight is 136 kg. Existing pipes and fittings belonging to the system can be taken over after inspection. This means that not only the shredder itself is offered, but a largely complete combination of wood waste shredding, control, and pneumatic material transport. The machine is particularly suitable for wood waste and production residues from carpentry shops, interior design, timber construction, joineries, and comparable wood processing companies. Inspections are possible by appointment. The location of the system is 3608 Thun, Switzerland. Sale from the location. Dismantling, loading, and transport, as well as any export and customs costs, are the responsibility of the buyer, unless otherwise agreed in writing. The machine is sold in its existing used condition as inspected. Technical specifications are provided to the best of our knowledge; errors and prior sale are reserved. Selling price: 12,500.00 EUR Price net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer. Technical specifications in brief Manufacturer: ZENO Zerkleinerungsmaschinenbau Norken GmbH · Type: ZTLL 800 × 1000 · Year of manufacture: 1989 · Machine No.: 89A 2664 · Feed hopper: 1,000 × 800 mm · Height: approx. 2,000 mm · Main drive: 18.5 kW · hydraulic pusher floor · Perforated screen: Ø 20 mm, very good condition · Blades/cutting teeth: good condition · Rotor diameter: approx. 300 mm* · Rotor speed: approx. 140 rpm* · Machine weight: approx. 1,950 kg* · complete control cabinet included · Transport fan: 18.5 kW / 25 hp. * Type-specific comparison data ZENO ZTLL 800 × 1000. The specifications and condition of the offered machine are binding.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Fodpfx Aszizkyjivjgh Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: ready for operation (used), Mikron angle table for WF51D / TNC machine. Length: 100 cm / Depth: 49 cm / Height: 44 cm, used, in good condition, 100% functional. Delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Fgsdpfoy Nryzox Aivoh