Used Gb for sale (1,127)

Condition: used, Year of construction: 2012, operating hours: 4,417 h, Serial number: nsue55bcncln0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21194 Kdedjw Srl Uepfx Ag Uog Specifications:• 2012 model• 4417 hours• 31.5 kW• 5290 kg• Rubber tracks• Blade• Machine width: 196 cm• Swing boom• Slight leak around boom cylinder• Digging bucket• Grading bucket• Demolition claw• Rototilt• Lights• A/C• Radio• Ready for delivery Description:We have a 2012 New Holland E55B excavator with digging bucket, grading bucket, demolition claw, and rototilt for sale.There is a slight leak around the boom cylinder. Other than that, the machine works as it should according to the owner.It comes with a good amount of equipment as listed above.Ready for delivery Hours: 4417 Own weight: 5290 Width: 196 Kw: 31.5 Model: E55B

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm 200 x 210 mm 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts Ksdpfxohhzl Hj Ag Usdg best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Condition: new, cutting diameter 280 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm 280 mm 250 mm 350 x 200 mm 240 mm 220 mm 230 x 220 mm 170 mm 150 mm Kdjdpfxeivuqte Ag Usg 170 x 100 mm saw tape speed 37 + 74 m/min total power requirement 1,8 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,5 x 1,7 x 2,0 m

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm Ksdpfx Aou Dbvtjg Ujdg 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: new, cutting diameter 255 mm saw band length 2765 x 27 x 0,9 mm table height 950 mm 18-110 m/min 255 mm capacity 90 degrees: square 240 mm capacity 90 degrees: flat 300 x 180 mm capacity 45 degrees: round 210 mm capacity 45 degrees: square 190 mm capacity 45 degrees: flat 200 x 160 mm capacity 60 degrees: round 135 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 130 x 100 mm capacity 45 degrees: round rechts 180 mm capacity 45 degrees: square rechts 160 mm capacity 45 degrees: flat rechts 180 x 100 mm 1,5/1,8 kW 350 kg 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position Kjdpjt I D Tujfx Ag Uodg changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system

Condition: new, cutting diameter 250 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 290 x 210 mm capacity 45 degrees: round 220 mm capacity 45 degrees: flat 210 x 200 mm Kjdpjxaauxefx Ag Usdg capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: round 140 mm capacity 60 degrees: square 130 x 130 mm capacity 60 degrees: flat 140 x 130 mm dimensions of saw-band 2965 x 27 x 0,9 mm cutting speed 35 + 70 m/min work height max. 940 mm total power requirement 1,1 / 1,3 kW weight of the machine ca. 290 kg. range L-W-H 1250 x 1500 x 1700 mm Equipment: - compact / robust manual band saw (INDUSTRY) * for sawing solid material and profiles - ball bearing support table for miter cuts left 60° to right 45° * durable + easy miter adjustment - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manually adjustable quick-release vice * including quick-release lever - machine base including built-in automatic cooling - electrical display and monitoring of the machine - operating instructions BERG SCHMID Auto-Cut system = 3-stage system 1. automatic lowering & automatic saw cut 2. manual operation - lowering + saw cut 3. high-speed lowering of the saw frame - without saw cut

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should Kjdpoxabacsfx Ag Usdg this universal current sensitive and not below 300 mA be executed.

Condition: new, cutting diameter 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 150 x 150 mm capacity 45 degrees: flat 150 x 210 mm Kdsdoxabbgjpfx Ag Ujg capacity 60 degrees: round 90,0 mm capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: flat 90 x 100 mm dimensions of saw-band 2455 x 27 x 0,9 mm cutting speed 35 + 70 m/min work height max. ca. 900 mm total power requirement 1,2 kW weight 240 kg range L-W-H 870 x 1550 x 1740 mm Equipment: - compact / robust manual band saw (HOBBY / INDUSTRY) * for sawing solid material and profiles - miter cuts up to 60° left possible - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manual quick-release vice, including quick-release lever - machine base - coolant system - operating instructions BERG SCHMID Auto-Cut system = 3-stage system 1. automatic lowering & automatic saw cut 2. manual operation - lowering + saw cut 3. high-speed lowering of the saw frame - without saw cut

Condition: used, empty load weight: 12,640 kg, maximum load weight: 28,360 kg, overall weight: 41,000 kg, first registration: 06/2023, next inspection (TÜV): 06/2026, loading space length: 9,900 mm, loading space width: 2,550 mm, loading space height: 910 mm, loading space volume: 22 m³, suspension: air, tire size: 235/75 R 17.5, color: other, gearing type: other, front tire size: 235/75 R 17.5, driver cabin: other, emission class: none, Available immediately for rental periods of 4 weeks or more - Contact O. Schinke o. Platform length 3,800 mm, loading length 9,400 mm, loading width 2,550 mm, ramp incline 1,300 mm, Rear loading ramps 2,950 x 1,700 x 900 mm ramp angle approx. 11 degrees, hydraulic ramp jack, ramp hydraulically movable, Grease aid, smart board, loading bed extension, Spare wheel holder, including spare wheel, storage box, 1 support at the front: telescopic support aluminum leg for uncoupling, 2 foldable support legs at the rear with spring holder, To operate the hydraulic components, a corresponding truck hydraulic system with forward and reverse air is required (not included in delivery) also available as a rental vehicle in the long term! Contact us - we will make you our individual offer.   * ABS * Steering knuckle on the 2nd and 3rd axle * Side impact protection * Rubber-metal pads on the loading ramps * Plastic tool box * Single lift axle * Platform side walls * Hydraulic ramp jack * Hydraulically movable ramps * Spare wheel holder * Rotating beacon * SAF axles * Smart board * Supports * Warning package * Central lubrication system Kjdpoxwk Evofx Ag Usdg We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. Information about accessories is provided without guarantee, subject to changes, prior sale or errors. We offer and strongly recommend an inspection and test so that the buyer does not have any false ideas about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   We take care of all formalities and hand over the vehicle with the desired transfer license plates for an additional charge. Some of the images have been edited and are for initial viewing only. If you are interested, please contact us and request current images.

Condition: used, mileage: 161,117 km, power: 200 kW (271.92 HP), first registration: 01/1997, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, total width: 2,500 mm, total height: 3,750 mm, Mercedes-Benz 2527 suction excavator. RSP 6x4 Suspension: leaf-leaf Wheelbase: 4.30 m Reschwitz suction excavator Type: FM8SK-1500 Year 1997 6588 operating hours + remote control Kjdpfx Agsqf U Ufj Uedg Equipment: - Engine brake - Speedometer disk - M.F.H. - Radio - Sunroof - Sun visor - Heated seats - Heated exterior mirrors - Electric window lift - Trailer coupling (ABS power connection) We are also happy to support you in the area of financing/leasing with our partners. All information without guarantee. Errors and omissions excepted.

Condition: good (used), Controller, memory module, PLC controller, analog assembly, analog module, analog output, interface module, electronic modules, PLC controller, analog input module -Manufacturer: Siemens, Simatic S7 Analog Input Module -Type: 6ES7 134-6GB00-0BA1 -Number: 4 modules available -Price: per piece -Dimensions: 70/15/H55 mm -Weight: 0.1 kg/pc Kdodpfx Agex R Smws Ujg

Condition: used, mileage: 100 km, power: 100 kW (135.96 HP), first registration: 12/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 6,200 mm, total width: 2,070 mm, total height: 2,480 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, General information Number of doors: 3 Technical information Kdsdpfx Agox Thtfo Ujg Number of cylinders: 4 Engine capacity: 2.299 cc Max. front axle load: 1850 kg Max. rear axle load: 2100 kg Weights Empty weight: 2.043 kg Carrying capacity: 1.457 kg GVW: 3.500 kg Maintenance APK (MOT): tested until 12/2027 Financial information VAT/margin: VAT qualifying Loading space completely finished with sliding door to loading space + scaffolding.

Condition: used, mileage: 182,102 km, power: 162 kW (220.26 HP), first registration: 10/2001, overall weight: 14,500 kg, fuel type: diesel, color: black, axle configuration: 2 axles, gearing type: mechanical, total width: 2,450 mm, total height: 3,150 mm, MAN Bucher Schörling Sweeper----* Rear-view camera * Leaf spring suspension ----* Tyres: 275/80R22.5 * Overall length: 6300 mm * Kerb weight: 9 kg * Payload: 5,330 kg * Fuel tank: 400 litres * Inspection due: Subject to errors and prior sale Vehicle number: 5662 Kdedjvhv Eajpfx Ag Ujg WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, Year of construction: 2016, operating hours: 232 h, * Engine power: 55.4 kW * Weight: 8,500 kg * Operating hours: 216 h * Model: CA1500D -----Internal vehicle number: 10613----Subject to errors and prior sale. WhatsApp support available! If you have questions about the vehicle or would like further information, feel free to contact us conveniently via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic Kdodpfx Agjvyx Eyj Ueg

Condition: used, mileage: 20,224 km, first registration: 01/2004, fuel type: diesel, axle configuration: 2 axles, gearing type: automatic, * Shunting vehicle * BDF * Fifth wheel * CD/USB radio * Hydrostat Kdedpjxwtgcefx Ag Ueg ----Internal vehicle number: 10-----Errors and prior sale excepted WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: > automatic loading including roller block and Sheeter for additional roll production > Screen controls Kdedpfxeft S Eaj Ag Uog > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, demoulding, table vacuum > 8-fold air-blowers D06 > Lot control at the table > Ball table for easier mold changes > pneumatic blow box ventilation > Plate loading with centering table > Various clamping frames / window panels incl. We offer the machine in the following technical state: 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Type: MS9-LFR-3/4-D7-EUM-AG-BAR-AS 562531 -Quantity: 1x filter control valve available Kjdpsx Ryhijfx Ag Uedg -Dimensions: 440/115/H205 mm -Weight: 3 kg

Condition: used, Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW ABW, tapping chuck holder MK3 -Type: GB3 -Bore: Ø 24 mm -Dimensions: Ø 80 x 264 mm Ksdporvlfcjfx Ag Uodg -Weight: 3.7 kg

Condition: good (used), thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK2 2 pieces -Type: GB2a -Bore: 1x Ø8 mm / 1x Ø5 mm -Delivery/Price: complete -Transport dimensions: 220/130/H63 mm -Weight: 3.0 kg Kedpfx Aouu U T Ssg Uedg

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 240 mm Kdodpfjb A Ipmox Ag Uog -Width: 80 mm -Inner diameter: 110 mm -Weight 17 kg

Condition: excellent (used), Row limit switch, push button, limit switch, cam limit switch Kdsdpexx Sy Rofx Ag Usg -Condition: unused -Number: 25x row limit switches available -Price: per piece -Dimensions: 120/85/H70 mm -Weight: 0.8 kg

Condition: excellent (used), two-armed drill, rotary drill, magnetic drill -Recording: MK3 Ksdpfsb E Aq Sjx Ag Ujdg -Nominal consumption: 1100 W -Connection: 380 volts -Max. Drill diameter: 32 mm -Dimensions: 550/560/H150 mm -Weight: 17 kg

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck Kdsdpec S D H Iofx Ag Uog -Handover in its current condition as inspected -Thread cutting chuck without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 -Quantity: 1x threading chuck available -Weight: 13 kg

Condition: good (used), Geared motor, electric motor, three-phase motor Kedsih S Ncspfx Ag Uodg -Manufacturer: Weg, geared motor type ODGB 512/265 -Speed: approx. 150 rpm -Power: 0.13 kW -Design: B3 angle -Shaft: Ø 15x20 / 14 x15 mm -Dimensions: 265/140/H120 mm -Weight: 4.7 kg

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: ABW, Thread cutting chuck MK3 mount -Type: GB3a -Cutting capacity: M12 -M24 -Bore: Ø 33 mm -Number: 2x cutting chucks available -Price: per piece -Dimensions: Ø 80 x 257 mm -Weight: 3.7 kg/pc. Kjdpfxervld Hs Ag Usdg