Used Granite Measuring Plate for sale (17,602)

Condition: used, functionality: fully functional, total width: 1,000 mm, total length: 1,600 mm, plate height: 300 mm, Granite Plate (seems JFA) - Dimensions 1600x1000x200mm - Quality appx. Class 1 or better (will be checked) - T14 guideway - granit guide on the back side - with steel cabinet - light signs of wear - 2 small damages (apxx. 1 and 2cm², 2mm deep) in the middle Ffodpexk U Uzjfx Afnju On demand (€ 700,--) - tailsstock 300mm height - stand for dial/probe

Condition: excellent (used), functionality: fully functional, Granite Plate Ffjdpfstnkdcex Afnju - Dimensions 1400x250x160mm - Quality appx. Class 0 or better (will be checked) - frame on demand - with mounted pneumatic press

Condition: excellent (used), functionality: fully functional, Granite Plate - Dimensions 1200x910x200mm Ffsdpfxetcrk Ts Afnju - Quality appx. Class 0 or better (will be checked) - incl. different taper inserts - frame on demand Was a former base for a Zeiss rotary table RT05/800

Condition: excellent (used), functionality: fully functional, total height: 180 mm, total width: 800 mm, total length: 1,200 mm, Granite Plate - Dimensions 1200x800x180mm - Quality appx. Class 0 or better (will be checked) Ffsdjt Rfmnspfx Afneu - incl. 3x ball feet (frame on demand) - incl. stainless steel angle

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Granite Plate (from former Mitutoyo CMM) - Dimensions 880 (730) x 870 x 160mm - Quality class appx.1 (flatness = 5µm = Grade 0) (will be checked on demand) Fjdpjrby H Dofx Afnofu - incl. M8 threads - incl linear guideway - with steel frame (working height 750mm)

Condition: excellent (used), functionality: fully functional, total height: 500 mm, total width: 300 mm, total length: 5,500 mm, overall weight: 2,200 kg, Granite Beam (Öelze) - Dimensions 5500 x 300 x 500mm - Quality class 00 flatness = 11µm (2µm/1000mm) - measuring protocol on demand - incl T-slot on rear side, energy chain on the front side - with granit feet (working height appx. 850mm) Fedpjr Ellrsfx Afnsfu incl. air bearing sliders for measurement of straightness and so on. Incl digital readout (2x)

Condition: used, functionality: fully functional, total width: 1,500 mm, total length: 2,000 mm, plate height: 300 mm, Granite Plate (seems JFA) - Dimensions 2000x1500x300mm Fsdpfoul U N Ujx Afnefu - Quality appx. Class 1 or better (will be checked) - with 5 legs - light signs of wear (looks worse than it is) - some very small cuts

Condition: good (used), total height: 80 mm, total width: 450 mm, total length: 650 mm, Granite Plate (from former Mahr surftest) - Dimensions 650 x 450 x 80mm - Quality class appx.1 (will be checked on demand) - incl. some holes (column) - inserted t-slide - for table use Ffodpfxovmd Hco Afneu

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Granite Plate - Dimensions 1450x2000x400mm - Quality appx. Class 0 (will be checked) - with or without corss beam - incl. different taper inserts Ffsdpfx Afsgrhhtsnou - frame with antivibration units Was a CMM base for a Zeiss FC600

Condition: ready for operation (used), Year of construction: 1990, functionality: limited functionality, total height: 150 mm, total width: 750 mm, total length: 1,000 mm, Granite Plate (from former Mitutoyo CMM) Fodpfx Aswlvuhsfnjfu - Dimensions 1000 x 750 x 155mm - Quality class appx.1 - incl. M8 threads - without steel frame

Condition: used, Year of construction: 2002, functionality: fully functional, total height: 850 mm, total width: 1,000 mm, total length: 1,000 mm, overall weight: 1,000 kg, plate height: 160 mm, Granite Plate - Dimensions 1000x1000x160mm - Quality appx. Class 1 or 0 (will be checked) - incl. steel frame and cabinet - on demand including roof construction Fsdpfjvki S Esx Afnjfu

Condition: used, SIEGFRIED WEYRAUCH Gemmingen straightening and welding plate Heavy ribbed cast steel/grey cast iron Former marking and measuring plate Heavy-duty straightening plate Length: 1000 mm Width: 800 mm Thickness: 28/125 mm Working height: approx. 850 mm Fsdpfx Afsd N H Dbenefu - Feet with leveling screws for plate alignment Weight: 370 kg Good surface condition

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Fodpfxjxv A T Ne Afnjfu Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Ffjdpewnfz Nofx Afnsu Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional Ffodpfxsw Hhwws Afneu

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T Fodpfxjh Auahe Afnefu

Condition: used, Cast iron bed Length: 2300 mm Fsdpfx Aswtc Hgsfnjfu Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Fjdpfx Aswlhd Usfnsfu Weight: approx 4,5 T

Condition: good (used), Marble plate Ffodeig Hu Njpfx Afnsu Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T Ffjdpfx Aowlhfljfnsu

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm Ffedpewk Rlxefx Afnju height: 100cm width: 65cm weight: 240kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06-00376, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 150 mm, control type: CNC control, TECHNICAL DETAILS Measuring range X-axis: 400 mm Measuring range Y-axis: 400 mm Measuring range Z-axis: 150 mm Measurement accuracy: Length measurement deviation up to approx. 1.5 µm MACHINE DETAILS Control: CNC Software: WinWerth, version 8.40 or higher Tool holder / probe: Renishaw, MK 2 Probe system: Renishaw Probe Interface PI 200 Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A EQUIPMENT Granite machine with measuring glass and cover CNC control with scope controller Renishaw probe (various probe inserts included) PC workstation User manuals (WinWerth) Calibration and test reports Folder with machine and measurement room documentation Software and calibration data carriers (CD/DVD) Control cabinet integrated, main switch available Ffedpfeyft Tmox Afnou

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 09233-K06P27, working width: 3,100 mm, stroke rate (max.): 10 1/min, sheet thickness (max.): 16 mm, distance between stands: 3,400 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,100 mm Fsdpfx Asygw Epefnofu Sheet thickness: 16 mm Frame gap: 3,400 mm Shearing angle: 2.5° Working height: 900 mm Backgauge: 1,000 mm Hold-downs: 14 units Strokes per minute: 10 MACHINE DETAILS Control: CYBELEC CybTouch 6 Total power requirement: 30 kW Dimensions & Weight Space required: approx. 4,150 x 2,360 x 2,450 mm Machine weight: approx. 16,400 kg Oil capacity: 500 l EQUIPMENT Electric backgauge 1,000 mm Electric cutting gap adjustment Electric cutting angle adjustment Cutting length limitation Light barrier at rear of machine Finger guard at front Ball rollers in support table 1x side stop 2x front support arms Foot switch

Condition: ready for operation (used), functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, total length: 900 mm, total height: 1,500 mm, overall weight: 32 kg, TECHNICAL DETAILS Measuring Range X-Axis: 200 mm Measuring Range Y-Axis: 200 mm Measuring Range Z: Height measurement via autofocus Measuring Method: Optical / Non-contact Measuring Accuracy: ±2 µm Repeatability: Very high, operator-independent MACHINE DETAILS Camera: High-resolution CCD camera Illumination: Incident / Transmitted / Contour lighting Measuring Time: A few seconds per component Dimensions & Weight Dimensions: 900 mm × 500 mm × 1,500 mm Weight: 32 kg EQUIPMENT Ffsdpfx Afeyh A Ddonou Length, angle, radius, and diameter measurement Contour and shape measurement Comparative measurement (OK/NOK) Automatic dimension recognition Software: KEYENCE IM software

Condition: used, Year of construction: 1998, DEA Scirocca 201310 Coordinate Measuring Machine, Granite Bed Area 2900mm x 1250mm between Columns, Hexagon PC-DMIS CAD ++ Software, Renishaw PH10T Probe Head, Joystick Control. S/No. 00157 (1998) Ffedsyhdlrepfx Afnsu Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.