Used Gas Forge Furnace for sale (3,602)

Condition: used, This listing is for the Restek Single Position Base Plate Gas Filter Kit + SGT Gas Filter Kit The unit is in full working condition and is ready for immediate use The Restek Single Position Base Plate Gas Filter Kit is a modular system designed for gas purification in laboratory applications, particularly in gas chromatography (GC) and mass spectrometry (MS) systems. Cedpfsxv Dk Njx Afnopu Key Features Baseplate Design: The single-position baseplate (catalogue number 22025) is constructed from brass and measures 10.2 × 10.2 × 4.8 cm. It is compatible with all standalone Super Clean gas filters Filter Cartridges: Restek offers various filter cartridges, such as the triple filter that removes oxygen, moisture, and hydrocarbon impurities, and the fuel gas filter designed for moisture and hydrocarbon removal. Fitting Compatibility: The baseplate accepts 1/8" tubing. To adapt to 1/4" tubing, 1/8" to 1/4" tube end reducers are available. Material Options: End fittings are available in brass or stainless steel, allowing for customization based on application requirements Restek SGT Superclean Gas Filter Kit The Restek SGT Superclean Gas Filter Kit is a high-purity gas purification system designed to remove contaminants such as moisture, oxygen, and hydrocarbons from carrier and fuel gases used in gas chromatography (GC) and mass spectrometry (MS). This kit is particularly beneficial for applications requiring ultra-pure gas supplies to ensure accurate and reliable analytical results. Key Features High-Purity Output: Delivers gas purity levels exceeding 99.9999%, depending on the incoming gas quality and flow rate. Versatile Compatibility: Compatible with various gas types, including inert carrier gases, air, hydrogen, and helium. Quick-Connect Design: Features a user-friendly quick-connect system for easy and leak-free filter cartridge changes. Durable Construction: Constructed with a glass interior to prevent diffusion and a polycarbonate exterior for safety. Visual Indicator: Each filter cartridge includes an easy-to-read color change indicator to signal when replacement is necessary.

Condition: used, This listing is for a Magellan Instruments Tandem Pro Gas Analyser. The unit is in full working condition and is ready for immediate release. The Magellan Instruments Tandem Pro Gas Analyzer is a self-contained O2 & CO2 gas analyzer. The PRO system comes with an internal gas pump and programmable display. It includes calibration functions, error reporting and dual 4-20mA outputs. An RS232 output is included for integration into control systems. Benefits: Greater understanding of your cells and processes Physiological state measurement on-line Scale-up and scale-down predictions Batch variation studies: feature analysis Metabolic flux analysis and mass-balance calculations Accurate fed-batch control Batch variation studies: anomaly analysis Metabolic activity based feeding Dedicated, continuous, standard signals for all your reactors On-line information, allows real-time calculation of RQ, CER, OUR, growth rate, KLa, etc. Cpodpfxexx Aqyo Afnou 0-10V and 4-20mA, with RS232 on PRO & Multiplex Integrates to any reactor size (250ml – 100m3) Specifications: Feature CO2 O2 Measurement Principle: Infrared Absorption Electrochemical Range: 0-5%, 0-10%, 0-20% 0-30%, 0-50%, 0-100% Resolution: 0.01% 0.01% Accuracy: ±2% of full scale ±2% of full scale Drift:

Condition: used, This listing is for a Analox GM8 Micro-Stat. Cpodpfoxxza Tox Afnju The unit is in full working condition and is ready for immediate release. Unlock precision in your analytical processes with the Analox GM8 Micro Stat! This versatile instrument is designed for fast and accurate measurements, catering to a variety of applications. Applications: Methanol Measurement: Ideal for monitoring methanol levels in Pichia pastoris expression systems and ensuring beverage quality control when dosing with Dimethyl dicarbonate (DMDC). Lactate Analysis: Efficiently analyzes blood lactate levels, providing reliable results that compare favorably to traditional laboratory methods across various conditions. Key Features: Rapid and Accurate: Delivers swift measurements of both methanol and lactate, enhancing productivity in your testing processes. User-Friendly Design: Perfect for field or lab use, this device simplifies blood lactate measurement without compromising accuracy. Versatile Conditions: Operates effectively in diverse environments, including hot and humid settings, ensuring reliable performance wherever you are. Elevate your analytical capabilities with the Analox GM8 Micro Stat—the trusted choice for precise measurements in various critical applications!

Condition: used, This listing is for a Drager Accuro Gas Detector Pump. The unit is in full working condition and is ready for immediate release. The Drager Accuro Gas Detector Pump is a robust and versatile manually operated bellows pump, tailored for effective gas detection in challenging environments. Key Features: Manual Operation: Designed for manual use, this pump requires no external power supply, making it ideal for potentially explosive atmospheres where electrical equipment may pose a risk. One-Handed Operation: Its ergonomic design allows users to operate the pump with one hand, facilitating gas detection in confined or hard-to-reach spaces, such as narrow pipelines or cramped industrial areas. Calibrated 100 mL Sample: The pump accurately draws a 100 mL sample through the gas detection tube, ensuring precise measurements for a wide range of gases. Pressure-Controlled End of Stroke Indication: This feature provides a clear signal when the sample has been drawn, enhancing user confidence that the measurement is complete and accurate. Compatibility: The pump is compatible with over 500 different short-term gas detection tubes, offering extensive versatility across various applications. Benefits: Fast Measurement: Users can perform gas measurements quickly, which is critical in time-sensitive situations such as emergency response or environmental monitoring. Reliable Measurements: The design ensures dependable operation, even in difficult-to-access locations, making it suitable for a range of industries, including manufacturing, construction, and environmental science. Cost-Effective: Cpjdpfexxy Txex Afnsu The manual operation and compatibility with numerous gas detection tubes provide a budget-friendly solution for regular gas monitoring without needing elaborate electronic equipment. Easy to Use: Minimal training is required to operate the pump, making it accessible to a broader range of users and reducing downtime. Applications: Industrial Safety: Ideal for monitoring gas levels in manufacturing plants, warehouses, and construction sites. Environmental Monitoring: Useful for assessing air quality in potentially hazardous or remote locations. Emergency Response: Essential for first responders evaluating hazardous gas situations in emergencies.

Condition: used, This listing is for the ATI Porta Sens 11 Gas leak detector The unit is in full working condition and is ready for immediate use Key Specifications (PortaSens II) Sensor Compatibility: Accepts H10 “Smart Sensor” modules for detecting over 30 different gases, including toxic, flammable gases, and oxygen. Range & Accuracy: Accuracy typically within ±5% of the measured value (dependent on sensor). Cpsdpfoxv Dh Iox Afneu Display: Backlit graphics LCD for clear visibility in varying lighting. Alarms: Three levels of gas concentration alarms, low flow alarm, and low battery alarm. Sampling Modes: Supports both instantaneous and timed sampling. Data Logging: Stores up to 12,000 data points with customizable intervals (1–60 minutes). Power Supply: D-cell alkaline battery (75 hours) and NiCad rechargeable backup (6 hours). Pump: Internal rotary vane pump (~400 cc/min flow rate). Operating Range: -25°C to 55°C; 0–95% RH (non-condensing) Size & Weight: 3.5″ W x 9″ H x 5.5″ D; ~7 lbs

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Cpjdpfoxhdqtox Afnsu Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis

Condition: used, This listing is for the ATi f12/D Gas transmitter The units are in full working condition and ready for immediate use ATi F12/D Gas Transmitter Overview The Series F12D Gas Transmitter is designed for detection of a variety of toxic gases in hazardous area applications. In addition, it is also well suited for general-purpose environments where toxic gas measurement is required. The F12D is highly customizable, making it adaptable to nearly every fixed-mount toxic gas monitoring application. Key Features Cpedoxv Dnzepfx Afneu Extensive Gas Detection Supports over 60 interchangeable electrochemical sensors for detecting gases such as chlorine, ammonia, hydrogen sulfide, formaldehyde, nitric oxide, phosgene, and more. Auto-Test Function An integrated Auto-Test system uses a real gas sample to verify sensor function—eliminating the need for manual bump tests and ensuring operational integrity. Smart Sensor Technology H10 Smart Sensors store their own calibration data and can be swapped out in the field without recalibration, reducing maintenance time and cost. Rugged, Durable Design The F12D features a polycarbonate enclosure with stainless steel hardware, IP65 ingress protection, and is corrosion-resistant for harsh environments. Flexible Power Supply Options Operates on 12–24 VDC, 115 VAC, or 230 VAC to suit various site requirements. Communication Capabilities Offers RS-232/485 output and optional HART® or Modbus RTU for seamless integration into digital control systems. Highly Customizable for Diverse Applications The F12D offers broad configuration options, making it suitable for: Hazardous Areas (e.g., chemical plants, refineries) General Industrial Use (e.g., wastewater treatment, food & beverage, laboratories) Customization Options Include: Sensor Holder Styles Integral mount Remote mount (6 ft cable) Duct mount Auto-Test Gas Generators Available for chlorine, ammonia, hydrogen sulfide, sulfur dioxide, and others. Digital Interface Upgrades Optional HART and Modbus interfaces for advanced integration and data transmission

Condition: new, Pit furnace, make VEI type: SCO_EB clear height: 1200mm Cpedeg R Snhjpfx Afnou clear diameter: 1400 mm outer diameter: 2200 mm outer height (lidless): 1650mm outer height (with lid): 2600mm electrically heated: 64,5 kW fan: 5,5 kW connection: 400 V, 50 Hz temperature: max. 750°C

Condition: new, El. heated chamber furnace, make VEI Cjdpfxjipvgij Afnepu type: KO_EB recirculation: horizontal airflow max. furnace temperature : 650°C internal dimensions (w x h x t): 800 x 800 x 1000 mm heating power: 51 kW fan power: 5,5 kW connected load: 61 kVA

Condition: new, El. heated chamber furnace type: VEI_KO_EB max. temperature: 450°C Cpsdpfx Afehlp U Djnsu connected load: 28 kVA air flow: horizontal usable dimensions (w x h x d): 600 x 500 x 2000 mm

Condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar Codpfx Afed Sg Hhsnjpu PLC: Siemens S7

Condition: new, Gas-heated bogie hearth drying oven (not for flammable paint) Cpjdjcmrxdepfx Afnju temperature max.: 420°C burners heating power:300 kW divided on 2 burners / zones circulation fans: 2 x 5,5 kW = 11 kW el. total connected load: approx. 15 kVA control zones: 2 PLC: Siemens S7 approx. external dimensions (w x h x d): 4700 x 4200 x 6000 mm length with extended bogie hearth: 11.000 mm internal dimensions (without bogie hearth) width: 4000 mm hight: 2900 mm (2500 mm usable with bogie hearth) lenght: 4000 mm max. charging weight:20.000 kg net

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Cpodeygw S Aspfx Afnju

Condition: good (used), functionality: fully functional, overall weight: 35 kg, total length: 410 mm, total width: 820 mm, total height: 700 mm, Heidebrenner TKO 71 - 2-burner gas stove for natural gas Codpfoyakklsx Afnopu Stainless steel construction with chassis Rated thermal load: 2 x 3.8 kW Dimensions: 820 x 410 x 700 mm (W x D x H) Used equipment Visit our showroom!

Condition: used, Year of construction: 2008, Manual gas console Manufacturer: Kjellberg Type: PGE-HM Year of manufacture: 2008 Cpjdpfx Ajxx Ul Asfnou For power source HiFocus 160i The following parts are also available: Plasma gas connection unit PGA-HM Plasma ignition unit PZ-H Hose package 3226ä

Condition: excellent (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 0324R004636, power: 349 kW (474.51 HP), pressure: 6 bar, temperature: 110 °C, tank capacity: 495 l, fuel: domestic gas H, operating pressure: 6 bar, RIELLO RTS349 3S boiler. Cpsdsx R Uinjpfx Afnju Year of manufacture: 2022. Low hours of operation: 500 hours. Option to purchase the complete bottle washing line: PAC washer (4,500 bottles/hour), air blower, RIELLO boiler, conveyors.

Condition: used, Year of construction: 2003, fuel type: diesel, weight max. in kg 2000 kg stroke 3830 mm fork length 1200 mm weight of the machine ca. 3200 kg dimensions of the machine ca. H2425 mm Load center 500 mm Cedovuz I Tepfx Afnjpu Mast Simplex mast trailer hitch Rubber-mounted steering axle 4-fold super elastic tires

Condition: used, -12 loading mouths/openings Cpedpfxox Up Nws Afnsu -4 decks -Integrated loader elevator -Operates on wood and gas -Sold with gas burner -With mechanical control -Voltage: 400V

Condition: good (used), Anvil with base -LxWxH: 1000x350x360 mm (anvil dimensions) -Weight approx. 300 kg Cjdsx N Ew Topfx Afnopu Subject to errors and input mistakes.

Year of construction: 2014, condition: excellent (used), Oven volume: 2.366 m³ l Max. temperature: 750 °C Connected load: 84 kW Weight: 3.7 t Cpsdpfjydl Iasx Afnou

Year of construction: 1996, condition: ready for operation (used), Useful dimensions: 700 x 650 x 1,100 mm Cedpfoydlqhsx Afnjpu Batch weight: 800 kg Temperature: max. 1,000 °C Heating: Natural gas heated Quench: Oil/Air Equipment: Control Siemens Simatic

Year of construction: 1994, condition: good (used), The system consists of: - 2 pieces of hardening ovens (1 x 10 Cg = 1,000 ° C; 1 x 11Cg = 1,100 ° C) - 1 piece tempering furnace (6 Cg = 650°C) Cedpfxeydlpkj Afnjpu - 1 piece of salt bath - 1 piece of oil bath - 2 washing machines (one per bathroom) - 1 piece charging machine - 2 parking spaces - Fumigation boards per system - Processing plant for salt - 9 preparation spaces - Base grid with cargo carrier - Capacity pto batch 165 kg - Usable dimensions = 400 x 400 x 600 (l x w x h) - Control Siemens S7

Year of construction: 2002, condition: excellent (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine Cpedpfoydll Ssx Afnou - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1997, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg Cpsdsydlllopfx Afnou - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1973, condition: good (used), rust size: 700 x 650 x 1.100 mm batch weight: 1.000 kg Temperature: Max. 750 °C connected load: 78 kW Cpodpfx Afeydld Ijnsu Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen