Used Granite Surface Plate for sale (17,138)

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW Klodpfxsyuzcue Aaljp weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: ready for operation (used), sheet width 1540 mm plate thickness 5.00 mm pre-bending 4.25 - 6.00 mm diameter of upper rolls 150 mm voltage 400 V total power requirement 4.0 kW weight of the machine ca. 1630 kg range L-W-H 2520 x 890 x 1070 mm Features: - Robust electric three-roll bending machine Kledpfx Aajyuzcbslop - Drive via spur gear brake motor + reduction gear - Asymmetrical roll arrangement - Electric adjustment of the rear roll * with automatic/electric shut-off * Minimum/maximum travel adjustment possible - Rotating control panel - Swiveling upper roll - Conical bends by tilting the lower and rear rolls - 1x freely movable double foot switch * Right/left rotation of the rolls - Manual adjustment of the lower roll via handwheel - With analog position indicator - Electric safety device (cable) - Original operating instructions * Further technical data for steel 400 N/mm²: - 1.5 x upper roll diameter with bending .. 4.25 mm - 1.5 x upper roll diameter without bending .. 5.00 mm - 5 x upper roll diameter with Bending angle .. 6.00 mm

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with adjustable feet -Length: 7990 mm -Width: 2480 mm -Height: 350 mm -Sheet thickness: 30 mm -Quantity: 2 mounting plates available Price: per piece Kjdpjyvfliefx Aalslp -Transport dimensions: 7990/2480/H350 mm / 1200/800/1000 mm/piece -Weight: 9500 kg/piece

Condition: ready for operation (used), empty load weight: 39,000 kg, Thompson X:3000 - Y: 1000mm Worklength with magnetic table: 3000 mm Grindingwidth: 1000 mm Ksdpfjyriwhsx Aaljlp Longitudinal travel X-axis (autom.): 3000 mm Travel Z-axis (autom.): 1000 mm Dimensions of the table: 3090 x 920 mm Max dia grindingstone: 450 x 150 mm Motorpower: 16,5 kW

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs, on a solid base cabinet Kedpfx Asyu Rzgsaljlp -Length: 2000 mm -Width: 1420 mm -Plate: with supporting ribs, plate thickness 35 mm -Base cabinet: 6 cabinet doors / shelves (see photos) -Overall dimensions: 2000/1420/H920 mm -Weight: 1080 kg

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, grinding length: 400 mm, grinding width: 150 mm, JUNG JF 415 Jung JF 415 Surface Grinding Machine with Flanges and Coolant Belt Filter * Table length: 400 mm * Table width: 150 mm * Maximum grinding length: 400 mm * Maximum grinding width: 150 mm * Maximum workpiece weight: 75 kg * Distance spindle to table: 400 mm * Table speed: 1–24 m/min * Grinding wheel diameter: 25 mm Klodeytfbfjpfx Aalep * Spindle speed: 900 – 4500 rpm * Heidenhain digital readout * Year of manufacture: 1990, machine no.: 1566

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm Klsdpfx Aajwgnz Ajlsp workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Klodjnxi Uuopfx Aaljp Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. Kledpfenxi R Usx Aalsp A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Handle hole motor Faceplate motor Lubrication system Extraction connection D 80/100 mm Klsdpjyuty Sefx Aalep Space requirements approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Storage location: at customer's site Sale as is, as inspected, without guarantee or warranty

Condition: used, Year of construction: 1988, Year 1988 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale! Kedpfx Asxmk Euealjlp

Condition: used, Year of construction: 2021, max. travel distances (transverse x longitudinal) 280 x 600 mm distance spindle /table 500 mm Grinding surface of table 250 x 500 mm Grinding Wheel Dimension 355 x 25 x 127 mm grinding wheel turning speeds 1.500 / 1.800 mm power requirement 2,2 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Ksdexp R D Nepfx Aalelp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1997, grinding length 880 mm grinding width 510 mm Control Siemens max. turning speeds 4.300 min/-1 grinding wheel diameter 210 - 400 mm grinding wheel width 100 mm total power requirement 26 kW weight of the machine ca. 7,5 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well Kedpfx Aswwl N Soalelp as subject to prior sale!

Condition: used, Type Amb 6/4 VAI-Z In our assessment, the machine is in good used condition and can be inspected under power by appointment. Kedpfoxzuyrjx Aalolp Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), empty load weight: 19,000 kg, nominal power: 33.526 kW (45.58 HP), Boven- en onderrol worden aangedreven (planetaire tandwielkast) Conische buiging Automatische gelijktijdige balancering Kljdpfxjx Dd Hye Aalop Onderste rol excentrische balk Number of rolls: 4 rolls - 2 roll driven Roll capacity cold: 3100 x 32 mm Roll dia upside: 410 mm Dia under roll - side rolls: 370 - 300 mm

Condition: ready for operation (used), Vermogen slijpsteen: 15 kWt Besturing: Siemens Sinumerik 840 C Siemens drive: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1270 mm Grindingwidth: 610 mm Longitudinal travel X-axis (autom.): 1310 mm Cross-travel Y-axis (autom.): 565 mm Travel Z-axis (autom.): 470 mm Dimensions of the table: 1215 x 500 mm Kledpfxoxl Hxhe Aalep Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 400 x 100 x 127 mm Spindlespeeds: rpm Motorpower: 30 / 47 kWt Tension needed: 380V - 50Hz Cooling system: yes

Condition: ready for operation (used), empty load weight: 3,300 kg, additional equipment features: Diamant tools, + afzuiging + koelmelk groep Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Klodexp Skdopfx Aaljp Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table: 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Tension needed: 400V Cooling system: yes

Condition: ready for operation (used), Elb SWE 6 VA II Worklenth without magnetic table: 600 mm Grindingwidth: 400 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 400 mm Travel Z-axis (autom.): 450 mm Dimensions of the table: 1100 x 450 mm Dimensions magnetic table: 700 x 200 mm Kljdpfx Aaex Dd Idjlsp Max dia grindingstone: 300x50x76 mm Spindlespeeds: 1400 x 1800 rpm Motorpower: 5.5 kW, total 13 kW Tension needed: 400V

Condition: ready for operation (used), total length: 2,700 mm, total width: 750 mm, total height: 1,000 mm, empty load weight: 1,420 kg, nominal power: 2.2 kW (2.99 HP), conische buiging met geharde rollen met gemotoriseerde backroll Number of rolls: 3x Roll capacity cold: 1550 x 6 mm Roll dia upside: 140 mm Kledpfx Aexzvp Usalop

Condition: ready for operation (used), Directe aandrijving; 2 aangedreven rollen Conische buiging Geen fundering nodig Automatische drukbalans tussen boven- en onderrol Automatische smering Kjdpox Enfxjfx Aaljlp De onderste rol kan worden versteld door middel van druk of positie. Number of rolls: 4 Roll capacity cold: 3100 x 20 mm Roll dia upside: 370 mm Pre-bending: Yes

Condition: ready for operation (used), additional equipment features: yes, Besturing: Siemens Sinumerik 840 C Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1230 mm Kjdpfsxuwxwex Aalelp Worklenth without magnetic table: 1260 mm Grindingwidth: 600 mm Longitudinal travel X-axis (autom.): 1260 mm Cross-travel Y-axis (autom.): 630 mm Travel Z-axis (autom.): 477 mm Dimensions of the table: 1215 x 500 mm Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 406 x 50 x 127 mm Spindlespeeds: rpm Motorpower: 22 kW Cooling system: yes

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results thanks to up to 32 storable programs. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". As space-saving as a pallet wrapper with a horseshoe plate and as robust as a closed system system - these are the advantages of this machine in a nutshell! With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. The programs also allow you to set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 500 kg, this model is designed for loads of up to 1200 kg. Our Profiline LP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. Kedpfxeyucy Uo Aaljlp This model is our recommendation if you have limited space but require a professional & robust pallet wrapper that can be optimally adapted to your needs. adaptable to your needs Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2025, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: You will receive a 24-month warranty with this machine. On request, we can also offer you a suitable loading ramp, a photoelectric cell for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby fully eliminating the “human factor.” Kedpsyucynjfx Aalolp As space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system – these are the advantages of this machine, put in a nutshell! The electromagnetic brake allows you to precisely store the film tension for each program step (foot wrapping, upwards wrapping, head wrapping, downwards wrapping). Within the parameters of each program, you can also adjust the speed of the film carriage and turntable. Head wraps, foot wraps, and film overlap at the pallet end can each be programmed individually. This way, you can store customized programs for every packing scheme to achieve optimal wrapping results. Programs can be password-protected so that operators can only select from pre-set programs. Weighing 500 kg, this model is designed for loads up to 1200 kg. Our Profiline LP comes with a 1650 mm turntable as standard and can wrap pallets up to 2500 mm in height. Automatic pallet detection (via photoelectric cell) is standard, as are adjustable top and bottom wraps. This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be optimally adapted to your needs. Would you like a higher mast, film pre-stretch, or an automatic film cut-off? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with options perfectly matched to your requirements. About us: We believe that business is made between people! A supplier delivers the goods you order – a partner does more: they help you find the best products, support you in achieving your goals, and stand by you in case of problems and challenges! That is our conviction. For over 40 years and through four generations, we have been the partner of mid-sized companies for all matters concerning 'stretching and sealing.' Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: excellent (used), Year of construction: 2019, ■ V310 plate processing machine (including 2 gantry beams of 5.500mm and side trucks) ■ This V310 plate processing machine is capable of processing plates up to 3.000mm x 34.000mm ■ X-rail (37.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table with drilling supports (3.800mm x 35.360mm, 1 pcs, suitable for ≥ 350A cutting) ■ Donaldson fume extraction unit DFPRO12 - 200L (2 pcs) ■ Gantry beam 1 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) Klodpsym Nf Isfx Aalep ■ Safety devices (light curtain, safety bumpers) Gantry beam 2 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Driven suspension (1 pcs, servo motor driven) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers)

Condition: good (used), Cup wheel diameter: 175 mm Table clamping surface: 150 x 250 mm Max. installation height without/with magnetic chuck: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Required space approx.: 800 x 600 x 1600 mm Ksdpfxoyvfq Eo Aalelp Weight approx.: 200 kg