Used Heavy Machinery for sale (77,563)

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW Kwedpekahu Rofx Aalsw column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg Kodpskahu Ujfx Aaleww - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Year of construction: 2020, operating hours: 245 h, condition: good (used), functionality: fully functional, machine/vehicle number: QX20200111A551, Used - Pre insulated pipe decoiler. The decoiler could be used for other pipe types. Kjdpfst Eatxsx Aalsww Pipe coiler parameters: Installed power: 5.5 KW Voltage: 220V Current frequency: 50 Hz Compressed air: 6 Bar Total weight: 1700 kg Coil dimensions: Coil ID: 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400mm Coil OD: up to 3100mm Coil width: up to 1100mm Please call for more information

Condition: good (used), Year of construction: 2005, turning diameter over cross slide: 240 mm, turning length: 1,016 mm, turning diameter: 406 mm, spindle bore: 51 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, quill stroke: 120 mm, Main spindle (headstock) Spindle bore: 51.5 mm Spindle mount: D1-6 Spindle taper: MT 6 Speed steps: 12 steps Speed range: 30 – 2,000 rpm Feeds & threads Longitudinal feeds: 0.03 – 0.89 mm/rev Cross feeds: 0.015 – 0.44 mm/rev Metric threads: 0.4 – 14 mm (52 types) Inch threads: 2 – 56 TPI (40 types) Tailstock & carriage Tailstock taper: MT 4 Quill stroke: 120 mm Top slide travel: 120 mm Cross slide travel: 228 mm Drive & dimensions Kedpfx Aeyi D Tfoalsww Main motor: 7.5 HP (approx. 5.5 kW), 3-phase Weight: approx. 1,945 kg Dimensions (LxWxH): approx. 226 x 96 x 165 cm

Condition: new, Year of construction: 2025, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 24 m/min, total length: 6,200 mm, overall weight: 2,600 kg, Equipment: documentation/manual, New (year of manufacture 2025). Immediately available from stock. The KDT KE-710BT is a professional solution for precise edge banding of curved (contoured) workpieces. The machine combines flexibility with the highest industrial quality. Highlights and features: • Precise CNC control: Easy programming for complex geometries. • Automatic trimming and milling: Complete edge processing in a single pass. • Highly efficient gluing system: Even adhesive application for perfect joints. Kwsdpjym Arhofx Aaljw • User-friendly interface: Intuitive operation via touchscreen.

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 2,800 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 50 mm, feed rate X-axis: 140 m/min, feed rate Y-axis: 90 m/min, feed rate Z-axis: 50 m/min, workpiece length (max.): 2,800 mm, workpiece width (max.): 1,000 mm, control type: CNC control, High-performance CNC drilling center KDT KD-610NHZ for six-sided machining of workpieces. Immediately available from stock. Upper and lower drilling units. Precise machining and high speed. Ideal for carcass furniture production. The machine can be inspected by appointment. Kwsdoymz Aljpfx Aalow

Condition: like new (used), Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed. Kwsdpedz Tcbjfx Aalsw

Condition: good (used), 1 x Burnely Packaging Machinery Heat Shrink Tunnel Model: PE500/300 Fully tested Kodoxrcyzopfx Aaleww Purchased and installed for a trail product, no longer needed. Comes with new replacement belts Located in Leek, UK

Condition: good (used), 1 x Burnely Packaging Machinery Heat Shrink Tunnel Model: PE500/300 Kedpfsxrcyujx Aaleww Fully tested Purchased and installed for a trail product, no longer needed. Comes with new replacement belts Located in Leek, UK

Condition: excellent (used), 1 X Machinery Automation Ltd Capping line Technical specification: Kwedpfxow E Ey Tj Aalow ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Heigh - 30 – 300mm Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Kjdpfx Aexn Aagsaleww

Year of construction: 2009, condition: ready for operation (used), A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) Central control system ACCS-2000 with an order storage capacity of 100,000. The entire system has a remote control system for the flexo units, folding and gluing unit and bundle ejector. Documentation available. On-site inspection is possible. Expected to be available from October 2025. Kwodpfou S I D Rex Aaljw

Year of construction: 2011, condition: ready for operation (used), X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible. Kwedpfjwc A Rkox Aalow

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. Usage: Butter and Various Viscous Pastes Construction: Fully Stainless steel and Glass Blasted to provide the finish on the metal and harden the surface. Kjdourulpjpfx Aaljww Shapes and sizes: Choose your own shpe and size Volumes: Depending on Model we can offer machines for 50g Up to 25Kg Blocks in Boxes. Hopper volumes on extruders: 18 Litres and 50Litres Control panel: Butter Working Switch, Butter Extruding Switch, Start/Stop and Safety: Machine is Equiped with Stainless Steel Cover that Brings The Machine To a Stop If This is Opened. Cutting: Cutting Wires come down manualy and bring the machine to a Stop Out feed: Out Feed Conveyor is Built with Stainless Steel Rollers that help the Prodcut Slide Out Avoiding any Sticking and Changing The Prodcut Shape. Electricity: This Machine can work on Single Phase 220v /50hz , 3Phase 400v / 50hz and US Electrics on 60hz. Choose on Order. Lead time: 5weeks Warranty: 12 months Spare parts: Dairy Machinery UK Finance Available: Pay Monthly, Ask For A Quote

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Kodpfx Aewhylvsaleww Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: Ksdpfxoyh Ri Is Aaljww - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Coating, laminating – additional unwinder for lamination Ksdpfxsxwaiko Aaloww Corona treatment – during coating of film with water-based dispersions Working width – 1700 mm Coating speed – 0–100 m/min Material in rolls Raw material – paper (50–300 g/m²), film (0.023–0.10 mm) Substances – solvent-based adhesive, water-based adhesive Type of coating – coating head: Mayer rod, anilox roller, slot die roller Dryer – length 18 m, 7 drying sections, temperature 30°C–170°C, gas drying (blower) Roll diameter – max 1400 mm Machine includes hot air generator Detailed description available on request.

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. Kedpop R Iwhofx Aaloww This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Ksdpfeiv R Hhox Aaleww Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, Year of construction: 2026, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Kedpfx Aasf Hkgpoleww

Condition: good (used), I sell the heavy duty fourside moulder SK MACHINERY 907S. Element max. 240x150mm ! 7 spindle configuration: Bottom 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Left 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Kwsdepwdwbspfx Aalsw Top 7,5kW (10HP) / 6000 rpm Top 12kW (15HP) / 6000 rpm Bottom 5,5kW (7,5HP) / 6000 rpm Total power 62KW / 102 A Total weight 5000kg. Element max. 240x150mm ! Moulding heads with spiral knives fi.140x260x40mm included in price. Electronic programmer for the working width and height adjustment of the pressure zone and top spinde, aka working height. Feeding speed adjustable by inverter. Zone pneumatic pressure system for feeding wheels. Available immediately Repair required: Bearings on one spindle which is already outside.

Year of construction: 2018, condition: as good as new (ex-display), Offer here as new machine for gluing shafts including corner gluing machine and many high quality tools. Box sizes: Minimum: 80x65x10 mm Maximum: 430x350x120 mm Kwodog U Irwspfx Aalew More details and price after personal consultation

Condition: new, Year of construction: 2023, operating hours: 687 h, functionality: fully functional, machine/vehicle number: 9353740, turning diameter over cross slide: 318 mm, turning length: 470 mm, turning diameter: 260 mm, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, spindle motor power: 15 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total length: 2,900 mm, total width: 1,600 mm, feed length X-axis: 220 mm, feed length Z-axis: 600 mm, quill diameter: 52 mm, overall weight: 3,600 kg, bar passage: 52 mm, Equipment: documentation/manual, For sale: High-precision CNC lathe Accuway Machinery UT200-M, equipped with live tooling and a C axis, ideal for demanding and high-speed machining tasks. Key features: - Model: UT200-M - Manufacturer: Accuway Machinery (Taiwan) - Year of manufacture: 2023 - Control unit: Fanuc Series 0i-TF Plus - Integrated manual guide for easier programming and simulation Machine specifications: - Maximum turning diameter: 260 mm - Maximum turning length: 470 mm - Swing over bed: 505 mm - Swing over cross slide: 318 mm - Number of turret stations: 12 - Spindle speed range: 6000 / 4500 / 4000 / 3500 rpm - Tailstock quill diameter: 75 mm - Tailstock quill taper: MT#4 Dimensions and weight: - Length: 2.9 m - Width: 1.6 m - Height: 1.9 m - Weight: 3,600 kg Included accessories: - 8 tool holders (5 for external turning, 3 for internal turning) - Live tooling set (Heimatec) – for axial and radial milling Ksdpoytpbpjfx Aaloww - Chip conveyor - Chip collection cart - Air filtration system - Signal tower (red/yellow/green lights) – real-time machine status - Manual guide – for easy manual programming and path verification The machine was purchased new in August 2024, has seen very minimal use relative to its full capabilities, and is immediately ready for operation. For further information regarding condition, price adjustments, technical details, or to arrange a viewing, feel free to contact me via message or phone.

Condition: new, Year of construction: 2023, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 540 mm, workpiece weight (max.): 6 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, spindle speed (max.): 12,000 rpm, table load: 500 kg, YCM vertical machining center model NXV-1020A Fanuc control MXP-300FB+ Screen size 15" 12,000 revolutions 30 tools 20 bar internal cooling Hinged belt chip conveyor Spindle oil cooler Oil separator Steep taper 40 - DIN-69871A or BBT-40 Machine-side cable preparation for 4th axis connection Demonstration machine at a special price Sale only possible in Germany and Austria Kwodpfxerfdckj Aalsw

Year of construction: 2007, operating hours: 2,000 h, condition: used, functionality: fully functional, cylinder diameter: 200 mm, pressure (max.): 6,000 bar, machine/vehicle number: 600/55, High-Pressure Food Processing Machine (HPP System) – Wave 6000/55 Kodox E Utiopfx Aaloww This high-pressure food pasteurization system (HPP) is a unit designed for batch processing of packaged food using hydrostatic pressure. The machine is fully operational, well maintained, and suitable for research, product development, and low-to-medium volume industrial production. High-pressure processing (HPP) offers significant advantages for food manufacturers seeking to improve product safety, quality, and shelf life without the use of heat or preservatives. By applying up to 600 MPa of hydrostatic pressure to already packaged products, HPP inactivates harmful pathogens such as Listeria monocytogenes, Salmonella, and E. coli while preserving the natural taste, texture, nutrients, and color of the food. This makes HPP an attractive technology for clean-label formulations. In addition, the process typically doubles or even triples the shelf life of many refrigerated foods, reducing waste and improving distribution flexibility. Because HPP is a post-packaging treatment, recontamination risks are minimized, enabling manufacturers to meet stringent food safety standards in domestic and export markets. The technology is suitable for a wide range of products, including meat, seafood, juices, plant-based foods, ready-to-eat meals, and high-value chilled items. The system offers a treatment chamber volume of 55 L, reaching pressures up to 6,000 bar (600 MPa), with automatic basket loading/unloading and an integrated intensifier. It is ideal for enhancing food safety, extending shelf life, and enabling clean-label product concepts. Technical Details Model: Wave 6000/55 Chamber layout: Horizontal Chamber dimensions: Ø 200 mm × 2,000 mm Chamber volume: 55 L Total equipment length: 8,020 mm Maximum working pressure: 6,000 bar (600 MPa) Pressure medium: Water, free of additives Processing water temperature: +5 °C to +30 °C Pressure-build time (0–6,000 bar): 3.9 min Intensifiers: 1 integrated Electrical power: 47 kW (50 Hz) Loading/unloading system: Automatic Total weight: ~20,000 kg Condition and Use Cases The machine is in very good condition and suitable for: Meat, seafood, ready-to-eat meals Dairy, beverages, plant-based products Shelf-life extension and pathogen reduction R&D, validation trials, pilot production Cycles completed (as of Jan 2025): 20,000 Included with the High Pressure Food Processor WAVE 6000/55: High-pressure vessel made of stainless steel, wire-wound with high-resistance cable; horizontal layout with 55 L useful volume Yoke constructed from high-quality steel layers, double-primed and painted Stainless steel vessel plugs Support beds Hydraulic power unit with vessel opening/closing mechanisms Integrated intensifier (1 unit) High-pressure stainless steel piping for intensifier–vessel connection Water filtration system (5 µm) Temperature probe for monitoring processing water via the client fluid circuit Tactile touch screen for automatic and manual operation (interface in German) Electrical control cabinet SCADA system for control and data recording Internet communication module for remote service Instruction manual The machine has been used for reasearch purposes and has only done ~20.000 cycles. It is assumed the average cycle length is 6minutes = 2,000 hours All technical specifications and details are provided without guarantee. Subject to prior sale and possible errors or omissions.