Used Guide Cover for sale (10,979)

Condition: excellent (used), 1 used, very well-maintained horizontal boring and milling machine / table drilling machine with point-to-point and contour control HEIDENHAIN TNC 145 and facing head Manufacturer: WMW UNION, Origin Germany Model: BFT 130/7-TNC 145 Year of manufacture: 1984 Technical data: Spindle diameter: 130 mm Spindle shank: SK 50 Table surface: 2000 x 1800 mm Travel: X-axis, transverse 2785 mm Y-axis, vertical 2520 mm Z-axis, longitudinal 2345 mm W-axis, quill 900 mm B-axis, table 360° Table load: 8000 kg Speed range: 5-1000 rpm Facing head speed: 5-2500 rpm Feed force X/Y/Z: 20000/20000/25000 N Feed rate X/Y/Z: 5-2500/5-2500/2-2500 mm/min Rapid traverse X/Y/Z: 5/5/3.15 m/min Total connected power: 100 kVA Total power consumption: 70 kW Footprint L x W x H: approx. 8.40 x 5.9 x 5.5 m Bodpez Euuzsfx Aa Ijdh Weight: 35,300 kg Accessories / Special features: • Point-to-point and contour control HEIDENHAIN TNC 145 • Spindle Ø 130 mm with SK 50 with motorized tool clamping • Facing head • Feed and rapid traverse • Lateral table supports R + L with hardened guides • Coolant system • Guide rail telescope covers • Swiveling control panel • Separate control cabinet and hydraulic unit TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, mileage: 130,504 km, power: 230 kW (312.71 HP), first registration: 11/2000, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: semi-automatic, emission class: euro2, total length: 6,800 mm, total width: 2,550 mm, total height: 3,550 mm, Year of construction: 2000, Equipment: ABS, cruise control, fog lights, power assisted steering, power mirror, retarder, trailer coupling, = Additional options and accessories = Bdodpoy Hv E Aefx Aa Ieh - Hydraulic power steering - Portable radio set - Reverse camera - Sun visor = More information = Engine capacity: 11.946 cc Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 90%

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Bdodsvvkipopfx Aa Ieh

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: Bjdsu Tipkepfx Aa Isdh - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2026, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Bsdpfx Asv Sg T Nsa Ijdh Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: refurbished (used), Year of construction: 2026, center height: 100 mm, center width: 680 mm, total length: 620 mm, grinding diameter: 199 mm, Condition of the machine: The machine is currently in a used, unrevised condition. All wearing parts of the machine are replaced, including the feed spindle in the X-axis, and all assemblies are restored to a new condition. After the revision, the machine is easily comparable to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to a new condition. After the work is completed, the machine receives a measurement report according to the manufacturer's original specifications. Electronics: The electronics and the control cabinet housing are completely replaced. All electrical parts are replaced, including the motors. Bedpfov Hqlrsx Aa Iodh Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is overhauled and the hydraulic lines are replaced with new lines. Painting: As soon as the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are freed of the old paint, cleaned and repainted. Technical data of the machine: Center height: 100 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Weight and space requirement of the machine: 2600kg // 2320x1400x1450 mm Machine equipment (standard): • 1 piece grinding headstock Ø35 • 1 piece workpiece headstock MK5 • 1 piece protective cover for discs Ø 400 mm • 1 piece tailstock MK 3 standard • 1 piece flange Ø 127 mm • 1 piece hydraulic unit • 1 set of operating tools and operating instructions

Condition: used, loading space length: 190,000 mm, loading space width: 30,000 mm, loading space height: 8,150 mm, total width: 30,000 mm, Year of construction: 2006, Equipment: ABS, Goldhofer STZ-H6-57/80A Telescopic Lowboy Trailer for Railcar Transport                                 Approval          Technical 1 Speed:     80 km/h               65 km/h Fifth wheel load:               23,000 kg             26,000 kg Rear axle load:       10,000 kg             11,000 kg Total weight:     83,000 kg             92,000 kg Payload:                 52,500 kg             61,500 kg Tare weight (without accessories):         30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Height: 235 mm Fifth wheel height: 1,350 mm DLR front: 1,420 mm DLR rear: 2,700 mm Kingpin: 3.5 inches Inclination: inclined 10 degrees Front corners: inclined 45 degrees Decking: Spruce 50 mm Fifth wheel supports: mechanical Width with sideboards: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically raisable and lowerable with mechanical support tube and hydraulic support cylinders Hydromechanical forced steering (2-circuit steering) in a low-profile design (height 235 mm) with adjustable guide elements and THP steering cylinders. Loading platform: Type: Platform Ratable: No Length: 13,000 mm Width: 3,000 mm Decking: Steel sheet/Spruce 50 mm Wheel wells: No Extensions: No Extendable: single-telescopic Length 1: 10,000 mm Loading heights (loaded) Loading height 1: 815 mm Extendable loading platform, designed as an outer and inner tube construction, with a fixed loading platform section of 1,070 mm in length at the front. Bolt-tab coupling integrated into the fixed loading platform section for connecting railcar bridge extension beams; the welded track rails serve as a rail track in the gauge widths of 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension stages by spring accumulator cylinders and conical bushings. Loading platform height on the frame center tube (outer tube) approx. 815 mm (+/- 130 mm) Loading platform height on the embedded rail elements approx. 790 mm (+/- 130 mm) Rear suspension: Suspension type: Standard Loading height loaded: 815 mm Width: 3,000 mm Track width: 1,360 mm Decking: Steel sheet Extensions: No Wheel wells: No Excavator well: No Axles: Number of axles: 6 Lift axle: see accessories Axle type: Curved steering knuckle Axle equalization: Hydraulic Axle manufacturer: BPW/Eco Riding positions: 1 Axle stroke (1) +/-: 130/130 mm Axle stroke (2) +/-: 0/0 mm Raise/lower valve: Yes 1st axle pneumatically liftable with lift bellows Steering: Number of steering axles: 6 Steering axle arrangement: all steered Maximum steering angle: 45° degrees Steering type: Hydraulic 2-circuit Tires: Dimension: 235/75 r 17.5 143/141 J Bjdpfx Ajyfvypsa Iodh Tire type: Twin Rim type: Disc Rim centering: Center-centered Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS connection spiral: No Parking brake: Spring accumulator EBS: No ECAS: No Note: Brake calculation No.: GH 4324S Suspension note: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow transverse outriggers in between (aluminum covers see above Accessories) Controls protected on the left in the direction of travel...

Condition: excellent (used), Year of construction: 2000, Ref:11124 . 2000 Rimagraf Multi Clipper Metal Cornering Machine. A semi-automatic electric and pneumatic two-head machine that simultaneously applies and presses two SYMMETRICAL metal corners of any type and size. The left head is fixed, while the right one can be easily adjusted (from a minimum of 120 mm to a maximum of 500 mm) depending on the size of the cover you are using. The corners are placed in the two loading tanks, which rotate to place them on the guide channels. Finally activate the pressing cycle using the foot pedal. Size-change requires only minimum adjustment. Technical data: Manual load Pneumatic connection required Bdedpfxszmx Hms Aa Ieh Operating voltage: 380V, 50-60Hz Dimensions: 600 x 1250 x 1400 mm Total weight: 180 kg.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 Bedpfx Aajy D Hy Ee Iedh • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 1,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.35 mm, number of axes: 4, wire diameter (min.): 0.1 mm, This 4-axis ONA KE500 wire EDM machine was manufactured in 2004. It features a maximum workpiece weight capacity of 5000 kg and a Z-axis travel of 400 mm. The machine offers impressive X-Y travel dimensions of 700 x 500 mm and U-V travel of 460 x 460 mm. If you are looking to get high-quality wire EDM capabilities, consider the ONA KE500 machine we have for sale. Contact us for further details. • Models covered: KE 350, KE 450, KE 500, KE 1000 • X–Y travel: • KE 350: 550 x 350 mm • KE 450 & KE 500: 700 x 500 mm • KE 1000: 1500 x 1000 mm • Z-axis travel: • KE 350, KE 450, KE 500: 400 mm • KE 1000: 600 mm • U–V travel: • KE 350 & KE 450: 140 x 140 mm • KE 500: 460 x 460 mm Bdjdpfx Ajzx Uxvoa Ish • KE 1000: 500 x 500 mm • Max. workpiece dimensions (X x Y x Z): • KE 350: 1050 x 800 x 400 mm • KE 450: 1200 x 950 x 400 mm • KE 500: 1500 x 1200 x 400 mm • KE 1000: 2300 x 1600 x 600 mm • Max. workpiece weight: • KE 350: 3000 kg • KE 450 & KE 500: 5000 kg • KE 1000: 10000 kg • Taper angle (Z): • KE 350 & KE 450: ±9° / 400 mm • KE 500: ±28° / 400 mm • KE 1000: ±20° / 600 mm • Max. taper angle: • KE 350 & KE 450: ±30° / 95 • KE 500: ±30° / 375 mm • KE 1000: ±30° / 400 mm • Wire spool type: DIN 100, DIN 125, DIN 160, DIN 200, DIN 355 • Guide type: High-precision zero-backlash closed diamond guide • Position resolution (X, Y, U, V): 0.001 mm • Minimum programmable increment: 0.001 mm

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, laser power: 8,000 W, CNC laser cutting system TruLaser 5030 Fiber (L68) 8000 Watt with LiftMaster X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 8000 Watt Standard equipment: Machine - Enclosed machine frame - Power supply for TruDisk integrated into the machine - Torque drive in combination with linear direct drives - Enclosed beam guidance via laser light cable (LLC) - Machine cooling unit (water-air) - Integrated control cabinets - Integrated cabinet - Automatic pallet changer in longitudinal direction - Longitudinal conveyor - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 4001 with one LLC outlet - LLC according to standard layout (cable directly next to the machine) - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005). Cutting head - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass against lens contamination - Online condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - Microweld - AdjustLine - Multi-sheet processing - Condition Guide - Extended machine sensor system for Condition Guide - 19" touch color screen Data transfer - USB interface - RJ-45 network connection - Central Link - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust extraction system - Machine cladding, certified viewing window, door on the right - Electric roll-up roof + Solid-state laser TruDisk 8001 with 1 LLC outlet - BrightLine fiber - High-speed cutting package - Smart Beam Control (intelligent beam monitoring) - Performance package for fusion cutting + Smart Nozzle Automation - Nozzle changer - Automatic nozzle inspection + High-speed cutting package Eco + Integrated camera 1 for process monitoring (view of the first 2.5m) + CoolLine + Copper cutting package (includes cutting data) + Brass cutting package (includes cutting data) Automation + Basic LiftMaster unit Bedpfxezv Trvo Aa Ijdh - incl. stainless steel grid (tine spacing 67mm, interchangeable tines), suction frame, stripping device, double sheet detection, symmetrical arrangement) + Loading station - for stack height up to 200mm + Separation of thin sheet metal - Available for sheet thicknesses s = 0.8-2.0mm + Unloading platform + Loading platform + Right-hand arrangement

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units Bdodpfx Aezuhbisa Ioh • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Condition: new, Year of construction: 2025, machine/vehicle number: C890, PANHANS Bandsaw Type BSB 600 Stand in modern steel construction, table top made of thick-walled, heavily ribbed cast iron, massive gray cast iron bandsaw wheels Technology: • Upper and lower PANHANS bandsaw blade guide APA II • Finely planed gray cast iron table • Table top can be swivelled up to 20° • Dynamically balanced bandsaw wheels with vulcanized rubber coverings • Fence rail can be used on the left of the saw blade • Fence profile can be folded over • Blade tension indicator • Mechanical height adjustment via handwheel with locking ratchet Bdodpfxebzmb Ho Aa Ioh • Automatic motor brake with main switch and motor protection switch Technical data: • Max. cutting height 380 mm • Max. cutting width 570 mm • Table size (W x D) 590 x 810 mm • Table height 905 mm • Wheel diameter 600 mm • Motor power 2.2 kW • Wheel speed 820 rpm • Max. saw band length 4710 mm • Suction nozzle diameter 2 x 100 mm • Machine weight 272 kg • Machine size (L x W x H) 1120 x 750 x 2125 mm Location: Available in stock, Bitburg Top exhibition price Free loading

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, spindle motor power: 30,000 W, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm • Control: Okuma OSP P300L (OSP Suite), 15" screen • Configuration: Main spindle (left) + sub-spindle (right), Y-axis, turret with driven tools (radial tool mounting) Bdjdpfsx D Rvnex Aa Ijh • Max turning diameter: 340 mm • Spindle speeds: • Left (main): 42–4,200 rpm • Right (sub): 50–6,000 rpm • Spindle motors: • Left (main): PREX 30/22 kW • Right (sub): PREX 11/7.5 kW • Special main spindle (“Big Bore” option): Ø91 mm, nose JIS A2-8, 42–4,200 rpm, PREX 30/22 kW, max torque 700 Nm • Control/monitoring functions: • Spindle orientation • Cutting load monitoring (“Load Monitor”) selectable for all axes and spindles • One-Touch IGF M-E conversational programming • Tool life monitoring: by workpiece count, by cutting engagement time, by cutting load; automatic sister-tool change or stop/alarm if no replacement • Machine options: Additional flushing for left slideway covers Additional equipment • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets • Workholding (chucks) • SMW‑Autoblok BBD250‑77 / A8, hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder VN170‑77, drawtube ID 72 with cylinder flange • Max speed: 4,000 rpm; bar capacity: Ø72 mm • Kitagawa B206 (Ø170 mm), hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder SR1146, drawtube/cylinder flange, ejector • Max speed: 6,000 rpm • Part handling • Part catcher, swing-bucket type, Ø80 × L150 mm, max 5.8 kg • Chip management • Cromar chip conveyor for LB3000 EX II C1000, slat type, right-hand discharge • Bar feeding and interfaces • Bar feeder interface (OSP P300L) • IEMCA KID 80+ bar feeder (SX – Left) for Okuma LB3000 EX II • Includes: 7" touchscreen HMI, mechanical/electrical interface kit, additional light kit, roller guide kit for round/hex bars, spindle extension, bar pusher D=26 mm, bar pusher D=15 mm, paper manuals • Accessories: Floor frame for longitudinal movement in Z; spindle liner/reduction tube Technical Specification Counter Spindle Yes Driven Tools No

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm 200 x 210 mm 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder Bdodpfehhzl Hjx Aa Ish continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 Bedpfx Aaek Egrpj Ijdh - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed Bdodpfxsucgr Is Aa Ijh andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, mileage: 900 km, power: 100 kW (135.96 HP), color: white, gearing type: mechanical, loading space length: 35,000 mm, loading space width: 17,500 mm, loading space height: 19,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, Mr. J. Ebert will be happy to assist you. Iveco Daily 35S14 V Y ASC conversion, panel van Manual 6-speed gearbox, FPT 2850.6, 2.3 l D EU6d, 100 kW (136 hp), quad-leaf transverse leaf spring suspension, front axle, leaf spring suspension, rear axle, high roof H2 [1900 mm], wheelbase 3520 mm, cargo area lights, 2 LED, extended partition to the cargo area, sliding door on the passenger side, seat belts with warning signal for driver and passenger, seats not heated, seat covers in fabric, ConnectivityBox 4G, headlights, front halogen, accident data recorder, light and rain sensor, tire pressure monitoring system (TPMS), proactive lane keeping assist (ELK), advanced emergency braking system (AEBS) with City Brake, exterior mirrors, electrically adjustable and heated, driver drowsiness warning, central locking with remote control, speed limiter 160 km/h, rear wall insulation, traffic sign recognition with intelligent speed assist (ISA), electric windows for front doors, front airbags for driver and passenger with seatbelt pretensioners, plastic steering wheel with function buttons for radio, telephone, cruise control and menu navigation, fuel tank 63 l, tires 225/65 R16, emission standard Euro 6 (2.3L LD), comfort noise insulation, loading lights outside via rear doors, comfort driver's seat, static with armrest and lumbar support, reversing camera with dynamic guide lines, without parking sensors, digital radio DAB with 7-inch touchscreen, manual air conditioning, and more. ASC conversion: ASC Exclusive Package RS 3,000, 3,520 and 3,520, ASC modification, wooden floor in 2 parts - We will gladly provide you with an offer for the trade-in of your used vehicle. - If you would like to lease or finance your vehicle, we will gladly provide you with an individual offer. - Errors and prior sale excepted! - Mr. J. Ebert will be happy to assist you by phone at: / Further information can be found on our homepage: Bdedpfx Aajzp Uc Ae Ish ... ESP, particulate filter, partition = Further information = GVWR: 3,500 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Table width: 325 mm Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Bodpfxszuyx Hj Aa Iodh Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Tigerlink download software for downloading a csv file (cutting list). Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Bdjdow U Tlzopfx Aa Ieh Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 09/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 2,250 mm, loading space width: 1,832 mm, loading space height: 1,626 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 5-seater double cab with partition * MAN TGE Individual Lions paint finish * Hill start assist * Exhaust system, EU6e (EC) * Preparation for trailer coupling * One towing eye in the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling sideways * Exterior mirrors, electrically adjustable and heated * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle view * All-wheel drive 4x4 * Emergency brake assist * Battery 520 A (92 Ah) * Rubber floor in the driver's cab * Electronic parking brake * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Differential lock on the rear axle (manually engageable, mechanical) * Immobilizer, electronic * Park steering assistant with parking aid incl. side protection * Entry handles on the rear pillars * USB Type-C data socket(s) and charging socket(s) with increased charging power * Daytime running light with assist driving light and coming/leaving home function * Electrical terminal block and KFG with ABH programming * Premium interior noise damping measures * With UNECE CS&SU * 4-cylinder diesel engine 2.0L, unit 03N.G * ACC Stop & Go * 8-speed automatic transmission for 4x4 * Glove compartment with lockable lid, illuminated * "Climatronic" air conditioning in the driver's cab * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Traffic sign recognition * Rear view camera system with dynamic guide lines * "Light Assist" high beam assistant * Leather multi-function steering wheel, heated with Tiptronic * 4 loudspeakers: 2 tweeters, 2 woofers * Country cluster "WLTP EU approval" * Digital instrument cluster * Attention and fatigue warning system * MAN SmartLink * 4-cylinder turbo diesel engine 2.0 l/130 KW (4V) BIT * Fog lights incl. cornering lights * Navigation system (Baseline) * MAN Connect * 4 light alloy wheels 6 1/2 J x 17, with 1,200 kg load capacity, in black * MAN Media Van Navigation Business (12.9 inch) * 12V socket, cup holder * Tire pressure monitoring system Bodpozp A Eljfx Aa Iodh * Tires 235/60 R17C 117/115 R, optimized for rolling resistance * Wheelbase standard 3,640 mm * Three-point automatic safety belts with height adjustment * Rear wing doors with enlarged opening angle * Heat-insulating glazing * 12V sockets in the driver's cab * Suspension seat "ergoActive" left * Suspension seat "ergoActive" right * Seatbelt monitoring, E-contact in the seatbelt buckle, driver and front passenger seat * Seat covers in fabric "Toronto Grid" * Seat heating for driver and front passenger seat, separately adjustable * 2 remote control keys * Approval as 3.5t * Start-stop system with brake energy recuperation * Side wind assist * Headlight cleaning system, windshield washer fluid level indicator, heated windshield washer nozzles * Windshield wiper intermittent operation with light and rain sensor * Keyless Go with SAFELOCK * Turning assistant * Emergency assistant (Active lane keeping assistant and Emergency Assist and Traffic Jam Assist) * Preparation for alcohol interlock * Intelligent speed assistant * With multi-function camera * Partition, with trim * Step lighting * Digital radio reception (DAB+) * Front axle (1,800 kg load capacity) * Comfort telephony with LTE and wireless charging * Tie-down eyes for securing cargo * Composite front windshield in heat-ins

Condition: new, mileage: 179 km, power: 130 kW (176.75 HP), fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: automatic, number of seats: 7, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 2,200 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, central locking, navigation system, High-roof van, mixed-use, 7-seater, new, immediately available. Permissible total weight 3,500 kg optional. Exhaust system EU6e (EC) All-wheel drive 4x4 8-speed automatic transmission for 4x4 4-cylinder turbo diesel engine, 2.0l, 130 kW, BIT common rail Start-stop system with brake energy recuperation One towing eye at the front Trailer hitch, fixed, permissible total weight 3,000 kg Fuel tank 75 l Suspension and damping package with basic stabilization Rear axle differential lock, manually switchable, mechanical Approved as a 3.5-ton vehicle Front axle load capacity 1,800 kg Front axle version 2 Wheel arch center with MAN logo 4 steel wheels 6 1/2 Jx16 with 1,200 kg load capacity, black Tires 235/65R16C 115/113R, rolling resistance optimized Tire repair kit, 12-volt compressor and tire sealant All-season tires Battery 520A (92Ah) AGM battery (520A, 92Ah) and generator Battery and generator operating voltage 12 V Immobilizer, electronic KFZ (Vehicle Registration) Electrical connection strip and KFZ preparation Alternator 140 A Air conditioning Climatic in the driver's cab Daytime running light control with auxiliary driving light and coming and leaving home function Halogen double headlights LED interior lighting concept in passenger/cargo area Fog lights incl. cornering light Exterior mirrors, electrically adjustable and heated Exterior mirror, left, convex, with integrated LED turn signal and wide-angle view Bdjdpfey Rcd Hjx Aa Ish Exterior mirror, right, convex, with integrated LED turn signal and wide-angle view High roof, painted in vehicle color Grab handles on the rear pillars Radiator grille, black, with chrome trim Hinges for rear wing doors Windshield wiper intermittent operation with light and rain sensor Lettering for type, tonnage, PS Sliding door, right Laminated front windshield with heat-absorbing glass Front bumper, gray, with painted decorative strip in vehicle color Airbag for driver and front passenger with front passenger airbag deactivation Roof rack with storage compartments, two 1-DIN compartments and reading light Sun visors, foldable and swiveling to the side Electronic parking brake Interior noise damping measures, premium Glove compartment with lockable lid, illuminated Leather multifunction steering wheel with Tiptronic 12 V socket and 2 cup holders in the instrument panel Three-point automatic seat belts with seat belt height adjustment and electric seat belt pretensioners in the front Two 12 V sockets in the driver's cab in the instrument panel Seat belt warning, electronic contact with seat belt buckle 2 remote keys Keyless-Go Comfort seat, left Double passenger seat, right, with storage compartment and foldable center backrest Seat covers in synthetic leather mesh, palladium, titanium black, pearl gray Instrument panel with special superstructures Smart TCO 2.0 with Toll-Collect preparation incl. DSRC antenna Digital instrument cluster Tire pressure monitoring system USB Type C data and charging port with increased power 4 speakers, 2 tweeters, 2 woofers MAN Media VAN Digital radio reception (DAB+) MAN Smart Link MAN Connect (call services) with OCU3 low 3-button module Comfort telephony without external antenna connection Hill start assist Multifunction camera Emergency brake assist ESP with electronic differential lock, anti-slip regulation ASR and ABS Parking assistance system, front and rear Cruise control Traffic sign recognition Rear view system with dynamic guide lines Attention and fatigue warning system Side wind assi

Condition: used, Year of construction: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: > Solid German engineering for jointing and rabbeting, including concave and convex profiling > Adjustable rabbet depth for PLANER WIDTH up to 510 mm and max. chip removal up to 8 mm > Ergonomic working position directly at the cutterblock > Panhans four-knife cutterblock with strip-type planing knives and adjustment tools > Finely planed cast iron table, total table length 2850 mm > Control panel at eye level with digital display of chip removal, current outfeed table position (neutral, concave and convex profiling), including template holder and practical tool storage > Electrically adjustable infeed table via push buttons > Concave and convex profiling adjustment on the outfeed table > Toothed table lips for noise reduction > Adjustable fence in depth and angle via a single lever, adjustable up to 45° and mounted in an extremely smooth steel guide > Anodized fence ruler > Swivel auxiliary fence type 1545 > Console for feed mechanism Bjdpszz Tznjfx Aa Isdh > Bridge guard TXF type 1570 with folding cover > Automatic star-delta starter, motor circuit breaker > Planed in our workshop Planer width: 510 mm Infeed table length: 1620 mm Outfeed table length: 1170 mm Total table length: 2850 mm Motor power: 5.5 kW / 7.5 HP Cutterblock speed: 5000 rpm Dust extraction port: 160 mm Voltage: 400 V / 50 Hz Footprint: 2850 x 1420 mm Color: Light gray RAL 7034 and violet-blue RAL 5000 Weight: approx. 1050 kg Includes: Full steel Tersa cutterblock > Automatic motor brake Location: Flörsheim Availability: Short notice

Condition: used, Year of construction: 2002, machine/vehicle number: 6243, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Base machine / Travel ranges: X-axis machine stand 5,000 mm, Y-axis spindle head slide 2,100 mm, Z-axis spindle head 1,500 mm. Machine stand: Compact, torsion-resistant welded construction with hardened flat guide rails and telescopic steel covers against chips and coolant. Spindle head slide: Cast iron design with hydraulic weight compensation, guided via combined roller/sliding guides. Machine bed: Flat bed design with approximately 1,200 mm guide rail width and roller compact guides for high precision. Automatic universal milling head: CNC-swiveling milling head mounting 340 x 1°, Hirth gearing approximately 125 kN; milling head 180 x 1°, approximately 100 kN; milling spindle with hydromechanical tool quick-change system, clamping force approximately 25 kN; tool mounting SK 50, DIN 69871. Main drive: 37 kW at 100% ED, 53 kW at 40% ED; externally ventilated AC motor, 2-stage gearbox with automatic shifting; speed 22–4,000 1/min. Feed drives: Digital AC single drives; X/Y: 2–12,000 mm/min, Z: 2–15,000 mm/min. Control / Measuring systems: Central operation via Heidenhain TNC 430 M. Direct, non-contact linear measuring systems. Electrical system: EN 60204 / VBG 4, 400/230 V ±10%, 3 phases, 50 Hz, 24 V control voltage; connected load approximately 80 kVA. Control cabinet IP54, main motor IP55. Lubrication: Main gearbox/milling head drive oil circulation lubrication; main spindle grease long-life lubrication; guides/ball screws pulse central lubrication. Coolant: Internal/external coolant supply with paper band filter. Max. 50 l/min at 10 bar or 47 l/min at 16 bar; tank 500 l. Coolant/air switching. Oil cooler for temperature stabilization and increased manufacturing accuracy. Leveling system: Electromechanical via 2 vertical ball screws with separate drives, measuring systems and CNC axes. Work platform: Moving in the X-direction, with CNC control panel; electrically secured door with viewing window. Pick-up station: Bsdpez Dvycjfx Aa Iodh 10 tools; max. tool weight 25 kg, length 400 mm, Ø 125 mm, with free neighboring spaces Ø 250 mm. Clamping plate: 3,500 x 3,000 mm; T-slots 22 H12 DIN 650, spacing 250 mm; clamping surface accuracy grade 1 DIN 876. CNC rotary table: Clamping surface 1,250 x 1,600 mm / Ø 1,800 mm; Hirth division 360 x 1°; 6 longitudinal slots 22 H12, 2 guide slots 22 H7; T-slot spacing 160 mm; centering sleeve Ø100 H7 x 20 mm; max. 5 1/min; tilting moment 85,000 Nm; tangential moment 120,000 Nm; table load max. 11,500 kg. Additional equipment: Oriented spindle holder 360 x 1°; hinged band chip conveyor for X = 5,000 mm, feed width approximately 350 mm, discharge height approximately 1,250 mm; 3D wireless measuring probe; electronic handwheel HR 410 for 3 axes; pendulum machining for 2 work areas with monitored safety zones; manually movable splash guard. Collision monitoring: Brankamp CMS with piezoelectric strain gauge; if the process limit is exceeded, the axes are braked and the machine is switched off. Paint finish: Machine/control cabinet RAL 7035, milling head/spindle head RAL 5021; DD structural paint, semi-gloss, oil- and alkali-resistant. Power connection: 400 V, 3 phases, 50 Hz, 80 kVA, 160 A slow-blow; compressed air 4–6 bar, connection G 1/4. CE-relevant environmental protection to be provided on site; adapter plates for chip/coolant return are not included. Coordinate data: Y 730.0124. Documentation: Operating manual SHW-UF6L and Heidenhain TNC 430.

Condition: used, mileage: 109,014 km, power: 265 kW (360.30 HP), first registration: 10/2025, fuel type: diesel, number of seats: 41, gearing type: automatic, axle configuration: 4x2, empty load weight: 12,200 kg, maximum load weight: 5,600 kg, overall weight: 17,800 kg, emission class: euro6, color: violet, suspension: air, wheelbase: 6,030 mm, Year of construction: 2025, Equipment: ABS, air conditioning, bathroom, cruise control, parking heater, Color: Traffic Purple RAL 4006, unladen weight: 12,200 kg, permissible total weight: 17,800 kg, 35 standing places, tire size: 275/70 R22.5, axle 1: , axle 2: , air suspension, air conditioning for passenger compartment: TK Athenia S805 (32 kW) with heating function, digital destination display: Vianova 3-sided, auxiliary heater: 35 kW, programmable with reinforced water pump, HVO compatible (Spheros), air conditioning for driver's area, stop request button, wheelchair space, stroller space, multi-function steering wheel, electronic stability program (ESP), fog lights, raising/lowering, kneeling function, multi-function display, power steering: steering system ZF 8098 with integrated power steering, tire pressure monitoring system, floor covering (rubber): non-slip and abrasion-resistant, tinted windows, exterior mirrors: electric and heated, digital tachograph, electronic braking system (EBS), station brake, roof hatch, retarder, twin tires, reversing camera: monitor (color display, 7 inches, in the dashboard), sun visor: electrically adjustable for the windshield, manually adjustable for the side window, toilet, speed limiter: 100 km/h, microphone for driver & tour guide, wheelchair ramp, blind spot assist, IVECO Bus Crossway LE 12m ADAS, engine: Cursor 9 with engine output of 265 kW/360 hp, 100 km/h automatic transmission Voith NXT 867.8 and retarder, 41 passenger seats, including 2 folding seats, up to 35 standing places, toilet, door 1: inward-swinging door, 1000 mm, single-leaf, door 2: outward-swinging door, 1200 mm, double-leaf, roof-mounted air conditioning unit with heating function, auxiliary heater, WLAN, destination displays Vianova 3-sided, IBIS protocol, double USB connection for each row of seats, mounted on the side wall, video surveillance system. Bedpfxez Ecuco Aa Iodh