Used Hermle C 600 for sale (118)

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 700 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 4,200 rpm, number of axes: 3, This 3-axis HERMLE UWF 1002 H was manufactured in 1995. It features an X-axis travel of 700 mm, Y-axis travel of 630 mm, and Z-axis travel of 500 mm. The machine has a table load capacity of 700 kg and a table surface area of 1000 x 490 mm. If you are looking to get high-quality machining capabilities, consider the HERMLE UWF 1002 H vertical machining centre we have for sale. Contact us for further details. Dksdszk Inbspfx Aa Hst - Operating Voltage: 400 V / 3~- Control Voltage: 24 V DC / 220 V AC- Frequency: 50 Hz- Total Nominal Current: 33 A- Total Rating: 23 kVA (with IKZ) / 21 kW- X-Axis Travel: 700 mm- Y-Axis Travel: 630 mm- Z-Axis Travel: 500 mm- Net Weight: 6,800 kg- Table Load Capacity: 700 kg- Table Surface Area: 1000 x 490 mm- Coolant Tank Capacity: 240 Liters- Coolant Flow Rate / Pressure: 20 L/min / max. 4 bar- Electrical Drawing No.: HS 460-2- Standard Features: Full protective cabin, 5-axis contouring control, Cast iron/mineral cast composite construction in the machine base and cross support, Heat exchanger in the control cabinet, Brushless AC motors, Work area lights- Current Errors/Issues: Motor encoder Z: Amplitude too small

Condition: used, Year of construction: 1997, machine/vehicle number: 11968, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, Used HERMLE universal milling machine model U 630 S, year of manufacture 1997, equipped with Heidenhain TNC 410 control and full safety enclosure. Travels: X = 630 mm, Y = 500 mm, Z = 500 mm Table size: 900 x 528 mm, 7x T-slots 14 mm, spindle taper SK40 DIN 69871 Speeds: Gear stage 1 = 20–1,428.6 rpm, gear stage 2 = 1,428.6–7,000 rpm. Separate coolant tank 120 litres, Heidenhain electronic handwheel HS410, Heidenhain measuring probe TS 220 Includes mobile tool trolley for SK40 tool holders with approx. 80 tool holders included. The machine is located at our premises in 71334 Waiblingen-Beinstein and can be inspected by appointment. Djdpfoygwz Rex Aa Hskt

Year of construction: 1989, condition: ready for operation (used), X-axis travel: 700 mm, Y-axis travel: 550 mm, Z-axis travel: 500 mm, spindle speed: 25 to 4200 rpm, three speed ranges, feed rate: 1 to 5000 mm/min, rapid traverse in X, Y and Z: 10 m/min, vertical quill travel: 95 mm, clamping table dimensions: 1000 x 500 mm, spindle motor power: 12 kW, connected load: 18 kW, control system: Heidenhain TNC 355, length: 4260 mm, width: 4400 mm, height: 2300 mm, weight: 3.5 t, operating hours: 31,248 h. The machine is equipped with an SK40 tool spindle in accordance with DIN 2079, a swivelling spindle head, a spindle head that can be swung away for machining with the horizontal spindle, an outboard support for horizontal machining, direct measuring systems, a coolant system with a 100 litre reservoir, approximately 38 tool holders, most of which are fitted with tools, a table with tool holders, a workbench with cabinet, various hand tools, various clamping devices, a three-jaw chuck with clamping ring and documentation. The screen has burn-in marks but is still readable. An on-site inspection is possible. Dodpozrn Ikofx Aa Hjkt

Condition: good (used), Year of construction: 2000, functionality: fully functional, Hermle U 630 S, Dkedpfx Aezpwnnea Hst Year of manufacture: 2000, Control system: Heidenhain TNC 430, Travel range X/Y/Z: 630/530/500 mm, Spindle speed up to 7,000 rpm, Max. table load: 800 kg, Electric handwheel, 3D measuring probe.

Condition: good (used), Year of construction: 1997, CNC milling center HERMLE U 630 S, serial number 12052, year of manufacture 1997, control system HEIDENHAIN, travel ranges: 800 × 560 × 510 mm, spindle speed up to 12,000 rpm, tool holder SK40. Dsdpfoznlztjx Aa Hjkt

Condition: good (used), Universal machining center HERMLE UWF 801, serial number 5798, control system HEIDENHAIN HS 144, travel ranges: 500 × 430 × 400 mm, spindle: SK40, spindle speed up to 2,000 rpm. Dkedpsznlzmjfx Aa Het

Condition: good (used), Year of construction: 2001, Vertical machining center Machine type: Hermle U 630 T Dkjdpfx Aeziy Nuja Hot Control: Heidenhain TNC 426 Year: 2001 SPECIFICATIONS Travel X-Axis: 875 mm Y-Axis: 500 mm Z-Axis: 500 mm Panning head: 90° quill range: 75 mm Spindle speeds: 7.000 rpm Tool: SK 40 Tool capacity: 16 Table size: 900 x 528 mm Equipment

Condition: used, Year of construction: 1999, x-travel 630 (875) mm y-travel 500 mm z-travel 500 mm Control Heidenhain TNC 430 turning speeds 20-7.000 U/min feed 0-15.000 mm/min tool change unit 16-fach rapid power traverse in X-and Z direction 15 m/min tool taper SK 40 Dedpfxjzh N T Ho Aa Hjkt table surface area 900 x 528 mm max. table load 400 kg spindle diameter in front bearing 55 mm swivellable 0-90 ° quill stroke 75 mm spindle hours 9.546 h total power requirement 12/7,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 4 x 3,6 x 2,2 m HERMLE U 630T 3-axis machining centre, built in 1999 The X-axis, with a stroke of 630 mm, can be extended to 875 mm by swivelling the tool changer out of the way. Accessories: Tool holders, see pictures

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, mount diameter: 40 mm, table length: 1,000 mm, table width: 500 mm, overall weight: 3,500 kg, X-axis / longitudinal 700 mm Y-axis / transverse 550 mm Z-axis / vertical 500 mm Table dimensions 1000 x 500 mm Spindle speed range stepless in 3 gear steps 25 - 4200 rpm Tool holder SK 40 Feed range X-Y-Z 1 - 10000 mm/min Rapid traverse X-Y-Z 10000 mm/min Weight approx. 3500 kg Control: Heidenhain TNC 407 - TNC 415 Djdpfx Aaoxg Rxbj Hskt

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 7,000 rpm, travel distance X-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 415, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 1999. It features a Heidenhain TNC 415 control system, ensuring precision and reliability in operation. The machine is in very good condition and fully operational. If you are looking to get high-quality milling capabilities, consider the HERMLE U 630 T universal milling machine we have for sale. Contact us for further details. Dksdozbu I Djpfx Aa Het • Machine Type: Universal Milling Machine • Condition: Very good / Fully operational • Control System: Heidenhain TNC 415

Condition: good (used), BHG Hermle CNC milling machine Type: UWF 1000 Control: Heidenhain TNC 355 X-path: 700 mm Dsdpfxsqwgzbe Aa Hokt Y-path: 550 mm Z-path: 500 mm Bed: 490 x 1000 mm Spindle: ISO 40 Speed: 3150 rpm Year of manufacture: 1988 Including documentation and parameters Dimensions: 230x200x220 cm LxWxH Weight: approx. 4000 KG

Condition: excellent (used), Year of construction: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS, cycle-controlled, year of manufacture 1998, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical specifications: Dkedpfxswyn Rqe Aa Hst Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed rate X and Y: 2 to 1600 mm/min, stepless Feed rate Z: 2 to 1000 mm/min, stepless Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable in 18 gear steps - Vertical milling head swivels to the right and left - Hydro-mechanical tool clamping vertical and horizontal - Automatic central lubrication - Separate coolant unit - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight: approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with NC control HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take this opportunity to view the machine under power on-site and see its condition for yourself.

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: Dsdetqmm Ajpfx Aa Hokt table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Condition: used, Year of construction: 1986, x-travel 390/410 mm y-travel 290/310 mm z-travel 380/400 mm total power requirement 4 kW weight of the machine ca. 1,25 t dimensions of the machine ca. 2100x2100x1700 m technical data please see attachment! Dkedjvylkcopfx Aa Hjt

Condition: used, Travel ranges and axes • X-axis (longitudinal): 600 mm • Y-axis (transverse): 400 mm • Z-axis (vertical): 420 mm Spindle • Speed range: 20 to 4,000 rpm • Tool holder: SK 40 (ISO 40) • Milling head: Manual • Spindle drive power: approx. 6 – 7 kW Work table • Clamping area: 900 x 460 mm • Max. table load: 400 kg • T-slots: 7 pieces (standard 14 mm H7, spacing 63 mm) Feeds and speeds • Working feed (X/Y/Z): 1 to 5,000 / 6,000 mm/min • Rapid traverse X and Y axis: 7 m/min • Rapid traverse Z axis: 6 m/min Electrical connection data and dimensions Dksdpfxjzh Evws Aa Hst • Total power requirement: approx. 12 – 13 kW • Machine weight: approx. 2,300 kg • Space requirement (L x W x H): approx. 4.0 x 3.8 x 2.0 m Control system • CNC control: Heidenhain HS412 Technical data without guarantee Machine is fully functional and in good condition.

Condition: used, Year of construction: 1986, x-travel 500 mm y-travel 360 mm z-travel 400 mm Dkedpfx Aaoyt R Eis Hjt Control Siemens 810 tool taper SK 40 table surface area 800x390 mm T-slot - width 14H7 mm number of T-slots 6 T-slot - distance 63 mm turning speeds 20-4000 U/min transmission ratio 4 Feed 1-2000 mm/min rapid traverse 5 m/min total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,5x2,9x1,9 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm tool taper: IBAG SKI 25 control: Heidenhain TNC 425 quill stroke vertical: nicht bekannt mm turning speed range: 2400 - 24.000 U/min feed:: 1 ... 5000 m/min m/min table surface area: 850 x 440 mm table swivelabel +/-: starr ° table load: 500 kg tool holder / places: 32 places für IBAC SKI 25 weight approx.: 3600 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet: L:1550 X B:550 x H:1700 mm Universal Milling and Drilling Machine - with IBAG high frequency spindle type HF 100A-30/24 - milling spindle taper Tool taper IBAG SKI with IBAG tightening bolt - cooling tank, capacity 16 l/min and 100 litre capacity Accessories: - 3-D push-button Heimer - Vertical head Hermle - Tool holders according to availability Dkedpfeu Nc Uhox Aa Hst i.D. *

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm control: Heidenhain TNC 425 spindle taper ISO: SK 40 DIN 69871 quill stroke vertical: 75 mm distance between column - table edge: 190 (fest) vertikal mm spindle head swivable left - right: 90° Vertikal-Spindel ° distance between table/spindle: min./max.: 165/565 Vertikal-Spindel mm distance between table/spindle: min./max.: 165/565 Horizontal-Spindel mm turning speed range: 20 ... 4500 U/min tool changer with: 32 tools (Typ HTC 32) feed:: 1 ... 5000 mm/min Table dimensions: 850x440 mm table swivelabel +/-: nein = starr ° table load: 500 kg Dsdpfx Aaeu Nc T Rj Hokt total power requirement: 15 kW weight approx.: 3500 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet LxWxH: 1,6 x 0,6 x 1,7 m Universal Milling and Drilling Machine Equipment: - cooling tank capacity 100 litres, flow rate 16 l/min - control panel with jib length arm - hand wheel control unit - 8 pieces machine base The machine can be demonstrated under power. i.D. *

Condition: used, Year of construction: 1992, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm spindle taper ISO: SK 40 control: Heidenhain TNC 360 quill stroke vertical: 75 mm turning speed range: 20 ... 4000 U/min spindle head swivable left - right: 90° links / rechts ° feed:: X/Y/Z: 1...6000 mm/min. feed:: X/Y: 7 m/min. + Z: 6 m/min. Table dimensions: 900 x 460 mm table load capacity: 400 kg weight approx.: 2300 kg dimension machine xH: 4,0 x 3,8 x 2,0 m total power requirement: 13 kW Equipment: - separated production cell - coolant system - control panel with swivel-mounted boom - measuring probe SK 40 Heidenhain TS 120 - oil collecting basin Dksdpfou Nc U Isx Aa Het *

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant Dkedpfoy Nnw Nex Aa Hjt

Condition: excellent (used), Year of construction: 1998, Hermle UWF 802 M Hermle UWF 802 M with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel distances X: 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 390 mm Spindle connection ISO 40 Spindle speed 71 to 3550 rpm, 18 steps Feed rate X and Y 2 to 1600 mm/min, stepless Feed rate Z 2 to 1000 mm/min, stepless Rapid traverse X and Y 1.6 m/min Rapid traverse Z 1 m/min Spindle drive 3 kW Mains connection 400 volts, 50 Hz - Spindle speed via 18 gear stages - Vertical milling head, swiveling to the right and left - Hydro-mechanical tool clamping, vertical and horizontal - Automatic central lubrication - Coolant system located next to the machine - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Space requirement L x W x H 2000 x 1800 x 1950 mm Weight approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: Dodpfx Aaozbrz Io Hokt We offer a Hermle UWF 802 M milling machine with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good condition. The machine is fully functional, of course. All slides move very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see for yourself what condition it is in.

Condition: used, Hermle H 2 milling machine with accessories Dsdpfsugv Nwsx Aa Hskt

Condition: used, Year of construction: 1988, x-travel 700 mm y-travel 550 mm z-travel 500 mm spindle taper ISO 40 control Heidenhain type TNC 155 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Dkedoyuttlepfx Aa Hot About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min Dodoflrg Tepfx Aa Hskt electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm z-travel:350 mm table surface area:690 x 175 mm spindle taper:SK40 turning speeds steps:17 Dkjdocxxntjpfx Aa Het feed range:42 - 680 mm/min feed steps:14 turning speed range:50 - 2240 U/min weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch